Normally in my machine I can search R's history backwards by typing the desired first characters of the command I want to backward-search and then use the PageUp or PageDown keys to go through all the entries in the R history.
I am working as a guest in a remote cluster now and this option is not available in this machine.
Does anyone have an idea of where can I add this function to R?
EDIT: I am interested on key bindings rather than how to reproduce this function.
EDIT2: I am locally on a Fedora 16 machine; remotely CentOS release 5.3 (Final)
history(pattern="lm\\(") # finds lines with lm or glm calls
There are a variety of history mechanisms and it may be that what your console is looking at will not be the same as that which the history call will be accessing. Read the Details section of the ?history page.
I found where to look at in order to tell R how to behave.
The key was to modify my ~/.inputrc file as it is the reference for R's input method.
I used the same file from my local Fedora 16 /etc/inputrc and copied it into the remote cluster as ~/.inputrc. The file looks like this
# do not bell on tab-completion
#set bell-style none
set meta-flag on
set input-meta on
set convert-meta off
set output-meta on
# Completed names which are symbolic links to
# directories have a slash appended.
set mark-symlinked-directories on
$if mode=emacs
# for linux console and RH/Debian xterm
"\e[1~": beginning-of-line
"\e[4~": end-of-line
# commented out keymappings for pgup/pgdown to reach begin/end of history
#"\e[5~": beginning-of-history
#"\e[6~": end-of-history
"\e[5~": history-search-backward
"\e[6~": history-search-forward
"\e[3~": delete-char
"\e[2~": quoted-insert
"\e[5C": forward-word
"\e[5D": backward-word
"\e[1;5C": forward-word
"\e[1;5D": backward-word
# for rxvt
"\e[8~": end-of-line
"\eOc": forward-word
"\eOd": backward-word
# for non RH/Debian xterm, can't hurt for RH/DEbian xterm
"\eOH": beginning-of-line
"\eOF": end-of-line
# for freebsd console
"\e[H": beginning-of-line
"\e[F": end-of-line
$endif
Related
I have a daily use case where I need to work with projects on different version of Java (8, 11, ...).
I would like to have it displayed in the right side prompt in my shell (ZSH with Oh-My-Zsh). I know of a dummy way (computationally expensive) to do it (just java --version to var and display it). I would like it to have it cached until I don't source a file (which is a specific project file that sets the new env vars for different java versions).
Do you have any ideas how to do this efficiently?
Br,
Stjepan
The PROMPT and RPROMPT variables can have both static and dynamic parts, so you can set the version there when you source the project file, and it will only be calculated one time. The trick is to get the quoting right.
This line goes in the project file that sets the env variables, somewhere after setting PATH to include the preferred java executable:
RPROMPT="${${=$(java --version)}[1,3]}"
The pieces:
RPROMPT= - variable for the right-side prompt.
"..." - the critical part. Variables in double quotes will be expanded then and there, so the commands within this will only be executed when the project file is sourced.
${...[1,3]} - selects the first three words of the enclosed expression. On my system, java --version returns three lines of data, which is way too big for a prompt; this reduces it to something manageable.
${=...} - splits the enclosed value into words.
$(java --version) - jre version info.
Hello this my first question to StackOverflow, not sure about the forum and topic.
While participating in an Open Mainframe initiative using Visual Studio Code and Putty for Unix I developed a sample program in COBOL showing international sayings (german, english, french, spanish, latin for now). It works fine via batch with JCL to file and being called from REXX. In file I can't see special chars for non-english but I had a lucky punch with a twin-program in PL/1 (doing the same and showing the special chars in REXX).
Now my question: I also tried to call by mvscmd from Unix bash script. It works so far but dont show me the special chars. Ok I have last chance to call mvscmd from Python. Or alternatively I can transfer file from MVS to unix (for any reason then it automatically converts and I see my special chars contents).
Where is the place to handle it? Cobol? (as I said, for any reason PL/1 can do. I only use standard put edit in PL/1 vs display in Cobol). Converting the Sysprint/Sysout?
Any specialist can help me?
Hello and sorry for late replay. Well the whole code is a little bit much but I guess my problem is the following - MVSCMD direct coded in the shell script
#!/bin/sh
parm='Z08800.FYD.DATA'
#echo "arg1=>"$1"<"
[ ! -z "$1" ] && parm=$parm","$1
#echo "arg2=>"$2"<"
[ ! -z "$2" ] && parm=$parm","$2
#echo "parm=>"$parm"<"
mvscmd --pgm=saycob --args=$parm \
--steplib='z08800.fyd.load' \
--sysin=dummy \
--sysout=*
I have some more shell script but this is the main. I directly put it to sysout (its the COBOL diplay. I can use fixed string or my saying read from MVS file). When using PL/1 program the last file is then sysprint because PL/1 makes it by PUT EDIT.
I assume my codepage is pretty wrong. But I dont know how to repair. I used some settings in the shell but LANG remains on C ??? By the way this Unix seems to be quite old and I only have the chance to use it until August.
My main interest is to use the program on Mainframe and in JCL and/or REXX.
But they gave us chance with this embedded Unix (?) also so I wanted to try.
Direct Sysout from COBOL program to Unix terminal.
I meant when executing the program on the Mainframe and then watching the result file in ISPF (old stuff) editor by PF3 I can see German and Spanish and French special characters. So they are there seems, produced by COBOL and PL/1.
When transfering the MVS file (kind of PDS) into the UNIX by MVSCMD, it is also fine (special chars) but thats not what I wanted.
I tried to use Python instead flat shell but its going even worse. I cannot direct the Sysout to terminal, all what is Python able to call is on the Mainframe and with the MVS filesystem. So I have to transfer it after. It is to much overhead in my eyes when call say 7 sayings and I want them to be displayed in the Unix terminal lol.
