I am doing an school assigment where I need to get the last value of "code" so I can then insert next row with this code incremented. I tried to pull it out this way.
DECLARE
v_last_code f_shifts.code%TYPE;
BEGIN
SELECT LAST_VALUE(code) OVER (ORDER BY code)
INTO v_last_code
FROM f_shifts;
DBMS_OUTPUT.PUT_LINE('Last value is: ' || v_last_code);
END;
However I get ORA-01422: exact fetch returns more than one requested number of rows
and I have no idea why and how can a last_value be more than one row
Thanks !
You can use a nested table like this.
DECLARE
v_last_code f_shifts.code%TYPE;
TYPE t_tbl IS TABLE OF f_shifts.code%TYPE;
-- Above line creates the nested table type of the required type.
v_tbl T_TBL;
-- Above line creates the nested table variable.
BEGIN
SELECT code
BULK COLLECT INTO v_tbl -- collects all the values, ordered, into the nested table
FROM f_shifts
ORDER BY code;
v_last_code = v_tbl(v_tbl.LAST); -- gets the last values and puts into the variable
DBMS_OUTPUT.PUT_LINE('Last value is: ' || v_last_code);
END;
/
Related
I would like to know if there's any option to iterate a table while performing SELECT values into a CURSOR.
For example:
I have a table TEMP_NUMBERS which contains only numbers (single column).
I have to perform a SELECT from each number in the table (I do not know the amount of rows in the table in advance).
Here is basically what I'm attempting to do. Obviously this does not work, but can I do some kind of a workaround?
I need to SELECT the data into the p_cv_PermsNotifs which is a RETURN REF CURSOR.
IF NOT p_cv_PermsNotifs%ISOPEN THEN OPEN p_cv_PermsNotifs FOR
FOR i IN 1..TEMP_NUMBERS.NUMBER.COUNT LOOP
SELECT DISTINCT
SEC_USER_ROLE.ENTITY_TYP_CODE,
SEC_USER_ROLE.ENTITY_ID
FROM
SEC_USER_ROLE
WHERE
SEC_USER_ROLE.ENTITY_ID = i
END LOOP;
END IF;
Also tried this:
IF NOT p_cv_PermsNotifs%ISOPEN THEN OPEN p_cv_PermsNotifs FOR
SELECT DISTINCT
SEC_USER_ROLE.ENTITY_TYP_CODE,
SEC_USER_ROLE.ENTITY_ID
FROM
SEC_USER_ROLE
WHERE
SEC_USER_ROLE.ENTITY_ID IN
(SELECT * FROM TABLE (lv_ListOfEntities))
END IF;
Where lv_ListOfEntities is table of NUMBER indexed by BINARY INTEGER.
But I'm getting "ORA-22905: cannot access rows from a non-nested table item"
Thanks in advance.
In> Hey if you pass a single number at a time, everytime the refcursor
will be overwritten by the next value. So at the end you will only get
the value for last number in the refcursor. A better way is to use
some basic PL/SQL Bulk COLLECT logic which will give you the desired
output.
Hope this helps
--Creating sql type
CREATE OR REPLACE TYPE lv_num_tab IS TABLE OF NUMBER;
--plsql block
var p_lst refcursor;
DECLARE
lv_num lv_num_tab;
BEGIN
SELECT COL1 BULK COLLECT INTO lv_num FROM TEMP_NUMBERS;
OPEN p_lst FOR
SELECT DISTINCT SEC_USER_ROLE.ENTITY_TYP_CODE,
SEC_USER_ROLE.ENTITY_ID
FROM SEC_USER_ROLE
WHERE SEC_USER_ROLE.ENTITY_ID IN
(SELECT * FROM TABLE(cast(lv_num as lv_num_tab))
);
END;
I need to delete data from many tables based on one parameter
The problem is that two tables are related to each other so in order to delete data properly i need to store id's somewhere.
