Doing a project between multiple people, and a few components (web app, services app and some others). We will be storing some information inside the Content folder of the web app so it can be accessed directly from the web server with an href, however other components outside of the web app need to access this folder as well, and since we are sharing the project between multiple people using an absolute path is not an option. What options do we have?
EDIT: Trying to explain it a little better.
What i have exactly is, a web project, a "data project" which is just a dll, a "logic" project which is another dll and a services project which is an exe/service.
Both the web project and service project consumes the methods from the logic, and the logic from the data project. Being the last one the responsable for storing data (in a database) and also in the file system.
This "filesystem" path should be configurable, and we are aiming to put it into the content folder of the web project so multimedia files can be accessed directly rather than doing a byte stream.
Now in the web.config(config file of the web app), and app.config(config file of the services app) i could set the absolute path to web/content (the same for both config files) and the data dll would use it without problems. Now the main problem is that we cannot put an absolute path in the config file because each person works on a different computer with obviously different file paths. So if i could just write something like: ~/project/Web/Content rather than C:/myfolder/stuff/blabla/project/web/content in the config files, with ~ resolving the path to the project, this is what i want! Or maybe better ideas about how to share a folder with these apps without adding absolute paths hardcoded somewhere.
What you want to use is:
Server.MapPath("/Content/filepath.ext");
This will give you the absolute path of a file based on it's position within the website, in this case, from the /Content directory.
For a program external to the website, you have a couple options;
The easiest to implement might be a simple configuration value in the external program which points to the directory. My guess is you've already decided that's not ideal, but it may be the quickest way.
Alternatively, there's a Microsoft .NET assembly which gives you easy access to IIS information (I can't recall its name off the top of my head!). You could use this assembly to find the appropriate website, and retrieve its root directory. I'll see if I can find it and get an example, or maybe someone else will see this and post an answer with that information.
Please check the following method "ResolveClientUrl"
MSDN
Use the ResolveClientUrl method to return a URL string suitable for use by the client to access resources on the Web server, such as image files, links to additional pages, and so on.
http://msdn.microsoft.com/en-us/library/system.web.ui.control.resolveclienturl.aspx
Related
I am having trouble accessing information on the server my website it on. As the website was originally programmed with VB.Net, I cannot change the language without having to completely reboot the website. The way the website and server are configured, I can only use ASP.Net and VB.Net.
I am needing to add a section where they can create folders, edit folder names, and upload pictures and text documents on the server through the public website. I tried using parts of the FileIO, Server, and Http that should have worked, but none of them did. Most of my research is about local files and text documents.
I have not been able to find any information that works. Can someone help me? Thank you.
Firstly, creating a virtual directory in ISS mapped to somewhere on your disk would be a good start. This way you have a separate folder for user data in a folder with write access (make sure IIS has write access to the folder!), and the folder is not affected by website deployments.
Secondly, you might need to resolve absolute path for most of the System.IO.File calls. See How to convert a relative path to an absolute path in a Windows application?, just you will need to convert this code to VB.
I'm developing a web application in which users uploads images and I'm keeping the location of the uploaded image path on server. For example:
C:\fix_directory\a8531.jpg
In my page, I want to display this image but I couldn't. I've tried many things but couldn't find a way of doing it.. This directory isn't part of my project because it will be always updated.
What is the effective way of overcoming this problem?
Thank you
You could setup a virtual directory (yourweb.com/images) which points to your images, or even a web (cdn.yourweb.com).
You could also write a HTTP handler or a file handler (.ashx) in ASP.NET to serve your images from that location.
Update
I guess the most effective way of overcoming this problem would be to store the uploaded files simply somewhere in your web directory.
Update 2
I'm definitley sure, the most effective way of overcoming this problem is to have a real IIS or a Visual Studio Development Server and not trying to do anything with the Vista Home Basic pseudo IIS which can do nothing.
The simplest way would be to make fix_directory a virtual directory within your project inside of IIS, and access the images that way.
A more complex approach would be to do something in the lines of pulling in your image via a FileStream, and outputting it to your website via a ResponseStream.
A common way this is achieved is by creating a generic handler (.ashx) that's only responsibility is to output your images.
I am working with two different web sites in asp.net. In the first project i upload some images to a specific folder under the project root and save just the filename in the database, now i am trying to display this images at some page of the second project I know the filename from the database and the image folder as absolute pat but I have not been able to display the image, even thought when looking in firebug the image src is correct src="D:/MyFolder/image.jpg" the image does not display, probably because it is not pointing in the right directory.
