I have setup a application in my IIS7 that uses .NET Framework 4.0 (runned by NetworkService) but when browsing the site I get this:
Access is denied.
Description: An error occurred while accessing the resources required to serve this request. You might not have permission to view the requested resources.
Error message 401.3: You do not have permission to view this directory or page using the credentials you supplied (access denied due to Access Control Lists). Ask the Web server's administrator to give you access to*
I have tried to give NetworkService full permission on the folder that holds the website (the one that the web application in IIS is pointing against) but I do still get the access denied?
Why?
I gave access to "IIS_IUser" but instead it should be "IUSR". That solved the problem.
For me, nothing worked except the following, which solved the problem: open IIS, select the site, open Authentication (in the IIS section), right click Anonymous Authentication and select Edit, select Application Pool Identity.
I had the same problem, I enabled "Anonymous Authentication" but it still did not work.
So I also ENABLED "Forms Authentication" Then it worked without any problems.
OS : Windows 7 & IIS 7
If you still have permission denied after adding IUSR & NETWORK SERVICE.
Add also IIS_WPG. The addition of this last user solved my problem.
For people who can't find those users:
when you're trying to add a user in security of the folder (properties of the folder), click on "Advanced" of the window "Select Users or Groups". Change the location to the computer name then click on "Find Now". You'll find those users in the list below.
If you're using Anonymous Authentication, IIS 7 will use the "IUSR" account for directory access (unless you've set it to use the app pool identity. If you haven't granted IUSR sufficient permissions on your site's folders and files, you'll get this error
For me in windows 7 it started to work only after I gave 'Read & execute', 'List folder contents', 'Read' permissions to site folder for both users
IUSR
NETWORK SERVICE
Tried most of the solutions here, but no luck. What worked for me was adding "Everyone" to the security permissions. Properties -> Security -> Edit -> Add -> Everyone. The given defaults were enough for me to regain access.
In the near future, I should probably figure out what credentials are being sent to the server so that I can give proper permissions. But I hope it helps someone!
In the Authentication settings for APP itself (IN IIS), see if you have anonymous enabled.
We need to create a new user ComputerName\IUSR by going to the website folder-->Properties--->Security--->Edit-->Add and give read access. This would work definitely.
This solution is for IIS7
I went round and round on this and it turned out to be improperly set default page. Hope this helps someone else avoid an hour of wasted time.
In my case running c:\windows\Microsoft.Net\Framework64\v4.0.30319\aspnet_regiis.exe /i resolved the 403 access denied issue.
Checking the Application Pool Identity in Anonymous Authentication and enabling Forms Authentication would solve problem for access denied error. đ
After some thinking and a lot of of trial and error I found out that this error occurred because part of my web.config was encrypted and for some reason the key was no longer valid.
Re-encrypting the config section solved the issue.
After watching this tutorial :
https://www.youtube.com/watch?v=RbrZbHpXBTE&list=PLp1Emx1rT4z9YWLDXBjUwBb130qv2Zq2x&index=4&ab_channel=LearningProgrammingTutorial
I had the same problem using RDP ( windows server 2016 Datacenter )
i followed the tutorial above & enbaled my directory browsing options from the IIS internet infromation services manager.
what you want to do is to access your IIS manager , you can check out the tutorial above to learn how to access IIS manager if you have trouble acessing there , it was useful for me that's why I'm sharing then ... go to :
you should gave access to IUSER
( or application tool identity , depends or what you want to work with )
and your problem would be solved! :)
Also you need to check your firewall and TCP settings , if ping between two machines didn't work for you , you can check this out :
https://operavps.com/rdp-connection-issues/
It was due to WWWRoot directory security issue.
Simple solution is, Just copy applicatio folder to some other drive, Instead of "C:\Inetpub\wwwroot"
and then create a virtual directory for this new path. That's it.
If the IUSR user is already specified in Authentication and you're still getting this issue, it could be that your Directory Listing isn't enabled. Be sure to check that. That was the case for me.
This is what happened to me:
Get - Post is ok. Working well.
When I try to use Options verb, the server return error like that.
Then, beware with urlScan
I add OPTIONS verb to urlscan configuration .ini file, then everything works well.
To check if urlscan is installed or not, open your iis manager, and open ISAPI FILTERS url scan should appear at the list.
I was also facing the same issue,
Everything was normal all the rights were given to the user and for folder as well.
