In cmdline everything is OK:
d:\xampp\htdocs\PhpProject1\Tests>phpunit TestStub.php
PHPUnit 3.6.10 by Sebastian Bergmann.
.
Time: 0 seconds, Memory: 2.75Mb
OK (1 test, 1 assertion)
Called in NetBeans7.1:
Fatal error: Uncaught exception 'PHPUnit_Framework_Exception' with message 'Could not find class "" in "D:\Program Files (x86)\NetBeans 7.1\php\phpunit\NetBeansSuite.php".' in D:\xampp\php\PEAR\PHPUnit\Util\Skeleton\Test.php:123
Stack trace:
0 D:\xampp\php\PEAR\PHPUnit\TextUI\Command.php(157): PHPUnit_Util_Skeleton_Test->__construct('', 'D:\Program File...')
1 D:\xampp\php\PEAR\PHPUnit\TextUI\Command.php(130): PHPUnit_TextUI_Command->run(Array, true)
2 D:\xampp\php\phpunit(46): PHPUnit_TextUI_Command::main()
3 {main}
thrown in D:\xampp\php\PEAR\PHPUnit\Util\Skeleton\Test.php on line 123
I think this is a NetBeans issue.
If I run:
d:\Program Files (x86)\NetBeans 7.1\php\phpunit>phpunit NetBeansSuite.php run=d:\xampp\htdocs\PhpProject1\Tests\TestStub.php
PHPUnit 3.6.10 by Sebastian Bergmann.
.
Time: 0 seconds, Memory: 2.75Mb
OK (1 test, 1 assertion)
It's OK. But if I give the test directory, it fails.
d:\Program Files (x86)\NetBeans 7.1\php\phpunit>phpunit NetBeansSuite.php run=d:\xampp\htdocs\PhpProject1\Tests\
Fatal error: Uncaught exception 'PHPUnit_Framework_Exception' with message 'Could not find class "" in "D:\Program Files (x86)\NetBeans 7.1\php\phpunit\NetBea
nsSuite.php".' in D:\xampp\php\PEAR\PHPUnit\Util\Skeleton\Test.php:123
Stack trace:
0 D:\xampp\php\PEAR\PHPUnit\TextUI\Command.php(157): PHPUnit_Util_Skeleton_Test->__construct('', 'D:\Program File...')
1 D:\xampp\php\PEAR\PHPUnit\TextUI\Command.php(130): PHPUnit_TextUI_Command->run(Array, true)
2 D:\xampp\php\phpunit(46): PHPUnit_TextUI_Command::main()
3 {main}
thrown in D:\xampp\php\PEAR\PHPUnit\Util\Skeleton\Test.php on line 123
Any temporary solution?
When running PHPUnit against a single file it will always open the file and look for a test case inside of it.
When running it against a directory (what netbeans does) it will only look into files that end in *Test.php (unless something else is specified in the phpunit.xml).
If it can't find any Tests it will try to look into the $TestSuiteName folder and {$TestSuiteName}.php files hence the error message:
Fatal error: Uncaught exception 'PHPUnit_Framework_Exception' with message 'Could not find class ""
as it is looking for a "not named" test suite in the netbeans phpunit harness. The error message is really not helping you out there :)
The general suggestion would be to create a phpunit.xml and point Netbeans to it.
On a more personal note: From the phpunit support in the major IDEs Netbeans does quite a lot of things right and works well for a lot of people so don't let this bump discourage you from using it from the IDE if thats what you want.
Related
I tried to migrate yo-cordapp from version 2.0 to 3.0 but gets this error.
FAILURE: Build failed with an exception.
Where:
Build file '/home/atul/Documents/mg/IdeaProjects/yo-cordapp/build.gradle' line: 36
What went wrong:
A problem occurred evaluating root project 'yo'.
Failed to apply plugin [id 'net.corda.plugins.cordformation']
Could not create plugin of type 'Cordformation'.
Could not initialize class net.corda.plugins.Cordformation
Try:
Run with --stacktrace option to get the stack trace. Run with --debug option to get more log output.
BUILD FAILED
Total time: 0.513 secs
Stopped 0 worker daemon(s).
