I am trying to modify the WMSPickingList_OrderPick Report in Dynamics AX 2009.
I am attempting to move the InventDim group onto the same line as the actual Item Line, as it currently prints underneath.
I have tried manually moving the fields, in this case no data appears.
I have tried switching the parameters so that the item dimensions appear after or a part of the item number, in this case it still appears below.
I have also attemped to simply pick up the values in the Fetch statement and pass them to variables, I can see the values being picked up but on returning them in a display method no data appears?
Many thanks for your help in advance.
Go to Accounts receivables > Setups > Forms > Forms Setup
In the "General" tab > "Print item dimensions" group, Select the "Print item dimensions" as "After item number"
I am assuming it is currently set to "Under item line"
The problem with WMSPickingList_OrderPick report is the width of the design, the design doesnt have enough width to print the Inventory Dimensions, they dont appear when u put them in the same line because the columns overlap.
However, one very clean solution can be to use a Display method as datasource for the Item ID (i.e item number) and in that display method just append the dimension.
Related
Im trying to write queries on Azure Workbook so that I can run queries on our logs, which would allow me to drill down and view exactly what the exception message is. While doing so, when I execute a KQL query, on the workbooks, the column values are truncated as shown in picture. I want to be able to see the full error stack in order to troubleshoot the issue. Now I can get the operation_Id from here and then run it in Log Analytics to view full details, but I would like to view everything I need on this single page within Azure WorkBook. Clicking on the column doesn't expand it.
You cannot expand a particular column when you execute a kql query on the workbooks.
If you change the visualization to Text you will be able to see the complete stack error message as show in the below image
There are many ways to do something like this in workbooks, but the grid we use doesn't have the ability to expand a single cell like the logs view does.
As another answer states, you could use the "text" visualization to visualize just one cell (0,0) as a text block, but that only works for once cell queries.
or, in the grid settings you can set the column renderer to be a link for those columns, and have that link open the "cell details" view. that will open up a side pane that shows all the content of the cell in a popup view
or you could pick the "generic details" option which will open a side popup showing the values of all the columns in that row)
or, you can go into advanced settings, and enable the option to export parameters when a row is selected. you can then set it to export specific columns as specific named parameters, and use those parameters downstream to see values in something like a markdown text item in the workbook, or in a subsequent query.
there are examples of things like that documented here: https://github.com/microsoft/Application-Insights-Workbooks/blob/master/Documentation/Interactivity.md
We are using Pentaho Report Designer, after publish the report, We are getting some empty rows with data rows in report. We don't want that empty rows.
Please give the solution for remove empty rows in report.
Use the expression formula (green plus sign) for "visible" property on the elements you need, to define the condition under it the components will be visible, so elements that satisfy the condition on expression formula will be visible or not.
You can use it at band level, so, if you wanna hide an entire band (it can be de details band for a specific row) e.g.:
Click on the band you wanna hide under certain condition
Once the element is selected, click on the green plus sign, and set the expression formula desired to make the band visible e.g: =IF(NA([possible_empty_column]);TRUE();FALSE())
voila!
I am fairly new to using BI Publisher (MS Word plugin) with PeopleSoft. I have a payment statement that I am adding some data elements to and I have noticed that with the Invoice Number field in some cases the number/test string is longer and it pushes the column next to it (Gross Amt) down to the row below it, as illustrated below.
The Invoice number is "Final set up testing 1099 2" and the Gross Amt is "1,000.00", however the length of the Invoice Nbr has pushed the Gross Amt to be below it.
Example:
This is how I have the template (RTF file) setup as (both fields highlighted):
Any ideas how I can either give the Invoice Nbr field a fixed width, or somehow prevent the Gross Amt from pushing down to the next line below?
Based on that behavior I am wondering whether the content area is a table. Here is something to try... click on one of those fields and see if you get the "Table Tools" menu in the MSWord ribbon bar. If you do then on the Layout tab select "View Gridlines". That will help to see how the content area is built and how the elements are related.
