Create new sql entry with one value being MAX(Column)+1 gives Invalid use of group function - asp.net

I want to manually create a ID field where I do MAX + 1, and I want to do it in one QUERY so I am certain 2 entries cant get the same field.
using (MySqlConnection dbConn = new MySqlConnection(ConfigurationManager.ConnectionStrings["ProjektConStr"].ConnectionString))
{
dbConn.Open();
using (MySqlCommand cmd = new MySqlCommand("INSERT INTO Submission (CaseId , SubjectId, CenterId, EmployeeName, Reason, Description, Explanation, Date, Done, ChiefLevel) VALUES (MAX(CaseId)+1, #subject_id, #center_id, #employee_name, #reason, #description, #explanation, #date, #done, #chief)", dbConn))
{
cmd.Parameters.AddWithValue("date", submission.Date);
cmd.Parameters.AddWithValue("subject_id", submission.SubjectId);
cmd.Parameters.AddWithValue("center_id", submission.CenterId);
cmd.Parameters.AddWithValue("employee_name", submission.EmployeeName);
cmd.Parameters.AddWithValue("reason", submission.Reason);
cmd.Parameters.AddWithValue("description", submission.Description);
cmd.Parameters.AddWithValue("explanation", submission.Explanation);
cmd.Parameters.AddWithValue("done", false);
cmd.Parameters.AddWithValue("chief", false);
cmd.ExecuteNonQuery();
}
}


Use subquery to select max and insert a value
INSERT INTO Submission (CaseId , SubjectId, CenterId, EmployeeName, Reason, Description, Explanation, Date, Done, ChiefLevel) VALUES (
(1 + coalesce((SELECT max(CaseId) FROM Submission), 0))
, #subject_id, #center_id, #employee_name, #reason, #description, #explanation, #date, #done, #chief)


using (MySqlCommand cmd = new MySqlCommand("INSERT INTO Submission
(CaseId , SubjectId, CenterId, EmployeeName, Reason, Description, Explanation,
Date, Done, ChiefLevel)
VALUES ((select MAX(CaseId)+1 from YourTable),
#subject_id, #center_id, #employee_name, #reason, #description, #explanation,
#date, #done, #chief)", dbConn))


You cannot do this in a single query, Either you have to fetch the MAX_id and then increment that, and insert or You can make the table as autoincrement, Here you dont have to include the id in the insert query.

Related

JDBC - SQLITE Select to variable

I am trying to run a query / select statement and save it in a variable. I know how to get something specific from a specific column but not from counting rows.
This is working as I getting MYID specifically.
ResultSet MYIDrs = stmtCFG.executeQuery( "SELECT rowid, MYID from MYINDEX order by rowid desc limit 1;" );
MYID = MYIDrs.getString("MYID");
Now I am trying to count the rows that works in SQLite client but not in the jdbc as I can't figure out what to request.
this is what I have but is not resulting in what I am expecting.
ResultSet FILE_COUNTrs = stmtCFG.executeQuery( "SELECT count(*) from TABLE where MYID = '"+MYID+"';");
FILE_COUNT = FILE_COUNTrs.getString(?????);
problem or question is: What do I put in the ????? as I already tried everything.
I am expecting to see a number.

I am really sorry I found what I was looking for by assigning a name TOTAL
This is my code and it works...
ResultSet FILE_COUNTrs = stmtCFG.executeQuery( "SELECT count(*) AS TOTAL from TABLE where MYID = '"+MYID+"';");
FILE_COUNT = FILE_COUNTrs.getString("TOTAL");

You use wrong data type. COUNT(*) returns Integer type, Not String.
You can do like this without assigning a label for COUNT(*)
int FILE_COUNT = FILE_COUNTrs.getInt(1); // 1: is the column index of COUNT(*)

how to change the auto generate id key in sqlserver [duplicate]

I have SQL Server database and I want to change the identity column because it started
with a big number 10010 and it's related with another table, now I have 200 records and I want to fix this issue before the records increases.
What's the best way to change or reset this column?

