I have tried to locate the XML package for the above version of R with no success. I have looked on http://www.omegahat.org/ and it goes to a 404 page: http://www.omegahat.org/XML
Basically I am trying to install the RGoogleAnalytics package and that also fails, though i suspect that is because I don't have the XML installed. Does anyone know where I can get the XML package from?
Thanks
Peter
After a bit more searching, I came across this guide, which gives some good hints as to installing RGoogleAnalytics. Here's a slight modification, in case the XML library really can't be found at omegahat:
The last part in step 2 asks you to install the XML library from omegahat. I could successfully install the package from CRAN, however. So simply install.packages("XML") at the R prompt should work.
Next, the guide says that you need to download the RGoogleAnalytics source package directly from Google at the following URL.
Once that was downloaded (and after I installed the RCurl package), I could install RGoogleAnalytics successfully.
For instructions on installing R packages from source, you could see this article on r-bloggers.com or the appropriate section of the R Installation and Admin documentation
EDIT:
The Google Code page for RGoogleAnalytics does suggest using the XML package from omegahat, and it does look like that package is a different version from the one on CRAN. I could successfully install the omegahat version using R 2.15.1 with the following from the R prompt
install.packages("XML",repos="http://www.omegahat.org/R",type="source")
EDIT2: installing RGA from source
If everything is prepared according to the RGA instructions on the Google page, you should be ready to install the RGA package from source with the following line (I had to add --no-multiarch, since XML wasn't installed for 32-bit architecture):
install.packages("~/Downloads/RGoogleAnalytics_1.1.tar.gz",
repos=NULL,type="source",INSTALL_opts="--no-multiarch")
I think you might want:
http://www.omegahat.org/RSXML/
Although it is equally possible that you should be using the XML package from CRAN. I just updated my older version with the current binary install (for R 2.14.2 on MacOS 10.5.8).
Related
Downloaded package from below URL.
Attempted to install using below command; response shown.
library(dalton.rqi,lib.loc='/home/X/Desktop/')
Error: package ‘dalton.rqi’ was built before R 3.0.0: please re-install it
https://my.clevelandclinic.org/departments/anesthesiology/depts/outcomes-research/risk-quantification
It appears this is a compiled package that maybe I don't have the source for? Is there a way to force install of the package? I'm unable to install using Rstudio GUI in its current form as a zip. Tried repackaging to tar.gz has Rstudio was looking for and also had a non-zero exit status error.
Any ideas?
I'm afraid this can't be achieved directly. The error message says it well: to use a package in R it needs to be built on an R version matching yours.
I can suggest two ways to move forward:
Contact the authors, ask for the R sources (it is somewhat surprising they did not make them available in the first place), and build the package yourself.
Downgrade your R version as far back as needed to match the one this pre-built package used.
I want to install a package that is listed in https://cran.r-project.org/web/packages/available_packages_by_name.html as available in CRAN, but when I check in R the install packages menu or the available.packages() command, I can't see the package there.
Do I need to do something different to install those packages? Why aren't those packages available?
The packages I'm interested on are WikipediR ( https://cran.r-project.org/web/packages/WikipediR/index.html ), WikidataR and WikipediaR.
If it matters, I'm using R 2.15.0 in Windows XP.
See the documentation for ?available.packages...
By default, the return value includes only packages whose version and
OS requirements are met by the running version of R, and only gives
information on the latest versions of packages.
In other words... your R 2.15 is likely too old for the package you are looking to download.
You can try to download the package source manually add the package to the package library usually found somewhere like "win-library/2.15/" but like Cory mentioned it is likely that the older version of R does not support the package build.
The advice given so far is a bit incomplete although I do agree you need to update your R version if you want to use these packages. Looks like they don't need compilation so you might have been able to either install from a local copy or drop R code in, but critically they depend on httr which requires R 3.0.0 or above. They were released only relatively recently, so there will be no Windows binaries from back in 2012. (Your copy of R is from 30-Mar-2012.) Look in the DESCRIPTION file which is presented in a nice web format at the CRAN/package listing:
https://cran.r-project.org/web/packages/WikidataR/index.html
Imports: httr, jsonlite, WikipediR
Suggests: testthat, knitr, pageviews
# only one version of these two
https://cran.r-project.org/src/contrib/Archive/WikidataR/WikidataR_1.0.0.tar.gz
https://cran.r-project.org/src/contrib/Archive/WikipediaR/WikipediaR_1.0.tar.gz
# pick one of these
https://cran.r-project.org/src/contrib/Archive/WikipediR/
I'm trying to install the 'yaml' and 'stringi' packages in R-Studio, and it keeps giving me these errors:
> install.packages("stringi")
Package which is only available in source form, and may need compilation of C/C++/Fortran: ‘stringi’
These will not be installed
or
> install.packages('yaml')
Package which is only available in source form, and may need compilation of C/C++/Fortran: ‘yaml’
These will not be installed
How can I get these to install properly?