After many research i found that the wwwroot (Source code folder) was shared with some other user.
I stopped sharing and it worked like a charm.
I was facing this issue after pulling from remote master and adding to the appsettings on web.config.
I solved it by enabling Windows Authentication:
Click on the project and press f4
Make sure Windows Auth is enabled:
Related
I assume this is an IIS error, as this doesn't happen if I run the project on my local machine.
I have my stylesheets at ~/Content/css
Any files in that directory won't load on the page, and when I navigate to them directly, I get a server error:
401 - Unauthorized: Access is denied due to invalid credentials.
You do not have permission to view this directory or page using the credentials that you supplied.
This only happens with that directory, I have no problem accessing any other files. Is there something I need to do in IIS7 to stop this?
Open IIS and select site that is causing 401
Select Authentication property in IIS Header
Select Anonymous Authentication
Right click on it, select Edit and choose Application pool identity
Restart site and it should work
It is likely that you do not have the IUSR_computername permission on that folder. I've just had a quick scan and it looks like you will find the information you need here.
If that isn't the case, are you prompted for your username and password by the browser? If so it may be that IIS is configured to use Integrated authentication only, as described here.
Open IIS
select site where you are facing the problem
Select Below
- Right click on Anonymous Authentication and click on edit and follow below
You do not have permision to view this directory or page using the credentials that you supplied.
This happened despite the fact the user is already authenticated via Active Directory.
There can be many causes to Access Denied error, but if you think youâve already configured everything correctly from your web application, there might be a little detail thatâs forgotten. Make sure you give the proper permission to Authenticated Users to access your web application directory.
Here are the steps I took to solve this issue.
Right-click on the directory where the web application is stored and select Properties and click on Security tab.
Click on Click on EditâŚ, then Add⌠button. Type in Authenticated Users in the Enter the object names to select., then Add button. Type in Authenticated Users in the Enter the object names to select.
Click OK and you should see Authenticated Users as one of the user names. Give proper permissions on the Permissions for Authenticated Users box on the lower end if theyâre not checked already.
Click OK twice to close the dialog box. It should take effect immediately, but if you want to be sure, you can restart IIS for your web application.
Refresh your browser and it should display the web page now.
Hope this helps!
You need to check the folder permissions on your server and check that the account that you are using to run your application has access to that folder.
For me the Anonymous User access was fine at the server level, but varied at just one of my "virtual" folders.
Took me quite a bit of foundering about and then some help from a colleague to learn that IIS has "authentication" settings at the virtual folder level too - hopefully this helps someone else with my predicament.
In our case it was Windows-integrated authentication specified in the app's web.config
BUT the windows-auth module was not installed on the IIS machine at all.
Just adding another possible reason.
Another simple fix I found was to delete the local IIS site (from within IIS Manager) and then re-create the virtual directory from the "Properties" of your web project in Visual Studio.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 6 years ago.
Improve this question
What causes this error, how can I fix it?
Detailed Error Information
Module IIS Web Core
Notification BeginRequest
Handler Not yet determined
Error Code 0x8007052e
Config Error Can not log on locally to C:\inetpub\wwwroot as user administrator with virtual directory password
Config File Unavailable (Config Isolation)
Requested URL http://192.168.0.3:80/
Physical Path C:\inetpub\wwwroot
Logon Method Not yet determined
Logon User Not yet determined
Config Source
<application path="/" applicationPool="PS-Extranet">
<virtualDirectory path="/" physicalPath="%SystemDrive%\inetpub\wwwroot" userName="administrator" password="[enc:AesProvider:PrISRz2ggJH4bV46ktObfCSh91Y/yF9pAoLmH7eCnj0=:enc]" />
</application>
I had the same issue, but reason was different.
In my web.config there was a URL rewrite module rule and I havenât installed URL rewrite module also. After I install url rewrite module this problem solved.
Looks like the user account you're using for your app pool doesn't have rights to the web site directory, so it can't read config from there. Check the app pool and see what user it is configured to run as. Check the directory and see if that user has appropriate rights to it. While you're at it, check the event log and see if IIS logged any more detailed diagnostic information there.