You can not update identity column.
SQL Server does not allow to update the identity column unlike what you can do with other columns with an update statement.
Although there are some alternatives to achieve a similar kind of requirement.
When Identity column value needs to be updated for new records
Use DBCC CHECKIDENT which checks the current identity value for the table and if it's needed, changes the identity value.
DBCC CHECKIDENT('tableName', RESEED, NEW_RESEED_VALUE)
When Identity column value needs to be updated for existing records
Use IDENTITY_INSERT which allows explicit values to be inserted into the identity column of a table.
SET IDENTITY_INSERT YourTable {ON|OFF}
Example:
-- Set Identity insert on so that value can be inserted into this column
SET IDENTITY_INSERT YourTable ON
GO
-- Insert the record which you want to update with new value in the identity column
INSERT INTO YourTable(IdentityCol, otherCol) VALUES(13,'myValue')
GO
-- Delete the old row of which you have inserted a copy (above) (make sure about FK's)
DELETE FROM YourTable WHERE ID=3
GO
--Now set the idenetity_insert OFF to back to the previous track
SET IDENTITY_INSERT YourTable OFF

If got your question right you want to do something like
update table
set identity_column_name = some value
Let me tell you, it is not an easy process and it is not advisable to use it, as there may be some foreign key associated on it.
But here are steps to do it, Please take a back-up of table
Step 1- Select design view of the table
Step 2- Turn off the identity column
Now you can use the update query.
Now redo the step 1 and step 2 and Turn on the identity column
Reference

You need to
set identity_insert YourTable ON
Then delete your row and reinsert it with different identity.
Once you have done the insert don't forget to turn identity_insert off
set identity_insert YourTable OFF

--before running this make sure Foreign key constraints have been removed that reference the ID.
--set table to allow identity to be inserted
SET IDENTITY_INSERT yourTable ON;
GO
--insert everything into a temp table
SELECT *
INTO #tmpYourTable
FROM yourTable
--clear your table
DELETE FROM yourTable
--insert back all the values with the updated ID column
INSERT INTO yourTable (IDCol, OtherCols)
SELECT ID+1 as updatedID --put any other update logic to the ID here
, OtherCols FROM #tmpYourTable
--drop the temp table
DROP TABLE #tmpYourTable
--put identity back to normal
SET IDENTITY_INSERT yourTable OFF;
GO

Try using DBCC CHECKIDENT:
DBCC CHECKIDENT ('YourTable', RESEED, 1);

SET IDENTITY_INSERT dbo.TableName ON
INSERT INTO dbo.TableName
(
TableId, ColumnName1, ColumnName2, ColumnName3
)
VALUES
(
TableId_Value, ColumnName1_Value, ColumnName2_Value, ColumnName3_Value
)
SET IDENTITY_INSERT dbo.TableName OFF
When using Identity_Insert don't forget to include the column names because sql will not allow you to insert without specifying them

DBCC CHECKIDENT(table_name, RESEED, value)
table_name = give the table you want to reset value
value=initial value to be zero,to start identity column with 1

copy your table to a new table without identity column.
select columns into newtable from yourtable
add an identity column to newtable with new seed and make it as a primary key
ALTER TABLE tableName ADD id MEDIUMINT NOT NULL AUTO_INCREMENT KEY

You can also use SET IDENTITY INSERT to allow you to insert values into an identity column.
Example:
SET IDENTITY_INSERT dbo.Tool ON
GO
And then you can insert into an identity column the values you need.

I had similar problem I needed update some IDs what I did was ( i needed to Increase them by 10k ):
set identity_insert YourTable ON
INSERT INTO YourTable
([ID]
,[something1]
,[something2]
,[something3])
SELECT
([ID] + 10000)
,[something1]
,[something2]
,[something3])
FROM YourTable
WHERE something1 = 'needs updeted id'
AND something2 = 'some other condition'
set identity_insert YourTable OFF
DELETE FROM YourTable
WHERE ID >= 'your old ID From'
AND ID <= 'Your old ID To'
And that's it. Hope you understand this logic, in my case there was also PK-FK keys connection with other tables, which meant i had to update them, before i could delete from 'YourTable' original rows.
I know there is already answers to this I just wanted to leave SQL query as example,

ALTER TABLE tablename add newcolumn int
update tablename set newcolumn=existingcolumnname
ALTER TABLE tablename DROP COLUMN existingcolumnname;
EXEC sp_RENAME 'tablename.oldcolumn' , 'newcolumnname', 'COLUMN'
update tablename set newcolumnname=value where condition
However above code works only if there is no primary-foreign key relation