The error is due to R being unable to find a binary version of the package on CRAN, instead only finding a source version of the package and your Windows installation being unable to compile it. Usually this doesn't occur, but in this case was caused by the (temporary) outage of some of the mirrors at CRAN. If you type:
> getOption('repos')
CRAN CRANextra
"http://cran.rstudio.com" "http://www.stats.ox.ac.uk/pub/RWin"
attr(,"RStudio")
[1] TRUE
You will see that R uses "http://cran.rstudio.com" by default to look for a package to download. If you see the cran mirrors web page you can see at the top that "http://cran.rstudio.com" actually redirects you to different servers world wide (I assume according to the geo location).
When I had the above issue, I solved it by manually changing the repo to one of the urls in the link provided. I suggest you use a different country (or even continent) in case you receive the above error.
I provide below some of the urls in case the link above changes:
Brazil http://nbcgib.uesc.br/mirrors/cran/
Italy http://cran.mirror.garr.it/mirrors/CRAN/
Japan http://cran.ism.ac.jp/
South Africa http://r.adu.org.za/
USA https://cran.cnr.Berkeley.edu/
You need to run the function install.packages as follows:
install.packages('<package_name>', repo='http://nbcgib.uesc.br/mirrors/cran/')
#or any other url from the list or link
One of them should then work to install a binary from an alternative mirror.
You need to install RTools to build packages like this (i.e., a source package rather than a binary). After you install Rtools, then try again to install.packages("ggplot2") and R will prompt you with:
Do you want to attempt to install these from source?
y/n:
(see the picture below)
You need to answer y and it will try to compile the package so it can be installed.
Struggled with this issue today, solved it for now by first downloading the windows binary and then installing e.g.
install.packages("https://cran.r-project.org/bin/windows/contrib/3.3/stringi_1.1.1.zip", repos =NULL)
Just go to https://cran.r-project.org/ and then R Binaries/Windows/contrib and copy the url as argument to install.packages()
Install the package from a zip file - downloadable from the r-project website.
In basic R
go to Packages
Install packages from local files.
In RStudio
go to Packages
Install packages
Install from Package Archive File.
I had this issue when using an out-of-date version of R, so no binaries were available. The simple solution was to update my version of R.
Anything worked for me, until I found out my computer had an old version of R installed. Uninstalling everything and installing the newest R version worked!
I had to download the latest version of Rtools:
Go into the downloads folder and double click it to install it.
Close and reopen any R session.
Now packages should install like normal.
However, if you still have trouble, try installing the package from source (using type="source")
Like this:
install.packages("dplyr", type="source")
In trying to install package "RevoScaleR", I get the following error. I have tried installing this package with various versions of R but get the same error every time. Does anyone have any idea why?
install.packages("RevoScaleR")
Warning in install.packages :
package ‘RevoScaleR’ is not available (for R version 3.1.2)
Any help is appreciated.
Just to update this post,to install the RevoScaleR package you need to install Microsoft R client, see here for details:
https://www.blue-granite.com/tutorials/sql-server-r-services
R Client includes the ScaleR (rx[…]) functions in the RevoScaleR package. I don't believe this package is open source so isn't available on cran, install.packages() therefore won't work.
The RevoScaleR package is only available if you install the Microsoft R Client or if you use Microsoft RStudio Server via Azure. After you install this you don't need to do install.packages("RevoScaleR") for it is already installed.
R Studio will automatically have the R version [64-bit] C:\Program Files\Microsoft\R Client\R_SERVER under "Global options"
The link below gives more detail information about Microsoft R client. Once you install Ms R client and update the R-studio path to the R client you don't need to install 'RevoScaleR' anymore, it comes pre-installed with Microsoft R client. Read the link fore more.
https://msdn.microsoft.com/en-us/microsoft-r/r-client-get-started
I am not sure what R version you are currently using but the latest stable version is 3.1.2. If the package installation warning is telling that the package you're trying to install is not available, that basically means that the package developer has not yet made a version of the package that is compatible with the R version you're currently running.
