I have created a web service in Visual Studio 2012 using the WCF service application template.
Everything works fine, but only if the host appliction is inside the same solution as you can see in this picture:
Bank project is the web service
BankHost project is Windows forms project
but when I am trying to get reference to the service from an ASP.NET MVC 4 project I am getting this error:
This is the web.config file of the web service project
<configuration>
<appSettings>
<add key="aspnet:UseTaskFriendlySynchronizationContext" value="true" />
</appSettings>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5"/>
</system.web>
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceMetadata httpGetEnabled="true" httpsGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
</behaviors>
<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
</protocolMapping>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<directoryBrowse enabled="true"/>
</system.webServer>
</configuration>
This is my web.config file of the MVC 4 project:
<configuration>
<configSections>
<sectionGroup name="system.web.webPages.razor" type="System.Web.WebPages.Razor.Configuration.RazorWebSectionGroup, System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="host" type="System.Web.WebPages.Razor.Configuration.HostSection, System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" />
<section name="pages" type="System.Web.WebPages.Razor.Configuration.RazorPagesSection, System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" />
</sectionGroup>
</configSections>
<system.web.webPages.razor>
<host factoryType="System.Web.Mvc.MvcWebRazorHostFactory, System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<pages pageBaseType="System.Web.Mvc.WebViewPage">
<namespaces>
<add namespace="System.Web.Mvc" />
<add namespace="System.Web.Mvc.Ajax" />
<add namespace="System.Web.Mvc.Html" />
<add namespace="System.Web.Optimization"/>
<add namespace="System.Web.Routing" />
</namespaces>
</pages>
</system.web.webPages.razor>
<appSettings>
<add key="webpages:Enabled" value="false" />
</appSettings>
<system.web>
<httpHandlers>
<add path="*" verb="*" type="System.Web.HttpNotFoundHandler"/>
</httpHandlers>
<pages
validateRequest="false"
pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<controls>
<add assembly="System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" tagPrefix="mvc" />
</controls>
</pages>
</system.web>
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
<handlers>
<remove name="BlockViewHandler"/>
<add name="BlockViewHandler" path="*" verb="*" preCondition="integratedMode" type="System.Web.HttpNotFoundHandler" />
</handlers>
</system.webServer>
</configuration>
Check your .svc file - does it have the HostingFactory attribute?
Factory="WebApplication1.MyServiceHostFactory"
The name of the factory is Your service name + HostFactory and the whole path is the actual namespace, where your .svc file is located.
Related
I am looking for step by step guide on converting an existing Web Forms asp.net application to use Windows Azure Active Directory authentication (WAAD).
We can assume we dont have to convert/migrate users to the Azure AD.
FYI: I dont have any problem creating a blank WebApplication using VS2013 to connect to WAAD, however I am not clear why changes are needed in existing Webform / MVC hybrid application.
