When I try to publish code using Web Deploy method I am getting the following error
ERROR_DESTINATION_NOT_REACHABLE: Web deployment task failed. (Could not connect to the remote computer ("xxxxx.xxxxxxx.xxx.xxxx"). On the remote computer, make sure that Web Deploy is installed and that the required process ("Web Management Service") is started
On my server,I have web deployer 3.5 install and web management service is also running.
There is no firewall issue also.
I have restarted the web management service still no luck
If you want to publish a site on a remote server you could follow the below steps:
Go to the Start menu and right-click the cmd.exe and then select Run as Administrator.
Enter the following in the command prompt:
winrm quickconfig
winrm set winrm/config/client #{TrustedHosts="*"}
On the target server, open a command prompt as an Administrator and
enter the following:
winrm quickconfig
winrm set winrm/config/client #{TrustedHosts="IP_ADDRESS"}
where IP address is the IP address of your remote server.
make sure you installed Management service.
-after doing all the above things open iis.
carete site with a blank folder at the destination (remote server)
go back to the server from which you want to publish a site and select Publish.
On the Publish page, click the icon labeled IIS, FTP, etc.
In the Publish Method list box, select Web Deploy:
or if you want to publish as an application under any site:
no need to create site at the destination server.
enter your site name in the site name and enter your application name after /.
Regards,
Jalpa
Error image Unable to Remote Deploy my Webservice on to the remote machine from local machine. I have two servers that i would be needing to enable web deployment from local system to remote server Windows 2012 system. Upon searching multiple resources i found below steps that need to be ensured before performing the remote deploy using MsDeploy from Local to Remote .
Also Package works fine which is built from Visual Studio if i copy the files on to the remote server and run the command file it is able to deply the windows service on to IIS locally . But i would need this to be deployed from my local machine to remote server*
Steps I tried :
Ensure Web Deploy is installed.
Remote Services are running.
Under Management Service in IIS ensure Enable Remote connections
is enabled.
Ensure 80 and 8172 Ports are enabled and running ( ran the below steps )
Web Deploy is installed on the server that i'm trying to deploy the
package.
I try running the below code and it returns below error :
Command I provide :
C:\Users\xxxxx>net start wmsvc
The requested service has already been started.
C:\Users\xxxxxx>net start msdepsvc
The requested service has already been started.
Command I provide :
C:\Program Files\IIS\Microsoft Web Deploy V3>msdeploy.exe -verb:sync -source:package="C:\Users\xxxxxx\Desktop\" -dest:auto="",ComputerName="https://serveripaddress:8172/MsDeploy.axd",UserName='domain/user',Password='password',AuthType='Basic' -allowUntrusted
Info: Using ID 'someinfoid like : 92c-da-sd-2398as823...... is generated' for connections to the remote server.
Error Code: ERROR_DESTINATION_NOT_REACHABLE
More Information: Could not connect to the remote computer (""). On the remote computer, make sure that Web Deploy is installed and that `the required process ("Web Management Service") is started.
Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DESTINATION_NOT_REACHABLE.
Error: The remote server returned an error: (404) Not Found.
Error count: 1.
Installed Web Deploy Components
Ensured the Services are enabled ( Web Deploy / Remote Services )
Remote Server : Windows 2012
Local System : Windows 10
Actually,I got error when I deploy use "MSDeployUseChecksum" ,if remove "MSDeployUseChecksum", deploy will successed. C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\Web\Microsoft.Web.Publishing.targets(4295,5): msdeploy error ERROR_PROXY_GATEWAY: Web deployment task failed. (Could not connect to the remote computer ("dev-cms.scm.didix-dev-ase.p.azurewebsites.net") using the specified process ("Web Management Service"). This can happen if a proxy server is interrupting communication with the destination server. Disable the proxy server and try again. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_PROXY_GATEWAY.
pubxml file
I have developed several ASP.NET 4.5 applications and I want to publish them to a remote computer running IIS 8, using Web Deploy.
I created two sites in IIS8, Site1 and Site2. I created a single IIS User and I gave permission to access both sites to this user.
I can publish the first site via Web Deploy, but I cannot publish the second site.