Received result Failure[value=org.gradle.initialization.ReportedException: org.gradle.internal.exceptions.LocationAwareException: Build file '/home/atul/Documents/mg/IdeaProjects/yo-cordapp/build.gradle' line: 36
A problem occurred evaluating root project 'yo'.] from daemon DaemonInfo{pid=1439, address=[1bb69a7c-e166-4da4-be23-025402c62d96 port:36544, addresses:[/0:0:0:0:0:0:0:1, /127.0.0.1]], state=Idle, lastBusy=1527564107106, context=DefaultDaemonContext[uid=dbe9d9f3-b86b-448f-8d35-648c4aad50fd,javaHome=/usr/lib/jvm/java-8-oracle,daemonRegistryDir=/root/.gradle/daemon,pid=1439,idleTimeout=10800000,daemonOpts=-XX:MaxPermSize=256m,-XX:+HeapDumpOnOutOfMemoryError,-Xmx1024m,-Dfile.encoding=UTF-8,-Duser.country=IN,-Duser.language=en,-Duser.variant]} (build should be done).
why i am getting this error
[PS : i know this migration already bean done but i am getting this error when i tried.]
You need to apply the new cordapp plugin. See https://github.com/corda/cordapp-example/blob/release-V3/kotlin-source/build.gradle#L11.
I am very new to Symfony. I have installed Symfony in my system with symfony demo command it's working fine. I installed in that folder already developed project code. when use php bin/console server:start 0.0.0.0:8000 this command I am getting error:
PHP Fatal error: Uncaught RuntimeException: The autoloader expected class "AppKernel" to be defined in file "/home/Desktop/commercetools-sunrise-php-master/vendor/composer/../../app/AppKernel.php". The file was found but the class was not in it, the class name or namespace probably has a typo. in /home/Desktop/commercetools-sunrise-php-master/vendor/symfony/symfony/src/Symfony/Component/Debug/DebugClassLoader.php:223
Stack trace:#0 [internal function]: Symfony\Component\Debug\DebugClassLoader->loadClass('AppKernel')#1 /home/Desktop/commercetools-sunrise-php-master/bin/console(26): spl_autoload_call('AppKernel')#2 {main}
thrown in /home/Desktop/commercetools-sunrise-php-master/vendor/symfony/symfony/src/Symfony/Component/Debug/DebugClassLoader.php on line 223
Any one can help me. Thanks in advance.
There may be a corrupted generated PHP file. Try this :
composer run-script post-install-cmd
PHPUnit: 4.8.31
PhpStorm: 2016.1
I'm having issues running PHPUnit from within PhpStorm. From a CMD window, running the test works fine, but the PhpStorm output is this:
"C:\Program Files (x86)\EasyPHP-Devserver-16.1\eds-binaries\php\php704vc14x86x161109103716\php.exe" C:/Users/username/AppData/Local/Temp/ide-phpunit.php --no-configuration "C:\tests"
Testing started at 5:30 PM ...
Warning: PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\EasyPHP-Devserver-16.1\eds-binaries\php\php704vc14x86x161109103716\ext\php_curl.dll' - The specified procedure could not be found.
in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\EasyPHP-Devserver-16.1\eds-binaries\php\php704vc14x86x161109103716\ext\php_curl.dll' - The specified procedure could not be found.
Fatal error: Class 'PHPUnit_TextUI_ResultPrinter' not found in C:\Users\username\AppData\Local\Temp\ide-phpunit.php on line 253 in Unknown on line 0
PHP Fatal error: Class 'PHPUnit_TextUI_ResultPrinter' not found in C:\Users\username\AppData\Local\Temp\ide-phpunit.php on line 253
Process finished with exit code 255
I've included the folder with my phpunit.phar library in PhpStorm:
PhpStorm knows about the include paths, autocomplete works.
The run config looks like this:
The PHP version/install I'm using is the same one.
Windows:
PhpStorm:
Any ideas?
I tried running a script that uses curl from a CMD window and saw that the curl library wasn't loaded.
I did phpinfo(); and saw that the CMD window was using a different PHP installation (I had installed a new EasyPHP version).
I made the windows sys variable PATH point at my old one, then it started throwing some errors about not loading some libraries (php_curl.dll, libssh2.dll), so I moved them from the new install folder to the old one and to Windows\SysWOW64.
