I just spent 20 minutes debugging some (django) unit tests. I was testing a view POST, and I was expecting a 302 return code, after which I asserted a bunch database entities were as expected. Turns out a recently merged commit had added a new form field, and my tests were failing because I wasn't including the correct form data.
The problem is that the tests were failing because the HTTP return code was 200, not 302, and I could only work out the problem by printing out the response HTTP and looking through it. Aside from the irritation of having to look through HTML to work out the problem, a 200 seems like the wrong code for a POST that doesn't get processed. A 4xx (client error) seems more appropriate. In addition, it would have made debugging the test a cinch, as the response code would have pointed me straight at the problem.
I've read about using 422 (Unprocessable Entity) as a possible return code within REST APIs, but can't find any evidence of using it within HTML views / handlers.
My question is - is anyone else doing this, and if not, why not?
[UPDATE 1]
Just to clarify, this question relates to HTML forms, and not an API.
It is also a question about HTTP response codes per se - not Django. That just happens to be what I'm using. I have removed the django tag.
[UPDATE 2]
Some further clarification, with W3C references (http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html):
10.2 Successful 2xx
This class of status code indicates that the client's request was successfully received, understood, and accepted.
10.4 Client Error 4xx
The 4xx class of status code is intended for cases in which the client seems to have erred.
10.4.1 400 Bad Request
The request could not be understood by the server due to malformed syntax.
And from https://www.rfc-editor.org/rfc/rfc4918#page-78
11.2. 422 Unprocessable Entity
The 422 (Unprocessable Entity) status code means the server
understands the content type of the request entity (hence a
415(Unsupported Media Type) status code is inappropriate), and the
syntax of the request entity is correct (thus a 400 (Bad Request)
status code is inappropriate) but was unable to process the contained
instructions. For example, this error condition may occur if an XML
request body contains well-formed (i.e., syntactically correct), but
semantically erroneous, XML instructions.
[UPDATE 3]
Digging in to it, 422 is a WebDAV extension[1], which may explain its obscurity. That said, since Twitter use 420 for their own purposes, I think I'll just whatever I want. But it will begin with a 4.
[UPDATE 4]
Notes on the use of custom response codes, and how they should be treated (if unrecognised), from HTTP 1.1 specification (https://www.rfc-editor.org/rfc/rfc2616#section-6.1.1):
HTTP status codes are extensible. HTTP applications are not required
to understand the meaning of all registered status codes, though such
understanding is obviously desirable. However, applications MUST
understand the class of any status code, as indicated by the first
digit, and treat any unrecognized response as being equivalent to the
x00 status code of that class, with the exception that an
unrecognized response MUST NOT be cached. For example, if an
unrecognized status code of 431 is received by the client, it can
safely assume that there was something wrong with its request and
treat the response as if it had received a 400 status code. In such
cases, user agents SHOULD present to the user the entity returned
with the response, since that entity is likely to include human-
readable information which will explain the unusual status.
[1] https://www.rfc-editor.org/rfc/rfc4918
You are right that 200 is wrong if the outcome is not success.
I'd also argue that a success-with-redirect-to-result-page should be 303, not 302.
4xx is correct for client error. 422 seems right to me. In any case, don't invent new 4xx codes without registering them through IANA.
It's obvious that some form POST requests should result in a 4xx HTTP error (e.g. wrong URL, lacking an expected field, failing to send an auth cookie), but mistyping passwords or accidentally omitting required fields are extremely common and expected occurrences in an application.
It doesn't seem clear from any spec that every form invalidation problem must constitute an HTTP error.
I guess my intuition is that, if a server sends a client a form, and the client promptly replies with a correctly-formed POST request to that form with all expected fields, a common business logic violation shouldn't be an HTTP error.
The situation seems even less defined if a client-side script is using HTTP as a transport mechanism. E.g. if a JSON-RPC requests sends form details, the server-side function is successfully called and the response returned to the caller, seems like a 200 success.
