I followed Backup and restore method in alfresco share instead of import/export. It is now working as i expected in new Alfresco, i can see the content in sites, can view files in site document library, can view events, workflow,users,groups and so on. Everything goes fine except that the repository is not loading, but When i search for files in repository it is showing "3 result(s) found in Quality site."...but it is not displaying those files.
In my old Alfresco i have set permissions for folders in repository...will it cause any error to load repository in my new alfresco?
It shows following error when i close my server...
log4j:ERROR LogMananger.repositorySelector was null likely due to error in class reloading, using NOPLoggerRepository.
Kindly look into my issue and give some suggestion......
that error means that the log4j tries to log something in the log file of the webapp but Tomcat already shut down. have you sufficient/right permissions on the new restored alfresco installation?
If you followed correctly the backup/restore procedure from the wiki, the permissions on nodes of the repository also come together. But, if you want to reset and rebuild all the permission, you could perform a FULL reindex with the string appended to alfresco.global.properties:
index.recovery.mode=FULL
Related
In the past I was able to view the contents of my raw repository to which I upload my javadoc sites (through dav:http:// using mvn site-deploy):
e.g. Accessing from the browser: http://myserver/nexus/content/sites/my-raw-repository/ would list the subdirectories.
Now (after admin upgraded to nexus 3.20) directory-listing does not work and I have to explicitly request for a resource page e.g.:
http://myserver/nexus/content/sites/my-raw-repository/artifact-site-name/1.0.0/apidocs/index.html
Is there a way to bring back the directory listing?
This closed issue says that nexus3 supports it, but I cannot figure out how.
I found the issue. The repository browser url is now differrent.
content/sites has become: service/rest/repository/browse.
(The old path is still available but with no directory listing. Based on the findings below, I guess it is deprecated)
I went to the browse left-menu-option -> select the raw repository -> clicked on the Html View link and it took me to the correct location.
The new link is now: http://myserver/nexus/service/rest/repository/browse/my-raw-repository/
Something noteable is that now when reaching the actual resource file (e.g. html),
that resource file link is differrent: http://myserver/nexus/repository/my-raw-repository/path/to/the/htmlpage.html
so instead of service/rest/repository/browse/my-raw-repository/ it is repository/my-raw-repository/ (which also does not support directory listing)
i know that people couldn't say that this is trivial, but i have search for days in internet and can not be able to do this.
i am using visual studio 2010 ultimate and have created my setup with setup and deployment of vs 2010.the problem is that i have an application folder which contains my database and which is deployed with my application. When i deploy it in administrator part of computer, all is correct, i devined that it is due to fullcontrol permission of administrator programfiles folder.But when i deploy it in another account, application don't has access to database for writting. i looked for the web site and understood that this is due to programfiles folder permission for others users.So i decide to do another research in order to give more rights to users for this folder.
I finally understood that i can achieve this with authoring tools like robocopy by using custom action or with a command line by just correctly write my custom action. After more researchs, i understood that i can do it with a command line which use robocopy and give folder permission during installation for this custom action or only with custom action.
for custom action, i tried many links, but the best link that i obtained was (How to give Read/Write permissions to a Folder during installation using .NET) without success (i change /folder="[CommonAppDataFolder][ProductName] with /folder="[CommonAppDataFolder][Manufacturer][ProductName] in customactiondata" due to the fact that product name is in my manufacturer folder").i don't understand why this code don't change folder permissions during installing and don't know how i can use robocopy or icalcs in custom action to change folder permissions during installation. my setup and others requirements have been packaged with dotnetInstaller, i dont know if i can be able to continue use it.
please, i greatly need your help to be able to do this
i have solved the problem. After many trying, i understood that i was giving permission to the wrong folder because my documents and database were contained in programfile folder. after understand this, i only change the place to set permission by :/folder="[ProgramFilesFolder][Manufacturer][ProductName]" and permission have been setted.
