I have a QListWidget and I have set it to accept drops, the mode to be DragDrop etc and I can move QListWidgetItems all around the place (inside the QListWidget of course).
I like this behavior and I want it to let it as is, but I also want my QListWidget to accept drops from a QTreeWidget as well. If I attempt to reimplement the dropEvent() of my QListWidget then I lose the default behavior.
Is there any way to just extend the current behavior so as to have both drag-drop between listwidget items and drag-drop from the treewidget to the listwidget or I have to completely re-write both behaviors in my dropEvent() reimplementation?
Thanks a lot for any answers :)
Two ways:
implement a standalone event filter and make it act upon QEvent::Drop. Install it on your original QListWidget. Return false so that the original dropEvent() handler is called afterwards.
inherit from QListWidget, reimplement dropEvent(evt) and as a last statement, call QListWidget::dropEvent(evt);. Your original behavior will be retained.
No.
Subclass QListWidget, reimplement
virtual void QListWidget::dropEvent ( QDropEvent * event )
and explicitly call
QListWidget::dropEvent(event);
whenever you need the default behavior.
How to call a parent class function from derived class function?
Related
Is it somehow possible to add to each Item in a QListview a Button which is deleting the Object onClick? As shown in the following Picture:
EDIT: As I'm new in QT it would be nice to have some example, to understand it better. And as it seems there are three different Ways? What will be the best? Do use a QAbstractItemView?
Yes. You'll need to use:
QAbstractItemView::setIndexWidget ( const QModelIndex & index, QWidget * widget )
QListView inherits QAbstractItemView and when you're trying to customize list/tree views that's usually the place to look. Be careful though, without a delegate this doesn't scale very well. Check out this thread: http://www.qtcentre.org/threads/26916-inserting-custom-Widget-to-listview
You can also go for a generic approach that can work on variety of containers, including the underlying model of your list view.
Each item in the list has a requestRemoval(Item*) signal and a removeMe() slot, connect the X button to the removeMe() slot in each item constructor, in removeMe() you emit the requestRemoval(this) signal, which is connected to a removeHandler(Item*) slot in your "parent" object upon creation of that item, which receives the pointer of the item which has requests deletion, and removes it from the underlying container being used.
Basically, pressing the remove button causes that particular item to send a pointer of itself to the parent's remove handler which removes that entry.
EDIT: Note that this is a generic approach, as noted in the comments below it can be applied without signals and slots as well, and even though it will work it is not the most efficient solution in your particular case.
I would like add QPushButtons to my QTableView. How can this be done with Qt? Is it possible to specify which column holds the button If I use QItemDelegate?
You've got to create your own PushButtonDelegate by subclassing QItemDelegate.
QAbstractItemView::setItemDelegateForColumn(int column, QAbstractItemDelegate * delegate) will set your delegate for the specified column of a view.
The implementation of the delegate depends on it's desired behavior. E.g. you can implement only createEditor(), setEditorData() and setModelData() to get the button to appear when the user starts editing a cell, or you can change the cell look completely by reimplementing the delegate's paint() method.
For more information see this. Also take a look at the Qt delegate examples.
In my project I am using a custom circle-shaped button widget derived from the QWidget class. I have added several of these widgets to a parent widget.
When one of these custom buttons is clicked, how do I find out which one was clicked?
Adding custom button to parent widget:
void ShotViewCTRL::addShot(QString shotNanme)
{
ShotButton *btnShot=new ShotButton(this);
btnShot->shotName=shotNanme;
connect(btnShot,SIGNAL(Shot_Selected()),this,SLOT(SHOT_CLICKED()));
btnShot->CreateButton();
btnShot->show();
}
My parent widget is ShotViewCTRL (inherits from QWidget), the child widget is ShotButton (custom control, inherits from QWidget).
The control is working fine. It's sending sending to parent object. In my problem, I added the same custom control 10 times.
I need to find which control was clicked? Please help me find the solution.
I have referred to the Qt documentation to find the child widget, but I did't understand. Some sample code would be great.