Anecdotally: Logging in with bad credentials yields a 200 from Facebook, Google, and Wikipedia, and a 204 from Amazon.
Ideally the IETF would clear this up with an RFC, maybe adding an HTTP error code for "the operation was not performed due to a form invalidation failure" or expanding the definition of 422 to cover this.
There doesn't appear to be an accepted answer, which to be honest, is a bit surprising. Form validation is such a cornerstone of web development that the fact that there is no response code to illustrate a validation failure seems like a missed opportunity. Particularly given the proliferation of automated testing. It doesn't seem practical to test the response by examining the HTML content for an error message rather than just testing the response code.
I stick by my assertion in the question that 200 is the wrong response code for a request that fails business rules - and that 302 is also inappropriate. (If a form fails validation, then it should not have updated any state on the server, is therefore idempotent, and there is no need to use the PRG pattern to prevent users from resubmitting the form. Let them.)
So, given that there isn't an 'approved' method, I'm currently testing (literally) with my own - 421. I will report back if we run into any issues with using non-standard HTTP status codes.
If there are no updates to this answer, then we're using it in production, it works, and you could do the same.
The POST returns 200 if you do not redirect.
The 302 is not sent automatically in headers after POST request, so you have to send the header (https://docs.djangoproject.com/en/dev/ref/request-response/#django.http.HttpResponse) manually and the code does not relay on data of the form.
The reason of the redirection back to the form (or whatever) with code 302 is to disallow browser to send the data repeatedly on refresh or history browsing.
Related
My team is developing a simple backend service that provides the operations ADD, GET and REMOVE a very simple item. All are triggered by an http request and they do not much besides adding, getting and removing the item from a database.
Regarding the specific scenario in which a REMOVE operation is triggered on a item that is not present in the DB (e.g. was removed before), our question is what should be the response of the service? We having been debating options like 200 + some specific message, 410 - resource gone, amongst other 2XX and 4XX possibilities, but we haven't reached a consensus.
I hope this is not Bikeshedding.
Thank you for your help.
What should be the response of the service?
It's important to highlight that status codes are meant to indicate the result of the server's attempt to understand and satisfy the client request. Having said that, 2xx status codes are unsuitable for this situation and should be avoided:
The 2xx (Successful) class of status code indicates that the client's request was successfully received, understood, and accepted.
The most suitable status code would be in the 4xx range:
The 4xx (Client Error) class of status code indicates that the client seems to have erred. Except when responding to a HEAD request, the server SHOULD send a representation containing an explanation of the error situation, and whether it is a temporary or permanent condition.
The 404 status code seems to be what you are looking for, as it indicates that the server can't find the requested resource:
6.5.4. 404 Not Found
The 404 (Not Found) status code indicates that the origin server did not find a current representation for the target resource or is not willing to disclose that one exists. A 404 status code does not indicate whether this lack of representation is temporary or permanent; [...]
If you are concerned on how the client will understand the 404 reponse, you could provide them with a payload stating that such resource is no longer available.
And just bear in mind that ADD and REMOVE are not standard HTTP methods. Hopefully that was a typo and you are using POST (or PUT) and DELETE to express operations over your resources.
I'm wondering if it is correct to return HTTP 200 OK when an error occurred on the server side (the error details would be contained inside the response body).
Example:
We're sending HTTP GET
Something unexpected happened on the server side.
Server returns HTTP 200 OK status code with error inside a response (e.g. {"status":"some error occurred"})
Is this the correct behavior or not? Should we change the status code to something else than 200?
No, it's very incorrect to send 200 with a error body
HTTP is an application protocol. 200 implies that the response contains a payload that represents the status of the requested resource. An error message usually is not a representation of that resource.
If something goes wrong while processing GET, the right status code is 4xx ("you messed up") or 5xx ("I messed up").