On Windows 10 I had to install ASP.NET 3.5 and ASP.NET 4.6 under Internet Information Services (the other boxes automatically check themselves):
Finally I get the solution for my problem. The asp.net account not appear in the IIS manager because I didn't check its check Box in IIS to do this in windows 7 follow the steps
Open control panel
Click onâ programâ link (not uninstall programs)
Clickâ turn windows features on/offâ link
locateâ Internet Information services IISâ in the pop up window and expand its node
Expand theâ World Wide Web Serviceâ node
Expand âApplication Development Featuresâ node
check the check box ofâASP.NETâ
Then click ok button
Now you will see the Asp.net account on the IIS manager and by default you see IIS account Now you should move you asp.net website from âmy documentâ to another place the IIS have permission to access it (to any partition on your computer) Now browse your website from IIS manager and it should work.
We got this error after having to change our domain administrator password.
After monkeying with several settings, I eventually found that in the application in below path as it was set to specifically use the domain administrator account rather than pass-through authentication (who knows why).
IIS Manager -> Basic Settings -> Connect
you need to do one step:
run->cmd
run "c:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i"
Thats it
Experienced this issue today and resolved it. Someone had set the "Path Credentials" for the "Default web site" in IIS to run as a specific user. This same user changed her password either due to the password expiring or just a routine change. Setting the "Default website" to connect as the "Application User" via the basic settings option resolved it for me
you probably change your NT password.
Open IIS -> Right click on your application -> manage application -> advanced Setting -> physical path credentials.
good luck
In my case, this error appears after changing folder's solution.
I solve the problem by goin to my project properties and recreate my virtual directory.
Right click on project > Properties > Web > Under Servers section click "Create Virtual Directory"
It will display a message saying that the virtual directory was created in another place and it will change it
For me, I needed to enable Http Activation under the .Net features in "Add/Remove Windows Features"
Got this working alright but not based on suggestions above. My case is that am getting the 500 error running iis7 on a windows 2008 server in a domain. Just added a new user in the domain and basically allow read/execute access to the virtual directory or folder. Ensure that the virtual folder>basic settings> Connect As > Path credentials is set to a user with read/xecute access. You can test settings and both authentication and authorization should work. Cheers!
Default web site need to manage as well:
1 .On Default web site -> basicSettings -> connect as, change it to the right user.
2.change the Identiy of the applicationPool that related to the defaultWebSite
g.luck
Right now i had this error and resolved it. Your url could match with created virtual directory.
You have to check virtual directories, in my example i found in applicationhost.config next row:
<application path="/" applicationPool="Clr4IntegratedAppPool">
<virtualDirectory path="/admin/roles" physicalPath="C:\..." />
</application>
I tried to open page with an url (http://localhost/admin/roles) of AdminController and Roles action and got this error.
For others out there, I got a similar error message due to trying to run a .Net 4 app in a .Net 2 app pool. Changing the .Net FX version for the app pool fixed it for me.
I was having a similar error installing php 5.3.3 with the Error Code 0x80070020 with a direction to a few lines in web.config in my www root directory (not the standard root directory).
The solution, while crude, worked perfectly. I simply deleted the web.config file and now everything works. I spent HOURS trying other solutions to no avail.
If anyone thinks this was stupid, please let me know. If anyone else has spent the same amount of time pulling out hair, try it and see (after backing up the file of course)
Regards FEQ
Was having the same error and fixing the credentials in the IIS app pool did not help. I finally resolved the error in IIS by selecting my website under Default Web Site, Advanced Settings->Physical Path Credentials->Specific User, and reentered the credentials for the app pool user, then restarted IIS and the error went away and my website came up successfully.
As I got the 500.19, I gave IIS_IUSRS full access rights for the mentioned web.config and for the folder of the project. This solved the issue.
You can give permissions by
right click on the folder / file
selecting the tab "security"
add the user IIS_IUSRS - don't forget the i in front of USRS and don't write an "e" as in USERS
If it's bigin when you try to acces to joomla administrator panel, Just a username and password problem !! You have just to update a jos_user in your joomla database.
Go to your joomla web site directory and open a configuration.php with bloc note or note pad to show what database name your joomla administrator site use.
You have to find a line who have:
public $user = 'joomlauser251'; //MySQL username
In my case joomlauser251 is my DB name.
Login to your mysql:
mysql -uyourusername -pyourpassword
Select database for your joomla:
use joomlauser251;
Change password for admin:
UPDATE jos_users SET password=MD5(âNewPasswordâ) WHERE username=âadminâ;
And retry to acces again.
Thatâs all !!!
