I must preface this post by saying that I am not an experienced developer, I am in the process of learning through trial and error and a lot of google searches so detailed (step-by-step) feedback would be greatly appreciated. I created a website, which does not use a database, using visual studio 2015 and I am attempting to host it locally on a Windows 2008 R2 server.
I installed IIS and loaded the asp.net v4.0 framework. The site works fine, produces no errors when I test it and works after being published only if the visual studio is still running.
However, when I close the Visual studio and open my browser window to http://localhost:50044 (which is the URL listed in properties menu in VS), I also tried using port :80 and nothing. When trying to add Web Site via the IIS management utility I receive the following authentication error: ”Cannot verify access path (C:\Inetpub\wwwroot).”
I checked the permissions and windows authentication is enabled with read access, and all other permissions seem to be correct. I am at a loss, I'm sure it is probably something simple that I am missing due to my lack of knowledge and experience. Any help would be appreciated.
It's sounds like you are running on IIS express which in your case stops running when you close visual studio. Normal process is create a new website in IIS and point to the folder where your web.config is. You can then hack your host file (C:\Windows\System32\drivers\etc) so DNS works. Add an entry like "127.0.0.1 mytestwebsite.com". I hope that helps
So I figured out part of what was happening. I didn't realize that visual studio has built in IIS and was using that by default.
I ran VS as an admin, created a new project, then attempted to create a virtual directory thru VS under the project/properties/web tab. I selected local IIS and entered http://localhost/boc and it returns an error: unable to create vd. Web server http://localhost... Could not be found.
I then went in to the IIS manager and set up a virtual directory with no issues. However, when I attempt to reference it thru VS I again receive an error message.
Any ideas?
I've worked with ASP.NET once before and had a project where it was potentially useful, so I started creating an ASP.NET website as part of a solution that contained several C# class libraries.
I'm using Visual Studio 2010 Ultimate Edition and Windows 7 Professional x64. The issue is that when I try to debug my website project, I get the following error message:
Unable to launch the ASP.NET Development Server
There's no other information (it seems a popular variant is the "port in use" error).
Interestingly, I can run single pages on the application by right-clicking on the ASPX and selecting "View in Browser". This does not allow me to debug into my breakpoints, though.
I have no clue what the problem could be. I'm running VS2010 in Administrator mode. One of the questions that popped up here suggested I uncomment the "127.0.0.1 localhost" line from my HOSTS file, which I did, and restarted VS with no luck. I also tried both setting a static port for the web server to run on as well as let it dynamically generate one. Both do not help the situation.
Any help?
Thanks.
Added on 5/20/2010 at 9:25 CT
I can debug by attaching to the process. However, this is still a painful way to debug quickly so I'd still like a solution to the problem.
There are some things to check before listed here
Please eliminate issues on the link and check whether you may debug
Hope this helps
Myra
The problem was I had a InstallShield Lite project which was apparently causing problems. Once I unloaded that project, I can launch the development server in debugging mode.
There is a post on IIS.net titled "Using Visual Studio 2008 with IIS 7.0", but I don't quite believe that's what people do. (Among other gems, it suggests publishing your web app after every change.)
If you debug your ASP.NET applications in IIS7 instead of Cassini, I would love to hear your methods, tips, and tricks.
Edit: I'm referring specifically to local debugging.
I believe I pointed you toward that guide, but as I look closer at it I think that's a little more elaborate than what I do. I have done the following:
Create a web site in IIS for your project.
Add a custom host header to that site, for example http://mysite:*/ or http://mysite:80/
Open the hosts file located at C:\Windows\system32\drivers\etc in notepad (Run As Admin if you're on Vista) and add the following line:
mysite 127.0.0.1
If you have more than one host header on your website in IIS, you need to have each one represented in the hosts file.
Now, when you press F5 in Visual Studio, the site will open with the url http://mysite and you'll be able to debug, set breakpoints etc as usual, except with no Cassini related problems... ;)
Edit: For clarification, I just want to point out that I have never had to attach any process to VS, as far as I know. At the very least I do not have to do it every time.
I simply attach Visual Studio to the IIS worker process, if you have multiple app pools then you can run "issapp" to get the appropriate PID.
