The Problem:
I installed Multisite on WampServer and when i click on "add site" the page go blank.
Done so far:
Downloaded WampServer.
Configured virtual host.
Downloaded acrylic so i can have wildcard domain.
Create database and installed normal WP
Followed http://codex.wordpress.org/Create_A_Network and updated to MultiSite.
Logged in.
Clicked on My Site -> Network Admin.
Clicked on Sites->Add New.
Entered the required information.
Clicked on "Add Site" waited 40-50 sec.
Page went blank.
If i click on backspace or go back <- in the browser and then click "Add Site" again it works and i am able to visit the site,create post like a normal installation.
Any ideas would be wonderful.
Here are some technical details:
My httpd-vhosts.con look like that:
<VirtualHost *:80>
ServerName smallurl.com
ServerAlias www.smallurl.com *.smallurl.com
DocumentRoot C:/wamp/www2
ErrorLog "C:/wamp/www2/logs/error.log"
CustomLog "C:/wamp/www2/logs/access.log" common
# - A few helpful settings...
<Directory "C:/wamp/www2">
order allow,deny
allow from all
# - Enables .htaccess files for this site
AllowOverride All
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerName localhost
DocumentRoot C:/wamp/www
ErrorLog "C:/wamp/www/logs/error.log"
CustomLog "C:/wamp/www/logs/access.log" common
</VirtualHost>
My AcrylicHost.txt:
127.0.0.1 localhost
127.0.0.1 www.smallurl.com
127.0.0.1 smallurl.com
127.0.0.1 *.smallurl.com
In httpd.conf:
# Virtual hosts #yaniv#
Include conf/extra/httpd-vhosts.conf
rewrite_module is activated.
basically that covers everything.
Any help would be highly appreciated.
under apache|modules turn rewrite on
Related
My wordpress site is working locally in my wamp server, this is hosted on an ec2 instance and domain is maintained in Route 53\cloudfare. The domain is working when i checked it using mxtoolbox. The site was working and live till the time i changed my host file in the server. I removed the host file entries accidentally thinking it is a dev site, however i restored it but still the site is not working and i am getting only the "TOO MANY REDIRECTS" error. The following is the current windows host file details
#
127.0.0.1 localhost
::1 localhost
127.0.0.1 mydomain.com
::1 mydomain.com
I restarted the server and WAMP multiple times but it is not working.
The following is my virtualhost configuration
# Virtual Hosts
#
<VirtualHost *:80>
ServerName localhost
ServerAlias localhost
DocumentRoot "${INSTALL_DIR}/www"
<Directory "${INSTALL_DIR}/www/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride all
Require all granted
</Directory>
</VirtualHost>
#
<VirtualHost *:80>
ServerName mydomain.com
DocumentRoot "c:/wamp/www/sitefolder"
<Directory "c:/wamp/www/sitefolder/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride all
Require all granted
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerName www.mydomain.com
DocumentRoot "c:/wamp/www/sitefolder"
<Directory "c:/wamp/www/sitefolder/">
Options +Indexes +Includes +FollowSymLinks +MultiViews
AllowOverride all
Require all granted
</Directory>
</VirtualHost>`
Clean your cache and browser history first, then try doing it below:
Open your wordpress admin panel --> Settings--> General --> Make sure it points to the correct domain. --> Save
Or go to the wp-config.php file (Try this if the first method fails / can't be accessed)
add:
define('WP_HOME','http://YourDomain.com');
define('WP_SITEURL','http://YourDomain.com');
or
Try to remove or rename default .htaccess
or
Try to disable the plugin (renaming the plugin folder in the "wp-content/plugin/plugin-folder-name" will non-active that plugin. This might solve the problem if the constraints are due to the plugin)
That's a number of ways when I resolve the ERR_TOO_MANY_REDIRECTS problem. Goodluck
I have installed MAMP (free version) on my Mac and I see the Start Page but I have a problem:
I deployed wordpress but browser say unable to connect (basically I cannot see wordpress page in browser).