-- i would like to store temp data
-- this one is only for convienience to avoid repeating same select many times
create table ztTaryfa as select zt_taryfa from tw_zbiory_taryfy
where 1=2;
-- this one is mandatory but I dont know how to make it work
Create table wnioskiId as select poli_wnio_id_wniosku from polisy
where 1=2;
Begin
-- fill temp tables
insert into ztTaryfa (
select zt_taryfa from tw_zbiory_taryfy
where zt_zbior = :zbiorId);
insert into wnioskiId (
select poli_wnio_id_wniosku from polisy
where poli_taryfa_id in ztTaryfa);
- regular deletion
delete from POLISY_OT where ot_poli_id in (
select poli_id from polisy
where poli_taryfa_id in ztTaryfa);
commit;
delete from DANE_RAPORTOWE where DR_RPU_ID in (
select RPU_ID from ROZLICZ_PLIK_UBEZP where RPU_ROZLICZ_PLIK_ID in (
select RP_ID from ROZLICZ_PLIK
where RP_ZBIOR_ID = :zbiorId ));
commit;
-- and here we go I need to delete data from POLISY first
delete from POLISY where poli_taryfa_id in ztTaryfa;
commit;
-- but by doing it I lose ids which i need here,
-- so I have to store them somehow and use them here.
delete from WNIOSKI where wnio_id in wnioskiId;
commit;
End;
-- and now lets get rid off temp tables
drop table ztTaryfa;
commit;
drop table wnioskiId;
commit;
To sum up i just need to know how to store somewhere between Begin and End a result of a select query which I can later use in delete statement.
Sounds but I tried so many different methods and all seems to not work.
What u see above is just a 1/3 of the script so I rly would like to make it all simple to use with one parameter.
Thanks you in advance.
You can use global types as simple as this:
create or replace type myrec is object (myid number);
create or replace type mytemp_collection is table of myrec;
declare
v_temp_collection mytemp_collection;
begin
v_temp_collection := mytemp_collection();
select myrec (t.field_type_id ) bulk collect into v_temp_collection from fs_field_types t
where mod(t.field_type_id+1,3)=0; -- for example
FOR i IN 1 .. v_temp_collection.count LOOP
DBMS_OUTPUT.put_line(v_temp_collection(i).myid);
End loop;
delete fs_field_types_back t where t.field_type_id in (select myid from table(v_temp_collection));
end;
Change select and where clause according to your business.
I have a Procedure like this,
create or replace
PROCEDURE SP_PROOF
( proof_id IN NUMBER
, Type1 IN VARCHAR2
, StatementType IN NUMBER
, Resultset OUT NUMBER
) AS
BEGIN
IF StatementType = 1 Then
INSERT INTO ID_Proof (proofid,Id_type)
VALUES (proof_id, Type1);
ELSIF StatementType=2 THEN
SELECT proofid,Id_type Into Resultset FROM ID_Proof;
ELSIF StatementType=3 THEN
UPDATE ID_Proof SET Id_type = Type1 WHERE proofid = proof_id;
ELSIF StatementType=4 THEN
DELETE FROM ID_Proof WHERE proofid = proof_id;
end if;
end;
Im getting an error like this,
Error(14,1): PL/SQL: SQL Statement ignored
Error(14,64): PL/SQL: ORA-00947: not enough values
Please help me to correct the error.
Line 14 is:
SELECT proofid,Id_type Into Resultset FROM ID_Proof;
You are selecting two values, proofid and Id_type, into a single scalar variable Resultset. But you also have no filter, so even if you changed that to select a single value then you'd get a too-many-rows error if there was more than one row in the table (and no-data-found if the table is empty).
It isn't clear what you want to happen; perhaps you want select id_type into resultset from id_proof, but from the parameters id_type is a string - so selecting that into a number variable is likely to fail too. Or perhaps you want all IDs for the specified type, in which case the type of result set would need to be a table type or a ref cursor.
Having separate procedures and functions would be probably be clearer, too.
