I'm using Aptana Studio 3 and am looking for a command that will take me to the previous editor I was in (a la Netbeans ctrl-tab or Eclipse's ctrl-F6). I've tried several commands with promising sounding names but none of them seem to behave properly. Any thoughts?
Go to Windows->Preferences->General->Keys and have a look at the key binding you have set for the commands 'Next Editor' and 'Previous Editor'. Type those commands in the filter search box to save yourself having to scroll.
On Windows the shortcuts for next and previous editor are in fact Ctrl+F6 and Ctrl+Shift+F6 respectively, which also happen to be the defaults in Eclipse. So if your key bindings for those commands are not set then you can set them here.
Related
I'm trying to use Atom 1.8.0 for grokking code, at most a few thousand Java and XML files. When I perform a global search with Ctrl+Shift+F , the results appear in a tab named "Project Find Results". However, if I do another global search the new results appear in the same tab, replacing older results. I'd like Atom to open show results in a new tab every time. Is it possible?
Note: There seems to be a similar feature request here but I cannot access GitHub at work.
(1) For example, I want to set map gd g* in Qt's Fakevim like below but failed.
(2) And also I'd like to set F3 as the save command, how to do it?
(3) In Fakevim, it provides an option "Read .vimrc", but where to find the file .vimrc?
Thank you!
It doesn't look like there is a lot of documentation for FakeVim, so official sources might not exist. Most of this was obtained by experimentation.
If you want to dig deeper, I guess there's no source as official as the actual source: http://qt.gitorious.org/qt-creator/qt-creator/blobs/0809986e501415fe2c8508800b94b5b3169dc048/src/plugins/fakevim/fakevimplugin.cpp
User commands
First off, realize that in Tools>Options>FakeVim>User Command Mapping, you're only setting what your user actions will perform, not how you perform them.
By default, user command #1 is triggered by pressing Alt-V, then 1.
Alt-V, then 2, triggers user action #2, and so on.
You can change the keyboard shortcuts through the general QtCreator configuration interface, under Tools>Options>Environment>Keyboard. There is a "FakeVim" section with all the user actions listed. Select your user action of choice, press the little "erase" icon in the input field under "Shortcut", then press your desired shortcut key, which should appear in the input field.
Second, to finish a command where you would normally press enter, you should literally type in <CR> after the commands. You also need to enter in ':' to enter command mode.
So if you wanted to map the vim save command, ":w", to F3 via FakeVim, you would:
Go to Tools>Options>FakeVim>User Command Mapping.
Enter ":w<CR>" as one of the user commands (say #7).
Go to Tools>Options>Environment>Keyboard.
Find the FakeVim action "UserAction7".
Set F3 as a shortcut for it.
Now, every time you're in the editor, you should be able to click F3 and have the FakeVim :w command execute, which will save your file.
Note that there is also an option to set a shortcut for "Save" directly in the QtCreator keyboard settings, so for this particular shortcut you don't actually need to go through FakeVim.
Setting shortcuts for other vim commands should be similar. Note that you're restricted to the subset of vim commands that FakeVim implements. Refer to the source, linked above, for checking any particular command you're wondering about.
Vimrc file
On Linux this would be ~/.vimrc, a file in the user's home directory. I presume you're asking about Windows.
The best source I can find is this bug report about it being hard to use Fakevim's vimrc on Windows: https://bugreports.qt.io/browse/QTCREATORBUG-8748
Following that, the file Fakevim looks for is ".vimrc" in %USERPROFILE% (you can enter a name like that in Explorer to go to the folder). However, it's tricky to access a file with a name like that on Windows. (Thus why the real vim uses '_vimrc' on Windows -- but FakeVim apparently doesn't, at least at the moment.)
Here is a superuser page with workarounds for how to create such files on Windows: https://superuser.com/questions/64471/create-rename-a-file-folder-that-begins-with-a-dot-in-windows
I want to run my exe after installation using InstallShield.
InstallShield completes the setup correctly but do not run the exe.
I found another way to add an exe in startup but it runs after restart.
I would like it to run without restart.
Is it possible ?
What version and edition of InstallShield are you using? Also what project type are you using? (InstallScript, InstallScript MSI, Basic MSI? )
Assuming Basic MSI, InstallShield has a built-in pattern to support this story:
1) Click on the Project Assistant Tab
2) Click on the Installation Interview Icon (Page)
3) Click Yes for "Do you want to give the users the option to launch your application when the installation completes?