Thanks
I created a blank project using the steps outlined http://www.cloudidentity.com/blog/2014/02/20/ws-federation-in-microsoft-owin-componentsa-quick-start/
move/copied the web.config sections from the blank project
<configuration>
<configSections>
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
<section name="system.identityModel" type="System.IdentityModel.Configuration.SystemIdentityModelSection, System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
<section name="system.identityModel.services" type="System.IdentityModel.Services.Configuration.SystemIdentityModelServicesSection, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
</configSections>
<appSettings>
<add key="ida:FederationMetadataLocation" value="https://login.windows.net/myorganizationdomain.com/FederationMetadata/2007-06/FederationMetadata.xml" />
<add key="ida:Realm" value="https://mywebsite.com/myproject" />
<add key="ida:AudienceUri" value="https://localhost:44318/" />
</appSettings>
<connectionStrings>
<add name="DefaultConnection" connectionString="Data Source=(LocalDb)\v11.0;AttachDbFilename=|DataDirectory|\aspnet-myproject.mdf;Initial Catalog=aspnet-myproject;Integrated Security=True" providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<authentication mode="None" />
<authorization>
<deny users="?" />
</authorization>
<compilation debug="true" targetFramework="4.5.1" />
<httpRuntime targetFramework="4.5.1" requestValidationMode="4.5" />
</system.web>
<system.identityModel>
<identityConfiguration>
<issuerNameRegistry type="myproject.Utils.DatabaseIssuerNameRegistry, myProject" />
<audienceUris>
<add value="https://mywebsite.com/myproject" />
</audienceUris>
<securityTokenHandlers>
<add type="System.IdentityModel.Services.Tokens.MachineKeySessionSecurityTokenHandler, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<remove type="System.IdentityModel.Tokens.SessionSecurityTokenHandler, System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
</securityTokenHandlers>
<certificateValidation certificateValidationMode="None" />
</identityConfiguration>
</system.identityModel>
<system.webServer>
<modules>
<add name="WSFederationAuthenticationModule" type="System.IdentityModel.Services.WSFederationAuthenticationModule, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition="managedHandler" />
<add name="SessionAuthenticationModule" type="System.IdentityModel.Services.SessionAuthenticationModule, System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" preCondition="managedHandler" />
</modules>
</system.webServer>
<system.identityModel.services>
<federationConfiguration>
<cookieHandler requireSsl="true" />
<wsFederation passiveRedirectEnabled="true" issuer="https://login.windows.net/myorganizationdomain.com/wsfed" realm="https://mywebsite.com/myproject" requireHttps="true" reply="https://localhost:44318/" persistentCookiesOnPassiveRedirects="true" />
</federationConfiguration>
</system.identityModel.services>
copy the generated code DatabaseIssuerNameRegistry.cs from Utils
folder, from the "blank" project into the existing project.
copy theTenantRegistrationModels.cs and TenantDbContext.cs from the "blank"
project into existing project
copy the IdentityConfig.cs from the "blank" project into existing project
In the Global.asx.cs add the following
IdentityConfig.ConfigureIdentity();
I uploaded my orchard web-site on a hosting. In "wwwroot" I created a new folder "slider" and uploaded jpg files into it.
When I try to access them with the url "example.com/slider/1.jpg" I keep getting Server Error in '/' Application. The resource cannot be found.
The file is there. I can see it on ftp.
I tried doing the same thing on localhost and it gives me the same error.
I tried opening an image from a "Themes" folder. I've found a file "Theme.png" and I was able to open it in a browser. I added "1.jpg" to the same folder where I've found Theme.png and I wasn't able to open 1.jpg it gave me the same error message.
That's my web.config file:
<?xml version="1.0"?>
<configuration>
<configSections>
<sectionGroup name="system.web.webPages.razor" type="System.Web.WebPages.Razor.Configuration.RazorWebSectionGroup, System.Web.WebPages.Razor, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<remove name="host" />
<remove name="pages" />
<section name="host" type="System.Web.WebPages.Razor.Configuration.HostSection, System.Web.WebPages.Razor, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" />
<section name="pages" type="System.Web.WebPages.Razor.Configuration.RazorPagesSection, System.Web.WebPages.Razor, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" />
</sectionGroup>
</configSections>
<system.web.webPages.razor>
<host factoryType="System.Web.Mvc.MvcWebRazorHostFactory, System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<pages pageBaseType="Orchard.Mvc.ViewEngines.Razor.WebViewPage">
<namespaces>
<add namespace="System.Web.Mvc" />
<add namespace="System.Web.Mvc.Ajax" />
<add namespace="System.Web.Mvc.Html" />
<add namespace="System.Web.Routing" />
<add namespace="System.Web.WebPages" />
<add namespace="System.Linq"/>
<add namespace="System.Collections.Generic"/>
<add namespace="Orchard.Mvc.Html"/>
</namespaces>
</pages>
</system.web.webPages.razor>
<system.web>
<compilation targetFramework="4.0">
<assemblies>
<add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
<add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
<add assembly="System.Data.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<add assembly="System.Web.WebPages, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
</assemblies>
</compilation>
</system.web>
</configuration>
Have you added a web.config file to the slider folder as described in this answer about a 404 with a JavaScript file.