Complete solution for C# programmers using command builder
First of all, you have to know this facts:
In any case, you cannot modify an identity column, so you have to delete the row and re-add with new identity.
You cannot remove the identity property from the column (you would have to remove to column)
The custom command builder from .net always skips the identity column, so you cannot use it for this purpose.
So, once knowing that, what you have to do is. Either program your own SQL Insert statement, or program you own insert command builder. Or use this one that I'be programmed for you. Given a DataTable, generates the SQL Insert script:
public static string BuildInsertSQLText ( DataTable table )
{
StringBuilder sql = new StringBuilder(1000,5000000);
StringBuilder values = new StringBuilder ( "VALUES (" );
bool bFirst = true;
bool bIdentity = false;
string identityType = null;
foreach(DataRow myRow in table.Rows)
{
sql.Append( "\r\nINSERT INTO " + table.TableName + " (" );
foreach ( DataColumn column in table.Columns )
{
if ( column.AutoIncrement )
{
bIdentity = true;
switch ( column.DataType.Name )
{
case "Int16":
identityType = "smallint";
break;
case "SByte":
identityType = "tinyint";
break;
case "Int64":
identityType = "bigint";
break;
case "Decimal":
identityType = "decimal";
break;
default:
identityType = "int";
break;
}
}
else
{
if ( bFirst )
bFirst = false;
else
{
sql.Append ( ", " );
values.Append ( ", " );
}
sql.Append ("[");
sql.Append ( column.ColumnName );
sql.Append ("]");
//values.Append (myRow[column.ColumnName].ToString() );
if (myRow[column.ColumnName].ToString() == "True")
values.Append("1");
else if (myRow[column.ColumnName].ToString() == "False")
values.Append("0");
else if(myRow[column.ColumnName] == System.DBNull.Value)
values.Append ("NULL");
else if(column.DataType.ToString().Equals("System.String"))
{
values.Append("'"+myRow[column.ColumnName].ToString()+"'");
}
else
values.Append (myRow[column.ColumnName].ToString());
//values.Append (column.DataType.ToString() );
}
}
sql.Append ( ") " );
sql.Append ( values.ToString () );
sql.Append ( ")" );
if ( bIdentity )
{
sql.Append ( "; SELECT CAST(scope_identity() AS " );
sql.Append ( identityType );
sql.Append ( ")" );
}
bFirst = true;
sql.Append(";");
values = new StringBuilder ( "VALUES (" );
} //fin foreach
return sql.ToString ();
}

There's a few ways to do this as I've seen., but the best and faster way in my opinion is the following one:
The identity columns have a counter that isn't necessarily the same as the columns registered, you can see the value of this counter with the folowing SQL command:
DBCC CHECKIDENT('tableName', NORESEED);
Then, if you want to edit the identity column you will not be able, but I recommend to make a new register after reseeding the counter to the number you need. To reseed the counter use this command:
DBCC CHECKIDENT('tableName', RESEED, desiredNumber);

I have solved this problem firstly using DBCC and then using insert. For example if your table is
Firstly set new current ID Value on the table as NEW_RESEED_VALUE
MyTable {
IDCol,
colA,
colB
}
DBCC CHECKIDENT('MyTable', RESEED, NEW_RESEED_VALUE)
then you can use
insert into MyTable (colA, ColB) select colA, colB from MyTable
This would duplicate all your records but using new IDCol value starting as NEW_RESEED_VALUE. You can then remove higher ID Value duplicate rows once your have removed/moved their foreign key references, if any.

You can create a new table using the following code.
SELECT IDENTITY (int, 1, 1) AS id, column1, column2
INTO dbo.NewTable
FROM dbo.OldTable
Then delete the old db, and rename the new db to the old db's name. Note: that column1 and column2 represent all the columns in your old table that you want to keep in your new table.