In Document Root if I put a static html file I am able to see it in the browser. I am also able to see wordpress administrative pages and all other pages but home page. I have 8888 and 8889 for php and mysql ports. I do not know how to debug the issues. php, apache and mysql do not report any particular problems.
I configured virtual hosts following this guide:
http://foundationphp.com/tutorials/vhosts_mamp.php
The strange thing when I put http://localhost:8888/mywebsite in the browser it is redirected to localhost/mywebsite.
In /etc/hosts I have:
127.0.0.1 localhost
In httpd.conf I activated:
Include /Applications/MAMP/conf/apache/extra/httpd-vhosts.conf
and in this file I have:
NameVirtualHost *:8888
<VirtualHost *:8888>
ServerAdmin myuser#gmail.com
DocumentRoot "/Applications/MAMP/htdocs"
ServerName localhost
ErrorLog "logs/mywebsite-error_log"
CustomLog "logs/mywebsite-access_log" common
</VirtualHost>
Hope someone could help.
I found the solution. After several debugging I found that this guide is correct: http://foundationphp.com/tutorials/vhosts_mamp.php
You need: 1. In /etc/hosts add your virtual hosts like:
127.0.0.1 localhost
127.0.0.1 mywebsite
before I only used localhost because I hoped to use this host in browser but I found it's required to define a new host like mywebsite.
In httpd.conf I activated:
Include /Applications/MAMP/conf/apache/extra/httpd-vhosts.conf
In this file I have:
ServerAdmin myuser#gmail.com
DocumentRoot "/Applications/MAMP/htdocs"
ServerName mywebsite
ErrorLog "logs/mywebsite-error_log"
CustomLog "logs/mywebsite-access_log" common
I have IIS enabled (fresh "install") and a port configured XAMPP install with a fresh Wordpress build.
httpd.conf (changes):
Listen 8080
ServerName localhost:8080
httpd-ssl.conf (changes):
Listen 4433
<VirtualHost _default_:4433>
ServerName www.example.com:4433
httpd-vhosts.conf (changes):
NameVirtualHost *:8080
<VirtualHost *:8080>
DocumentRoot "C:/xampp/htdocs"
ServerName localhost
</VirtualHost>
<VirtualHost *:8080>
DocumentRoot "C:/xampp/htdocs/foobar"
ServerName foo.bar
<Directory "C:/xampp/htdocs/foobar">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
hosts (changes):
127.0.0.1 localhost
127.0.0.1 foo.bar
Tests:
http://localhost/
IIS Root (expected)
http://localhost:8080/[dashboard]
XAMPP Root (expected)
http://localhost:8080/foobar
resolves to http://localhost/foobar, displays IIS error page (incorrect, should show the Wordpress install)
http://foo.bar
displays IIS root (incorrect, should show Wordpress install)
http://foo.bar:8080
resolves to http://foo.bar (same result as above)
Honestly, at this point I have no idea what I have setup that is incorrect. I've spent all day reading forums and SO, and I'm not making any headway. Help? Am I making incorrect assumptions on behavior or do I have a mistake in my setup?
Assuming that you want both services running at the same time, that you'll mostly be working with XAMPP. This is my solution:
I'm not a fan of typing in port 8080 whenever I want to be working with XAMPP. So I just changed the post number of IIS to 82.
Start IIS (7) On the left go to YOUR MACHINE > Sites > Default Web Site
Then on the right click on bindings then a window pops up
Click on the first row and edit the port number to anyting but 80 (because 80 is the default port if you don't type in anything in
your browser)
Reset all the settings of httpd.conf, httpd-ssl.conf
Then open httpd-vhosts.conf and put this:
<VirtualHost *:80>
DocumentRoot C:\xampp\htdocs\foobar
ServerName foo.bar
</VirtualHost>
Restart your computer (httpd-vhosts.conf doesn't take effect without)
The file hosts is fine as it is.