Before posting this, I did read here and SO question -
I took a little different approach, which seems easier.
Since MVC-3 application contained very few controllers and views. I created a new MVC-4 - Basic application and copied following files -
Controllers
Views
Layout files
Routing info from old Global.asax.cs to App_Start/Route.Config
The advantage I see with this approach is
There was no need to refer new Dlls manually.
There was no need to update Web.config references.
Build goes fine, however while running the application I end up with following error.
[A]System.Web.WebPages.Razor.Configuration.HostSection cannot be cast
to [B]System.Web.WebPages.Razor.Configuration.HostSection.
Type A
originates from 'System.Web.WebPages.Razor, Version=1.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35' in the context
'Default' at location
'C:\WINDOWS\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Razor\v4.0_1.0.0.0__31bf3856ad364e35\System.Web.WebPages.Razor.dll'.
Type B originates from 'System.Web.WebPages.Razor, Version=2.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35' in the context
'Default' at location
'C:\WINDOWS\Microsoft.Net\assembly\GAC_MSIL\System.Web.WebPages.Razor\v4.0_2.0.0.0__31bf3856ad364e35\System.Web.WebPages.Razor.dll'.
Obviously somewhere MVC3 dlls are being referred. But not sure where? Any advice on this would be helpful. Thanks !
If I had to guess, I'd say your ~/Views/web.config was overwritten and still is pointing to the older razor parser (and subsequently the older config section). Try replacing that file with the following:
<?xml version="1.0"?>
<configuration>
<configSections>
<sectionGroup name="system.web.webPages.razor" type="System.Web.WebPages.Razor.Configuration.RazorWebSectionGroup, System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<section name="host" type="System.Web.WebPages.Razor.Configuration.HostSection, System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" />
<section name="pages" type="System.Web.WebPages.Razor.Configuration.RazorPagesSection, System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" />
</sectionGroup>
</configSections>
<system.web.webPages.razor>
<host factoryType="System.Web.Mvc.MvcWebRazorHostFactory, System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<pages pageBaseType="System.Web.Mvc.WebViewPage">
<namespaces>
<add namespace="System.Web.Mvc" />
<add namespace="System.Web.Mvc.Ajax" />
<add namespace="System.Web.Mvc.Html" />
<add namespace="System.Web.Optimization" />
<add namespace="System.Web.Routing" />
</namespaces>
</pages>
</system.web.webPages.razor>
<appSettings>
<add key="webpages:Enabled" value="false" />
</appSettings>
<system.web>
<httpHandlers>
<add path="*" verb="*" type="System.Web.HttpNotFoundHandler"/>
</httpHandlers>
<!--
Enabling request validation in view pages would cause validation to occur
after the input has already been processed by the controller. By default
MVC performs request validation before a controller processes the input.
To change this behavior apply the ValidateInputAttribute to a
controller or action.
-->
<pages
validateRequest="false"
pageParserFilterType="System.Web.Mvc.ViewTypeParserFilter, System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
pageBaseType="System.Web.Mvc.ViewPage, System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"
userControlBaseType="System.Web.Mvc.ViewUserControl, System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35">
<controls>
<add assembly="System.Web.Mvc, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" namespace="System.Web.Mvc" tagPrefix="mvc" />
</controls>
</pages>
</system.web>
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
<handlers>
<remove name="BlockViewHandler"/>
<add name="BlockViewHandler" path="*" verb="*" preCondition="integratedMode" type="System.Web.HttpNotFoundHandler" />
</handlers>
</system.webServer>
</configuration>
I'm trying to include a webforms (.aspx) page inside of an Orchard 1.2 application.
