I can't seem to figure out how to run this code using Inno Setup (below). I'm trying to install IIS7+. If I run it directly in the cmd prompt, it runs fine but because of the "start" part at the beginning, I'm a little confused on how to run it from Inno Setup. I can run any other exe that I've needed but pkgmgr.exe doesn't see to play nice.
start /w pkgmgr /l:log.etw /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-HttpRedirect;IIS-ApplicationDevelopment;IIS-ASPNET;IIS-NetFxExtensibility;IIS-ASP;IIS-CGI;IIS-ISAPIExtensions;IIS-ISAPIFilter;IIS-ServerSideIncludes;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-HttpTracing;IIS-CustomLogging;IIS-Security;IIS-BasicAuthentication;IIS-URLAuthorization;IIS-RequestFiltering;IIS-IPSecurity;IIS-Performance;IIS-HttpCompressionStatic;IIS-HttpCompressionDynamic;IIS-WebServerManagementTools;IIS-ManagementConsole;IIS-ManagementScriptingTools;IIS-ManagementService;IIS-IIS6ManagementCompatibility;IIS-Metabase;IIS-WMICompatibility;IIS-LegacyScripts;IIS-LegacySnapIn;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI
UPDATE 1
I tried this code and got the error below:
[Run]
Filename: "{sys}\pkgmgr.exe"; Parameters: "/l:log.etw /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-HttpRedirect;IIS-ApplicationDevelopment;IIS-ASPNET;IIS-NetFxExtensibility;IIS-ASP;IIS-CGI;IIS-ISAPIExtensions;IIS-ISAPIFilter;IIS-ServerSideIncludes;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-HttpTracing;IIS-CustomLogging;IIS-Security;IIS-BasicAuthentication;IIS-URLAuthorization;IIS-RequestFiltering;IIS-IPSecurity;IIS-Performance;IIS-HttpCompressionStatic;IIS-HttpCompressionDynamic;IIS-WebServerManagementTools;IIS-ManagementConsole;IIS-ManagementScriptingTools;IIS-ManagementService;IIS-IIS6ManagementCompatibility;IIS-Metabase;IIS-WMICompatibility;IIS-LegacyScripts;IIS-LegacySnapIn;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI"; Description: "Install IIS";
Operation failed with 0x8007000B An attempt was made to load a program with an incorrect format.
If I run the original start /w pkgmgr... line in the cmd prompt, it installs it perfectly. (I have a VM with a clean snapshot that I restore to before each time I run a test)
UPDATE 2
Including Inno Setup logging of the error
...
2013-04-19 09:21:04.813 Filename: C:\Windows\system32\pkgmgr.exe
2013-04-19 09:21:04.813 Parameters: /l:log.etw /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-HttpRedirect;IIS-ApplicationDevelopment;IIS-ASPNET;IIS-NetFxExtensibility;IIS-ASP;IIS-CGI;IIS-ISAPIExtensions;IIS-ISAPIFilter;IIS-ServerSideIncludes;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-HttpTracing;IIS-CustomLogging;IIS-Security;IIS-BasicAuthentication;IIS-URLAuthorization;IIS-RequestFiltering;IIS-IPSecurity;IIS-Performance;IIS-HttpCompressionStatic;IIS-HttpCompressionDynamic;IIS-WebServerManagementTools;IIS-ManagementConsole;IIS-ManagementScriptingTools;IIS-ManagementService;IIS-IIS6ManagementCompatibility;IIS-Metabase;IIS-WMICompatibility;IIS-LegacyScripts;IIS-LegacySnapIn;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI
2013-04-19 09:21:07.372 Process exit code: 11
2013-04-19 09:21:07.372 Need to restart Windows? No
2013-04-19 09:21:08.464 Deinitializing Setup.
2013-04-19 09:21:08.479 Log closed.
UPDATE 3
I added the code that mirtheil suggested (with a couple of minor syntax tweaks) and I'm getting closer!
