I'm trying to write a fake access point script in ruby; the script is below:
require 'packetgen'
def fake_ap
print 'Making a fake ap...'
while true
bssid = 'aa:aa:aa:aa:aa:aa'
iface = 'mon0'
ssid = 'NoWifi'
broadcast = 'ff:ff:ff:ff:ff:ff'
pkt = PacketGen.gen('RadioTap')
pkt.add('Dot11::Management', mac1: broadcast, mac2: bssid, mac3: bssid)
pkt.add('Dot11::Beacon', cap: '0x1114')
pkt.dot11_beacon.add_element(type: 'SSID', value: ssid)
pkt.dot11_beacon.add_element(type: 'Rates', value: "\x82\x84\x8b\x96\x24\x30\x48\x6c")
pkt.dot11_beacon.add_element(type: 'DSset', value: "\x06")
pkt.dot11_beacon.add_element(type: 'TIM', value: "\x00\x01 \0x00\0x00")
pkt.calc
pkt.to_w(iface)
end
end
fake_ap
Hexdump of packet
The program is supposed to send beacon frames; I ran the program (with my wireless card on monitor mode) however it doesn't show up as an access point. It there a problem with my code or something else. The docs for the packetgen library are here. Thanks!
I'd like to listen 2 ports via Elixir. I managed to listen the ports, though. However, I can't get data from second port.
def accept() do
{:ok, socket} = :gen_tcp.listen(7777, [:binary, packet: 0, active: false, reuseaddr: true])
{:ok, httpSocket} =
:gen_tcp.listen(8787, [:binary, packet: 0, active: false, reuseaddr: true])
http_loop_acceptor(httpSocket)
loop_acceptor(socket)
end
defp http_loop_acceptor(socket) do
{:ok, client} = :gen_tcp.accept(socket)
pid = spawn(fn -> http_serve(client) end)
:ok = :gen_tcp.controlling_process(client, pid)
http_loop_acceptor(socket)
end
defp loop_acceptor(socket) do
{:ok, client} = :gen_tcp.accept(socket)
pid = spawn(fn -> serve(client) end)
:ok = :gen_tcp.controlling_process(client, pid)
loop_acceptor(socket)
end
I can send the data to 8787 port (httpSocket). However, I can't send any data to 7777 (socket).
If change the order of these 2 lines then I can send the data to 7777 (socket), I can't send any data to 8787 port.
http_loop_acceptor(httpSocket)
loop_acceptor(socket)
How can I listen multiple ports and receive data via those ports?
In your accept function, the call to http_loop_acceptor will recurse infinitely, which means that loop_acceptor is never called.
If you want to listen on two sockets, you need to start two separate processes, one for each socket. A quick and dirty way is to use spawn, but in a real application you would model these processes as part of your supervision tree.
What I am trying to ultimately achieve is to control my garage door opener with a relay connected to a WeMos D1 Mini, connected to my home WiFi. I am using the openGarageDoor() function. Everything works fine with serial connection.
I have been trying to run HTTP server on a WeMos D1 Mini with this script.
customertagsAction() -- try:
import usocket as socket
except:
import socket
CONTENT = b"""\
HTTP/1.0 200 OK
Hello #%d from MicroPython!
"""
def main(micropython_optimize=False):
s = socket.socket()
# Binding to all interfaces - server will be accessible to other hosts!
ai = socket.getaddrinfo("0.0.0.0", 8080)
print("Bind address info:", ai)
addr = ai[0][-1]
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
s.bind(addr)
s.listen(5)
print("Listening, connect your browser to http://<this_host>:8080/")
counter = 0
while True:
res = s.accept()
client_sock = res[0]
client_addr = res[1]
print("Client address:", client_addr)
print("Client socket:", client_sock)
if not micropython_optimize:
# To read line-oriented protocol (like HTTP) from a socket (and
# avoid short read problem), it must be wrapped in a stream (aka
# file-like) object. That's how you do it in CPython:
client_stream = client_sock.makefile("rwb")
else:
# .. but MicroPython socket objects support stream interface
# directly, so calling .makefile() method is not required. If
# you develop application which will run only on MicroPython,
# especially on a resource-constrained embedded device, you
# may take this shortcut to save resources.
client_stream = client_sock
print("Request:")
req = client_stream.readline()
print(req)
while True:
h = client_stream.readline()
if h == b"" or h == b"\r\n":
break
print(h)
client_stream.write(CONTENT % counter)
client_stream.close()
if not micropython_optimize:
client_sock.close()
counter += 1
print()
main()
The requests are received properly and the GET variables are shown on the print(). The best i have been able to do is
req = client_stream.readline()
print(req)
while True:
h = client_stream.readline()
if h == b"" or h == b"\r\n":
break
print(h)
client_stream.write(CONTENT % counter)
//my function here:
if 'opengaragedoor=1' in req:
openGarageDoor()
client_stream.close()
I don't know how to parse the request properly. I only have come up with this dirty solution. This probably causes a timeout on the requesting system, as Postman or such needs to wait for the function to run through.
I'm trying to do a simple UDP server using OCaml and the Async API but I'm stuck. I can't make this simple example work.
let wait_for_datagram () : unit Deferred.t =
let port = 9999 in
let addr = Socket.Address.Inet.create Unix.Inet_addr.localhost ~port in
let%bind socket = Udp.bind addr in
let socket = Socket.fd socket in
let stop = never () in
let config = Udp.Config.create ~stop () in
let callback buf _ : unit = failwith "got a datagram" in
Udp.recvfrom_loop ~config socket callback
I test it with:
echo -n "hello goodbye" > /dev/udp/localhost/9999
Nothing happens in my program. I tried to investigate with other tools.
I see a destination unreachable packet with Wireshark and lsof shows me this:
> lsof -i :9999
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
main.exe 77564 nemo 5u IPv4 0x25251bcc3485235f 0t0 UDP localhost:distinct
What am I doing wrong here?
The code looks ok to me. I think localhost is resolved to IPv6 address by default, and you just send it there.
Try to force using IPv4 protocol
echo -n "hello goodbye" | nc -4 -u -w0 localhost 9999
or specify explicit IPv4 address
echo -n "hello goodbye" > /dev/udp/127.0.0.1/9999
I need to know what the largest UDP packet I can send to another computer is without fragmentation.
This size is commonly known as the MTU (Maximum Transmission Unit). Supposedly, between 2 computers, will be many routers and modems that may have different MTUs.
I read that the TCP implementation in windows automatically finds the maximum MTU in a path.
I was also experimenting, and I found out that the maximum MTU from my computer to a server was 57712 bytes+header. Anything above that was discarded. My computer is on a LAN, isn't the MTU supposed to be around 1500 bytes?
The following doesn't answer your question directly but you might find it interesting; it says that IP packets can be disassembled/reassembled, and therefore bigger than limit on the underling media (e.g. 1500-byte Ethernet): Resolve IP Fragmentation, MTU, MSS, and PMTUD Issues with GRE and IPSEC
More on this topic:
Re: UDP fragmentation says you should use ICMP instead of UDP to discover MTU
Path MTU Discovery says that a TCP connection might include implicit MTU negotiation via ICMP
I don't know about generating ICMP via an API on Windows: at one time such an API was proposed, and was controversial because people argued that would make it easy to write software that implements denial-of-service functionality by generating a flood of ICMP messages.
No, it looks like it is implemented: see for example Winsock Programmer's FAQ Examples: Ping: Raw Sockets Method.
So, to discover MTU, generate ping packets with the 'do not fragment' flag.
Maybe there's an easier API than this, I don't know; but I hope I've given you to understand the underlying protocol[s].
In addition to all the previous answers, quoting the classic:
IPv4 and IPv6 define minimum reassembly buffer size, the minimum datagram size that we are guaranteed any implementation must support. For IPv4, this is 576 bytes. IPv6 raises this to 1,280 bytes.