I did the following:
MOVE related data into temporary storage
UPDATE primary key/identity column value (dropping and creating constraints)
RE-INSERT related data with new foreign key value
I wrapped my solution in a STORED PROCEDURE:
CREATE PROCEDURE [dbo].[UpdateCustomerLocationId]
#oldCustomerLocationId INT,
#newCustomerLocationId INT
AS
/*
Updates CustomerLocation.CustomerLocationId #oldCustomerLocationId to #newCustomerLocationId
Example:
EXEC [dbo].[UpdateCustomerLocationId]
#oldCustomerLocationId = 6154874,
#newCustomerLocationId = 50334;
*/
BEGIN
SET NOCOUNT ON;
-- exit if #oldCustomerLocationId does not exists
IF NOT EXISTS (SELECT * FROM dbo.CustomerLocation cl WHERE cl.CustomerLocationId = #oldCustomerLocationId)
BEGIN
PRINT CONCAT('CustomerLocationId ''', #oldCustomerLocationId, ''' (#oldCustomerLocationId) does not exist in dbo.CustomerLocation');
RETURN 1; -- 0 = success, > 0 = failure
END
-- exit if #newCustomerLocationId already exists
IF EXISTS (SELECT * FROM dbo.CustomerLocation cl WHERE cl.CustomerLocationId = #newCustomerLocationId)
BEGIN
PRINT CONCAT('CustomerLocationId ''', #newCustomerLocationId, ''' (#newCustomerLocationId) already exists in dbo.CustomerLocation');
RETURN 2; -- 0 = success, > 0 = failure
END
BEGIN TRAN;
BEGIN -- MOVE related data into temporary storage
IF EXISTS (SELECT * FROM dbo.CustomerLocationData t WHERE t.CustomerLocationId = #oldCustomerLocationId) BEGIN
IF OBJECT_ID('tempdb..#CustomerLocationData') IS NOT NULL
DROP TABLE #CustomerLocationData;
SELECT * INTO #CustomerLocationData FROM dbo.CustomerLocationData t WHERE t.CustomerLocationId = #oldCustomerLocationId;
DELETE t FROM dbo.CustomerLocationData t WHERE t.CustomerLocationId = #oldCustomerLocationId;
END
END
BEGIN -- UPDATE dbo.CustomerLocation
-- DROP CONSTRAINTs
ALTER TABLE [dbo].[CustomerLocation] DROP CONSTRAINT [UC_CustomerLocation];
-- INSERT OLD record with new CustomerLocationId
SET IDENTITY_INSERT dbo.CustomerLocation ON;
INSERT INTO dbo.CustomerLocation
(
CustomerLocationId, CustomerId, LocationId, CustomerLocationIdent, CustomerLocationIdent2, LocationIdent, LocationName, CustomerDistrictId,
CustomerLocationGUID, UpdatedOn, IssueManager, EnrollSelfMonitoring, TemperatureControlDeadlineHour, CreatedOn, OperationBegin, ActiveCustomer,
Comments, LocationName2, ParentGroup, TempString1, TempString2, TempString3, TempString4, TempString5, AutoInheritFromLocation, ClassificationPrimary
)
SELECT #newCustomerLocationId AS CustomerLocationId, CustomerId,LocationId, CustomerLocationIdent, CustomerLocationIdent2, LocationIdent, LocationName, CustomerDistrictId,
CustomerLocationGUID, UpdatedOn, IssueManager, EnrollSelfMonitoring, TemperatureControlDeadlineHour, CreatedOn, OperationBegin, ActiveCustomer,
Comments,LocationName2, ParentGroup, TempString1, TempString2, TempString3, TempString4, TempString5, AutoInheritFromLocation, ClassificationPrimary
FROM dbo.CustomerLocation
WHERE CustomerLocationId = #oldCustomerLocationId;
SET IDENTITY_INSERT dbo.CustomerLocation OFF;
-- DELETE OLD record
DELETE cl FROM dbo.CustomerLocation cl WHERE cl.CustomerLocationId = #oldCustomerLocationId;
-- ADD CONSTRAINTS
ALTER TABLE [dbo].[CustomerLocation] ADD CONSTRAINT [UC_CustomerLocation] UNIQUE NONCLUSTERED ([CustomerId], [LocationId]);
END
BEGIN -- re-INSERT related data from temporary storage
IF OBJECT_ID('tempdb..#CustomerLocationData') IS NOT NULL BEGIN
SET IDENTITY_INSERT dbo.CustomerLocationData ON;
INSERT INTO dbo.CustomerLocationData (Guid, CustomerLocationId, CustomerLocationDataTypeId, Date, Category, Data)
SELECT Guid, #newCustomerLocationId CustomerLocationId, CustomerLocationDataTypeId, Date, Category, Data FROM #CustomerLocationData;
SET IDENTITY_INSERT dbo.CustomerLocationData OFF;
END
END
COMMIT TRAN;
END