Filename: "pkgmgr"; Parameters: "/l:log.etw /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-HttpRedirect;IIS-ApplicationDevelopment;IIS-ASPNET;IIS-NetFxExtensibility;IIS-ASP;IIS-CGI;IIS-ISAPIExtensions;IIS-ISAPIFilter;IIS-ServerSideIncludes;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-HttpTracing;IIS-CustomLogging;IIS-Security;IIS-BasicAuthentication;IIS-URLAuthorization;IIS-RequestFiltering;IIS-IPSecurity;IIS-Performance;IIS-HttpCompressionStatic;IIS-HttpCompressionDynamic;IIS-WebServerManagementTools;IIS-ManagementConsole;IIS-ManagementScriptingTools;IIS-ManagementService;IIS-IIS6ManagementCompatibility;IIS-Metabase;IIS-WMICompatibility;IIS-LegacyScripts;IIS-LegacySnapIn;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI"; Description: "Install IIS"; Flags: 64bit; Check: IsWin64;
Filename: "pkgmgr"; Parameters: "/l:log.etw /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-HttpRedirect;IIS-ApplicationDevelopment;IIS-ASPNET;IIS-NetFxExtensibility;IIS-ASP;IIS-CGI;IIS-ISAPIExtensions;IIS-ISAPIFilter;IIS-ServerSideIncludes;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-HttpTracing;IIS-CustomLogging;IIS-Security;IIS-BasicAuthentication;IIS-URLAuthorization;IIS-RequestFiltering;IIS-IPSecurity;IIS-Performance;IIS-HttpCompressionStatic;IIS-HttpCompressionDynamic;IIS-WebServerManagementTools;IIS-ManagementConsole;IIS-ManagementScriptingTools;IIS-ManagementService;IIS-IIS6ManagementCompatibility;IIS-Metabase;IIS-WMICompatibility;IIS-LegacyScripts;IIS-LegacySnapIn;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI"; Description: "Install IIS"; Flags: 32bit; Check: not IsWin64;
I still get an error though. The message box that popped up said Operation failed with 0x80070057 The parameter is incorrect. The log shows Process exit code: 87. Is there somewhere that shows what each Process Exit code means?
Including Inno Setup logging of the error:
...
2013-04-19 10:03:50.686 -- Run entry --
2013-04-19 10:03:50.686 Run as: Current user
2013-04-19 10:03:50.686 Type: Exec
2013-04-19 10:03:50.686 Filename: pkgmgr
2013-04-19 10:03:50.686 Parameters: /l:log.etw /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-HttpRedirect;IIS-ApplicationDevelopment;IIS-ASPNET;IIS-NetFxExtensibility;IIS-ASP;IIS-CGI;IIS-ISAPIExtensions;IIS-ISAPIFilter;IIS-ServerSideIncludes;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-HttpTracing;IIS-CustomLogging;IIS-Security;IIS-BasicAuthentication;IIS-URLAuthorization;IIS-RequestFiltering;IIS-IPSecurity;IIS-Performance;IIS-HttpCompressionStatic;IIS-HttpCompressionDynamic;IIS-WebServerManagementTools;IIS-ManagementConsole;IIS-ManagementScriptingTools;IIS-ManagementService;IIS-IIS6ManagementCompatibility;IIS-Metabase;IIS-WMICompatibility;IIS-LegacyScripts;IIS-LegacySnapIn;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI
2013-04-19 10:04:13.135 Process exit code: 87
2013-04-19 10:04:13.135 Need to restart Windows? No
2013-04-19 10:04:14.211 Deinitializing Setup.
2013-04-19 10:04:14.227 Log closed.
UPDATE 4
I removed the /l:log.etw parameter and that fixed my issue!
You would use a [Run] section and have it be like:
[Run]
Filename: "pkgmgr""; Parameters: "/l:log.etw /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-HttpRedirect;IIS-ApplicationDevelopment;IIS-ASPNET;IIS-NetFxExtensibility;IIS-ASP;IIS-CGI;IIS-ISAPIExtensions;IIS-ISAPIFilter;IIS-ServerSideIncludes;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-HttpTracing;IIS-CustomLogging;IIS-Security;IIS-BasicAuthentication;IIS-URLAuthorization;IIS-RequestFiltering;IIS-IPSecurity;IIS-Performance;IIS-HttpCompressionStatic;IIS-HttpCompressionDynamic;IIS-WebServerManagementTools;IIS-ManagementConsole;IIS-ManagementScriptingTools;IIS-ManagementService;IIS-IIS6ManagementCompatibility;IIS-Metabase;IIS-WMICompatibility;IIS-LegacyScripts;IIS-LegacySnapIn;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI"; Description: "Install IIS"; Flag: 64bit; Check: IsWin64;
Filename: "pkgmgr""; Parameters: "/l:log.etw /iu:IIS-WebServerRole;IIS-WebServer;IIS-CommonHttpFeatures;IIS-StaticContent;IIS-DefaultDocument;IIS-DirectoryBrowsing;IIS-HttpErrors;IIS-HttpRedirect;IIS-ApplicationDevelopment;IIS-ASPNET;IIS-NetFxExtensibility;IIS-ASP;IIS-CGI;IIS-ISAPIExtensions;IIS-ISAPIFilter;IIS-ServerSideIncludes;IIS-HealthAndDiagnostics;IIS-HttpLogging;IIS-LoggingLibraries;IIS-RequestMonitor;IIS-HttpTracing;IIS-CustomLogging;IIS-Security;IIS-BasicAuthentication;IIS-URLAuthorization;IIS-RequestFiltering;IIS-IPSecurity;IIS-Performance;IIS-HttpCompressionStatic;IIS-HttpCompressionDynamic;IIS-WebServerManagementTools;IIS-ManagementConsole;IIS-ManagementScriptingTools;IIS-ManagementService;IIS-IIS6ManagementCompatibility;IIS-Metabase;IIS-WMICompatibility;IIS-LegacyScripts;IIS-LegacySnapIn;WAS-WindowsActivationService;WAS-ProcessModel;WAS-NetFxEnvironment;WAS-ConfigurationAPI"; Description: "Install IIS"; Flag: 32bit; Check: not IsWin64;
By not having the nowait flag on the Run line, InnoSetup will wait for the IIS to install. Adding the 32bit / 64bit Flag causes InnoSetup to use the proper application and prevents "incorrect format" type errors. The Check parameter makes sure that the program is only run on the proper operating system.