When I try to publish the second site, I get this error in Visual Studio
2>Start Web Deploy Publish the Application/package to https://27.147.144.98:8172/msdeploy.axd?site=NSU ...
2>Adding ACL's for path (NSU)
2>C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v12.0\Web\Microsoft.Web.Publishing.targets(4255,5): Error : Web deployment task failed. ((6/30/2015 12:36:37 PM) An error occurred when the request was processed on the remote computer.)
2>
2>(6/30/2015 12:36:37 PM) An error occurred when the request was processed on the remote computer.
2>The server experienced an issue processing the request. Contact the server administrator for more information.
2>Publish failed to deploy.
The first site is published correctly always. The problems occurs only for the second site.
I had this error but also had Fiddler2 running which seemed like it was interfering with the deployment. When I closed it, things worked again. Make sure you test the connection beforehand.
I'm integrating MSDeploy into my build process, and having problems authenticating. The following command works fine:
msdeploy -verb:sync -source:appHostConfig="KitchenPC",computerName=192.168.0.3,userName=Administrator,password=secret -dest:package=c:\DeployTest\KPC.zip
However, this does NOT work:
msdeploy -verb:sync -source:appHostConfig="KitchenPC",computerName=192.168.0.3,userName=kpcpublish,password=secret -dest:package=c:\DeployTest\KPC.zip
And yields the error:
Error Code: ERROR_USER_NOT_ADMIN
More Information: Connected to '192.168.0.11' using the Web Deployment Agent Service, but could not authorize. Make sure you are an administ
rator on '192.168.0.11'. Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_USER_NOT_ADMIN.
Error: The remote server returned an error: (401) Unauthorized.
Error count: 1.
I've followed the instructions in the link above, and any other docs I could find, which pretty much all say the same thing:
I created an account called kpcpublish
I added this account to a group called MSDepSvcUsers - Heck, I even added the account to Administrators
I right clicked on the site and selected Deploy->Configure Web Deploy Publishing and added kpcpublish to the list. It says the following:
.
Publish enabled for 'SERVER\kpcpublish' Granted 'SERVER\kpcpublish'
full control on 'C:\Website' Successfully created settings file
'C:\Users\Administrator\Desktop\SERVER_kpcpublish_KitchenPC.PublishSettings'
There must be some step I'm missing, but I just can't figure out what could be.
UPDATE:
Using the full HTTP path for the computerName property, I get the error:
Error Code: ERROR_DESTINATION_NOT_REACHABLE More Information: Could
not connect to the remote computer ("192.168.0.3"). On the remote
computer, make sure that Web Deploy is installed and that the required
process ("Web Management Service") is started. Learn more at:
http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_DES
TINATION_NOT_REACHABLE. Error: Unable to connect to the remote server
Error: A connection attempt failed because the connected party did not
properly respond after a period of time, or established connection fa
iled because connected host has failed to respond 192.168.0.3:8192
Error count: 1.
I've checked and the Web Management Service is indeed running.
Another Update:
I've completely paved the system and set it up again from scratch. I've done nothing out of the ordinary, just installed the IIS role and made sure to check "Management Service" under Management Tools, which is required for WMSVC to run. I then installed Web PI, and installed "Recommended Configuration for Hosting Providers", which will install Web Deploy 3.0. However, I did notice there was an error while installing this (I believe I got this error the last time as well). It looks like:
I've also attached the log files here.
I then tried to install Web Deploy 3.0 manually, however it says it's already installed. Next, I downloaded the MSI directly from http://www.iis.net/download/webdeploy and ran it in "Repair" mode. That seems to have worked. I also noticed that the WMSVC service is up and running. So this looks good.
Still, MSDeploy will not connect. I thought it might be some sort of firewall issue, so I ran it locally. I've tried using both HTTPS and HTTP to connect. HTTPS gives me an error, HTTP just times out after 2-3 minutes.
HTTPS:
msdeploy -verb:sync -source:appHostConfig="Default Web Site",computerName=https://STAGING:8172/msdeploy.axd,userName=Administrator,password=Khorf123 -dest:package=c:\DeleteMe.zip
Info: Using ID 'f3a54096-adc4-4f54-9e4f-ad8fde12edb6' for connections to the remote server.