I've tried adding back the aspx handler in the web.config
<add path="*.aspx" verb="*" type="System.Web.UI.PageHandlerFactory" />
and added code to the Global.asax to try and get routing to ignore aspx requests
routes.IgnoreRoute("{resource}.aspx/{*pathInfo}");
I'm still receiving a 404 response anytime I request the aspx page. How do I make this work?
Here's a web.config that has worked for me:
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.webServer>
<handlers accessPolicy="Script">
<add name="ASPX" path="*.aspx" verb="*" type="System.Web.UI.PageHandlerFactory" preCondition="integratedMode" requireAccess="Script"/>
</handlers>
</system.webServer>
</configuration>
Using the above as the complete Web.cofig of Orchard.web produces the result but stops Orchard pages being displayed.
Adding this handler to the original Web.config of Orchard.Web still produces a Resource cannot be found error when browsing to ASPX pages (orchard pages are fine).
By removing
<httpHandlers>
<!-- see below -->
<add path="*" verb="*" type="System.Web.HttpNotFoundHandler"/>
</httpHandlers>
I can browse to both Orchard Pages and ASPX pages by using the method above.
Thanks
Complete Web.config from Orchard.Web
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
\Windows\Microsoft.Net\Framework\v2.x\Config
-->
<configuration>
<configSections>
<sectionGroup name="system.web.webPages.razor" type="System.Web.WebPages.Razor.Configuration.RazorWebSectionGroup, System.Web.WebPages.Razor">
<section name="host" type="System.Web.WebPages.Razor.Configuration.HostSection, System.Web.WebPages.Razor" requirePermission="false" />
<section name="pages" type="System.Web.WebPages.Razor.Configuration.RazorPagesSection, System.Web.WebPages.Razor" requirePermission="false" />
</sectionGroup>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" requirePermission="false" />
</configSections>
<appSettings>
<add key="webpages:Enabled" value="false" />
<add key="log4net.Config" value="Config\log4net.config" />
</appSettings>
<system.web.webPages.razor>
<host factoryType="System.Web.Mvc.MvcWebRazorHostFactory, System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<pages pageBaseType="Orchard.Mvc.ViewEngines.Razor.WebViewPage">
<namespaces>
<add namespace="System.Web.Mvc" />
<add namespace="System.Web.Mvc.Ajax" />
<add namespace="System.Web.Mvc.Html" />
<add namespace="System.Web.Routing" />
<add namespace="System.Linq"/>
<add namespace="System.Collections.Generic"/>
<add namespace="Orchard.Mvc.Html"/>
</namespaces>
</pages>
</system.web.webPages.razor>
<!--
Set default transaction timeout to 30 minutes so that interactive debugging
is easier (default timeout is less than one minute)
-->
<system.transactions>
<defaultSettings timeout="00:30:00"/>
</system.transactions>
<system.web>
<!--<trust level="Medium" originUrl="" />-->
<httpRuntime requestValidationMode="2.0" />
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true" targetFramework="4.0" batch="true" numRecompilesBeforeAppRestart="250">
<buildProviders>
<add extension=".csproj" type="Orchard.Environment.Extensions.Compilers.CSharpExtensionBuildProviderShim"/>
</buildProviders>
<assemblies>
<add assembly="System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL"/>
<add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL"/>
<add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL"/>
<add assembly="System.Data.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<remove assembly="System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<remove assembly="System.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<remove assembly="System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<remove assembly="System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<remove assembly="System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<remove assembly="System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<remove assembly="System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<remove assembly="System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<remove assembly="System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<remove assembly="System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<remove assembly="System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
<remove assembly="System.ServiceModel.Web, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
<remove assembly="System.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
<remove assembly="System.ServiceModel.Activities, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
<remove assembly="System.WorkflowServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"/>
<remove assembly="System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
<remove assembly="System.Data.DataSetExtensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<remove assembly="System.Web.ApplicationServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</assemblies>
</compilation>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Forms">
<forms loginUrl="~/Users/Account/AccessDenied" timeout="2880"/>
</authentication>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
-->
<customErrors mode="RemoteOnly" />
<pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID">
<namespaces>
<add namespace="System.Web.Mvc"/>
<add namespace="System.Web.Mvc.Ajax"/>
<add namespace="System.Web.Mvc.Html"/>
<add namespace="System.Web.Routing"/>
<add namespace="System.Linq"/>
<add namespace="System.Collections.Generic"/>
<add namespace="Orchard.Mvc.Html"/>
</namespaces>
</pages>
<httpModules>
<add name="WarmupHttpModule" type="Orchard.WarmupStarter.WarmupHttpModule, Orchard.WarmupStarter, Version=1.0.20, Culture=neutral"/>
</httpModules>
</system.web>
<!--
The system.webServer section is required for running ASP.NET AJAX under Internet
Information Services 7.0. It is not necessary for previous version of IIS.