Miraculously, the PhpStorm run config was also fixed, which leads me to believe it doesn't use the interpreter I set in its options, but rather the one from PATH..
The PhpStorm output is now:
"C:\Program Files (x86)\EasyPHP-Devserver-16.1\eds-binaries\php\php704vc14x86x161109103716\php.exe" C:/Users/username/AppData/Local/Temp/ide-phpunit.php --no-configuration "C:\tests"
Testing started at 9:22 AM ...
Warning: The use statement with non-compound name 'PHPUnit_Framework_TestCase' has no effect in C:\DummyTest.php on line 3
PHPUnit 4.8.31 by Sebastian Bergmann and contributors.
PHP Warning: The use statement with non-compound name 'PHPUnit_Framework_TestCase' has no effect in C:\DummyTest.php on line 3
No tests found in class "TestDummy".
Time: 372 ms, Memory: 10.00MB
FAILURES!
Tests: 1, Assertions: 0, Failures: 1.
Process finished with exit code 1
i'm trying to build an signed apk with visual studio /Cordova template. But i'm receiving this error: ERROR building one of the platforms 1
And : Error MDAVSCLI 1
I´m following this tutorial:
http://taco.visualstudio.com/en-us/docs/tutorial-package-publish-readme/
and my Keystore is like image bellow:
-package-resources:
[aapt] Creating full resource package...
-package:
[apkbuilder] Current build type is different than previous build: forced apkbuilder run.
[apkbuilder] Creating MainActivity-release-unsigned.apk for release...
-post-package:
-release-prompt-for-password:
-release-nosign:
-release-sign:
[echo] Signing final apk...
BUILD FAILED
C:\Users\Leo\AppData\Local\Android\sdk1\tools\ant\build.xml:1135: The following error occurred while executing this line:
C:\Users\Leo\AppData\Local\Android\sdk1\tools\ant\build.xml:1147: C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\"my-release-key.Keystore" (The file name syntax, the name of the directory or volume label incorrect)
Total time: 52 seconds
Picked up _JAVA_OPTIONS: -Xmx512M
C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\cordova\node_modules\q\q.js:126
throw e;
^
Error code 1 for command: cmd with args: /s /c "ant release -f C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\build.xml -Dout.dir=ant-build -Dgen.absolute.dir=ant-gen"
Command finished with error code 1: C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\cordova\build.bat --release
ERROR building one of the platforms : error : C:\Users\Leo\Desktop\Mobile\Mobile\platforms\android\cordova\build.bat: Command failed with exit code 1
You may not have the required environment or OS to build this project
MDAVSCLI : error : C:\Users\Leo\Desktop\Mobile\Mooobile\platforms\android\c
I've found a way : removing the quotes in my ant.properties i can build.
I'm getting the following error when attempting to run my own Symfony unit tests in PhpStorm:
/usr/bin/php /home/kevin/www/src/Blah/MyBundle/Tests/Controller/HomeControllerTest.php
PHP Fatal error: Class 'Symfony\Bundle\FrameworkBundle\Test\WebTestCase' not found in /home/kevin/www/src/Blah/MyBundle/Tests/Controller/HomeControllerTest.php on line 8
PHP Stack trace:
PHP 1. {main}() /home/kevin/www/src/Blah/MyBundle/Tests/Controller/HomeControllerTest.php:0
Fatal error: Class 'Symfony\Bundle\FrameworkBundle\Test\WebTestCase' not found in /home/kevin/www/src/Blah/MyBundle/Tests/Controller/HomeControllerTest.php on line 8
Call Stack:
0.0002 234112 1. {main}() /home/kevin/www/src/Blah/MyBundle/Tests/Controller/HomeControllerTest.php:0
Process finished with exit code 255
Some research has informed me that I may have to point PhpStorm/Xdebug to Symfony's bootstrap and/or test suite XML file, but I'm not sure how to do that in PhpStorm. Nothing is jumping out at me in the various config screens. Please help.
Although I'm using IntelliJ IDEA, the configuration is the same, so:
Settings -> PHP -> PHPUnit - there are inputs for bootstrap and config