A student in my chemometrics course installed R on Windows 7. Apparently, R picked up something from his computer automatically, so R operates in Chinese (yes, he is Chinese). He's trying to change it back to English (important because scripts must be turned into me in English!).
He sent me the 1st screen shot below. The 2nd screen shot shows my suggestion to change the locale. R reports (in Chinese) that it can't change it.
Any suggestions? Thanks.
Check sessionInfo()
try:
Sys.setlocale("LC_ALL", "English")
Run R with the added command line parameter LANGUAGE=en OR delete the share/locale folder:
http://notepad.patheticcockroach.com/412/how-to-change-language-in-r/
Windows likely has a way to set the locale information passed to a program, though I don't know how offhand. You could try setting it there, outside of R.
Related
Is there an easy way to have R record all input and output from your R session to disk while you are working with R interactively?
In R.app on Mac OS X I can do a File->Save..., but it isn't much help in recovering the commands I had entered when R crashes.
I have tried using sink(...,split=T), but it doesn't seem to do exactly what I am looking for.
Many of us use ESS / Emacs for this very reason. Saving old sessions with extension '.Rt' even gives you mode-specific commands for re-running parts of your session.
Greg Snow wrote recently on the R-help list (a very valuable resource, SO R people!):
"You may also want to look at ?TeachingDemos::txtStart as an alternative to sink, one advantage is that the commands as well as the output can be included. With a little more work you can also include graphical output into a transcript file."
r-help
Check out the savehistory() command
I'm not sure yet how to answer an answer, but there is an updated version of Ranke's vim r-plugin called r-plugin2 available here. It seems more user-friendly and robust than the original.
Emacs is good, but for those of us with a vi preference there's the vim-r plugin at:
http://www.uft.uni-bremen.de/chemie/ranke/index.php?page=vim_R_linux
It works brilliantly and has a tiny memory footprint.
Does anyone know how to get R to match brackets/quotes in Windows the way a Mac GUI does? On macs, when you enter a bracket or quote it automatically brings up the closing bracket/quote.
For instance, in Macs, when you type
summary(
You get
summary()
But in Windows RGUI you simply get
summary(
I am getting sick of having to type parens/brackets/quotes after each function I input and then counting to make sure I have enough.
Thanks for the help.
Paul
Try RStudio. It'll change your life.
I am using R 2.15.2 on windows XP.
I was used to use Rgui.exe but it was lacking the UNIX standards I like to use like CTRL+R <=>backward research and CTRL+U <=>erase line ...
If I missed something please tell me !
Then I tried Rterm.exe (which looks identical to R.exe to me) which has all those nice features. I found how to tune it right clicking on the top of the window to set height-width (it is like tuning the window you get from cmd.exe).
The problem is that now I cannot see on the window more than 75 characters, with a $ at the end: like this:
R) ppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppppp$
Not sure if it is a R option of a windows one, but if I set options("width"=180) I can see data.frame on the full width of the window...
Not sure what is happening, can I modify this?
We still do not know the answer to that one, so I guess 50 pts goes to Oscar de León... good for him to bad for me...
Sadly, it appears to be built in.
There used to be a problem with R when trying to print long strings. Apparently it was fixed first in Rterm and other versions of R before being fixed in Rgui.
When Rgui was fixed, possibly it was by a different means, since this issue can be fixed in Rgui but not other windows versions of R. You can change the width of the console for output both in Rgui and (later) Rterm.
The prompt is another story. It is actually not the same as the output space, and thus is controlled with a different option; but, this only works for Rgui. To do it, set pgcolumns=180 in the Rconsole file under [R HOME]\etc\. This modifies the width of the internal pager of the Rgui console, and effectively enables you to type up to 180 characters per input prompt.
Possibly there is a way to integrate that behavior into Rterm, and maybe Duncan Murdoch can point you in the correct direction (or prove me completely wrong).