-->
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
<modules runAllManagedModulesForAllRequests="true">
<remove name="WarmupHttpModule" />
<add name="WarmupHttpModule" type="Orchard.WarmupStarter.WarmupHttpModule, Orchard.WarmupStarter, Version=1.0.20, Culture=neutral"/>
</modules>
<handlers accessPolicy="Script">
<add name="ASPX" path="*.aspx" verb="*" type="System.Web.UI.PageHandlerFactory" preCondition="integratedMode" requireAccess="Script"/>
<add name="NotFound" path="*" verb="*" type="System.Web.HttpNotFoundHandler" preCondition="integratedMode" requireAccess="Script"/>
</handlers>
</system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<probing privatePath="App_Data/Dependencies"/>
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0" newVersion="3.0.0.0"/>
<bindingRedirect oldVersion="2.0.0.0" newVersion="3.0.0.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
I am trying to deploy a asp.net mvc site. My hosting service provider provides me dsn database connection for my sql server 2008 database. I changed my web.config to use dsn connection using this modification in web.config.
<appSettings>
<add key="myDSN" value="evdsn"/>
</appSettings>
In my site I have used asp.net membership provider. I have all the tables of membership provider in my own database. when I deploy the site I get the following error:
\
My web.config file is as follows
<?xml version="1.0" encoding="UTF-8"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
\Windows\Microsoft.Net\Framework\v2.x\Config
-->
<configuration>
<!--<configSections>
<sectionGroup name="elmah">
<section name="security" requirePermission="false" type="Elmah.SecuritySectionHandler, Elmah"/>
<section name="errorLog" requirePermission="false" type="Elmah.ErrorLogSectionHandler, Elmah"/>
<section name="errorMail" requirePermission="false" type="Elmah.ErrorMailSectionHandler, Elmah"/>
<section name="errorFilter" requirePermission="false" type="Elmah.ErrorFilterSectionHandler, Elmah"/>
</sectionGroup>
</configSections>-->
<appSettings>
<add key="myDSN" value="evodsn"/>
</appSettings>
<connectionStrings>
<add name="evocon" connectionString="DSN=myDSN" providerName="System.Data.Odbc" />
</connectionStrings>
<system.net>
<mailSettings>
<smtp>
<network host="smtp.gmail.com" />
</smtp>
</mailSettings>
</system.net>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<httpHandlers>
<!--<add verb="POST,GET,HEAD" path="elmah.axd" type="Elmah.ErrorLogPageFactory, Elmah"/>-->
<add verb="*" path="TinyMCEHandler.aspx" type="Moxiecode.TinyMCE.Web.HttpHandler, Moxiecode.TinyMCE" validate="false" />
<add verb="*" path="*.mvc" validate="false" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add path="WebResource.axd" verb="GET" type="System.Web.Handlers.AssemblyResourceLoader" validate="true" />
</httpHandlers>
<httpRuntime requestValidationMode="2.0" />
<!--<httpModules>
<add name="ErrorLog" type="Elmah.ErrorLogModule, Elmah"/>
</httpModules>-->
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add assembly="System.Data.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" />
<add assembly="System.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" /></assemblies>
</compilation>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<globalization uiCulture="en" culture="en-GB" />
<authentication mode="Forms">
<forms loginUrl="~/Account.mvc/index" timeout="2880" protection="All" />
</authentication>
<membership>
<providers>
<clear />
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="evocon" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/" />
</providers>
</membership>
<profile>
