PyQt/Qt: How to stretch an image in Qlabel widget? - qt

I want to display an image in my app. I use QtDesigner to design UI, then use pyqt to coding. The problem is the image that will be shown is lager than the widget size on the UI. I refer to offical demo:
QT - Widget Image Viewer Demo
add imagelabel and scrollArea, code as follows:
---- UI init ----
self.label = QtGui.QLabel(self.centralwidget)
self.label.setGeometry(QtCore.QRect(40, 140, 361, 511))
self.label.setSizePolicy(QtGui.QSizePolicy.Preferred,QtGui.QSizePolicy.Preferred)
self.label.setObjectName(_fromUtf8("label"))
self.scrollArea = QtGui.QScrollArea(self.centralwidget)
self.scrollArea.setGeometry(QtCore.QRect(40, 140, 361, 511))
self.scrollArea.setWidget(self.label)
self.scrollArea.setObjectName(_fromUtf8("scrollArea"))
---- function ----
filename = "./Penguins.jpg"
image = QtGui.QImage(filename)
pp = QtGui.QPixmap.fromImage(image)
lbl = QtGui.QLabel(self.label)
lbl.setPixmap(pp)
self.scrollArea.setWidgetResizable(True)
lbl.show()
but it doesn't stretch the image, even no scroll bar appear!

You need to call self.label.setScaledContents(true);. So that QLabel will resize itself to the size of pixmap/image and scroll-bar will get visible. See this documentation.

The default implementation of QLabel::setScaledContents wasn't working for me, since it didn't allow me to keep the aspect ratio when the images where larger then the label's
maximum sizes.
This little helper will scale the image down to fit into a label's maximum size if needed (but not up), always keeping the aspect ratio:
/**
* Fill a QLabel widget with an image file, respecting the widget's maximum sizes,
* while scaling the image down if needed (but not up), and keeping the aspect ratio
* Returns false if image loading failed
****************************************************************************/
static bool SetLabelImage(QLabel *label, QString imageFileName)
{
QPixmap pixmap(imageFileName);
if (pixmap.isNull()) return false;
int w = std::min(pixmap.width(), label->maximumWidth());
int h = std::min(pixmap.height(), label->maximumHeight());
pixmap = pixmap.scaled(QSize(w, h), Qt::KeepAspectRatio, Qt::SmoothTransformation);
label->setPixmap(pixmap);
return true;
}

I do not use PyQt but the QtPixmap control has scaled() functions. You can resize the image before put in the label:
scaled()
scaledToHeight()
scaledToWidth()
This is the sample code I use in C++ to resize an image to the QLabel size:
imatge.load("sprite.png");
QPixmap imatge2 = imatge.scaled(ui->label->width(),ui->label->height());

Related

How to size the texture to occupy only a portion of a QQuickItem UI

I have overriden updatePaintNode in the following way to draw an OpenGL texture on a QQuickItem derived class called MyQQuickItem here.
QSGNode *MyQQuickItem::updatePaintNode(QSGNode * oldNode, QQuickItem::UpdatePaintNodeData * /*updatePaintNodeData*/)
{
QSGSimpleTextureNode * textureNode = static_cast<QSGSimpleTextureNode *>(oldNode);
if (!textureNode) {
textureNode = new QSGSimpleTextureNode();
}
QSize size(800, 800);
// myTextureId is a GLuint here
textureNode.reset(window()->createTextureFromId(myTextureId, size));
textureNode->setTexture(my_texture);
textureNode->markDirty(QSGBasicGeometryNode::DirtyMaterial);
QSizeF myiewport = boundingRect().size();
qreal xOffset = 0;
qreal yOffset = 10;
textureNode->setRect(xOffset, yOffset, myViewport.width(), myViewport.height());
return textureNode;
}
This renders the texture content well but covers the whole of my MyQQuickItem UI.
How can reduce the bottom margin of the texture to say fit 80% of the height of MyQQuickItem.
I want to render the texture to a portion of MyQQuickItem & leave the rest blank or black? Is that possible within updatePaintNode.
Note that the texture size is not the UI window size here. My texture size is 800 by 800. Whereas the UI window size is different and depends on the screen.
I found the answer to this:
Changing myViewport.height() gives the required end in Y direction one wishes to set. Similarly, changing myViewport.width() gives the required end in X direction one wishes to set.
4 parameters in TextureNode's setRect can stretch & fit the texture in the way one wishes within a portion of the QQuickItem.

How can I wrap text in QGraphicsItem?