I need to write a procedure with input parameters like groupid and item ids(array)
I need to insert into a table with values(groupid,itemid[0]) all items like (1,11),(1,12),(1,13),etc. I have table with two columns (groupid,itemid). please help me to sort out this problem. I am trying to write merge but getting error
CREATE OR REPLACE PROCEDURE update_product_group_prc
(
in_product_group_key IN INT,
in_product_key_array IN dbms_utility.maxname_array
)
AS
indx pls_integer := in_product_key_array.FIRST;
BEGIN
WHILE(INDX IS NOT NULL)
LOOP
MERGE INTO DIM_PRODUCT_X_GROUP PXG
USING(SELECT IN_PRODUCT_GROUP_KEY ,
IN_PRODUCT_KEY_ARRAY(INDX) IN_PRODUCT_KEY_ARRAY
FROM DUAL) IN_TBL
ON(IN_TBL.IN_PRODUCT_GROUP_KEY=PXG.PRODUCT_GROUP_KEY)
WHEN MATCHED THEN
-- DELETE --need to delete source records which r not here in array.
-- WHERE
WHEN NOT MATCHED THEN
INSERT (PRODUCT_GROUP_KEY,PRODUCT_KEY)
VALUES (IN_TBL.IN_PRODUCT_GROUP_KEY,IN_TBL.IN_PRODUCT_KEY_ARRAY);`
INDX := IN_PRODUCT_KEY_ARRAY.NEXT(INDX);
END LOOP;
END update_product_group_prc;
Error(16,41): PL/SQL: ORA-00936: missing expression
You have a syntax error. Comment the "WHEN MATCHED THEN" fragment.
http://docs.oracle.com/cd/B28359_01/server.111/b28286/statements_9016.htm#SQLRF55028
I have a MySQL table Page with 2 columns: PageID and OrderByMethod.
I also then have a Data table with lots of columns including PageID (the Page the data is on), DataName, and DataDate.
I want OrderByMethod to have one of three entries: Most Recent Data First, Most Recent Data Last, and Alphabetically.
Is there a way for me to tack an "ORDER BY" clause to the end of this query that will vary its ordering method based on the contents of the "OrderByMethod" column? For example, in this query, I would want to have the ORDER BY clause contain whatever ordering rule is stored in Page 1's OrderByMethod column.
GET * FROM `Data` WHERE `Data`.`PageID`=1 ORDER BY xxxxxx;
Maybe a SELECT clause in the ORDER BY clause? I'm not sure how that would work though.
Thanks!
select Data.*
from Data
inner join Page on (Data.PageID=Page.PageID)
where Data.PageID=1
order by
if(Page.OrderByMethod='Most Recent Data First', now()-DataDate,
if(Page.OrderByMethod='Most Recent Data Last', DataDate-now(), DataName)
);
You can probably do this with the IF syntax to generate a column that you can then order by.
SELECT *, IF(Page.OrderBy = 'Alphabetically', Data.DataName, IF(Page.OrderBy = 'Most Recent Data First', NOW() - Data.DataDate, Data.DataDate - NOW())) AS OrderColumn
FROM Data
INNER JOIN Page ON Data.PageID = Page.PageID
WHERE Page.PageID = 1
ORDER BY OrderColumn
The direction of the ordering is determined in the calculation of the data instead of specifying a direction in the ORDER BY
Can you just append the order by clause to the select statement and rebind the table on postback?
If you want to use the content of the column in Page table as an expression in ORDER BY you have to do it using prepared statements. Let say, you store in OrderByMethod something like "field1 DESC, field2 ASC" and you want this string to be used as it is:
SET #order_by =(SELECT OrderByMethod FROM Page WHERE id = [value]);
SET #qr = CONCAT(your original query,' ORDER BY ', #order_by);
PREPARE stmt FROM #qr;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
If you want the result set to be sorted based on the value of OrderByMethod , you can use IF as it was already mentioned by others, or CASE :
...
ORDER BY
CASE OrderByMethod
WHEN 'val1' THEN field_name1
WHEN 'val2' THEN field_name2
....etc
END