I would like to use routing to caching to client webbrowsers dynamic images generated.
I have created this routing code for .Net 4.0
routes.RouteExistingFiles = false;
routes.MapPageRoute("ImageWithLogo", "imageWithLogo/{Id}/{Width}/{Height}/image.jpg", "~/utils/imageWithLogo.aspx");
Trying this for example "imageWithLogo/1623/100/200/image.jpg" I always get the error Error HTTP 404.0 - Not Found, IIS always try to find the imageFile in web folder.
How can i make that IIS don't try to find the file in the web folders and always apply the routing?
Thanks
Sorry, I have find the solution in another Question in stackoverflow ASP.NET 4.0 URL Routing HTTP Error 404.0 - Not Found
Related
I tried creating new web applications...
I have been using VS 2010 for developing website
I make use of wsp builder to package all my dlls, pages, scripts and images into a solution package and deploy it in the web applications.
I am trying to get a MVC Web App running in my IIS. Unfortunately, I am absolutely stuck on this error:
HTTP Error 500.19 - Internal Server Error
The Request page cannot be accessed because the related configuration data for
the page is invalid.
Module: IIS Web Core
Notification: Unknown
Handler: Not yet determined
Error Code: 0x80070005
Config Error: Cannot read configuration file due to insufficient permissions
Config File: \\?\C:\Users\dev.fuji\Desktop\Mywebiste\web.config
Request URL: http://xxx.xxx.xxx.xxx
Logon Method: Not yet determined
Logon User: Not yet determined
Config Source
-1:
0:
I am not quite sure what else to do. Why I got this error, I search even youtube but everyone get it worked but why not me.. I do almost exactly they done.
MAYBE** because before this the server already done by someone else in my place... I new worker in my it department...so I miss the installment part in video.. Is that what make the error? Do I have to reinstall my iis??
If anyone has any information or would be able to help me work through this it would be much appreciated. Thanks!
Your config file shouldn't be located on the dev desktop.. it should be within your website, and that website should be located somewhere within IIS (default location is c:\inetput\wwwroot\). Start there, if you have any questions, I'd say give this URL a shot first: http://www.iis.net/learn/get-started/getting-started-with-iis/create-a-web-site
Good day!
I'm writing a very simple asp mvc 4 app which is a simple static site.
When i send a request from the site to app - I get the following error on my first attempt:
The resource cannot be found.
Description: HTTP 404. The resource you are looking for
(or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /EmailSendApp/login.aspx
On my second attempt, i click "send" and my app works well!
Why is it not working the first time?
Thank you!
It is Intranet site and i use Windows authorization.
It is ASP MVC application with Windows authorization.
In MVC application we cannot write .aspx extension in browser url.In mvc application viewpage extension is .cshtml so please remove .aspx extension in browser url.
Your requested url could be like this http:localhost/EmailSendApp/login
so your request is sent to login method which is present in EmailSendApp controller
I am trying to set up an existing asp.net application onto IIS 8.0 on my windows 8 machine and it giving me the following error message.
HTTP Error 404.17 - Not Found
The requested content appears to be script and will not be served by the static file handler.
I googled for a while and trying to solve this problem with several solutions such as registering asp.net manually. However,it is still not working.
Most of the solutions are for IIS 7.5 and the problem is the same or not.
Any idea!
really appreciate.
As the blogger that Gearhart refers to points out, the problem may be that .NET 3.5 is not installed for IIS. 3.5 handles the down-level apps including 2.0.
The procedure in the blog looks simple and may work fine. However the "official" procedure from Microsoft looks different:
Step 1: Install IIS and ASP.NET Modules
http://technet.microsoft.com/en-us/library/hh831475.aspx
Scroll down to the section on Windows 8. (I'm using Server 2012 and the procedure for that worked for me.)
Had the same problem se blow link for solution
http://www.bitshop.com/Blogs/tabid/95/EntryId/110/-Net-wont-run-HTTP-Error-404-17-Not-Found.aspx
I had this issue on Server 2012 R2. For me the fix documented here worked.
In essence...
The fix is simple:
Launch Command Prompt - Start - cmd.exe
cd C:\Windows\Microsoft.NET\Framework64\v2.0.50727
aspnet_regiis -ir
You should see output like:
Start installing ASP.NET (2.0.50727).