HTTP status codes say something about the HTTP protocol. HTTP 200 means transmission is OK on the HTTP level (i.e request was technically OK and server was able to respond properly). See this wiki page for a list of all codes and their meaning.
HTTP 200 has nothing to do with success or failure of your "business code". In your example the HTTP 200 is an acceptable status to indicate that your "business code error message" was successfully transferred, provided that no technical issues prevented the business logic to run properly.
Alternatively you could let your server respond with HTTP 5xx if technical or unrecoverable problems happened on the server. Or HTTP 4xx if the incoming request had issues (e.g. wrong parameters, unexpected HTTP method...) Again, these all indicate technical errors, whereas HTTP 200 indicates NO technical errors, but makes no guarantee about business logic errors.
To summarize: YES it is valid to send error messages (for non-technical issues) in your http response together with HTTP status 200. Whether this applies to your case is up to you. If for instance the client is asking for a file that isn't there, that would be more like a 404. If there is a misconfiguration on the server that might be a 500. If client asks for a seat on a plane that is booked full, that would be 200 and your "implementation" will dictate how to recognise/handle this (e.g. JSON block with a { "booking": "failed" })
I think these kinds of problems are solved if we think about real life.
Bad Practice:
Example 1:
Darling everything is FINE/OK (HTTP CODE 200) - (Success):
{
...but I don't want us to be together anymore!!!... (Error)
// Then everything isn't OK???
}
Example 2:
You are the best employee (HTTP CODE 200) - (Success):
{
...But we cannot continue your contract!!!... (Error)
// Then everything isn't OK???
}
Good Practices:
Darling I don't feel good (HTTP CODE 400) - (Error):
{
...I no longer feel anything for you, I think the best thing is to separate... (Error)
// In this case, you are alerting me from the beginning that something is wrong ...
}
This is only my personal opinion, each one can implement it as it is most comfortable or needs.
Note: The idea for this explanation was drawn from a great friend #diosney
Even if I want to return a business logic error as HTTP code there is no such
acceptable HTTP error code for that errors rather than using HTTP 200 because it will misrepresent the actual error.
So, HTTP 200 will be good for business logic errors. But all errors which are covered by HTTP error codes should use them.
Basically HTTP 200 means what server correctly processes user request (in case of there is no seats on the plane it is no matter because user request was correctly processed, it can even return just a number of seats available on the plane, so there will be no business logic errors at all or that business logic can be on client side. Business logic error is an abstract meaning, but HTTP error is more definite).
To clarify, you should use HTTP error codes where they fit with the protocol, and not use HTTP status codes to send business logic errors.
Errors like insufficient balance, no cabs available, bad user/password qualify for HTTP status 200 with application specific error handling in the response body.
See this software engineering answer:
I would say it is better to be explicit about the separation of protocols. Let the HTTP server and the web browser do their own thing, and let the app do its own thing. The app needs to be able to make requests, and it needs the responses--and its logic as to how to request, how to interpret the responses, can be more (or less) complex than the HTTP perspective.
I think people have put too much weight into the application logic versus protocol matter. The important thing is that the response should make sense. What if you have an API that serves a dynamic resource and a request is made for X which is derived from template Y with data Z and either Y or Z isn't currently available? Is that a business logic error or a technical error? The correct answer is, "who cares?"
Your API and your responses need to be intelligible and consistent. It should conform to some kind of spec, and that spec should define what a valid response is. Something that conforms to a valid response should yield a 200 code. Something that does not conform to a valid response should yield a 4xx or 5xx code indicative of why a valid response couldn't be generated.
If your spec's definition of a valid response permits { "error": "invalid ID" }, then it's a successful response. If your spec doesn't make that accommodation, it would be a poor decision to return that response with a 200 code.
I'd draw an analogy to calling a function parseFoo. What happens when you call parseFoo("invalid data")? Does it return an error result (maybe null)? Or does it throw an exception? Many will take a near-religious position on whether one approach or the other is correct, but ultimately it's up to the API specification.