This pretty much means that you want to limit your datagram size to under 576 if you work over public internet and you control only one side of the exchange - that's what most of the standard UDP-based protocols do.
Also note that PMTU is a dynamic property of the path. This is one of the things TCP deals with for you. Unless you are ready to re-implement lots of sequencing, timing, and retransmission logic, use TCP for any critical networking. Benchmark, test, profile, i.e. prove that TCP is your bottleneck, only then consider UDP.
This is an interesting topic for me. Perhaps some practical results might be of interest when delivering chunky UDP data around the real world internet via UDP, and with a transmission rate of 1 packet a second, data continues to turn up with minimal packet loss up to about 2K. Over this and you start running into issues, but regularly we delivered 1600+ bytes packets without distress - this is over GPRS mobile networks as well as WAN world wide. At ~1K assuming the signal is stable (its not!) you get low packet loss.
Interestingly its not the odd packet, but often a squall of packets for a few seconds - which presumably is why VoIP calls just collapse occasionally.
Your own MTU is available in the registry, but the MTU in practice is going to the smallest MTU in the path between your machine and the destination. Its both variable and can only be determined empirically. There are a number of RFCs showing how to determine it.
LAN's can internally have very large MTU values, since the network hardware is typically homogeneous or at least centrally administrated.
For UDP applications you must handle end-to-end MTU yourself if you want to avoid IP fragmentation or dropped packets. The recommended approach for any application is to do your best to use PMTU to pick your maximum datagram, or send datagrams < minimum PMTU
https://www.rfc-editor.org/rfc/rfc5405#section-3.2
Unicast UDP Usage Guidelines for Application Designers "SHOULD NOT send datagrams that exceed the PMTU, SHOULD discover PMTU or send datagrams < minimum PMTU
Windows appears to settings and access to PMTU information via it's basic socket options interface:
You can make sure PMTU discover is on via IP_MTU_DISCOVER, and you can read the MTU via IP_MTU.
https://learn.microsoft.com/en-us/windows/desktop/winsock/ipproto-ip-socket-options
Here's a bit of Windows PowerShell that I wrote to check for Path MTU issues. (The general technique is not too hard to implement in other programming languages.) A lot of firewalls and routers are configured to drop all ICMP by people who don't know any better. Path MTU Discovery depends on being able to receive an ICMP Destination Unreachable message with Fragementation Needed set in response to sending a packet with Don't Fragment set. The Resolve IPv4 Fragmentation, MTU, MSS, and PMTUD Issues with GRE and IPsec actually does a really good job of explaining how discovery works.
function Test-IPAddressOrName($ipAddressOrName)
{
$ipaddress = $null
$isValidIPAddressOrName = [ipaddress]::TryParse($ipAddressOrName, [ref] $ipaddress)
if ($isValidIPAddressOrName -eq $false)
{
$hasResolveDnsCommand = $null -ne (Get-Command Resolve-DnsName -ErrorAction SilentlyContinue)
if ($hasResolveDnsCommand -eq $true)
{
$dnsResult = Resolve-DnsName -DnsOnly -Name $ipAddressOrName -ErrorAction SilentlyContinue
$isValidIPAddressOrName = $null -ne $dnsResult
}
}
return $isValidIPAddressOrName
}
function Get-NameAndIPAddress($ipAddressOrName)
{
$hasResolveDnsCommand = $null -ne (Get-Command Resolve-DnsName -ErrorAction SilentlyContinue)
$ipAddress = $null
$validIPAddress = [ipaddress]::TryParse($ipAddressOrName, [ref] $ipAddress)
$nameAndIp = [PSCustomObject] #{ 'Name' = $null; 'IPAddress' = $null }
if ($validIPAddress -eq $false)
{
if ($hasResolveDnsCommand -eq $true)
{
$dnsResult = Resolve-DnsName -DnsOnly $ipAddressOrName -Type A -ErrorAction SilentlyContinue
if ($null -ne $dnsResult -and $dnsResult.QueryType -eq 'A')
{
$nameAndIp.Name = $dnsResult.Name
$nameAndIp.IPAddress = $dnsResult.IPAddress
}
else
{
Write-Error "The name $($ipAddressOrName) could not be resolved."