................
Finished installing ASP.NET (2.0.50727).
At this point if you refresh your page it should work properly. HTH
Thanks it work.
I had the same error...and i run command prompt
HTTP Error 404.17 - Not Found
The requested content appears to be script and will not be served by the static file handler.
Most likely causes:
The request matched a wildcard mime map. The request is mapped to the static file handler. If there were different pre-conditions, the request will map to a different handler.
Things you can try:
If you want to serve this content as a static file, add an explicit MIME map.
Detailed Error Information:
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://localhost:8080/WebForms/index.aspx
Physical Path C:\inetpub\wwwroot\HRMS\WebForms\index.aspx
Logon Method Anonymous
Logon User Anonymous
Request Tracing Directory C:\inetpub\logs\FailedReqLogFiles
I've created a "test" application below the main application on my website which is an exact duplicate of the main application - I use the /test app to test new changes before putting them in production.
After upgrading the app from .NET 3.5 to .NET 4.0, my /test application refuses to run, returning a 500.19 error from IIS. My main application (and another sub-app at the same level as /test) runs just fine.
I found a lot of references about the 500.19 error and they usually boil down to some line in the web.config that is invalid.
However, in my case the error doesn't point me to any specific line -- the error message is copied below, note that the "Config Source" section is empty.
Error Summary
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information
Module IIS Web Core
Notification BeginRequest
Handler Not yet determined
Error Code 0x800700b7
Config Error
Config File \\?\c:\blahblahblah\test\web.config
Requested URL http://localhost:80/blahblahblah/test
Physical Path C:\blahblahblah\test
Logon Method Not yet determined
Logon User Not yet determined
Config Source
-1:
0:
Any clues would be appreciated!
Glad you're sorted now.
For me (and these guys) this error was a due to the URL Rewrite Module not having been installed - look for a 'rewrite' section in the web.config.
Nevermind... ;-)
The problem was because of a duplicate section where I forgot to add a section before the for a custom provider. (at the same time that I upgraded to .NET 4.0, I added a custom provider for encrypting sections of my web.config...)
I found the error the old-fashioned brute force way by commenting one chunk at a time in the config file until it started working...
This error might also be related to trying to run a .net 4.0 application on a IIS that has not been -iisreg with the .net 4.0 path
I am developing a website using ASP.Net MVC. I have a method in the Home controller which returns a partial view when called. The issue is when I am calling the controller method using jQuery, I get a 404 Not Found error.
This only happens when the application is deployed on IIS 7. It works fine during development, but after deployement, none of the controller are found when called through jQuery.get method or post.
Thanking you all in advance for helping me.
I had the same problem. The simple fix for me was to do a aspnet_regiis -r
is the error an asp.net error (yellow and red) or the default iis7 html error? if its iis7 default error, make sure IIS7 has asp.net installed, that caught me out when i first started working with it. (programs and features and add windows components and make sure asp.net is selected under IIS)
Actually, the website is running, I can navigate among pages, only if there is a call through jQuery.get or post methods, then the error occurs. I guess, there is an issue with ISS 7 regarding recognizing that its a controller method. The error text is given below.
HTTP Error 404.0 - Not Found
The resource you are looking for has been removed, had its name changed, or is temporarily unavailable .
Thanks.
Make sure you have ASP.NET MVC installed and running. Also, make sure that your application is installed properly with appropriate references.
Like Tony says above, make sure you can actually access the complete URI (controller/method) in a browser to see if it works ok.
what is the URL that the jQuery.get method is accessing?
If it does, check how you have wired your Ajax call.
Do the method in your code have the AcceptVerbs attribute defined? [AcceptVerbs(HttpVerbs.Post)]
If you are deploying your mvc app as a virtual web make sure that BOTH your virtual web and the root site has its Application Pool set as Integrated Pipeline.
If you are running ASP.NET MVC on IIS7, make sure you configure IIS to run in "Integrated Pipeline Mode" as opposed to "Classic". You'll have more success with routing in this mode. More here.
I had same problem.
solved issue by changing the ajax url.
Just for an example ,
if you are using ajax call to the controller:
have to write url as like this == url: '#Url.Action("actionmethod", "controller")',
instead of ===== url: '/controller/actionmethod',
Thanks