Didn't seem to be a permission issue for me - tried giving the IIS_IUSRS account full control over everything in the web service, just to see if this was the cause. The fix turned out to be recreating the application hosting the web service (i.e. the actual '.svc') in IIS
In my case, I found a reference to an old domain account password in applicationHost.config under Virtual Directory defaults.
so easy
find the file "applicationHost.config" in Windows -> System32 ->inetsrv -> config
1. backup "applicationHost.config" to another filename
2. open file "applicationHost.config" clear data and save
3. open browser and call url internal website , finished.
If you are using a new, dedicated, user account... It is also worth checking that the password for that account has not expired, as that will also cause this 500.19 permissions issue.
For ASP.NET Core websites, this generic error will also occur if you don't have the HttpPlatformHandler module installed, see this answer for more details.
ASP.Net applications come pre-wired with a handlers section in the web.config. By default, this is set to readonly within feature delegation within IIS. Take a look in IIS Manager
1.Go to IIS Manager and click Server Name
2.Go to the section Management and click Feature Delegation.
3.Select the Handler Mappings which is supposed to set as readonly.
4.Change the value to read/write and now you can get resolved the issue
I have just one more thing to say about this. With the same HTTP Error code, you can still have several different errors, as one of them has been posted here at the original question's description.
For example: after I've edited the Web.Config file of an ASP.NET project, I had
Error Code 0x8007000d
"Only one <configSections> element allowed. It must be the first child element of the root <configuration> element "
As it says, you must NOT insert your own XML stuff before the <configSections> part of the Web.Config file. After I've inserted my snippet after the end tag of <configSections>, it worked just fine.
My website's correct path was not specified in IIS.
My solution is that,
just delete the corrupted folder.
Then re-create folder again.
It seem that if the corrupted folder had been created before IIS
setup. If you created folder again, it will work correctly.
I got this error after uninstalling Windows Server Update Services (WSUS) from the computer running IIS. Apparently uninstalling WSUS may break the IIS configuration on the server making other web application installed on the same server unavailable.
I found the solution for the problem here.
In my case, the value of the Key was incorrect in Web.config file:
<defaultDocument>
<files>
<add value="Portal.htm" />
</files>
</defaultDocument>
when I change the value to "Portal.html" it worked.
I got this error after upgrading from Visual Studio 2013 to 2015. After a bit of searching and trying various fixes I found the problem can be resolved by removing the following from web.config:
<staticContent>
<mimeMap fileExtension=".less" mimeType="text/css" />
</staticContent >
Apparently staticContent is deprecated now?
Source
Edit 1
This sort of prevented IIS from serving .json files when the program was deployed. If you do this you're supposed to re-add .json (application/json) to the mime types of your site in IIS. Here is some more info: http://www.iis.net/configreference/system.webserver/staticcontent/mimemap
Edit 2
I noticed that in my situation the above edit 1 solution only works temporarily. Once I redeploy the entry gets removed. So, I moved the mimeMap XML into Web.Release.config. Works fine now.
Unfortunately I don't have a whole lot of information on this.
I have a customer who has moved their site from an ancient system to IIS7 on Windows 2008 Server. Info about the error is below:
Error:
E:\wwwroot\sp\xxx\online_data.xls
Microsoft VBScript runtime error '800a0046'
Permission denied
/xxx/oat/exceldata.asp, line 52
Code:
49 response.write(server.mappath("online_data.xls"))
50
51 set fso = createobject("scripting.filesystemobject")
52 Set act = fso.CreateTextFile(server.mappath("online_data.xls"), true)
The only suggestion so far is to:
grant the application pool
(DefaultAppPool / Classic AppPool)âs
impersonated identity read and write
permission to the physical folder
which the asp page reside
Will look at this when I get access, but other suggestions would be appreciated.
The provided answer is correct, but I needed a little more detail on how to accomplish it. To make it really easy, follow the steps below. I was setting up an asp page counter on a sandbox system in our intranet.
Open Computer Management.
Drill down to the IIS server
Management
In the Connections pane, click on
Application Pools
In the Application Pools pane,
right-click on DefaultAppPool and
choose Advanced Settings. Look in
the Process Model section.
By default, the Identity property is
set to ApplicationPoolIdentity.
This is a built-in account.
If it's set to the default, then you
can use the built-in user
machinename\IUSR for your
permissions settings. I had to
specify the machine name because
this is a virtualized server, YMMV.
If it's not set to the default, use
that username for your permissions
settings.
Cancel out of the dialog and return
to Windows Explorer, to the folder
where you need to add permission.