This happened to me because I did a merge that was updating the ID that I was doing the Merge on.
Example that did not work (note ClownID):
MERGE ArchitectMain.dbo.BackendClowns AS TGT
USING (
SELECT ClownID
,ClownName
,Description
,Active
,EmailSubject
,AddedBy
,Added
FROM #temptable1
) AS SRC(ClownID, ClownName, Description, Active, EmailSubject, AddedBy, Added)
ON (TGT.ClownID = SRC.ClownID)
WHEN MATCHED
THEN
UPDATE
SET ClownID = SRC.ClownID
,ClownName = SRC.ClownName
,Description = SRC.Description
,Active = SRC.Active
,EmailSubject = SRC.EmailSubject
,AddedBy = SRC.AddedBy
,Added = SRC.Added;
Example that worked (note ClownID):
MERGE ArchitectMain.dbo.BackendClowns AS TGT
USING (
SELECT ClownID
,ClownName
,Description
,Active
,EmailSubject
,AddedBy
,Added
FROM #temptable1
) AS SRC(ClownID, ClownName, Description, Active, EmailSubject, AddedBy, Added)
ON (TGT.ClownID = SRC.ClownID)
WHEN MATCHED
THEN
UPDATE
SET ClownName = SRC.ClownName
,Description = SRC.Description
,Active = SRC.Active
,EmailSubject = SRC.EmailSubject
,AddedBy = SRC.AddedBy
,Added = SRC.Added;

Update is not allowed:
but you can
INSERT new data with correct key
Delete reg
import: all fields must be declared in insert into
sample: reg 5 must be changed to 4:
set IDENTITY_INSERT Gastos_ReclamacionCausa on
insert into Gastos_ReclamacionCausa
(IDCausa,TextoCombo,Asunto,Mensaje,EsBaja)
select 4,TextoCombo,Asunto,Mensaje,EsBaja from Gastos_ReclamacionCausa where idcausa=5
delete from Gastos_ReclamacionCausa where idcausa = 5
set IDENTITY_INSERT Gastos_ReclamacionCausa off

If you specifically need to change the primary key value to a different number (ex 123 -> 1123). The identity property blocks changing a PK value. Set Identity_insert isn't going to work. Doing an Insert/Delete is not advisable if you have cascading deletes (unless you turn off referential integrity checking).
EDIT: Newer versions of SQL don't allow changing the syscolumns entity, so part of my solution has to be done the hard way. Refer to this SO on how to remove Identity from a primary key instead:
Remove Identity from a column in a table
This script will turn off identity on a PK:
***********************
sp_configure 'allow update', 1
go
reconfigure with override
go
update syscolumns set colstat = 0 --turn off bit 1 which indicates identity column
where id = object_id('table_name') and name = 'column_name'
go
exec sp_configure 'allow update', 0
go
reconfigure with override
go
***********************
Next, you can set the relationships so they'll update the foreign key references. Or else you need to turn off relationship enforcement. This SO link shows how:
How can foreign key constraints be temporarily disabled using T-SQL?
Now, you can do your updates. I wrote a short script to write all my update SQL based on the same column name (in my case, I needed to increase the CaseID by 1,000,000:
select
'update ['+c.table_name+'] SET ['+Column_Name+']=['+Column_Name+']+1000000'
from Information_Schema.Columns as c
JOIN Information_Schema.Tables as t ON t.table_Name=c.table_name and t.Table_Schema=c.table_schema and t.table_type='BASE TABLE'
where Column_Name like 'CaseID' order by Ordinal_position
Lastly, re-enable referential integrity and then re-enable the Identity column on the primary key.
Note: I see some folks on these questions ask WHY. In my case, I have to merge data from a second production instance into a master DB so I can shut down the second instance. I just need all the PK/FKs of operations data to not collide. Meta-data FKs are identical.

