In my controller, based on user post, i want to make a call to an external provider site to get process some data and get results.
example: say i want to invoke google map api at the following url
http://maps.googleapis.com/maps/api/directions/output?
This call returns an xml object with data, which I would like to use.
Only using google as an example here, but concept is the same.
How would I make the call in spring mvc controller or in the business[service] layer?
I came across jersey client which allows me to go against RESTful service.
This is the link I used:
Jersey Sample Client
Jersey Sample Client from oracle
I think you can open a http request inside a controller /Service ( Service sounds better )
I remember doing in other web framewoks with Apache http client (http://hc.apache.org/ ) but I would try google-api-client or google-api-client-servlet .
I m trying right now .
Related
I have a Spring Boot application, that is using Spring Security with OAuth 2.0. Currently, it is operating against an Authentication Server based on Spring Example code. However, running our own Auth Server has always been a short-term target to facilitate development, not a long-term goal. We have been using the authorization_code grant type and would like to continue using that, irrespective of the Auth Server implementation.
I am attempting to make changes to use OAuth 2.0 Endpoints in Azure Active Directory, to behave as our Authentication Server. So far, I have a successful call to the /authorize endpoint. But the call to get the /token fails with an invalid request error. I can see the requests going out.
It appears that parameters that Azure states as mandatory are not being populated in the POST request. Looking at the Azure doco, it expects the client_id to be defined in the body of the message posted to the endpoint, and that is not added, by default, by Spring.
Can anyone point me in the right direction for how I can add fields to the Form Map that is used when constructing the Access Token request? I can see where the AccessTokenRequest object is being setup in OAuth2ClientConfiguration....
#Bean
#Scope(value = "request", proxyMode = ScopedProxyMode.INTERFACES)
protected AccessTokenRequest accessTokenRequest(#Value("#{request.parameterMap}")
Map<String, String[]> parameters, #Value("#{request.getAttribute('currentUri')}")
String currentUri) {
DefaultAccessTokenRequest request = new DefaultAccessTokenRequest(parameters);
request.setCurrentUri(currentUri);
return request;
}
Should I be trying to define the map in a request.parameterMap spring property? If so, I'm not too sure how that works.
Or should I be using one of the interfaces defined in the AuthorizationServerConfigurerAdapter class?
I have the information to include when sending the AccessTokenRequest, I just don't know the best way to configure Spring to include it? Thanks for any help.
Actually, I found this out. I needed to change the client authentication scheme. Simply adding the following to my application properties added the client_id to the form....
security.oauth2.client.clientAuthenticationScheme=form
If you're using yaml, then yaml-ize it. Thank you Spring!
I want to convert our existing WCF REST web services to ASP.NET Web APIso I started to look into it.
Getting one of my function (i.e. login) up and running in ASP.NET Web API was quite straight forward but there is one thing I'm confused about and I hope one of you can clarify this for me.
In our WCF REST web service, our login (POST) function was called as follows:
http://localhost/mywebsite/mywebservice.svc/Authentication/Login
We'd pass a LoginRequest to it and we'd get a LoginResponse back.
Now in ASP.NET Web API, I've our Login (POST) function is being called as follows:
http://localhost/api/authentication and I'm passing the same LoginRequest and I get the same LoginResponse.
My confusion is, how does ASP.NET Web API know to use the Login function which is defined in the AuthenticationController?
I assume it has something to do with the parameter type being passed but what if I have another function that has the same parameter type, how would it differentiate between the 2?
For example, what if I had a LocalLogin and CloudLogin (not the case btw) and both require the LoginRequest as an input parameter and both return the LoginResponse, how would it know which one to call since it's not part of the URI?
Thanks.
I am using ASP.NET MVC 4 WEB API to create a Restful API service. This is my first go at it, so if you feel I am taking a wrong approach please feel free to correct.
I want to create a rest API (only & not a website, the consumer of the api can decide where they want to consume it), in the past I have used Restful WCF service to achieve this.
I have created a new ASP.NET MVC 4 Web Application and chose the WebAPI project template. I have added a controller class 'CatalogueController.cs' the purpose is on Get() operation I want to return the Catalogue list. The CatalogueDo contains only one property 'Service' of type string.
[System.Web.Http.HttpGet()]
public HttpResponseMessage Get()
{
return Request.CreateResponse(HttpStatusCode.OK, Catalogue);
}
When I run the application the browser loads with the URL http://localhost:5502/ resource not found, if I add the controller name http://localhost:5502/Catalogue/ the browser pops open a notepad with,
[{"Service":"Exchange"},{"Service":"Holidays"}]
The data is correct but
the browser keeps showing resource not found and after my request has been served the URL changes to http://localhost:5502/.
Question,
Am I doing something wrong? Should the response that pops up in the
notepad not be shown as xml in the browser it self?
Why does the controller name get removed from the URL once the request has been served?
Is it at all possible to invoke this REST service from Excel or Power Pivot?
I'm trying to use Thinktecture.IdentityModel.45 for authentication in ASP.NET Web API.
I'm trying to get the Basic Authentication to work. And have downloaded the source and got the sample to work. (JsBasicAuth).
We have Web API in the same project as a MVC application. And when the test client calls ~/api/identity all handlers and authorization work. But then the framework (web api) tries to invoke a controller called "identity" and the call fails.
{"Message":"No HTTP resource was found that matches the request URI 'http://localhost/app/api/identity'.","MessageDetail":"No type was found that matches the controller named 'identity'."}
Do I need to exclude /identity /token from the routing? What am I missing?
I now discovered the Common project in the sample solution. There is a IdentityController there. And I didn't have that in my own project. Now it works! :)
I am trying to extract an id number from a URL using a web service so that it can be used as a parameter for a where clause in a select statement that produces data from a database based on the id number of a record. That data will then be passed back to the page to populate an element in a jQuery modal popup widow.
Everything works fine with a static id number (ex: string postid = "120"), but I don't know how to get the id number from the URL. I'm using Routing in .Net 4 and the method for accessing Routing in pages does not work in a web service. In pages I just do stuff like var id = RouteData.Values["id"]; and that gets the id, but when i did it in a web service I got an error:
CS0120: An object reference is required for the non-static field,
method, or property 'System.Web.Routing.RouteData.Values.get'
Summary:
I have web service accessed form a details page where I want to get RouteData for the page making the request. I want to do this just as easily as I can on a page using RouteData.Values which is just as easy as the now the obsolete Request.Querystring.
Now I am more confused because although I could easily add a new route for the web service I don't know I would call that using jQuery Ajax because of the webservice.asmx/webmethod syntax.
Right now I have URL: "../webservices/googlemaps.asmx/GetGoogleMap" in my jQuery Ajax, but that is not a real URL. It only exists in jQuery somewhere and the way to call the service using just JavaScript is no a real URL either, its webservice.webmethod() which in this case would be googlemaps.GetGoogleMap().
I will try registering a route for webservices/googlemaps.asmx/GetGoogleMap/postid, but I doubt it will work because GetGoogleMap is not a directory or a querystring.
Get current http request and use RequestContext property to get request context - it has current routing data. For example,
var id = HttpContext.Current.Request.RequestContext.RouteData.Values["id"];
In case of WCF based web service, make sure that service is participating in ASP.NET pipeline (see ASP.NET Compatibility)
EDIT: Sorry for misleading answer - the above will not work unless web service url is registered in routing engine. However, it may not solve your issue of retrieving the id - what kind of service implementation are you using? Are you making a GET request or POST request? Typically, web service handler (asmx) or WCF pipeline should convert GET/POST parameters to method parameters. Post your web service code and how you invoke it.