I have not tried this but it should work.
Related
I am running a Gatling test script using Jenkins on a Unix machine. The test and the Simulation passes successfully after which I am seeing the below error marked in bold below also causing the Jenkins build to fail.
Log from the Jenkins build
Reports generated in 0s.
Please open the following file: >/var/lib/jenkins/workspace/gatling_test_job/target/gatling/demoscript-20200930173820423/index.html
[info] Simulation DemoScript successful.
[info] Simulation(s) execution ended.
[success] Total time: 326 s (05:26), completed Sep 30, 2020 5:43:32 PM
>[error] Expected ';'
[error] com.test.performance.DemoScript
[error] ^
Build step 'Build using sbt' changed build result to FAILURE
Build step 'Build using sbt' marked build as failure
I am using build using sbt block in my Jenkins job to trigger the test using the below command
gatling:testOnly com.test.performance.DemoScript
Scala Version is - 2.12.10
Gatling and related libraries - 3.3.1
Build using sbt config in Jenkins
sbt installation in global tool configuration
PHPUnit: 4.8.31
PhpStorm: 2016.1
I'm having issues running PHPUnit from within PhpStorm. From a CMD window, running the test works fine, but the PhpStorm output is this:
"C:\Program Files (x86)\EasyPHP-Devserver-16.1\eds-binaries\php\php704vc14x86x161109103716\php.exe" C:/Users/username/AppData/Local/Temp/ide-phpunit.php --no-configuration "C:\tests"
Testing started at 5:30 PM ...
Warning: PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\EasyPHP-Devserver-16.1\eds-binaries\php\php704vc14x86x161109103716\ext\php_curl.dll' - The specified procedure could not be found.
in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\EasyPHP-Devserver-16.1\eds-binaries\php\php704vc14x86x161109103716\ext\php_curl.dll' - The specified procedure could not be found.
Fatal error: Class 'PHPUnit_TextUI_ResultPrinter' not found in C:\Users\username\AppData\Local\Temp\ide-phpunit.php on line 253 in Unknown on line 0
PHP Fatal error: Class 'PHPUnit_TextUI_ResultPrinter' not found in C:\Users\username\AppData\Local\Temp\ide-phpunit.php on line 253
Process finished with exit code 255
I've included the folder with my phpunit.phar library in PhpStorm:
PhpStorm knows about the include paths, autocomplete works.
The run config looks like this:
The PHP version/install I'm using is the same one.
Windows:
PhpStorm:
Any ideas?
I tried running a script that uses curl from a CMD window and saw that the curl library wasn't loaded.
I did phpinfo(); and saw that the CMD window was using a different PHP installation (I had installed a new EasyPHP version).
I made the windows sys variable PATH point at my old one, then it started throwing some errors about not loading some libraries (php_curl.dll, libssh2.dll), so I moved them from the new install folder to the old one and to Windows\SysWOW64.
Miraculously, the PhpStorm run config was also fixed, which leads me to believe it doesn't use the interpreter I set in its options, but rather the one from PATH..
The PhpStorm output is now:
"C:\Program Files (x86)\EasyPHP-Devserver-16.1\eds-binaries\php\php704vc14x86x161109103716\php.exe" C:/Users/username/AppData/Local/Temp/ide-phpunit.php --no-configuration "C:\tests"
Testing started at 9:22 AM ...