I never debug by clicking "Start Debugging".
This has a nice advantage of working on remote servers as well, if you have installed msvcmon.
Well, setting up IIS 7 for debugging isn't terribly tricky, but what I prefer to do to save time (and if I'm uninterested in debugging from a cold start) is to launch the Web Application/Web Site in a web browser first - let ASP.net precompile etc.
Then I'll attach to the IIS process using Visual Studio. Once attached I can go about setting breakpoints and debugging, I find this is a faster way to get going.
I launch Visual Studio as an Administrator, then Debug > Attach to Process > w3wp.exe.
I get the following error pretty regularly when compiling in Visual Studio and running my web application:
"Unable to start debugging on the web server. The web server did not respond in a timely manner. This may be because another debugger is already attached to the web server."
Normally this is after having debug the application once already. From the command line I run "iisreset /restart" and it fixes the problem.
How do I prevent this from happening in the first place?
The solution that worked for me:
Open Command Prompt (Run as Administrator)
Write iisreset /restart
Now, go back to your VS and debug. It will debug your solution.
It worked for Visual Studio 2013 and 2015 too in my case.
I find that this happens if I'm debugging with Firefox as my browser. When I exit Firefox the VS2005/8 debug session doesn't terminate. I have not found a solution for this (yet).
If this is what's happening with you then a quicker solution than running iisreset is to hit Shift-F5 when in Visual Studio and this will terminate the current debug session. You can then hit F5 and this will start a new debug session.
After trying all of the proposed solutions here and in other places (at least 10 different approaches), the only option that worked for me was:
delete website and application pool on IIS
re-create website and application pool on IIS (in my case, everything exactly the same config as before)
PS: I am using VS 2013 and IIS 7.5 (Win7).
I hope this saves someone else a few hours.
Go to task manager and end process aspnet_wp.exe before running application
I have had this problem a couple times. One time it was resolved by taking Guy's advice:
If this is what's happening with you then a quicker solution than running iisreset is to hit Shift-F5 when in Visual Studio and this will terminate the current debug session. You can then hit F5 and this will start a new debug session.
On a separate occasion I had to: terminate all my IIS worker processes in the windows task manager (w3wp.exe*). You should be able to hit f5 in visual studio to debug.
It sounds like you are probably hitting F5 in Visual Studio when you receive this error?
There are a few things you can try. The easiest is to hit the Stop button before hitting F5. Optionally, when you are finished debugging and starting to make changes you can go to the Debug menu and choose either Stop Debugging or Terminate All.
We use another way of debugging, we never use F5 anymore.
We use a macro kind of like: http://blogs.conchango.com/howardvanrooijen/archive/2007/06/24/Attach-to-Web-Server-Macro-for-Visual-Studio.aspx (Which we bound to F6).
This way you simply attach the debugger to IIS. It's (depending on project size) much quicker to make you changes, compile a single project that you changed and attach the debugger again.
When debugging 2 web application (1 MVC and 2 is MVC WebAPI) that are both hosted in the local IIS.
Make sure that each application is using a different application pool.
I encountered the same issue and as soon as I change the app pool of the other one, it worked!
I saw this message first time in my life and I was very confused about what is going on as it is not pretty obvious what to do.
I ran iisreset and it took just 1 sec to finish the execution, and boom, I was back into the game.
P.S. I am using chrome
Hit Shift+F5 when in Visual Studio and this will terminate the current debug session. You can then hit F5 and this will start a new debug session.
or
close your application, reset iis then open your application and run it
For me I had two visual studio open. The debugger already was attached to another visual studio :). I stopped it on the first one and was able to attach on the second visual studio.
Very basic - but check that if you try to run the web site from IIS by clicking on "Browse", the site actually runs.
It sounds like something is eating up your web server's resources. Perhaps you have some resources (file handlers, wcf proxies) that are being opened and not closed? I've had this happen to me specifically when I was not closing WCF client proxy connections.
The problem is not necessarily that you have a debugger attached, but only that the web server is not responding in a timely manner. Note that the message says "This may be because another debugger is attached".
