I downloaded syslog-ng OSE from the site (version 3.4.0alpha3)
successfully run
./configure
make
make install
but I've got no /etc/syslog-ng.conf
nor /etc/init.d/syslog-ng
What might be the reason?
env is centos 6.3
This installs syslog-ng under /usr/local with your config as /usr/local/etc/syslog-ng.conf Please check./configure --help for options.
As far as I recall, there are init script examples in the source tree, but not automatically installed.
Related
I updated nginx from version 1.14 to 1.18 (Ubuntu) on Ubuntu 18.04.
Doing so appeared to break passenger. So I uninstalled and attempted to reinstall the Open Source Passenger version via the Passenger installation Ubuntu 18.04 instructions.
I got to this line:
sudo apt-get install -y libnginx-mod-http-passenger
Which throws this error
libnginx-mod-http-passenger : Depends: nginx-common (< 1.14.1) but 1.18.0-3ubuntu1+bionic1 is to be installed
Update I also attempted with the enterprise version. Following the enterprise version installation instructions, I received a similar error message:
libnginx-mod-http-passenger-enterprise : Depends: nginx-common (< 1.14.1) but 1.18.0-3ubuntu1+bionic1 is to be installed
I did attempt to research the issue and I found this issue on Phusion's GitHub as well as this more recent issue. It appears that what most people are doing is rolling back their nginx version to 1.14.
It is not deprecated, no. The problem is that the packaged module you are trying to install was made for an older Nginx version that is distributed through the system default repository. This appears in the installation guide that you've mentioned:
At this point we assume that you already have Nginx installed from your system repository.
What this means is that the following instructions assume that you have Nginx specific version (1.14.0 in your case) installed, for which the packaged module was built. This is emphasised in the new passenger documentation:
If you want to use our packaged Nginx module, you must use your distro's provided Nginx package. If for example you have the repo provided by NGINX setup, you will instead need to compile a dynamic module compatible with that Nginx.
The link in the last quote will bring you to the guide on how to compile a dynamic passenger module and enable it in Nginx configuration. I will not repeat the whole process to keep the answer short but the general approach is this:
Get passenger module for Nginx source code.
Get Nginx source code for the version you have installed.
Compile Nginx with the passenger module:
cd /path-to-nginx-source-dir
./configure --prefix=/opt/nginx \
--with-some-configure-flag \
--add-dynamic-module=$(passenger-config --nginx-addon-dir) \
--add-module=/path-to-some-other-nginx-module
make
sudo make install
Make Nginx to load the module by adding this line to nginx.conf:
load_module modules/ngx_http_passenger_module.so;
Personally, I'd rather chosen the 'nginx-behind-nginx' approach than building the module. That is you have Nginx any version you like but it runs as a reverse proxy for another Nginx with passenger enabled (Passenger Standalone). With an unnoticeable penalty to performance this will be much easier to maintain (install, update). See this guide for details.
I'm a newbie to Ubuntu. Now I'm trying to install Apache Ambari Server on Ubuntu 18.04.
I've successfully completed steps like installing jdk, turning off firewall, stopping SELinux. However I came up against an error when running the command to pull Apache repo. The command is:
$ wget -O /etc/apt/sources.list.d/ambari.list http://public-repo-1.hortonworks.com/ambari/ubuntu18/2.x/updates/2.7.5.0/ambari.list
The error was some HTTP response failure with code 403: Forbidden. I also try another version for ambari (like 2.6.2.0) and even different link for the repo but still the error happened.
So anyone could tell me what is the problem and how to fix it? Thanks so much for helping me out!
I am trying to install ambari on CentOs. I found out that one of the providers cloudera has stopped freely offering the ambari installation starting from this year. You can take a look here. P.S. hortonworks should be under cloudera so that might be the reason why you cannot download the public image.
One of the solutions would be to follow the guide from Apache Ambari official website, which is over here. You can follow the installation guide there for your desired Ambari version on Ubuntu.
For example, if you are going to install Apache Ambari with version 2.7.5, you will find this page useful.