If you really need to use this package (if your work heavily depends on it and you are on some kind of deadline) I would advise to install an earlier version of R (like 3.1.1 or 3.1) and do your work with it.
I would also suggest that you reach out to Revolution Analytics, as suggested by Andrie.
Thanks!
You just have to set the propper CRAN repos:
options("repos" = c(CRAN = "https://mran.microsoft.com/"))
and then
install.packages("RevoScaleR")
will run properly.
I was trying to run code that required the R packages ‘pkgDepTools’ and ‘Rgraphviz’. I received error messages saying that neither package is available for R version 2.15.0.
A Google search turned up the following webpage RPM Pbone that seems to have the packages:
http://rpm.pbone.net/index.php3/stat/4/idpl/17802118/dir/mandrake_other/com/R-pkgDepTools-1.20.0-1-mdv2012.0.i586.rpm.html
and
http://rpm.pbone.net/index.php3/stat/4/idpl/17802080/dir/mandrake_other/com/R-Rgraphviz-1.32.0-2-mdv2012.0.i586.rpm.html
However, the files have an *.rpm extension rather than the *.tar.gz or *.zip extensions I am used to.
I am using Windows 7 and R version 2.15.0. Can I install an R package from an *.rpm file?
From Wikipedia *.rpm seems like maybe it is more for Linux:
http://en.wikipedia.org/wiki/RPM_Package_Manager
Regarding other possible solutions, I have found several earlier posts here with similar questions about installing R packages that are not available for the most recent version of R:
Bivariate Poisson Regression in R?
Package ‘GeneR’ is not available
R Venn Diagram package Venerable unavailable - alternative package?
I have installed the latest version of Rtools and the package 'devtools'. Although I know nothing about them.
There is an archived version of 'Rgraphviz' here:
http://cran.r-project.org/src/contrib/Archive/Rgraphviz/
but I cannot locate an archived version of 'pkgDepTools'.
If I can install the packages on a Windows machine using the above *.rpm files could someone please provide instructions?
If I must use Rtools to build them I might ask more questions because the instructions at the link below are challenging for me:
http://cran.r-project.org/doc/manuals/R-admin.html#Building-from-source
To be completely transparent I am hoping someone might build them for me, if that is possible. Although I recognize the experience and knowledge gained from doing it myself would probably pay off in the long run.
Thank you for any advice.
pkgDepTools and Rgraphviz are BioConductor R packages not ones hosted on CRAN. Unless you configure your R to download packages from those repos, R will report that they are not available; it can only install from repos it has been configured to install from.
To install those BioConductor packages a lite installation method is provided:
source("http://bioconductor.org/biocLite.R")
biocLite(c("pkgDepTools", "Rgraphviz"))
Further details are provided on the Install page of the BioConductor website
In general you can't use rpm packages on Windows; rpm's are the equivalent of a binary package for Linux. Any C/C++/Fortran/etc code will have been compiled for Linux not Windows. If a package really isn't available for your version of R then check if there is a reason stated on CRAN (usually Windows binaries take a few days longer to produce or there may be requirements for software not available on the CRAN Windows build machines). You can try the WinBuilder service run by Uwe Ligges to build Windows Binaries of packages for you, but if the package was on CRAN and now isn't that suggests it no longer works with current R and can not be built.
In general try a wider search for packages; the first hit in my Google search results under the search string "pkgDepTools" is the Bioconductor page for the package which includes a link to the Windows binary and instructions on how to install the package from within R.
I think this merits an answer rather than a comment.
A gentleman at Bioconductor helped me get Rgraphviz installed. The primary problem was that the version of Rgraphviz I had downloaded only seems to work with the 32-bit version of R and I was running a 64-bit version of R. I was able to install Rgraphviz in the 32-bit version of R.
I had also made an error or two in the PATH statement during some of my attempts to install Rgraphviz. However, the post above in my second comment provides the instructions for installation.
You just, it seems, cannot install the normal download version of Rgraphviz in the 64-bit version of R.
I think many of our emails back and forth are now posted on the Bioconductor forum.
I might edit this answer with more detailed instructions in the next 24-hours.