Here is my REXX that is doing the trick
/* rexx */
ARG PARM1 PARM2
PARAMETER = '/Z08800.FYD.DATA'
If Length(PARM1) > 0
Then PARAMETER = PARAMETER","PARM1
If Length(PARM2) > 0
Then PARAMETER = PARAMETER","PARM2
PARAMETER = "'"PARAMETER"'"
Address TSO "Alloc File(sysprint) Dataset(*)"
Address TSO "Alloc File(sysin) Dummy"
Address TSO "Call fyd.load(saypli)" PARAMETER
Address TSO "Free File(sysprint)"
Address TSO "Free File(sysin)"
It is now the other Load, the PL/1 - but the COBOL does the same with Sysout instead of Sysprint.
It is shown in my REXX terminal that is also called by ISPF and then 3.4 in the edit panel. The program has no manual input but reads file. And yes, the sayings are not allocated here, I read them by dynamic allocation but it doesnt matter from where my strings come to the DISPLAY / PUT EDIT
And this now JCL. OK works little different, it stores to PDS member
//SAYCOB JOB
//COBCLG EXEC IGYWCLG,
// PARM.GO='Z08800.FYD.DATA'
// SET MBR=SAYCOB
//COBOL.SYSIN DD DSN=&SYSUID..FYD.SOURCE(&MBR),DISP=SHR
//LKED.SYSLMOD DD DSN=&SYSUID..FYD.LOAD(&MBR),DISP=SHR
//GO.SYSOUT DD SYSOUT=*
//*-------------------------------------------------------------
//*
//*-------------------------------------------------------------
//SAYCOB EXEC PGM=&MBR,PARM='Z08800.FYD.DATA,001,007'
//STEPLIB DD DSN=&SYSUID..FYD.LOAD,DISP=SHR
//SYSOUT DD DSN=&SYSUID..FYD.OUTPUT(&MBR),DISP=SHR
//*-------------------------------------------------------------
//LIST EXEC PGM=LINE80,PARM='/80'
//STEPLIB DD DSN=&SYSUID..FYD.LOAD,DISP=SHR
//SYSIN DD DSN=&SYSUID..FYD.OUTPUT(&MBR),DISP=SHR
//SYSPRINT DD SYSOUT=*
//
Here in the parameter I give them the library to my sayings and then I allocate by PL/1 or COBOL. I can of course show, but its a little bit much, about 200 lines... The problem is not MVS I guess but the Unix codepage.
Anyone got an idea why
system2("bash", "ls")
would result in (both in R-Gui and RStudio Console)
/usr/bin/ls: /usr/bin/ls: cannot execute binary file
while other shells work w/o issues (see example below) and the "bash" in the RStudio Terminal also works w/o problems. AND if there is a remedy for that?
Working system2 example:
system2("powershell", "dir")
Running R-3.6.3 on Windows 10 here ... with "Git bash" executing as "bash".
PS: just in case someone wonders - I also tried the full path ie /usr/bin/ls -> same result
Ok - this does the trick
system2("bash", input = "ls")
so instead of args = ... as with the powershell command one needs (or more interestingly sometimes 'can') use the input = ... parameter with bash
OR as mentioned in the comments by #oguzismail this will also work
system2("bash", "-c ls")
as well as pointed out by #Christoph
system2("ls")
also works sometimes (ie in some RStudio[?] setups it will not return results in some it will).
But I have come to notice that different combinations of R-versions with different RStudio versions [or more probably Locales] will not always behave consistently of course also depending on the availability of bash commands like ls (more generally /usr/bin) being on the PATH or not.
So choose what suits u best!
I have added
export HISTIGNORE="ls:cd:pwd:exit:cd .."
to my .zshrc file.
Deleted .zsh_history and restarted terminal but it still wont ignore those commands.
The zsh shell doesn't use the HISTIGNORE environment variable. Instead, it has a HISTORY_IGNORE environment variable.
From the zshparam manual:
HISTORY_IGNORE
If set, is treated as a pattern at the time history files are
written. Any potential history entry that matches the pattern is skipped. For example, if the value is fc * then
commands that invoke the interactive history editor are never
written to the history file.
Note that HISTORY_IGNORE defines a single pattern: to specify
alternatives use the (first|second|...) syntax.
So in your case, you would want to do
HISTORY_IGNORE="(ls|cd|pwd|exit|cd ..)"
or something similar.
Notice that this affects only history written to the history file, not the history in the currently active shell session, as far as I can see.
i'm using zsh on my mac (oh-my-zsh) and i don't understand why at the end of my output there is always this character: "%"
If i don't put export TERM="xterm-256color" in my ~/.zshrc i haven't that character:
Usually a bold % (or # for root) with reversed colors is used to signify a "partial" line in the output. That is a line, which is not terminated with a newline character.
As it seems to depend on the value of TERM I suspect an incompatibility between that value and the settings of terminal emulator. Contrary to the warning shown in your second screenshot, you actually should not set TERM in your ~/.zshrc (or anywhere inside the shell session). TERM should always be set by the terminal emulator itself. Its value (in conjunction with the terminfo terminal capability data base) tells the shell and other programs, which features a terminal emulator supports and how to use them. If the value is changed in the shell, the terminal emulator will not know about it. This may lead to programs sending control codes the terminal emulator does not understand correctly or at all.
In order to change the value of TERM you should change it in the terminal emulator settings. According to the iTerm 2 FAQ the settings is to be found at Preferences->Profiles->Terminal->Report Terminal Type.
I personally placed export PROMPT_EOL_MARK='' inside my ~/.zprofile and hide the character.