Right-click to get Permission
settings.
Set up machinename\IUSR or the
non-default username you determined
in steps 6/7 above. Grant
permissions as needed.
This helped:
http://learn.iis.net/page.aspx/140/understanding-built-in-user-and-group-accounts-in-iis-7/
The suggestion is correct. If the path to the solution is not immediately obvious for whatever configuration reasons, try running procmon (filter on "online_data.xls") and see who's failing, why, and what user account they run under. Then check the ACLs.
I had a similar problem in Windows 7 and my solution was changing the Authentication. From IIS, select the site, go to Authentication, disable Anonymous Authentication and enable Windows Authentication.
Spent a bit of time with something similar. Even with the correct settings it wasn't working.
I then tried create the actual file first on the server. Turned out to be the trick that worked. Now my ASP page writes to the existing file no problem.
Must be something about creating a new doc from scratch that is another issue.
I have been trying to configure a small website on a Windows Server 2008 running IIS 7. Unfortunately, when trying to load the website I keep getting the error: Server Error 401 - Unauthorized: Access is denied due to invalid credentials.
The permissions on the website folder include read, write, and execute for user ASP.NET v4.0. I even clicked "Check names" before adding the user to folder, to make sure that I spelled everything correctly. But the error continues to show. Also, I noticed that everything works okay if I add "Users" to the permissions for the folders containing the website, but I don't see why this should be necessary. I only want to give ASP.NET v4.0 access to the folder.
Some other noteworthy points include that I'm using the ASP.NET v4.0 application pool, that the managed pipeline is integrated, and that load user profile is set to true.
If anyone has any ideas, I'd appreciated the help. I'm stumped!
EDIT: Does it matter that the website is on the d: drive? I just assumed this wasn't important...
I find I always need to give IIS_IUSRS access.
I'd recommend you to use the Process Monitor to detect which user is actually accessing the file.
Here you'll find an explanation about how to achieve that.
Open IIS7 on the server. Highlight the site, and double-click on the Authentication icon in the Security Section. Check that Anonymous Authentication is enabled.
Some troubleshooting links for this particular issue:
http://support.microsoft.com/kb/902160
http://support.microsoft.com/kb/907273
I am trying to FTP to a new FTP site I setup with IIS 7.0 for the Windows Server Web (64-bit) edition. But I get the above error when I try to login to this site. But I can login to my other FTP sites.
Also, when I select this website from IIS Manager, the FTP section does not display in the middle section although it does display in Action panel. And I cannot successfully login to this FTP site either.
I have checked and I have Log on locally selected. I do not have allow only anonymous connections. I have Access this computer from the network selected.
I restarted my IIS and FTP services also.
The one different thing I noticed about this website in IIS different from the other site that has FTP working is that this one there are 3 virtual directories beneath the site. And that when I click on any one of these 3, then the FTP strip does appear in the center pane. Make sense?
How can I debug cause of this error? Any SW tools I can use?
Have you tried logging in from the FTP server? If you do this, and have "Show detailed messages from local requests" enabled under FTP Messages, then you'll get a clearer idea as to why the login if failing. In my case I got the following message (I am using IIS Manager Users, and Passthrough authentication)
530-User cannot log in.
Win32 error: Access is denied.
Error details: Filename: \\?\C:\Windows\system32\inetsrv\config\redirection.config
Error: Cannot read configuration file due to insufficient permissions
To solve this I gave the NETWORK SERVICES user read only access to the config directory specified in the error message. I'm not 100% sure this is the right thing to do, but it certainly fixed this issue for me.
in my situation, I was missing Role Service FTP extensibility, which is actually allows IIS Manager Auth.
This is pretty tricky, as you could allow IIS Manager auth, but still it would not work until you have not installed FTP Extensibility
In my case I forgot to enable the Basic authentication
There seem to be many different possible causes. In my case, I was unable to login with the plain "username" with the same error as mentioned.
It was solved when I logged in with ".\username" instead.
For some reason the FTP client was trying to login with a domain account, while I just wanted to login with a local computer account.
Hope this helps someone.
Try submitting your credentials in this format:
UserName: Domain|Username
Password: secretSquirrel
I had the same problem, I removed the FTP site and followed this:
http://www.iis.net/learn/publish/using-the-ftp-service/configure-ftp-with-iis-manager-authentication-in-iis-7
Prerequisites - I set the permissions on the folders using the 4 command samples but this did not alone fix the issue, so I cannot in good faith say this step is needed, but it is what I did and it now works.