I have also tried using Server.MapPath and then my D location but still no success.
I am sure someone has faced the same situation before and was really hoping to get some hint to manage this.
Thank you in advance
I found my solution, strange but i didn't catch it before. Uploaded pictures under a project can always be accessed using the url of the project http://www.yourwebsite.com/images/photo.png now in the second project you can use reference the images using this url and concatenating the file name which i store on database. I think this is the best solution and without changing the code access security which i think can bring other problems with it. Anyway thank you guys.
If you want to display the image that is not in your project (I mean it is present in some other project or some other drive) just create the virtual directory in IIS
Go to "Run", type inetmgr
Right click on your project and add virtual directory
Give alias name and path so that it acts like folder in your project
I don't think you can serve files outside of your application path by default. It's called Code Access Security. You can read up on it here:
http://msdn.microsoft.com/en-us/library/930b76w0.aspx
You can fix this by changing your trust level to High in your web.config:
http://msdn.microsoft.com/en-us/library/tkscy493.aspx
I wouldn't recommend doing this for any site that is externally accessible. In fact, depending on how/where you're hosting your application, this option may be restricted.
You can only "link" to files that exist relative to the same project or are hosted on another site via an absolute URL.
If you want to service files outside the application/website (on disk or in a database) you will need to build a mechanism that gets the file and binary writes it to the browser, setting the MIME type etc. This is best done using an HttpHandler.
edit I do not want to redirect pages, specific files etc. I would like to change the path where images, videos and other media are stored from the root source directory to the directory of my choosing. In this case c:/dev/prjfiles/prjname/public (c:/dev/prjfiles/prjname/ is my working directory) and i except when my html does img src="/pic.png" it will find the image in c:/dev/prjfiles/prjname/publi/pic.png. I need a working solution, i tried looking at how to set virtual directories and etc. I cant figure it out. Thus the bounty. I am generating the html, i am not writing asp:image runat="server" etc i am pulling data from a DB and outputing the html. The part that is still a WIP is the code that handles POST request. The html already exist but i cant have hundreds of files in site.com/here pollution my source directory (c:/dev/trunk/thisprj/thisprj/where my .aspx files are and i do not wish 500 .png/gif/jpg here)
I dont know how asp.net environments are usually set up. I am assuming i have a root path that is not available from the web, a bin/ where i may put my asp.net dll and a public where i stick in any files i want.
I would like to have my project files seperated from everything else. My JS, css and image files are in prjfiles/prjname/public with my sqlite db in prjfiles/prjname/ and extra binaries in prjfiles/prjname/bin.
The problem comes when i run my app and try to load an image. Such as /cssimg/error.png. My project does not find resource in my /public folder and i have no idea how to make it find them. How can i set my project up so it does?
NOTE: I set the working directory path so its at prjfiles/prjname/. In code i write ./bin/extrabin.exe and db.sqlite3 which access the files properly.
You might want to watch the getting started videos for ASP.NET
http://www.asp.net/get-started/
EDIT: More info added
As #Murph suggests, your assumptions are incorrect.
IIS takes care of blocking HTTP access to any important files and folders like your *.aspx.cs, and *.cs in the App_Code, any DLLs, anything under the App_Data directory and the web.config.
Content files, such as *.html, *.css, *.js, .gif, .jpg, .png are all served in the normal manner.
In this way, there is no need for a "public" folder.
I dont know how asp.net environments are usually set up. I am assuming i have a root path that is not available from the web, a bin/ where i may put my asp.net dll and a public where i stick in any files i want.
This is wrong assumption!
You have a root folder, which IS available in public. You set IIS or ASP.NEt Development Server to this folder.
(optional, but always needed) You have a web.config file in this root folder for configuration
You have a bin folder for your assemblies (each page or user control "include" compiles to a class)
(optional) You have App_Data as default folder for file-based DBs and/or other data files (say XML storage, ..)
(optional) You have an App_theme folder for styling and images. Read about ASP.NET themes.
(optional) You can add App_Code folder if you want to add classes to be compiled by the server.
You can create folders for scripts, etc...
Normally for complex logic, etc.. you create in a separate project outside the root and reference the result assembly in the bin folder.