Warning: The use statement with non-compound name 'PHPUnit_Framework_TestCase' has no effect in C:\DummyTest.php on line 3
PHPUnit 4.8.31 by Sebastian Bergmann and contributors.
PHP Warning: The use statement with non-compound name 'PHPUnit_Framework_TestCase' has no effect in C:\DummyTest.php on line 3
No tests found in class "TestDummy".
Time: 372 ms, Memory: 10.00MB
FAILURES!
Tests: 1, Assertions: 0, Failures: 1.
Process finished with exit code 1
When install DotNet Core on my windows 10 laptop(DotNetCore.1.0.0.RC2-VS2015Tools.Preview1),the runtime package setup failed.
I found some error information from the install log file:
web developer tool info:
[037C:1EC0][2016-06-19T11:07:26]e000: Error 0x80070643: Failed to install MSI package.
[037C:1EC0][2016-06-19T11:07:26]e000: Error 0x80070643: Failed to execute MSI package.
[2E70:3228][2016-06-19T11:07:26]e000: Error 0x80070643: Failed to configure per-machine MSI package.
[2E70:3228][2016-06-19T11:07:26]i319: Applied execute package: WebToolsExtensionsVS14, result: 0x80070643, restart: None
[2E70:3228][2016-06-19T11:07:26]e000: Error 0x80070643: Failed to execute MSI package.
[037C:1EC0][2016-06-19T11:07:26]i318: Skipped rollback of package: WebToolsExtensionsVS14, action: Uninstall, already: Absent
[2E70:3228][2016-06-19T11:07:26]i319: Applied rollback package: WebToolsExtensionsVS14, result: 0x0, restart: None
[037C:1EC0][2016-06-19T11:07:26]i351: Removing cached package: WebToolsExtensionsVS14, from path: C:\ProgramData\Package Cache\{1F275091-F18D-37F3-8A70-8E6CE66BB1A8}v14.1.20512.0\
[037C:1EC0][2016-06-19T11:07:26]i372: Session end, registration key: SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{22041006-8484-4b8d-a13c-40189695de2f}, resume: ARP, restart: None, disable resume: No
[037C:1EC0][2016-06-19T11:07:26]i371: Updating session, registration key: SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{22041006-8484-4b8d-a13c-40189695de2f}, resume: ARP, restart initiated: No, disable resume: No
[2E70:3228][2016-06-19T11:07:26]i399: Apply complete, result: 0x80070643, restart: None, ba requested restart: No
Another Solution is to:
go to the folder where you have downloaded the installer
open the command prompt by Shift+right click -> Open command window here
Type - dotnetcore.1.0.0-vs2015tools.preview2 SKIP_VSU_CHECK=1 and hit enter
This should skip the VS update check and start the installation normally.
I was able to fix this issue by
turning off Antivirus
clearing the %temp% folder
running the DotNet Core (DotNetCore.1.0.0.RC2-VS2015Tools.Preview1) again in repair mode
After applying the other answers here the install was still failing for me. Periodically during the install, a pop-up warning dialog would open stating "The account already exists". I reviewed the Programs and Features list and saw 3 different entries for the VS2015Tools preview. I right-click Uninstall'ed each of them (which removed each one almost immediately), and tried the install again. This time it completed without errors.
i'm trying to build an signed apk with visual studio /Cordova template. But i'm receiving this error: ERROR building one of the platforms 1
And : Error MDAVSCLI 1
I´m following this tutorial:
http://taco.visualstudio.com/en-us/docs/tutorial-package-publish-readme/
and my Keystore is like image bellow:
-package-resources:
[aapt] Creating full resource package...
-package:
[apkbuilder] Current build type is different than previous build: forced apkbuilder run.
[apkbuilder] Creating MainActivity-release-unsigned.apk for release...
-post-package:
-release-prompt-for-password:
-release-nosign:
-release-sign:
[echo] Signing final apk...