Error Code: ERROR_CERTIFICATE_VALIDATION_FAILED
More Information: Connected to the remote computer ("staging") using the specified process ("Web Management Service"), but could not verify the server's certifi
cate. If you trust the server, connect again and allow untrusted certificates.
Learn more at: http://go.microsoft.com/fwlink/?LinkId=221672#ERROR_CERTIFICATE_VALIDATION_FAILED.
Error: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
Error: The remote certificate is invalid according to the validation procedure.
Error count: 1.
HTTP:
msdeploy -verb:sync -source:appHostConfig="Default Web Site",computerName=http://STAGING:8172/msdeploy.axd,userName=Administrator,password=Khorf123 -dest:package=c:\DeleteMe.zip
Info: Using ID 'ebee66f0-08e5-4d9d-98ea-0c2e59784895' for connections to the remote server.
Error: Could not complete the request to remote agent URL 'http://staging:8172/msdeploy.axd'.
Error: The operation has timed out
Error count: 1.
(Updated 2016-03-07 - NOTE: non-Administrator deployments also require ?site=IIS_SITE_NAME after msdeploy.axd, otherwise the connection is treated as global and requires Administrator access)
Not sure how missed this originally, but your problem is the computerName parameter. Non-administrator deployments are only supported when using WMSVC, for which you need to specify the full URL.
Try the following
msdeploy -verb:sync ^
-source:appHostConfig="KitchenPC",computerName=https://192.168.0.3:8172/MsDeploy.axd,userName=kpcpublish,password=secret,authType=Basic ^
-dest:package=c:\DeployTest\KPC.zip
From the docs:
The computer name will be translated to the default Web Deploy URL. For example, computerName=Server1 will become http://Server1/MsDeployAgentService. If the remote service is running with a custom port or URL, you must specify the full URL
And from the install instructions:
The MSI will not install the Web Management Service handler component if the Web Management Service is not installed; the handler component is necessary for non-administrator deployments
(I couldn't find a more explicit canonical source that describes WMSVC as a requirement for non-admin deployments)
Figured It Out!
So, it seems that (at least by default), WMSVC only listens on HTTPS, and HTTP will just time out. However, since my certificate was self-signed, I had to use the -allowUntrusted command line option.
That was almost enough. I also had to specify authType=Basic like Richard originally suggested. So, to put it all together, this is the MSDeploy command line that will actually work:
msdeploy -verb:sync -source:appHostConfig="Default Web Site",computerName=https://192.168.0.3:8172/msdeploy.axd,authType=Basic,userName=Publish,password=secret -dest:package=c:\DeployTest\KPC.zip -allowUntrusted
After configuring Web Deploy my server as follows. I continued to get HTTP 404 connection failures. In may what worked for me was the following additional efforts...
Uninstall all previous version of Web Deploy that existed. I was not even aware they existed; however, previous versions appear to conflict with completing a connection to the latest Web Deploy service. Newer version don't uninstall their predecessors. In the last part, I was getting HTTP 401.7 - File Extension Denied.
For good measure, performed a repair of the current version of Web Deploy, currently Microsoft Web Deploy 3.6
For good measure, recreate and import my Visual Studio 2013 deployment profile...
recreate the publish settings file using the Configure Web Deploy Publishing dialogue available from the Deploy context menu option of the target website in IIS Manager's Connections panel. (Note, the publish settings file will be recreated when you press Setup as the file whose full path is specified in the dialogue entry, Specify a location to save the publish settings file)
Copy or otherwise make the publish settings file available to Visual Studio and selecting Publish from your project's context menu, create a Visual Studio publish profile by importing the publish settings file.
Try restarting the wmsvc service on the target machine
As alluded to above, make sure that you are connecting over HTTPS. If you are attempting to connect as Admin, but not using SSL, you get the following error:
Error Code: ERROR_USER_NOT_ADMIN
More Information: Connected to 'host' using the Web Deployment Agent Service, but could not authorize. Make sure you are an administrator on 'host'.
(Where 'host' is your server name)
For me the problem was that my password expired... I've noticed it when loging out and then tried to login back trhough remote desktop.