"The status-code element is a three-digit integer code giving the result of the attempt to understand and satisfy the request"
Obviously there's a difference of opinion with regards to whether "successfully returning an error" constitutes an HTTP success or error. I see different people interpreting the same specs different ways. So pick a side, sure, but also accept that either way the whole world isn't going to agree with you. Me? I find myself somewhere in the middle, but I'll offer some commonsense considerations.
If your server-side code catches an unexpected exception when dispatching a request, that sounds like the very definition of a 500 Internal Server Error. This seems to be OP's situation. The application should not return a 200 for unexpected errors, but also see point 3.
If your server-side code should be able to gracefully handle a given invalid input, and it doesn't constitute an "exceptional" error condition, your spec should accommodate HTTP 200 responses that provide meaningful diagnostic information.
Above all: Have a spec. Make it consistent. Stick to it.
In OP's situation, it sounds like you have a de-facto standard that unhandled exceptions yield a 200 with a distinguishable response body. It's not ideal, but if it's not breaking things and actively causing problems, you probably have bigger, more important problems to solve.
HTTP Is the Protocol handling the transmission of data over the internet.
If that transmission breaks for whatever reason the HTTP error codes tell you why it can't be sent to you.
The data being transmitted is not handled by HTTP Error codes. Only the method of transmission.
HTTP can't say 'Ok, this answer is gobbledigook, but here it is'. it just says 200 OK.
i.e : I've completed my job of getting it to you, the rest is up to you.
I know this has been answered already but I put it in words I can understand. sorry for any repetition.
This is a theoretical question.
I believe I know the answer but I've received contradicting answers, so I figured I'd ask here.
On the W3C site it says:
Client Error 4xx
The 4xx class of status code is intended for cases in which the client
seems to have erred.
It also says
Server Error 5xx
Response status codes beginning with the digit "5" indicate cases in
which the server is aware that it has erred or is incapable of
performing the request.
I take this to mean that if a request is syntactically correct, but logically wrong, such as an attempt to create an object with an invalid value on a specific property, then my API should throw a 5xx Error, because the server DID understand the request, but found it to be invalid.
I have, on the other hand, been told that it should be a 4xx error (specifically 400 Bad Request) because the logical error was on the client side, as it sent an invalid value in the first place.
So, what error code SHOULD I be reporting?
5xx error will occur when the problem is on the server side. For example when you make a request with a method or protocol which is not understood by the server, when the proxy did not respond, etc. Per short: when the server was unable to fulfill the request.
In your example a 4xx error is more appropriate, because the request initiator is the source of the problem. More specific, "422 Unprocessable Entity" error is appropriate, because as RFC 4918 states:
The 422 (Unprocessable Entity) status code means the server
understands the content type of the request entity (hence a
415(Unsupported Media Type) status code is inappropriate), and the
syntax of the request entity is correct (thus a 400 (Bad Request)
status code is inappropriate) but was unable to process the contained
instructions.
From various reasons some API designers are trying to limit themselves to a set of 3 - 5 status codes that will be used. In general this is done to ease the work for the API users, which sounds good, but sometimes this philosophy can have bigger implications.
For example, if I send a request to some API to add a new comment, I would expect a few things to be granted, like (but not limited to):
The request is POST or send me back a 405 status if not.
If the comment was added I will get back 201 response with a link to my new comment in the body.
What do I get sometimes ?
If the request method is not POST, I will get a 400 error.
If the request is POST, I will get back a 200 status and sometimes no link to my new comment.
Sounds confusing ? For me it does.
I have several pages designed to be called with AJAX - I have them return an abnormal status code if they can't be displayed, and my javascript will show an error box accordingly.
For example, if the user is not authenticated or their session has timed out and they try to call one of the AJAX pages, it will return 401 Unathorized.
I also have some return 500 Internal Server Error if something really odd happens server-side.
What status code should I return if one of these pages was called without required parameters? (and therefore can't return any content).