1) How can I wrap text in a QGraphicsTextItem to fit a fixed rectangle, with width and height ?
Right now I am experimenting with creating a text, getting its bounding rectangle, and resizing it to fit the box - but I can't get wrapping.
class TTT: public QGraphicsTextItem {
TTT() {
{
setPlainText("abcd");
qreal x = m_itemSize.width()/boundingRect().width();
qreal y = m_itemSize.height()/boundingRect().height();
scale(x, y);
}
void paint(QPainter* painter, const QStyleOptionGraphicsItem* option, QWidget* widget) {
// experiment with clip regions
// text gets covered by hole in clip
QRegion r0(boundingRect().toRect());
QRegion r1(QRect(5, 5, 10, 10), QRegion::Ellipse);
QRegion r2 = r0.subtracted(r1);
painter->setClipRegion(r2);
painter->setBrush(Qt::yellow);
painter->drawRect(boundingRect());
QGraphicsTextItem::paint(painter, option, widget);
}
}
What makes wrapping happen, how can I trigger it ?
Right now, as I keep typing, the box is automatically expanding.
2) Is it possible to wrap the text in a QGraphicsItem / QGraphicTextItem subclass in a shape that is not a rectangle ?
(Something like in the image above)
I tried to use clipRegion, see code above, but I guess it is not the right way to go, clipping cuts the text but did not wrap.
Maybe it would... If I could figure out how to wrap text in the first place ?
Qt 4.8
You did not specify Qt version but try:
void QGraphicsTextItem::setTextWidth(qreal width)
Sets the preferred width for the item's text. If the actual text is wider than >the specified width then it will be broken into multiple lines.
If width is set to -1 then the text will not be broken into multiple lines >unless it is enforced through an explicit line break or a new paragraph.
The default value is -1.
In answer to 1) I'd opt not to use the QGraphicsTextItem, but draw the text directly in your QGraphicsItem's paint function using the drawText overloaded function, which takes a QTextOption parameter.
Using this, you can set the WrapMode, for example, with a call to
QTextOption::setWrapMode(QTextOption:: WordWrap)
As for 2) with a non-rectangular shape, I don't think Qt will do this for you.
Doing it yourself you can use QFontMetrics, to work out just how much text would fit in each line, depending upon where it lies within its bounding item.
Alternatively, you could adapt the concept of a text-to-path method.

How can an image be cropped based on a set scale of random image?

Working on allowing the upload of images which can range in a variety of size, then allowing to crop a predefined area of the image for a thumbnail.
The thumbnail size is predefined to 150x150. Using the Jcrop.js tool to select a section of the image.
Problem:
When displaying the uploaded image in a smaller size than the original image by implementing set height/width on the image rendered, then there is a scale factor that comes into play when selecting an area to crop.
You either have to scale down the cropping area proportionately or you have to scale the image in relation to the actual image's size in comparison to its displayed size.
Question:
How do I figure out the scale of the browser displayed image vs. original image? I am currently using the following code to save the image, but how would I take into consideration the scaling?
public static Image CropImage(Image originalImage, int x, int y, int width, int height)
{
var bmp = new Bitmap(width, height);
bmp.SetResolution(originalImage.HorizontalResolution, originalImage.VerticalResolution);
using (var graphic = Graphics.FromImage(bmp))
{
graphic.SmoothingMode = SmoothingMode.AntiAlias;
graphic.InterpolationMode = InterpolationMode.HighQualityBicubic;
graphic.PixelOffsetMode = PixelOffsetMode.HighSpeed;
graphic.DrawImage(originalImage, new Rectangle(0, 0, width, height), x, y, width, height, GraphicsUnit.Pixel);
return bmp;
}
}
Bonus Question:
Another problem I discovered, is that there seems to be no efficient way to transfer the original file's ImageFormat when creating a new Bitmap which creates a ImageFormatMemoryBMP and when you attempt to call Bitmap.Save(memorystream, original rawformat) it will blow up. And bitmap RawFormat has no setter.
So how can you set the format on a new bitmap?
I think perhaps that this problem is solved purely on the front end, no need to use any server side for this.
Jcrop has a built in scale factor handler.
http://deepliquid.com/content/Jcrop_Sizing_Issues.html
Now you can use this in two ways, as I understand it. Either to 'resize' the image for you on the front end using 'box sizing', or you can tell it the 'truesize' of the image and it will work out the scale factor and handle the coordinates for you on it's own.
Box sizing
$('#cropbox').Jcrop({ boxWidth: 450, boxHeight: 400 });
True Size
$.Jcrop('#cropbox',{ trueSize: [500,370] });
Using the true size method you will need to invoke jcrop using the api method:
http://deepliquid.com/content/Jcrop_API.html#API_Invocation_Method
var jcrop_api,
options = { trueSize: [500,370] };
$('#target').Jcrop(options,function(){
jcrop_api = this;
});
Good luck!

QLabel color and separateur

IplImage *img_lb = cvCloneImage(img_orig);
QImage qt_img = IplImage2QImage(img_lb);
QLabel label_3;
// display on label
ui->label_3->setPixmap(QPixmap::fromImage(qt_img));
// resize the label to fit the image
ui->label_3->resize(ui->label_3->pixmap()->size());
// ui->label_3->show();
`hi i use Qt creator i would like to play video in the size of declared size and not his size ,someone can help?this is my code
If you want your Image scaled to you Label size, Use
ui->label_3->setPixmap(QPixmap::fromImage(qt_img).scaled(ui->label_3->size(), Qt::IgnoreAspectRatio));
This would make your pixmap perfectly fit to the Label while ignoring the aspect ratio. For more look here.