CONFIGURE THE IIS MANAGEMENT SERVICE AND ADD AN IIS 7 MANAGER -
Just do step 4, removing the existing user first and then re-adding them.
Creating a New FTP Site and Configuring an IIS 7 Manager Account -
All the steps here
CONFIGURE THE FTP SITE TO USE IIS 7 MANAGER AUTHENTICATION
All 12 steps here, including the "administrator" setting in step 5.
Then it started working for me, I am guessing when I did this without a guide I skipped something simple.
In My case I have made that user a member of IIS_IUSERS.
Using IIS Users.
Do not isolate users -> User name directory was working fine. Users started in the right folder.
When I was switching to Isolate Users -> User name Directory I had the following error:
Response: 530 User cannot log in, home directory inaccessible.
Win32 error: The system cannot find the path specified.
For some reason, you need to add the LocalUser virtual directory that points to your root.
It has to be that exact name and it's case sensitive.
That worked for me.
Per this knowledgebase article, you would need the log on locally privilege enabled.
http://support.microsoft.com/kb/200475
I had the exact same error. In my case, I was using a local user defined on the server running FTP. The username was very short (3 characters). I could "run as" this user on the server, confirming that Windows was Ok with it, and allowed it to authenticate. But when testing FTP, it would return User cannot log in.
Solution? I renamed the user to be longer (4 characters). Of course, updated its name under Authorization as well. Then FTP worked. Hope it helps someone!
For me, I've configured the IIS as per usual procedure properly. The anonymous authentication was working but specific user are not.
because, the user accounts were created in IIS. Actually it was also supposed to be created Windows local accounts.
Then it worked.
Please Check the security of folder which is use that ftp .
see if the user or group you select for that ftp is associate with security of that folder .
In my case I had to remove domain from user.
So, your user should be like username, not like domain\username.
Hope it helps to somebody.
For some reason my user was "locked". So I could "unlock" it at local user manager (computer management). Now it works fine. I hope it helps.
I would recommend checking FTP logs first. The status code will give you more information about the issue. Here is the explanation of the status codes: The FTP status codes in IIS 7.0 and later versions
I had this issue because my IIS didn't support passive mode. After entering data in FTP Firewall Support module, the issue was solved.
More scenarios from this post 530 User cannot log in, home directory inaccessible
Authorization rules. Make sure to have an Authorization rule that allows the user or anonymous access. Check âIIS > FTP site > FTP Authorization Rulesâ page to allow or deny access for certain or all users.
NTFS permissions. The FTP users (local or domain users) should have permissions on the physical folder. Right click the folder and go to Properties. In the Security tab, make sure the user has required permissions. You can ignore Shared tab. It is not used for FTP access.
Locked account. If you local or domain account is locked or expired, you may end up seeing âUser cannot log inâ error. Check local user properties or Active Directory user settings to make sure the user account is active.
Other permission issues. The user account may not have âLog on locallyâ or âAllow only anonymous connections securityâ rights.
I spent long time looking for a solution, I've tried every shared answer on the internet and nothing could solve the issue. It is an issue I was ignoring for years and I never could fix.
Ok, I've Plesk installed and I'm not sure if it has some effect on IIS FTP to do the following behavior ...
Using Process Monitor tool, and making ftp login request and watching the tool and doing your investigation using this tool, you can get a hint about the REAL reason of the problem.
For me, I found out that IIS FTP was trying to access the ftp folder from a path DIFFERENT than the actual ftp path I've set, I do not know why, but maybe Plesk has some effect on this.
The actual ftp path is
C:\inetpub\vhosts\zidapp
The path that IIS FTP was trying to access DURING the login process is
C:\inetpub\vhosts\Servers\7\localuser\zid_app_ftp_user
I fixed the issue by creating a folder link from 'actual' folder path to the path IIS was trying to access - using the tool mklink tool
CMD command
mklink /d C:\inetpub\vhosts\Servers\7\localuser\zid_app_ftp_user "C:\inetpub\vhosts\zidapp"
I've fixed the issue that way, so wen FTP is trying to access the folder from the wrong path, it is now goes to the correct one.
Please note doing folder shortcut wont work for this, you need a link like linux, not a shortcut ...
I hope it will help you :)
You can check the reference account you are using to log in.
Mine happened to be locked out causing the 530 error.