I had a look at the wikipedia article on HTTP status codes, but the closest one I could find to the code I'm looking for was this:
422 Unprocessable Entity
The request was well-formed but was unable to be followed due to semantic errors.
Edit: The above code is WebDAV specific and therefore unlikely to be appropriate in this case
Can anyone think of an appropriate code to return?
What status code should I return if one of these pages was called without required parameters? (and therefore can't return any content).
You could pick 404 Not Found:
The server has not found anything matching the Request-URI [assuming your required parameters are part of the URI, i.e. $_GET]. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
(highlight by me)
404 Not Found is a subset of 400 Bad Request which could be taken as well because it's very clear about what this is:
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications.
This is normally more common with missing/wrong-named post fields, less with get requests.
As Luca Fagioli comments, strictly speaking 404, etc. are not a subset of the 400 code, and correctly speaking is that they fall into the 4xx class that denotes the server things this is a client error.
In that 4xx class, a server should signal whether the error situation is permanent or temporary, which includes to not signal any of it when this makes sense, e.g. it can't be said or would not be of benefit to share. 404 is useful in that case, 400 is useful to signal the client to not repeat the request unchanged. In the 400 case, it is important then for any request method but a HEAD request, to communicate back all the information so that a consumer can verify the request message was received complete by the server and the specifics of "bad" in the request are visible from the response message body (to reduce guesswork).
I can't actually suggest that you pick a WEBDAV response code that does not exist for HTTP clients using hypertext, but you could, it's totally valid, you're the server coder, you can actually take any HTTP response status code you see fit for your HTTP client of which you are the designer as well:
11.2. 422 Unprocessable Entity
The 422 (Unprocessable Entity) status code means the server
understands the content type of the request entity (hence a
415(Unsupported Media Type) status code is inappropriate), and the
syntax of the request entity is correct (thus a 400 (Bad Request)
status code is inappropriate) but was unable to process the contained
instructions. For example, this error condition may occur if an XML
request body contains well-formed (i.e., syntactically correct), but
semantically erroneous, XML instructions.
IIRC request entity is the request body. So if you're operating with request bodies, it might be appropriate as Julian wrote.
You commented:
IMHO, the text for 400 speaks of malformed syntax. I would assume the syntax here relates to the syntax of HTTP string that the client sends across to the server.
That could be, but it can be anything syntactically expressed, the whole request, only some request headers, or a specific request header, the request URI etc.. 400 Is not specifically about "HTTP string syntax", it's infact the general answer to a client error:
The 4xx class of status code is intended for cases in which the client seems to have erred. Except when responding to a HEAD request, the server SHOULD include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. These status codes are applicable to any request method. User agents SHOULD display any included entity to the user.
The important part is here that you must tell the client what went wrong. The status code is just telling that something went wrong (in the 4xx class), but HTTP has not been specifically designed to make a missing query-info part parameter noteable as error condition. By fact, URI only knows that there is a query-info part and not what it means.
If you think 400 is too broad I suggest you pick 404 if the problem is URI related, e.g. $_GET variables.
I don't know about the RFC writers' intentions, but the status code I have seen used in the wild for that case is 400 Bad Request.
422 is a regular HTTP status code; and it is used outside WebDAV. Contrary to what others say, there's no problem with that; HTTP has a status code registry for a reason.
See http://www.iana.org/assignments/http-status-codes
Read this carefully:
https://en.wikipedia.org/wiki/List_of_HTTP_status_codes
422 is a WebDAV-specific thing, and I haven't seen it used for anything else.
400, even though not intended for this particular purpose, seems to be a common choice.
404 is also a viable choice if your API is RESTful or similar (using the path part of the URI to indicate search parameters)
Description as quoted against 400
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications.
(Emphasis mine)
That speaks of malformed syntax, which is not the case when the browser sends a request to the server. Its just the case of missing parameters (while there's no malformed syntax).