I'm not really sure what is being requested. If what is needed in RTerm.exe is to display the end of a long line (and position the cursor there), then use CTRL-E. You can go back to the beginning of a line with CTRL-A. One can go back and forth repeatedly as needed until the line is use ENTER.
The control character of readline seem to be active, for instance CTRL-P scrolls back one command and CTRL-N brings up the "next" command from history if you hit CTRL-P too many times. (These are the same behavior as the up/down arrow keys.) See link for other expected readline behaviors.
On my machine alt-f and alt-b (which should have been meta-f and meta-b) did not natively move forward or backward by words, but ESC-b and ESC-f did so on a line that exceeded the console width and had the $'s marking either the right or left extents as having further material to look consider.
If you want to wrap display lines, then you need to consider alternatives or additions to readline: link, but that is an untested suggestion and merely the results of a search for: "readline wrap display".
The command should be options(width = 180) (without the quotes around width), but when you run Rterm in the Windows shell, it doesn't respect changes to this value; it just prints output as wide as the console.
The best way of working with R is (almost always) to use an IDE. Try emacs + ESS or one of the many vim plugins (R.vim, vim-R, VIM:r-plugin) if you want something UNIXy.
I am attempting to automate the insertion of JPEG images into Powerpoint. I have a macro done for that already, except using R would be infinitely better for my purposes.
The package R2PPT should do this, I understand. However, I cannot use it. For example, when I try to use PPT.Open, I understand I can do it two different ways by calling method = "rcom" or method = "RDCOMClient". Using the latter, R will always crash, sending an error report to windows. Using the former, it tells me I need to install statconnDCOM , before giving the error:
Error in PPT.Open(x) : attempt to apply non-function.
I cannot install statconnDCOM freely, as I wouldn't call this work non-commercial. So if there isn't a way to get around this issue, are there at least some free alternatives to R2PPT so that I can save several hours of manual work with a simple R code? If there is a way for me to use R2PPT, that would be ideal.
Thanks!
Edit:
I'm using R version 2.15 and downloaded the most recent version of R2PPT. Powerpoint is 2007.
Do you have administrative privileges on this machine?
There is an issue with package RDCOMClient. It needs permissions to write file rdcom.err in the root of drive C:. If you don't have privileges to write to c:, there is a rather cumbersome workaround:
Close R
Create "c:\temp" folder if it doesn't exist.
Locate on your hard drive file rdcomclient.dll. It usually placed in \R\library\RDCOMClient\libs\i386\ and in \R\library\RDCOMClient\libs\x64\ (you need to patch file which corresponds your Windows version - 32 bit or 64 bit). It's recommended to make backup copy of this files before patching.
Open rdcomclient.dll in text editor (Notepad++, for example -http://notepad-plus-plus.org/)
Find in file string c:\rdcom.err - it occurs only once.
Go into overwrite mode (usually by pressing "Ins" key). It is very important that new path will have the same number of characters as original one. Type C:\temp\e.rr instead of c:\rdcom.err
Save the file.
Now all should work fine.
Arguably not an answer, but have you looked at using Sweave/knitr to render your presentations in LaTeX using something like Beamer? (As discussed on slide 17 here.)
Wouldn't help any with getting JPGs into a PowerPoint, but would certainly make putting R-output (numerical or graphical) into a presentation much easier!
Edit: if you want to use knitr (which I recommend), here's another reference.
How to set for good parameter help_type="text" in R ? Have I to type command options(help_type="text") every time I start R session, or could it be setted as constant ?
You can put that option choice in a .Rprofile file in the directory in which you start R. I use that method to load frequently used functions and a default set of packages.
I suppose I should mention that files beginning with a period (so-called dot-files) are sometimes hidden by the OS. (I know this to be true on Macs and Windows boxes.) On a Mac you can change the behavior of the Finder.app to display these files. That means you can use your OS GUI to edit them. (Not all of us are Emacs-capable.)