BUILD FAILED
C:\Users\Leo\AppData\Local\Android\sdk1\tools\ant\build.xml:1135: The following error occurred while executing this line:
C:\Users\Leo\AppData\Local\Android\sdk1\tools\ant\build.xml:1147: C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\"my-release-key.Keystore" (The file name syntax, the name of the directory or volume label incorrect)
Total time: 52 seconds
Picked up _JAVA_OPTIONS: -Xmx512M
C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\cordova\node_modules\q\q.js:126
throw e;
^
Error code 1 for command: cmd with args: /s /c "ant release -f C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\build.xml -Dout.dir=ant-build -Dgen.absolute.dir=ant-gen"
Command finished with error code 1: C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\cordova\build.bat --release
ERROR building one of the platforms : error : C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\cordova\build.bat: Command failed with exit code 1
You may not have the required environment or OS to build this project
MDAVSCLI : error : C:\Users\Leo\Desktop\Mobile\Mooobile\platforms\android\c
I've found a way : removing the quotes in my ant.properties i can build.
good day, I got an issue in creating an android project, Im currently using windows7 with JDK8u40 installed and Im using the latest dalvik sdk. But when I attempted to create an android project, an error was thrown:
* What went wrong:
Execution failed for task ':deleteSrcAndLayout'.
> Directory does not exist: C:\AndroidFX\CodeGenerator\src
Here's the complete error log:
C:\dalvik-sdk\samples\Ensemble8>./gradlew --info createProject -PDEBUG -PDIR=C:/
AndroidFX -PPACKAGE="hello" -PNAME="CodeGenerator" -PANDROID_SDK=C:/AndroidSDK/s
dk -PJFX_SDK=C:/dalvik-sdk -PJFX_APP=C:/Jar -PJFX_MAIN="hello.Hello"
Starting Build
Settings evaluated using empty settings script.
Projects loaded. Root project using build file 'C:\dalvik-sdk\samples\Ensemble8\
build.gradle'.
Included projects: [root project 'Ensemble8']
Evaluating root project 'Ensemble8' using build file 'C:\dalvik-sdk\samples\Ense
mble8\build.gradle'.
Starting file lock listener thread.
All projects evaluated.
Selected primary task 'createProject'
Tasks to be executed: [task ':conf', task ':androidCreateProject', task ':delete
SrcAndLayout', task ':writeAntProperties', task ':updateManifest', task ':update
StringsXml', task ':updateBuildXml', task ':createProject']
:conf (Thread[main,5,main]) started.
:conf
Executing task ':conf' (up-to-date check took 0.0 secs) due to:
Task has not declared any outputs.
====================================================
Android SDK: [C:/AndroidSDK/sdk]
Target: [android-21]
Project name: [CodeGenerator]
Package: [hello]
JavaFX application: [C:/Jar]
JavaFX sdk: [C:/dalvik-sdk]
JavaFX main.class: [hello.Hello]
Workdir: [C:/AndroidFX]
debug: [true]
===================================================
:conf (Thread[main,5,main]) completed. Took 0.078 secs.
:androidCreateProject (Thread[main,5,main]) started.
:androidCreateProject
Executing task ':androidCreateProject' (up-to-date check took 0.0 secs) due to:
Task has not declared any outputs.
Starting process 'command 'C:/AndroidSDK/sdk/tools/android.bat''. Working direct
ory: C:\AndroidFX Command: C:/AndroidSDK/sdk/tools/android.bat create project -n
CodeGenerator -p CodeGenerator -t android-21 -k hello -a Activity
An attempt to initialize for well behaving parent process finished.
Successfully started process 'command 'C:/AndroidSDK/sdk/tools/android.bat''
Error: Package name 'hello' contains invalid characters.
A package name must be constitued of two Java identifiers.
Each identifier allowed characters are: a-z A-Z 0-9 _
Proces
s 'command 'C:/AndroidSDK/sdk/tools/android.bat'' finished with exit value 0 (st
ate: SUCCEEDED)
:androidCreateProject (Thread[main,5,main]) completed. Took 1.375 secs.
:deleteSrcAndLayout (Thread[main,5,main]) started.
:deleteSrcAndLayout
Executing task ':deleteSrcAndLayout' (up-to-date check took 0.0 secs) due to:
Task has not declared any outputs.
:deleteSrcAndLayout FAILED
:deleteSrcAndLayout (Thread[main,5,main]) completed. Took 0.594 secs.
FAILURE: Build failed with an exception.
* Where:
Build file 'C:\dalvik-sdk\samples\Ensemble8\build.gradle' line: 203
* What went wrong:
Execution failed for task ':deleteSrcAndLayout'.
> Directory does not exist: C:\AndroidFX\CodeGenerator\src
* Try:
Run with --stacktrace option to get the stack trace. Run with --debug option to
get more log output.
BUILD FAILED
Total time: 6.531 secs
Please help me!! Im stuck!!!!
I also tried JDK7u75 but it didnt worked!!
I successfully created an android project by editing the createHelloWorld.bat under android-tools in the dalvik-sdk.