I already made pipeline. Which is working fine. Suddenly it give error like
2015-12-18 02:39:08.091 GMT] ERROR system.core ISH-CORE-2368 Sites-SiteGenesis-Site core Storefront [uuid] [request-id]-0-00 [timestamp] "Error executing pipeline: Hello com.demandware.beehive.core.capi.pipeline.PipelineExecutionException:Pipeline not found (Hello) for current domain (Sites-SiteGenesis-Site)"
Does anybody know how to solve this?
In the event that your pipeline can not be found for the selected domain, please go trough and verify all of the following:
Double check Pipeline-Node naming
Pipeline URLs are generated by their name and your desired entry node, in this scenario, I would expect a file named Hello.xml in you cartridge's pipeline directory, and a start node named Start, would be accessed via {instanceURL}/on/demandware.store/Sites-mySite-Site/Hello-Start
Try and force upload of your cartridges
Occasionally the files on the server will not be updated correctly when a save is made; to force an update, right click your project, click Demandware > Upload Cartridges
Check your Cartridge Path
If you are using a shared instance, or your instance is re-provisioned, you may need to check your cartridge path to be sure your custom cartridge(s) are still there.
Check your Code Versions
Occasionally you may increment / change your code version - if you do, make sure that the path you select in Studio is the one that you have selected in Business Manager.
Tech Support
Should you still have issues following the four steps above, please file a support ticket and the tech-support team will be able to provide you with more assistance.
We have a situation, where a node (It was a client lib folder) got deleted from AEM repository, not sure which user did this. I was looking, if AEM stores Node/Folder deletion history somewhere, so that we can identify, who had taken action of deleting the node.
Few options I tried/was thinking of
Tried to check logs, if there some info, but on creation or deletion of node, didn't see any logs with node name
Have a content change listener on repo, but that will load AEM un-necessarily. Also this will not give information on nodes which were deleted before listener was registered.
Is there a audit log or history stored for deleted nodes in AEM?
Yes AEM can store and provide audit log entries for WCM events like e.g. page modifications.
But it requires the audit logger to be enabled (through the configuration admin console /system/console/configMgr).
If this is the case then check either the audit.log file in your logs directory or the audit records below /var/audit
If it is a client lib folder that got deleted, then audit log won't help you much because it logs pages/dam creation/changes/deletion events.
You need to write your own listener for that, which will just make the repository grow.
I can only think of it happening on a dev like env as write access to /etc or /apps should be restricted on prod like envs.
Anyway to restore the content just reinstall the package through which the clientlib got installed.
I'm facing a problem, and don't know if anybody has solved this issue.
I'm using Tridion webdav (Tridion 2011 SP1 HR1) to insert structured content (folders + binary files) into a publication.
All goes well when the folder doesn't exist, but if the folder exist, then an error appear:
You do not have permission to access this Web Folder location
Watching the log files, the problem is that Tridion tries to create a new folder when I drag & drop an existing folder, and rename to the folder title, giving an error:
Name must be unique for items of type: Folder/Virtual Folder within this Folder and its BluePrint context.
I tried using Events to avoid saving the folder when it exists (throwing an exception in the initiated phase), but the permission error appears when updating the content inside the folder.
Has anyone tried to do something alike?
Has anyone any sugestion I can try?
Thank you all in advance.
This has nothing to do with Tridion as you are using Windows Explorer to access WebDAV, so if anything it's the Explorer who is to blame for sending wrong requests, but if you will take a look at WebDAV sprcification here: http://www.webdav.org/specs/rfc4918.html, you can see all the possible calls under chapter 9.
Tridion Folders are treated as collections, so there's a MKCOL call to create a folder, but if you will check 9.7.2 PUT for Collections, you will see:
9.7.2 PUT for Collections
This specification does not define the behavior of the PUT method for existing collections. A PUT > request to an existing collection MAY be treated as an error (405 Method Not Allowed).
The MKCOL method is defined to create collections.
So there's no way to update existing folders, it's create and upload contents, indeed.
You can also check this article if you are interested in WebDAV protocol: http://amarchuk.blogspot.nl/2011/10/heres-c-webdav-client-that-works-with.html