I would suggest stick with 404 :)
(Experts correct me if I am wrong anywhere :) )
I need to answer this old question because the most upvoted and accepted answer is plain wrong.
From RFC 9110 - HTTP Semantics:
The 400 (Bad Request) status code indicates that the server cannot or
will not process the request due to something that is perceived to be
a client error (e.g., malformed request syntax, invalid request
message framing, or deceptive request routing).
So 400 is what you have to use.
Do not use 404, because you will completely mislead the API consumer. 404 means that the resource was not found on the server:
The 404 (Not Found) status code indicates that the origin server did
not find a current representation for the target resource or is not
willing to disclose that one exists.
The HTTP/1.1 specification (RFC 2616) has the following to say on the meaning of status code 400, Bad Request (§10.4.1):
The request could not be understood by
the server due to malformed syntax.
The client SHOULD NOT repeat the
request without modifications.
There seems to be a general practice among a few HTTP-based APIs these days to use 400 to mean a logical rather than a syntax error with a request. My guess is that APIs are doing this to distinguish between 400 (client-induced) and 500 (server-induced). Is it acceptable or incorrect to use 400 to indicate non-syntactic errors? If it is acceptable, is there an annotated reference on RFC 2616 that provides more insight into the intended use of 400?
Examples:
Google Data Protocol, Protocol Reference, HTTP Status Codes
Status 422 (RFC 4918, Section 11.2) comes to mind:
The 422 (Unprocessable Entity) status code means the server understands the content type of the request entity (hence a 415(Unsupported Media Type) status code is inappropriate), and the syntax of the request entity is correct (thus a 400 (Bad Request) status code is inappropriate) but was unable to process the contained instructions. For example, this error condition may occur if an XML request body contains well-formed (i.e., syntactically correct), but semantically erroneous, XML instructions.
As of this time, the latest draft of the HTTPbis specification, which is intended to replace and make RFC 2616 obsolete, states:
The 400 (Bad Request) status code indicates that the server cannot or
will not process the request because the received syntax is invalid,
nonsensical, or exceeds some limitation on what the server is willing
to process.
This definition, while of course still subject to change, ratifies the widely used practice of responding to logical errors with a 400.
HTTPbis will address the phrasing of 400 Bad Request so that it covers logical errors as well. So 400 will incorporate 422.
From https://datatracker.ietf.org/doc/html/draft-ietf-httpbis-p2-semantics-18#section-7.4.1
"The server cannot or will not process the request, due to a client error (e.g., malformed syntax)"
Even though, I have been using 400 to represent logical errors also, I have to say that returning 400 is wrong in this case because of the way the spec reads. Here is why i think so, the logical error could be that a relationship with another entity was failing or not satisfied and making changes to the other entity could cause the same exact to pass later. Like trying to (completely hypothetical) add an employee as a member of a department when that employee does not exist (logical error). Adding employee as member request could fail because employee does not exist. But the same exact request could pass after the employee has been added to the system.
Just my 2 cents ... We need lawyers & judges to interpret the language in the RFC these days :)
Thank You,
Vish
It could be argued that having incorrect data in your request is a syntax error, even if your actual request at the HTTP level (request line, headers etc) is syntactically valid.
For example, if a Restful web service is documented as accepting POSTs with a custom XML Content Type of application/vnd.example.com.widget+xml, and you instead send some gibberish plain text or a binary file, it seems resasonable to treat that as a syntax error - your request body is not in the expected form.
I don't know of any official references to back this up though, as usual it seems to be down to interpreting RFC 2616.
Update: Note the revised wording in RFC 7231 §6.5.1:
The 400 (Bad Request) status code indicates that the server cannot or will not process the request due to something that is perceived to be a client error e.g., malformed request syntax, invalid request message framing, or deceptive request routing).
seems to support this argument more than the now obsoleted RFC 2616 §10.4.1 which said just:
The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications.