4) Click the browse button to select the EXE that should be the target of the operation.
By default the checkbox (launch program) on the setup complete dialog will not be selected. To select it automatically add the property LAUNCHPROGRAM to the property table and set it to a value of '1'.
Christopher Painter's answer will work for you most of the time. Those are the initial steps to take, but there are some additional details if you find that isn't enough. For instance, skb reported that this didn't work for him. I found that I was in the same boat (even though I've built a dozen other installers which had this work!).
Follow Christopher Painter's instructions.
Click on the "Installation Designer" tab. Within "User Interface" select "Dialogs".
Within "All Dialogs", expand "SetupCompleteSuccess", and select "Behavior".
Select the "Ok" push button control. Then, select "Events". (look to the bottom of the screen where it says Events/Subscriptions/Conditions)
You should have a "DoAction" event, with an "argument" equal to "IS_LAUNCH_MY_PROGRAM_PLEASE" and a "condition" of "LAUNCHPROGRAM". If not - add that. "LAUNCHPROGRAM" refers to the property of that name. It will have a value of 1 if the launch checkbox is selected, and thus meet this condition. IS_LAUNCH_MY_PROGRAM_PLEASE refers to the Custom Action which is launched. If you want, you can change that CA here to make any custom action fire instead. I opted to leave this alone, but replace the CA with one of my own.
Open your list of Custom Actions (Behavior and logic... Custom actions and sequences). You should find a CA there named IS_LAUNCH_MY_PROGRAM_PLEASE. Delete it!
Add your own IS_LAUNCH_MY_PROGRAM_PLEASE CA. Right-click "Custom Action" (the list header) and select the type of CA you want - or launch the wizard. Just be sure to name it "IS_LAUNCH_MY_PROGRAM_PLEASE" if you left the dialog behavior as it defaults.
To launch an exe - with the WORKING DIRECTORY changed (which was the reason my app wouldn't appear, and apparently skb's as well based on the comments) Select "New EXE"..."Path referencing a directory". Change "Return processing" to "Asynchronous (no wait for completion)". Note the "MSI type number" becomes 226. Set the "Working directory" to INSTALLDIR(assuming the program you want to launch should be found in your new program's directory). Set "Filename & command line" to [INSTALLDIR]YourApp.exe.
I am trying to add a shortcut or a button in notepad++ to call an external program on the file I am currently editing.
For example, let's say I have the program "analyzer.jar". I would like to create a button (or shortcut) in notepad++ that would directly run the command "cmd -K java -jar analyzer.jar "$(FULL_CURRENT_PATH)".
Since I haven't found any solution yet, any help would be deeply appreciated :).
Well, in fact I found how easy it is to create a shortcut for a command:
Go in the menu and select "Run → Run..." (or press f5)
Type your command
Click on "Save", and select the keyboard shortcut of your choice
Sometimes, when you look for complicated solutions, you don't see the simple ones...
i use aptana-studio 3 on mac for coding php
my problem is auto-complete does not work
But it works well When I press ctrl-space
The second question
how i can change zen coding key from ctrl-e to ctrl-j
thanks and sorry for my bad English
To change the key-binding, you will have to edit the Zen-Coding 'Ruble'.
As far as I understand, you already have the Ruble in your installed set of Rubles. If not, you will need to grab by clicking 'Command -> Bundle Development -> Install Bundle' and select 'Zen Coding'.
Once you have the Ruble installed, follow the instructions on how to edit the Zen coding Ruble ( http://wiki.appcelerator.org/display/tis/Modifying+an+existing+Ruble ), and edit the 'expand_abbreviation.rb' file ( https://github.com/aptana/zen-coding.ruble/blob/master/commands/expand_abbreviation.rb ).
Note the cmd.key_binding.mac = "M1+E". You just need to set it as cmd.key_binding.mac = "M1+J" and restart the studio.
There has been recent work done in Aptana Studio in making content assist (auto-complete) pop up automatically more often across languages. This should improve in the 3.0.3 release. If you like, you can try beta versions of that by visiting here: http://wiki.appcelerator.org/display/tis/Changing+the+Update+Type