$nameAndIp = $null
}
}
else
{
Write-Warning "Resolve-DnsName not present. DNS resolution check skipped."
}
}
else
{
$nameAndIp.IPAddress = $ipAddress
if ($hasResolveDnsCommand -eq $true)
{
$dnsResult = Resolve-DnsName -DnsOnly $ipAddress -Type PTR -ErrorAction SilentlyContinue
if ($null -ne $dnsResult -and $dnsResult.QueryType -eq 'PTR')
{
$nameAndIp.Name = $dnsResult.NameHost
}
}
}
return $nameAndIp
}
<#
.Synopsis
Performs a series of pings (ICMP echo requests) with Don't Fragment specified to discover the path MTU (Maximum Transmission Unit).
.Description
Performs a series of pings with Don't Fragment specified to discover the path MTU (Maximum Transmission Unit). An ICMP echo request
is sent with a random payload with a payload length specified by the PayloadBytesMinimun. ICMP echo requests of increasing size are
sent until a ping response status other than Success is received. If the response status is PackeTooBig, the last successful packet
length is returned as a reliable MTU; otherwise, if the respone status is TimedOut, the same size packet is retried up to the number
of retries specified. If all of the retries have been exhausted with a response status of TimedOut, the last successful packet
length is returned as the assumed MTU.
.Parameter UseDefaultGateway
If UseDefaultGateway is specified the default gateway reported by the network interface is used as the destination host.
.Parameter DestinationHost
The IP Address or valid fully qualified DNS name of the destination host.
.Parameter InitialTimeout
The number of milliseconds to wait for an ICMP echo reply. Internally, this is doubled each time a retry occurs.
.Parameter Retries
The number of times to try the ping in the event that no reply is recieved before the timeout.
.Parameter PayloadBytesMinimum
The minimum number of bytes in the payload to use. The minimum MTU for IPv4 is 68 bytes; however, in practice, it's extremely rare
to see an MTU size less than 576 bytes so the default value is 548 bytes (576 bytes total packet size minus an ICMP header of 28
bytes).
.Parameter PayloadBytesMaximum
The maximum number of bytes in the payload to use. An IPv4 MTU for jumbo frames is 9000 bytes. The default value is 8973 bytes (9001
bytes total packet size, which is 1 byte larger than the maximum IPv4 MTU for a jumbo frame, minus an ICMP header of 28 bytes).