Below is based on my understanding and the instructions described on the documentation but I have not try it yet since my working environment is on CentOS.
Take installation on Ubuntu for instance
Step 1: Install the prerequisites
According to this answer, at least you might need to install python, node and npm on your machine.
Step 2: Build the project using maven
# download ambari
wget https://www-eu.apache.org/dist/ambari/ambari-2.7.5/apache-ambari-2.7.5-src.tar.gz (use the suggested mirror from above)
tar xfvz apache-ambari-2.7.5-src.tar.gz
cd apache-ambari-2.7.5-src
mvn versions:set -DnewVersion=2.7.5.0.0
pushd ambari-metrics
mvn versions:set -DnewVersion=2.7.5.0.0
popd
# build ambari
mvn -B clean install jdeb:jdeb -DnewVersion=2.7.5.0.0 -DbuildNumber=5895e4ed6b30a2da8a90fee2403b6cab91d19972 -DskipTests -Dpython.ver="python >= 2.6"
Step 3: Install Ambari Server
apt-get install ./ambari-server*.deb
Step 4: Setup and Start Ambari Server
# setup your server
ambari-server setup
# start your server
ambari-server start
Step 5: Install and Start Ambari Agent on All Hosts
Note: This step needs to be run on all hosts that will be managed by Ambari.
apt-get install ./ambari-agent*.deb
Edit /etc/ambari-agent/ambari.ini
...
[server]
hostname=localhost
...
Make sure hostname under the [server] section points to the actual Ambari Server host, rather than "localhost".
# start ambari agent
ambari-agent start
After looking around for a while, I couldn't find an answer to my problem. In my Centos 7 machine I have an upgraded version of SQlite:
usr/bin/sqlite3
Now my Python still has the default installed version.
import sqlite3
sqlite3.sqlite_version
'3.7.17'
How can I upgrade it or change the path to the Centos binaries?
Thanks a lot!
Solved:
Instead of the binaries I took the full installation
Download latest sqlite3 from official site. (https://www.sqlite.org/download.html)
Unapack.
tar xvfz sqlite....tar.gz
Go to the unpacked dir. cd sqlite-....
./configure
make
make install
Now you successfully install updated sqlite3. Now fire this command sudo LD_RUN_PATH=/usr/local/lib ./configure --enable-optimizations
Open your activate file of virtual environment (e.g., venv/bin/activate) and add this line top of the file... export LD_LIBRARY_PATH="/usr/local/lib"
I am trying to run a Qt app in docker. I have a very limited Linux experience. The OS is centos. Qt version is 5.9.1. The overall idea is to run it in Xvbf. (I have already run firefox in DISPLAY:1(Xvbf) inside docker under centos)
When I try "docker run -it myTestGuiApp", I get an error libGL.so.1: cannot open shared object file: No such file or directory.
What is missing here?
Thanks in advance.
You probably have a missing library. You might need to install this : yum install mesa-libGL
Just add this line in your dockerfile : RUN yum install mesa-libGL
If this doesn't work, copy here your dockerfile.
I am running CentOS 6 and am trying to install the SPL_Types extension for PHP7. I have php7 up and running however, any time I do pecl install SPL_Types,
I get massive compiler errors and can't find a way around. Ubuntu users can fix the issue by installing libpcre3-dev, but this is not a valid package on CentOS 6. I have verified that pcre and pcre-devel are installed and the latest version. Does anyone have a solution to this?
EDIT 1: A full log when I run the sudo pecl install SPL_Types command: http://pastebin.com/QG3mFjaf
I got it figured out. For those who wish to know, I had to use a third party source to compile and install the extension, then I had to edit my php.ini file manually to add the new module.
https://github.com/esminis/php_pecl_spl_types
then once you have it, run the commands:
phpize --clean
phpize
chmod +x configure
./configure --prefix=/usr
make install
Then, edit your php.ini file and under the dynamic modules section, add
extension=spl_types.so
Restart the httpd service by doing
sudo service httpd restart
Then verify the new module is loaded with phpinfo().