Conversion failed when converting the nvarchar value 'aaa' to data type int

I am getting the error in the title when trying to do a simple search from a textbox through an SqlDataSource output to a gridview. If I search for 123 it returns the record with ID 123, as it should. If I search for aaa it returns the error. Anyone have any idea why??? The database looks like so:
id int (primary key / identity)
struser nvarchar(50)
The SQL statement looks like this:
SELECT id, struser
FROM ticket
WHERE (id = #id) OR (struser = #struser)

You can use a case statement, below assumes you have no id value of -1:
SELECT id, struser FROM ticket WHERE (id = CASE ISNUMERIC(#id) WHEN 1 THEN CONVERT(int,#id) ELSE -1 END) OR (struser = #struser)

Try
SELECT id, struser
FROM ticket
WHERE (CONVERT(VARCHAR,id) = #id ) OR (struser = #struser)

try casting it to varchar but I think it will not use index anymore.
WHERE (CAST(id AS VARCHAR(20)) = #id)

Read last Inserted row in Sql according to its Time stamp

sql has a Table called emp.
emp(emp_id int IDENTITY primary key, EmployeeName varchar(50),.......)
I want to Insert a record to above table. Here is my code in asp.net.
DBconnection dbcon = new DBconnection();
string query = "insert into emp values('" + TextBox_EmpName.Text + "','" + ....);
int no1 = dbcon.insertQuery(query);
I have another table called emp-relation
emp-relation(emp_id int primary key, count int, ....)
-- foreign key (emp_id)references emp(emp_id)
My problem is when I inserting the emp row ,I dont know what is the emp_id since it created by auto. And when I am going to insert to emp-relation , I want to get emp-id since it is the foreign key.
How can I do this? Is there any way to read last Insert row in Sql according to Time stamp or some thing? I believe that records are not sorted according to inserted timestamp in nature. please help me.

There's bascally two ways. The first way is to return the new ID from the first insert query:
insert into emp values(...)
select scope_identity() as NewID
The second way is to lookup the first row when you insert into the relation table:
insert emp-relation
(emp_idm, ...)
select emp_id
, ...
from emp
where emp_name = #EmpName
You have to pass in enough columns to make the reference unique.

Order query and OrderDetail

Order Table
OrderId
CustomerId
Date
Total
OrderDetails
OrderDetailId
OrderId
ProductId
Quantity
UnitPrice
i am using Order query
INSERT INTO dbo.Orders (CustomerId, Date, Total)
VALUES (1, 2011-04-10, 50000);
I am executing OrderDetail query many times.
DECLARE #OrderID int
SET #OrderID = SCOPE_IDENTITY()
INSERT INTO dbo.OrderDetail (OrderId,ProductDescriptionId,Quantity,UnitPrice)
VALUES (#OrderID,11,2,50000)
The problem here is that the value of #OrderID changes, and no longer matches the foreign key from the Orders table after i execute this query for the second time. so what should i do to fix this?

I. You have to use the same connection to:
Insert the Order:
INSERT INTO dbo.Orders (CustomerId, Date, Total)
VALUES (1, 2011-04-10, 50000);
Retrieve SCOPE_IDENTITY() and store it in some place in your code (you havn't supplied the .NET code, so I could give you more precise advice) :
command.CommandText = "SELECT SCOPE_IDENTITY()";
int lastOrderId = (int)command.ExecuteScalar();
II. Then (same connection or not):
Insert OrderDetails using:
-- concatenation:
"INSERT INTO dbo.OrderDetail (OrderId,ProductDescriptionId,Quantity,UnitPrice)
VALUES ('" + lastOrderId.ToString() + "',11,2,50000)"
-- or Parameters:
command.Parameters.Add("#OrderID", SqlDbType.Int);
command.Parameters("#OrderID").Value = lastOrderId;
INSERT INTO dbo.OrderDetail (OrderId,ProductDescriptionId,Quantity,UnitPrice)
VALUES (#OrderID,11,2,50000)

If your order detail as an identity field, then when you call INSERT INTO dbo.OrderDetail it's going to change SCOPE_IDENTITY. You'd need to set or #OrderID once for each Order entry and not call SCOPE_IDENTITY again until you've added another column to your Orders table.
--Run this once per order
INSERT INTO dbo.Orders (CustomerId, Date, Total)
VALUES (1, 2011-04-10, 50000);
--Run this once per order
DECLARE #OrderID int
SET #OrderID = SCOPE_IDENTITY()
--Run this once per orderdetail
INSERT INTO dbo.OrderDetail (OrderId,ProductDescriptionId,Quantity,UnitPrice)
VALUES (#OrderID,11,2,50000)

Resources