.Example
Discover-PathMTU -UseDefaultGateway
.Example
Discover-PathMTU -DestinationHost '192.168.1.1'
.Example
Discover-PathMTU -DestinationHost 'www.google.com'
#>
function Discover-PathMtu
{
[CmdletBinding(SupportsShouldProcess = $false)]
param
(
[Parameter(Mandatory = $true, ParameterSetName = 'DefaultGateway')]
[switch] $UseDefaultGateway,
[Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true, ParameterSetName = 'IPAddressOrName')]
[ValidateScript({ Test-IPAddressOrName $_ })]
[string] $DestinationHost,
[Parameter(ParameterSetName = 'IPAddressOrName')]
[Parameter(ParameterSetName = 'DefaultGateway')]
[int] $InitialTimeout = 3000,
[Parameter(ParameterSetName = 'IPAddressOrName')]
[Parameter(ParameterSetName = 'DefaultGateway')]
[int] $Retries = 3,
[Parameter(ParameterSetName = 'IPAddressOrName')]
[Parameter(ParameterSetName = 'DefaultGateway')]
$PayloadBytesMinimum = 548,
[Parameter(ParameterSetName = 'IPAddressOrName')]
[Parameter(ParameterSetName = 'DefaultGateway')]
$PayloadBytesMaximum = 8973
)
begin
{
$ipConfiguration = Get-NetIPConfiguration -Detailed | ?{ $_.NetProfile.Ipv4Connectivity -eq 'Internet' -and $_.NetAdapter.Status -eq 'Up' } | Sort { $_.IPv4DefaultGateway.InterfaceMetric } | Select -First 1
$gatewayIPAddress = $ipConfiguration.IPv4DefaultGateway.NextHop
$pingOptions = New-Object System.Net.NetworkInformation.PingOptions
$pingOptions.DontFragment = $true
$pinger = New-Object System.Net.NetworkInformation.Ping
$rng = New-Object System.Security.Cryptography.RNGCryptoServiceProvider
}
process
{
$pingIpAddress = $null
if ($UseDefaultGateway -eq $true)
{
$DestinationHost = $gatewayIPAddress
}
$nameAndIP = Get-NameAndIPAddress $DestinationHost
if ($null -ne $nameAndIP)
{
Write-Host "Performing Path MTU discovery for $($nameAndIP.Name) $($nameAndIP.IPAddress)..."
$pingReply = $null
$payloadLength = $PayloadBytesMinimum
$workingPingTimeout = $InitialTimeout
do
{
$payloadLength++
# Use a random payload to prevent compression in the path from potentially causing a false MTU report.
[byte[]] $payloadBuffer = (,0x00 * $payloadLength)
$rng.GetBytes($payloadBuffer)
$pingCount = 1
do
{
$pingReply = $pinger.Send($nameAndIP.IPAddress, $workingPingTimeout, $payloadBuffer, $pingOptions)
if ($pingReply.Status -notin 'Success', 'PacketTooBig', 'TimedOut')
{
Write-Warning "An unexpected ping reply status, $($pingReply.Status), was received in $($pingReply.RoundtripTime) milliseconds on attempt $($pingCount)."
}
elseif ($pingReply.Status -eq 'TimedOut')
{
Write-Warning "The ping request timed out while testing a packet of size $($payloadLength + 28) using a timeout value of $($workingPingTimeout) milliseconds on attempt $($pingCount)."
$workingPingTimeout = $workingPingTimeout * 2
}
else
{
Write-Verbose "Testing packet of size $($payloadLength + 28). The reply was $($pingReply.Status) and was received in $($pingReply.RoundtripTime) milliseconds on attempt $($pingCount)."
$workingPingTimeout = $InitialTimeout
}
Sleep -Milliseconds 10
$pingCount++
} while ($pingReply.Status -eq 'TimedOut' -and $pingCount -le $Retries)
} while ($payloadLength -lt $PayloadBytesMaximum -and $pingReply -ne $null -and $pingReply.Status -eq 'Success')
if ($pingReply.Status -eq 'PacketTooBig')
{
Write-Host "Reported IPv4 MTU is $($ipConfiguration.NetIPv4Interface.NlMtu). The discovered IPv4 MTU is $($payloadLength + 27)."
}
elseif ($pingReply.Status -eq 'TimedOut')
{
Write-Host "Reported IPv4 MTU is $($ipConfiguration.NetIPv4Interface.NlMtu). The discovered IPv4 MTU is $($payloadLength + 27), but may not be reliable because the packet appears to have been discarded."
}
else
{
Write-Host "Reported IPv4 MTU is $($ipConfiguration.NetIPv4Interface.NlMtu). The discovered IPv4 MTU is $($payloadLength + 27), but may not be reliable, due to an unexpected ping reply status."
}
return $payloadLength + 27
}
else
{
Write-Error "The name $($DestinationHost) could not be resolved. No Path MTU discovery will be performed."
}
}
end
{
if ($null -ne $pinger)
{
$pinger.Dispose()
}
if ($null -ne $rng)
{
$rng.Dispose()
}
}
}