<providers>
<clear />
<add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/" />
</providers>
</profile>
<roleManager enabled="false">
<providers>
<clear />
<add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
<add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
</roleManager>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.-->
<customErrors mode="Off">
<error statusCode="403" redirect="NoAccess.htm"/>
<error statusCode="404" redirect="FileNotFound.htm"/>
</customErrors>
<pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID">
<namespaces>
<add namespace="System.Web.Mvc" />
<add namespace="System.Web.Mvc.Ajax" />
<add namespace="System.Web.Mvc.Html" />
<add namespace="System.Web.Routing" />
<add namespace="System.Linq" />
<add namespace="System.Collections.Generic" />
<add namespace="Telerik.Web.Mvc.UI" />
</namespaces>
</pages>
</system.web>
<!--
The system.webServer section is required for running ASP.NET AJAX under Internet
Information Services 7.0. It is not necessary for previous version of IIS.
-->
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
<modules runAllManagedModulesForAllRequests="true">
</modules>
<handlers>
<remove name="MvcHttpHandler" />
<remove name="UrlRoutingHandler" />
<add name="MvcHttpHandler" preCondition="integratedMode" verb="*" path="*.mvc" type="System.Web.Mvc.MvcHttpHandler, System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</handlers>
<directoryBrowse enabled="false" />
<defaultDocument>
<files>
<clear />
<add value="Default.aspx" />
<add value="Default.asp" />
<add value="Default.php" />
<add value="Default.htm" />
<add value="Default.html" />
<add value="Index.aspx" />
<add value="Index.asp" />
<add value="Index.php" />
<add value="Index.htm" />
<add value="Index.html" />
<add value="parking.htm" />
</files>
</defaultDocument>
</system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" />
<bindingRedirect oldVersion="1.0.0.0" newVersion="2.0.0.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
<!--<elmah>
<errorLog type="Elmah.XmlFileErrorLog, Elmah" logPath="~/App_Data"/>
</elmah>-->
<location path="App_Data" allowOverride="false">
<system.web>
<authorization>
<allow users="?" />
</authorization>
</system.web>
</location>
</configuration>
You're specifying in your <membership><provider> node that you want the connectionStringName to be "myconnectionstring", yet you don't specify that connection string anywhere. You've got an AppSetting key, but that isn't being used either. So, yes, you should use the DSN name provided to you, but you've got to put it in the right place, which is the connectionStrings node in your .config file.
Update
This article about connecting to an ODBC database via the SQLDataSourceControl has some helpful info, namely, that your connectionString section could look like this:
<configuration>
<connectionStrings>
<add
name="ODBCDataConnectionString"
connectionString="Driver=ODBCDriver;server=ODBCServer;"
providerName="System.Data.Odbc"
/>
</connectionStrings>
</configuration>
...so, perhaps instead of using the DSN designation, you could use the "server" attribute of the connectionString and then just use their dsn name there?
What the error message is saying is that in the config file where you specify you'd like to use the AspNetSqlMembershipProvider provider, you are not specifying a valid connection string, which must be defined in a connectionStrings section of your config file.
Try using this connection string:
System DSN
DSN=myDsn;Uid=myUsername;Pwd=;
File DSN
FILEDSN=c:\myDsnFile.dsn;Uid=myUsername;Pwd=;
From: http://www.connectionstrings.com/dsn