If the fields are in a table then you can modify the table properties to better control the column and/or cell sizes. Right-click on the values, select "Table Properties." On the Table tab select Options then deselect "Automatically resize to fit contents." Then on the Column tab and Cell tabs you can set column sizes. The Cell, Options allows you to control text wrapping. You would probably want to set a column width for Invoice Nbr, then turn on text wrapping.
If those fields are the same column you may need to split them. If it is not a table then you may need to make one or try some other formatting options in Word.
I would like to have the user enter order items on my order form as a table where they input the Qty and Prod #. I've not programmed with that type of field so a blank line would initially display for a new order. They would type a Qty and an item number in the fields and hit enter. When they hit enter from either field, what do I program to check the validity of the two fields. Plus I need the item number to be a drop down/type ahead field. Does anyone have an example of this type of thing they could send me? It would be looking at a view in the product catalog db. Also, after they enter an item to order, that "doc" should get stored/saved and a new blank line should open up.
What type of control do I need to use and should these items be stored in their own form or on the main order document? Could use some guidance here. Thanks.
The question you have is a little broad but I will make a couple suggestions if I can.
You have the main order doc. Then a repeat control with each item. Filter each item by a uniqueID that allows you to join the main doc to the child docs. Each item should be a separate document. You then need to make the items in the repeat control editable.
There is a lot of things going on here and I think you need to get started somewhere. I think the first step is to do a repeat control with response documents.Xpages, Inherited documents in view panel by using #Unique
I don't know if its possible or not, but thought I'd ask. Many times reports need data grouping to have anchored to the bottom of the report some summary information, such as invoices. You don't want the totals shifting UPwards based on only 2 detail lines vs another with 20. I've tried working with using the Tablix bound to the data source for the output but couldn't get it quite right... It would either shift up, or force break and appear at top of following page.
So, if anyone has some ideas to help resolve that, that too would be great.
My second approach was to just use a simple report page footer. However, the overall "Report" page is not technically "BOUND" to any datasource. So, if I put a textbox in the footer and want it to show something, I can't pick "the most recent row from the datasource associated with the Tablix", it always requires an aggregate, such as
=First(Fields!SomeField.Value, "SomeDataSource" )
=Sum( ...
=Last( ...
etc...
I just want it to have whatever was the most recent... so I tried to use report variables to create one and was thinking to have it get updated per row being processed, so it always had whatever the "latest" value was and I could just dump that value at the bottom of the report.
Any suggestions to either would be great. Thanks.
I know this is an old question, but I had a very similar problem and came up with a unique solution. I had a statement that needed to have the payment slip print at the bottom of the page even if the statement line items wrapped over to another page. I solved it by:
Making all rows in the report a uniform height.
Calculating how many rows were required to fill the page (minus the height of my payment slip.
Getting the number of line items in the statement.
Calculating the remaining number of rows needed to push my payment slip to the bottom of the page.
Adding a sub-report with the calculated number of blank rows to pad out the necessary space between the line items and the payment slip.
The advantage of that approach was that I could generate bills for multiple customers, and since the padding is part of the group it would be customized for each customer's bill and bottom-justify the pay slip for each of them.
You can use a similar approach to push your "footer" info to the bottom of your page. Since it is still inside of your data group you'll have access to the data values you need as well.
In the footer you can refer to report item from report body, like this:
=ReportItems!myFooterValueTextBox.Value
The catch is that you can refer to only one report item in your footer, so you may need to add invisible footer row in your table and concatenate all your totals into one cell (myFooterValueTextBox) in that row:
=First(Fields!SomeField.Value, "SomeDataSource") + "|" +
Sum(...) + "|" + .... +
Last(...)
I used pipe as deliminator in my example, so then in the footer, I would split the string and place values in appropriate containers, like this:
=Split(ReportItems!myFooterValueTextBox.Value,"|")(0)