QSignalMapper is what you are looking for. With QSignalMapper, you can add something like an Id (or even a pointer to the QButton itself) as additional data to the signal emittance and you have to adjust your slot so it takes additional data (ID or Pointer).
Then either distinguish in the slot itself by the id you give your objects some virtual function type() so you can distinguish with that or even try casting and catch errors (Tip: don't try the last method, it may work differently on different compiler).
You can use the QObject::Sender function to find which QObject sends the signal. Regarding the first warning in the doc, it's what you are searching for.
you specify different slots for different buttons with same signal.with that you can recognize the different button click
I'm trying to make a subclass of QTableView that has an embedded QLineEdit at the top for filtering the results as-you-type. I need my table to have the same API as a normal QTableView, so I want to subclass it rather than subclassing QWidget and adding a QLineEdit and QTableView to it.
I thought I could just re-implement paintEvent(QPaintEvent*), alter the QPaintEvent's rect() to start a bit lower (the height of a QLineEdit, so it draws under it) and then pass it thru to QTableView::paintEvent(), but the QPaintEvent argument only dictates what region needs to be repainted, not the region where the widget should be painted.
Anything you do in this regard is going to be hacky and result in just as much work (probably more work) as manually mapping all of the signals and slots to a child widget. You'll need to do a lot more than just change the paint events, you'd also have to adjust all of the mouse events, adjust any update rectangles, etc.
Alternatively you could just take the QTableView class from the Qt source and modify it directly (though that will probably break the LGPL and require you to publish your source if you don't have a commercial license.) But the easiest clean method is going to be implementing a container widget with the QTableView as a child.
I would try overriding the paintEvent, changing the widget::pos to be abit lower than it is and call QTableView::paintEvent()
I have to agree with Daniel: I don't think this is the right approach. You will likely want to create a custom widget with a line edit for performing the filtering. Otherwise, you will be entering into the challenging world of Qt hacking.
If you really need to provide access to the QTableView interface then simply add a public get method that returns a reference to the table.
This is somewhat similar to how Qt provides a QTabWidget class that inherits QWidget but has a private QTabBar that it uses internally. One significant difference is that it provides a protected tabBar() accessor rather than a public one.
In my app have a window splitted by a QSplitter, and I need to remove an widget.
How can I do that? I can't find useful methods
It's not clear to me if you want to preserve the widget and put it somewhere else, or if you want to destroy the widget.
Destroying the widget: If you can
get a pointer to the widget, you can
simply delete it. The splitter will
safely be notified that its child is
being deleted and will remove it
from itself.
Preserving the widget: If you grab
the pointer to the widget, you can
simply set its parent to some other
widget and add it to another
widget's layout and it will show up
there. This is safe because the
QSplitter will be notified that one
of its children is being reparented.
If you want to set the parent to NULL (cjhuitt's answer) be aware that you are now responsible for cleaning up that memory because the widget no longer has a parent.
Many things in Qt cannot be "traditionally" removed. Instead call hide() on it and destruct it. From QSplitter documentation:
When you hide() a child its space will
be distributed among the other
children. It will be reinstated when
you show() it again.
I like Tuminoid's answer. But if you absolutely need it removed, try getting the widget you want to remove, and calling setParent( NULL ) on that widget. That's my best guess.
If you hold a pointer to the widget, then just delete it, or use deleteLater() if you want to be on the safe side.
If you do not have the widget pointer, use QSplitter::widget(int index) function. Then, you can use invoke its deleteLater() slot.
If you do not have the widget index, but you still know the widget objectName(), then QObject::findChild() is your only way to get the widget pointer.
I ran into the same problem. In Qt 4.8 to temporally hide one of the widget of a QSplitter I simply hide it. However it is not enough, as the splitter handle is still available to move. But the handle can be accessed and hidden as well:
frameA->setVisible(conditionA);
frameB->setVisible(conditionB);
if ( !(conditionA && conditionB) ) // if only 1 frame is visible
{
splitter->handle(0)->setVisible(false);
}
Another easy way to prevent the child widget from getting deleted is to use QSplitter.takeWidget(child). This is also the recommended way of removing the widget from a splitter. (Qt Documentation)