Seriously, you cannot do ASP.NET work without an IDE or a manual. Visual Web Developer 2008 Express IDE is free and http://asp.net has tons of resources for getting started.
I don't know if I got the question right, but maybe you could try the <BASE> HTML tag.
HTML <base> Tag
"Specify a default URL and a default target for all links on a page"
There's a nice and simple example at W3Schools, check it out.
The negative side is that you need to put a <BASE> tag in each page you want.
It sounds like you should be able to create a virtual directory to do what you're asking -- but it's a very non-standard setup.
Keep in mind that IIS will prevent users from downloading DLLs and other project-level files, so you usually don't need to partition them off in a separate layer.
For example, just have a cssimg folder at the top level of your project, and skip the whole public folder thing.
I see where you're coming from. ASP.NET projects are set up a little differently from how you're treating them, but you can make them work like you want.
The root of an ASP.NET project IS publicly accessible. When you created your WebSite within Visual Studio, it created a default.aspx page right on the root. Are you hosting in IIS? If so, it's set up to serve up default.aspx by default. But I digress.
Here's how to make it work like you want (mostly):
Create a WebSite, then right-click the site and add a folder named "prjfiles". Right-click that folder and make another named "public". Create another subfolder of that one called "cssimg".
Now, if you want to use the image you mentioned, you'd reference it like this: "~/prjfiles/public/cssimg/error.png" (pathing starting with the root) or "./cssimg/error.png" if you're coming from a page in the public folder (relative pathing).
Really, though, you're doing too much work. Here's how to make it work with less effort:
Create your WebSite, right-click the project and add a folder called "cssimg".
Treat the root as you would the "public" folder- put your pages right there on the root or in subfolders, as needed. You can reference that same image file like this now: "./cssimg/error.png" (relative) or "~/cssimg/error.png" (start from root)
There's also another way to tell the engine where to look for resources, but it's for your css files. Inside the "head" tag, you can add a "style" element (with type="text/css") and inside that you can add something like this: #import '<%= ResolveUrl("~/prjfiles/public/cssimg/styles.css") %>';
Good luck!
If I correctly understood your problem, you're trying to find files which aren't physically stored on a filesystem folder, or stay on a different folder. You can deal with this problems by implementing a UrlRewrite mechanism.
I suggest you to read URL Rewriting in ASP.NET and, after, to take a look into this implementation: A Complete URL Rewriting Solution for ASP.NET 2.0.
If I understand all this correctly (please comment with any correction) right now all your files are together in the root directory and you use <img src="/img.png" /> and it works.
If this is the case, make another directory in the directory the images are in, say call that directory images and put the image files there. now use <img src="/images/img.png" />.
Done.
I know that there at least two approaches to leverage the web.config file:
using the configSource attribute which was introduced in .NET 2.0 - here is a good blog entry about it.
The file attribute of the appSettings tag which lets you point to an external file with a relative path. Described in the MSDN documentation on the appSettings element.
Now, my problem is that both approaches work well only for physical paths. But I need to address a config file which is in a virtual directory.
Which other method could I use to put my config resources in a virtual directory?
Note: I want to do it this way, because I have multiple instances of my web application on the same server (and that on many servers). To keep deployment easy and clean, I want to keep one directory for all the files (aspx, ascx, images, css, js etc.) and point the web apps in IIS for different customers (=domains, https etc.) to this single directory. In every IIS web I would have a virtual directory called "custom" which points to a different folder for each web.
Update: I'd like to point out that this virtual directory "custom" is not suited to contain an inherited web.config - that web.config would be valid only for the custom folder which doesn't contain aspx/ascx files.
I have the same scenario and after reading you post I realised that asp.net won't let you do this for various security reasons.
Therefore I turned to the OS to find an equivalent to the Linux soft link function which in turn led me to the Junction utility from sysinternals. This can create a directory that is actually any other directory on that volume and asp.net can't tell the difference and so happy loads the config sections that are not actually in a subdirectory of you website. Works for me :)
Virtual Directories can be set as applications, and you can just place another web.config there.
It will inherit any changes from the parent config, and you can add custom settings in it.
I was looking to do the same thing but it did not work, so I decided to do the opposite, as you know the web.config can be inherited, so I pointed IIS to a folder containing the client config (connection string, file path etc) files and the website files i put them on a virtual directory with the rest of the webconfig (where it load dll and other application files needed)
So basically i can use the website files to multple clients and the clients with their own Database connection string and other specific client settings.