I installed XAMPP on my windows server and also installed Wordpress XAMPP module. I also bought a domain to point it to my server ip. Thing is , I want that when people enter mydomain.com , mydomain.com shows in the address bar and that it keeps showing while browsing.
First I tried to point the domain to my ip , and when I go to mydomain.com it shows mydomain.com/xampp
Then I tried to changing:DocumentRoot "C:\xampp\htdocs"
<Directory "C:\xampp\htdocs">
in httpd file in C:\xampp\apache\conf
to
DocumentRoot "C:\xampp\apps\wordpress\htdocs"
<Directory "C:\xampp\apps\wordpress\htdocs">
But this time when I enter mydomain.com it redirects to myipaddress.com/wordpress
All I want is:
1)When someone enters mydomain.com , he will see my wordpress home page.
2)Whenever a user is browsing mydomain.com , he will always see mydomain instead of myipaddress.
Any help would be appreciated.
Regards!
Type this at the bottom of your httpd file:
Alias /wordpress "C:/xampp/htdocs/wordpress/"
<Directory "C:/xampp/htdocs/wordpress/">
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Please take note that the directory that I stated above is a sample of a default directory. I am having a hard time trying to figure out your directory but the above example should make sense. After typing the codes on your httpd file, go to the directory of xamp/apache/conf/extra/ and openup the httpd-vhosts file. Type this at the bottom of the httpd-vhosts file:
NameVirtualHost *:80
<VirtualHost *:80>
ServerName www.yourdomain.com
ServerAlias yourdomain.com
ServerAdmin email#yourdomain.com
DocumentRoot "C:\xampp\htdocs\wordpress"
</VirtualHost>
Double check your host file if you already entered this line:
127.0.0.1 yourdomain.com
Restart your Apache webserver. Hope this helps!
So we all know that to access your site inside htdocs you have to type "localhost/yoursite folder" right? but i have managed to change that by some help of my friend. now my friend is gone so i cant ask him to change it back. Instead of "localhost/yoursite" i can access it through "mysite.test" it has something to do with host.txt in system32. Now the problem is im installing a new drupal site in htdocs again and i cant access it since my localhost is always pointing to my first drupal site. how do i configure this?
HERE'S MY HOST.TXT
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost
127.0.0.1 activate.adobe.com
127.0.0.1 drupal6.test
127.0.0.1 belmark.test
drupal 6 is my previous site. and belmark.test is the site i want the localhost to direct to which is not working. even if i omit the drupal6.test line localhost still directs to drupal6.test
and here's my httpd-vhost.conf
<VirtualHost *:80>
ServerAdmin cadaybelmark#gmail.com
DocumentRoot "C:/xampp/htdocs/drupal6"
ServerName drupal6.test
ServerAlias drupal6.test
ErrorLog "logs/drupal6.test-error.log"
CustomLog "logs/drupal6.test-access.log" combined
</VirtualHost>
<VirtualHost *:80>
ServerAdmin cadaybelmark#gmail.com
DocumentRoot "C:/xampp/htdocs/drupal7"
ServerName belmark.test
ServerAlias belmark.test
ErrorLog "logs/drupal.test-error.log"
CustomLog "logs/drupal.test-access.log" combined
</VirtualHost>
You need to configure apache (via xampp) with additional vhosts, one for each site.
A vhost configuration maps a ServerName with a DocumentRoot. For example,
ServerName localhost
DocumentRoot /path/to/my/drupal
If you want a new, second site, you will need a second vhost for it. If you simply want to replace the original site with a new Drupal installation, your original vhost can stay the same (as long as you put in the exact same place as the original, which it sounds like you did not, since the old site is still loading).
See the XAMPP documentation for how to add/edit vhost entries.
not sure if i understood your problem right
create a subfolder in htdocs and install it there.
127.0.0.1/subfolder/yoursite
My god the answer is so simple. Apache just needs to be restarted. OK! thanks for the efforts guys.