FlashBuilder 4.5 :: Render Text without lifecycle for upsampling

I need to find a way to "upsample" text from 72dpi (screen) to 300dpi (print) for rendered client generated text. This is a true WYSIWYG application and we're expecting a ton of traffic so client side rendering is a requirement. Our application has several fonts, font sizes, colors, alignments the user can modify in a textarea. The question is how to convert 72dpi to 300dpi. We have the editior complete, we just need to make 300dpi versions of the textarea.
MY IDEA
1) Get textarea and increase the height, width, and font size by 300/72. (if ints are needed on font size I may need to increase the font then down-sample to the height/width)
2) use BitmapUtil.getSnapshot on the textarea to get a rendered version of the text
THE QUESTION
How can I render text inside of a textarea without the component lifecycle? Imagine:
var textArea:TextArea = new TextArea();
textArea.text = "This is a test";
var bmd:BitmapData = textArea.render();
Like Flextras said, width/height has nothing to do with DPI, unless you actually zoom into the application by 4.16X. If your application all has vector based graphics, it shouldn't be a problem. Plus, the concept of DPI is lost in any web application until you're trying to save/print a bitmap.
It's definitely possible, but you'll have to figure it on your own.
To ask a question another way, it is possible to create a TextArea in
memory which I can use the BitmapUtil.getSnapshot() function to
generate a BitmapData object
Technically, all components are in memory. What you want to do, I believe, is render a component without adding it to a container.
We do exactly this for the watermark on Flextras components. Conceptually we created a method to render the instance; like this:
public function render(argInheritingStyles : Object):void{
this.createChildren();
this.childrenCreated();
this.initializationComplete();
this.inheritingStyles = argInheritingStyles;
this.commitProperties();
this.measure();
this.height = this.measuredHeight;
this.width = this.measuredWidth;
this.updateDisplayList(this.unscaledWidth,this.unscaledHeight);
}
The method must be explicitly called. Then you can use the 'standard' procedure for turning the component into a bitmap. I think we use a Label; but the same approach should work on any given component.
Here is the final method I used to solve the problem of creating a printable version of the text and style of a Spark TextArea component. I ended up placing the custom component TextAreaRenderer (see below) in the MXML and setting the visibility to false. Then using the reference to this component to process any text field (renderObject) and get back a BitmapData object.
public class TextAreaRenderer extends TextArea implements IAssetRenderer
{
public function render(renderObject:Object, dpi:int = 300):BitmapData{
// CAST THE OBJECT
//.................
var userTextArea:TextArea = TextArea(renderObject);
// SCALE IS THE DIVISION OF THE NEW DPI OVER THE SCREEN DPI 72
//............................................................
var scale:Number = dpi / 72;
// COPY THE USER'S TEXT AREA INTO THE OFFSCREEN TEXT AREA
//.......................................................
this.text = userTextArea.text; // the actual text
this.height = Math.floor(userTextArea.height * scale); // scaled height
this.width = Math.floor(userTextArea.width * scale); // scaled width
// GET THE LAYOUT FORMATS AND COPY TO OFFSCREEN
// - the user's format = userTextAreaLayoutFormat
// - the hidden format = thisLayoutFormat
//...............................................
var editableLayoutProperties:Array = ['fontSize', 'fontFamily', 'fontWeight', 'fontStyle', 'textAlign', 'textDecoration', 'color']
userTextArea.selectAll();
var userTextAreaLayoutFormat:TextLayoutFormat = userTextArea.getFormatOfRange();
this.selectAll();
var thisLayoutFormat:TextLayoutFormat = this.getFormatOfRange();
for each(var prop:String in editableLayoutProperties){
thisLayoutFormat[prop] = userTextAreaLayoutFormat[prop];
}
// SCALE THE FONT SIZE
//....................
thisLayoutFormat.fontSize = thisLayoutFormat.fontSize * scale;
// SET THE FORMAT BACK IN THE TEXT BOX
//...................................
this.setFormatOfRange(thisLayoutFormat);
// REDRAW THE OFFSCREEN
// RETURN THE BITMAP DATA
//.......................
this.validateNow();
return BitmapUtil.getSnapshot(this);
}
}
Then calling the TextAreaRenderer after the text area is changed to get a scaled up bitmap.
// COPY THE DATA INTO THE OFFSCREEN COMPONENT
//............................................
var renderableComponent:IAssetRenderer = view.offScreenTextArea;
return renderableComponent.render(userTextArea, 300);
Thanks to the advice from www.Flextras.com for working through the issue with me.

Resources