If you have a lot of break points this will slow the debugging process down, so remove unneeded break points and close the Autos window this will solve your problem
The issue is normally there when an another instance of iexplore is still running. I used to have the issue when my IE crashes but I can still see it in the Task Manager. Once you "End Process" everything is back to normal :)
I ran into this issue when trying to debug (2) separate solutions in VS.NET and both were using the IIS Web Server to launch the app. The 1st application will start, but any subsequent applications started that also run via IIS will then display that error. It seems that it can only debug a single application via VS.NET hosted in IIS at a time.
The solution: run project 1 from VS.NET (place any needed breakpoints) and start the second application directly from IIS (not VS.NET). Your breakpoints in App 1 (running in VS.NET) will be hit when accessing App 2 (ran from IIS directly).
This happens to me quite a bit in VS 2010 express - Usually because the debugger stopped responding.
Right click windows taskbar, select 'Start Task Manager'. More than likely the ASP.NET debugger will be showing a 'not responding' status. Select it and simply terminate the process.
Done!
With me it happened when IE was upgraded to newer version, went to Installed Updates, removed new version of IE, after computer restarted it went back to old version and problem with debugging was solved
Had the same problem, even after a reboot. Basically did this:
Restart IIS
Clean Solution
Rebuild Solution
Then it started working again.
This can also be caused if your website uses a database connection but the database server is unavailable.
I spent some time trying to resolve this issue in the usual ways, but even after restarting my workstation, the issue remained. Eventually I found that the SQL Server (MSSQLSERVER) service was not running.
It should have been running, as it's set to Automatic, but it was stopped, even after the reboot. All the MSSQLSERVER events in the event log appeared normal, so it remains unknown why it wasn't running, but I have now set it to Automatic (delayed start) in the hope that this will reduce resource contention during startup.
Once I started MSSQLSERVER , the message "Unable to start debugging on the web server. The web server did not respond in a timely manner" no longer appeared and normal service was resumed.
I had to recreate the site/application/virtual directory to make it work after I installed vs2015 update3. Hope this helps someone. ;)
I know this is an old question, but I met the same situation recently and try every solution in this post, and no luck. Finally, I found the solution that works for me:
Close Visual Studio
Find Turn Windows features on or off in Control Panel
Uncheck Internet Information Services in the popup dialog
Restart your computer
Check Internet Information Services in the same dialog, and make sure Internet Information Service -> World Wide Web Services -> Application Development Features -> ASP.NET also been checked
Open Visual Studio, and now your application should be able to run in debug mode
Open
Options and Settings Under the debug
Symbols and unchecked Microsoft Symbol Servers
build solution
iisreset
F5 solution
(Be sure Microsoft Symbol Servers unchecked again)
This worked for me by #mtkachenko
Visual Studio 2012: Unable to attach the process. A debugger is already attached
"I have installed Debug Diagnostic Tool v2.0 and as a result I have Debug Diagnostic Service which is started automatically and attached to one of w3wp processes. After turning off and disabling this service all works fine. So if you get such error check processes in task manager which can capture your w3wp process"
I got it worked by creating a new ApplicationPool in the IIS Server and pointing my application to the new ApplicationPool. I have also deleted the old ApplicationPool
This answer will only apply if you are running your solution through IIS. You will know if this applies to you IF you open up your website/project by doing the following:
From within visual studio-->Open Website--> Local IIS -->Select your project
This error Kicked my butt for 4 hours but finally I found an answer. I first attempted the iisreset /restart. This seemed to slightly help but still received the same error.
What worked for me was going (xp machine) to add/remove programs --> Add/Remove Windows Components--> Click on IIS--> Click on "Details". Be sure to have Front Page Extensions installed if you are debugging through IIS.
If all the answers does not work for you, just end process all IIS related components in task manager. This is what worked for me.
I just solved this problem on my machine.
My problem is that I upgraded IE 9 To IE 10 and I got this error.
Solution : Remove IE 10 and downgrade to IE 9.
Go to "Programs and Features" --> "View recent updates" --> find IE 10---> Uninstall it-->reboot--->ie 9 is back--->debug--->works OK.
Try performing either of the following steps to resolve your issue:
Restart your IIS Server
Clean the Solution of your project then build again
If above steps do not help, you can finally try restarting your machine
In your cmd type iisreset and press enter after that your iis is reset and your application is working perfectly