On Java EE servers a 400 is returned if your URL refers to a non-existent "web -application". Is that a "syntax error"? Depends on what you mean by syntax error. I would say yes.
In English syntax rules prescribe certain relationships between parts of speech. For instance "Bob marries Mary" is syntactically correct, because it follows the pattern {Noun + Verb + Noun}. Whereas
"Bob marriage Mary" would be syntactically incorrect, {Noun + Noun + Noun}.
The syntax of a simple URLis { protocol + : + // + server + : + port }. According to this "http://www.google.com:80" is syntactically correct.
But what about "abc://www.google.com:80"? It seems to follow the exact same pattern. But really
it is a syntax error. Why? Because 'abc' is not a DEFINED protocol.
The point is that determining whether or not we have a 400 situation requires more than parsing the characters and spaces and delimiters. It must also recognize what are the valid "parts of speech".
This is difficult.
I think we should;
Return 4xx errors only when the client has the power to make a change to the request, headers or body, that will result in the request succeeding with the same intent.
Return error range codes when the expected mutation has not occured, i.e. a DELETE didn't happen or a PUT didn't change anything. However, a POST is more interesting because the spec says it should be used to either create resources at a new location, or just process a payload.
Using the example in Vish's answer, if the request intends to add employee Priya to a department Marketing but Priya wasn't found or her account is archived, then this is an application error.
The request worked fine, it got to your application rules, the client did everything properly, the ETags matched etc. etc.
Because we're using HTTP we must respond based on the effect of the request on the state of the resource. And that depends on your API design.
Perhaps you designed this.
PUT { updated members list } /marketing/members
Returning a success code would indicate that the "replacement" of the resource worked; a GET on the resource would reflect your changes, but it wouldn't.
So now you have to choose a suitable negative HTTP code, and that's the tricky part, since the codes are strongly intended for the HTTP protocol, not your application.
When I read the official HTTP codes, these two look suitable.
The 409 (Conflict) status code indicates that the request could not be completed due to a conflict with the current state of the target resource. This code is used in situations where the user might be able to resolve the conflict and resubmit the request. The server SHOULD generate a payload that includes enough information for a user to recognize the source of the conflict.
And
The 500 (Internal Server Error) status code indicates that the server encountered an unexpected condition that prevented it from fulfilling the request.
Though we've traditionally considered the 500 to be like an unhandled exception :-/
I don't think its unreasonable to invent your own status code so long as its consistently applied and designed.
This design is easier to deal with.
PUT { membership add command } /accounts/groups/memberships/instructions/1739119
Then you could design your API to always succeed in creating the instruction, it returns 201 Created and a Location header and any problems with the instruction are held within that new resource.
A POST is more like that last PUT to a new location. A POST allows for any kind of server processing of a message, which opens up designs that say something like "The action successfully failed."
Probably you already wrote an API that does this, a website. You POST the payment form and it was successfully rejected because the credit card number was wrong.
With a POST, whether you return 200 or 201 along with your rejection message depends on whether a new resource was created and is available to GET at another location, or not.
With that all said, I'd be inclined to design APIs that need fewer PUTs, perhaps just updating data fields, and actions and stuff that invokes rules and processing or just have a higher chance of expected failures, can be designed to POST an instruction form.
In my case:
I am getting 400 bad request because I set content-type wrongly. I changed content type then able to get response successfully.
Before (Issue):
ClientResponse response = Client.create().resource(requestUrl).queryParam("noOfDates", String.valueOf(limit))
.header(SecurityConstants.AUTHORIZATION, formatedToken).
header("Content-Type", "\"application/json\"").get(ClientResponse.class);
After (Fixed):
ClientResponse response = Client.create().resource(requestUrl).queryParam("noOfDates", String.valueOf(limit))
.header(SecurityConstants.AUTHORIZATION, formatedToken).
header("Content-Type", "\"application/x-www-form-urlencoded\"").get(ClientResponse.class);