Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 7 years ago.
Improve this question
My host operating system is Ubuntu 12.04, in which I have VirtualBox installed. Then I have two Windows 7 guest machines configured in the VirtualBox. I need to communicate between the two Windows machines. I have tried using Bridged Networking and Internal Networking with reference to the following article:
http://www.virtualbox.org/manual/ch06.html
I used the same network name for both networking types in my experiments. However, I'm still unable to ping from one Windows machine to the other. If there is anyone who has done this, please give me some guideline how to do so.
Thank you.
It should work with Bridge networking, when both virtual boxes (and eventually also the host) will be on the same LAN.
HOWEVER, Notice that typically Windows will respond to ping request ONLY if there is at least one shared folder! If you don't have any shared folders, Windows will not return the ping, and that's where the problem may be.
So I suggest you share a folder on both Windows machines, set them up with bridge networking and try to ping again.
Hope that help!
Perhaps you could try the suggestions here.
Working solution involves a combination of Bridged Adapter + NAT + Host-only Adapter.
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 4 years ago.
Improve this question
So the reason I am writing here is because I did not find a solution for this problem anywhere else. Hence, Kindly read the whole post before marking it as a duplicate thread. And if indeed, this question is answered, kindly lead me to it.
So I have a Dell XPS 13 9350 with Windows 10 on it. I installed Virtual Box and run Windows 7 on it. Now here is the problem, the network adapter works fine but it shows as an ethernet adapter and not as a wireless adapter. And I want it to be a wireless adapter so I can connect it to the EZCast Dongle I use.
Here is what I have done so far -
I have left the Virtual Box network preference to default
I have changed the network adapter to Bridge Mode & selected my Wlan adapter on the VM machine settings
Kindly request you all to help me out with this.
Cheers,
Jesse
Connect your dongle with host. Enable USB in virtual box settings and select the dongle.
save configuration and reboot your guest.
Ex:
Maybe you need to download and install the Extension Pack to enable USB ports.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
I'm running an ASP.NET web site through IIS from my computer.
I can access this website with ip address from my computer like http://192.168.2.3:81/
The question is how to access this website from other computers?
you need to open 81 port for your site in Windows Firewall on your computer so that you can access it from other computer.
Please refer here
you can access the url within local system without any issues...but if you want to access your website remotely from other system then you must have to allow that port(here 81) in windows firewall...once that port is opened then other machines can able to access your application with that port...
For enabling port in windows firewall do the following steps
1.Start -> run -> wf.msc (Windows Firewall shortcut)
Goto inbound rules -> new rule
3.give the port number as per your requirement
4.Finish
5.Access your application across the world...Enjoy!!!
For complete reference follow the Microsoft official link below
http://windows.microsoft.com/en-us/windows/open-port-windows-firewall#1TC=windows-7
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 9 years ago.
Improve this question
I am using ESXi server and run VMs using vSphere client. I was using shared folders options in VMware but I cannot find this option in these VMs now. How can I create a shared folder or how can I transfer files between VMware virtual machines easily? Thanks.
If you only need to transfer files from the host to the guest, the simplest solution is to create an ISO image and attach it to the virtual CD/DVD drive. For example, on Linux, the following command creates an ISO image foo.iso from the bar directory, preserving long file names (-J).
genisoimage -o foo.iso -J bar
If you need something more complex than that, ESXi has no such built-in method, it's best to set up a VM for such things with an (S)FTP, SMB or NFS service.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
Is it possible to run more than one virtual machines on my PC using virtual box/ vmware/ virtual pc etc and connecting all of them together? So if i write an application like a chat program or something else, it treats running image as separate machine.
All machines should have different IP addresses and they could have different OS as well.
Please tell me how can i do this.
You will have to start with a machine that has loads of RAM and CPU power. Other than that there is nothing difficult. All you have to do is install virtual box(Freely available) And download several Linux flavors(You can use windows too) mount the drives in virtual box and start creating the machines. You can start all of them together if you want to and they will have different IP addresses.
Read
http://forums.virtualbox.org/viewtopic.php?p=33943#33943
http://www.virtualbox.org/manual/ch02.html
http://www.virtualbox.org/manual/ch03.html
Finally
http://www.virtualbox.org/manual/ch06.html#network_internal
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
Is there a way to serve a site off my personal computer to other computers on my network?
I have a website that I created that I would like to have others in the same building be able to access it, but not over the internet. I would also not like to have to purchase a domain name.
You can have users access a site on your internal network by running some HTTP Server like Apache HTTPD (an easy installer is included in WampServer) or Microsoft IIS.
If you go the WampServer route, it has an option for making your site available to other computers ("Put Online"); this exposes the website to any computer which can reach yours. Other people in your building would be able to type your local IP address into their web browser and access your site.
For example, if your local IP address is 192.168.0.101, users should be able to access your site using a URL like this: http://192.168.0.101/
Yes you can do that. you need to host your web site in your local computer and then others in your local network can access it using the ip address.