in my project, I want to refer to an other xcconfig file, located in InDesign SDK. As this SDK may be installed at different locations, depending upon the machine, I prefer to declare an environment variable for locating it.
Nest step is obviously to use variable (aptly named ID_CS5_SDK_DIR) in my xcconfig include directive.
Unfortunatly, when I try the simple
// InDesign sdk project build settings (based on common build settings)
#include "$(ID_CS5_SDK_ROOT)/build/mac/prj/_shared_build_settings/common.xcconfig"
XCode throws me a
[WARN]AutocatPlugin.xcconfig line 7: Unable to find included file "$(ID_CS5_SDK_ROOT)/build/mac/prj/_shared_build_settings/common.xcconfig"
How can I make it work ?
I've been trying to do this too and also came to the conclusion that it is not possible.
I once tried to achieve that and came to the conclusion that you can't. I would be happy if someone proves us it's possible though then delete my answer
It seems like .xcconfig files can only DEFINE and set value to environment variables (which prevail only throughout the build session) but not USE or evaluate environment variables.
Maybe it is because .xcconfig files serve as a base layer of build-settings, and are not parsed.
Unfortunately this is not possible, but instead of making one include the other, you can use two different xcconfig files per target. Just select one for the Project and one for the Target.
If you put the environment variable in /etc/config/launchd.conf and then reboot it will be accessible to the .xcconfig file.
Short Instructions for experienced users:
Edit the read-only file /etc/launchd.conf and add 'setenv VARIABLENAME /FOLDER/PATH' to the file, then reboot.
Steps For Inexperienced Users
Open Application/Utilities/Terminal, and entersudo nano /etc/launchd.conf
Create the Environment Variable by adding a line like setenv VARIABLENAME FOLDER/PATH and then pressing ENTER.
Save the file using Ctrl-O, Ctrl-M, (Possibly Ctrl-Y to overwrite), then Ctrl-X to exit the editor.
(Optional) type cat /etc/launchd.conf to see that your changes are present
Restart your computer. (Logoff doesn't work)
You can now access the variable in your .xcconfig file as$(VARIABLENAME)
Notes:
This creates a GLOBAL environment variable, accessible to all users. It probably doesn't make sense to set this to something in your home directory (e.g ~/MyFolder). If you do this, however, you need to use the full pathname, such as /Users/MyUserName/MyFolder).
References:
Stack Overflow - Setting Environment Variables in OSX
Stack Overflow - Are there any differences between /etc and /private /etc
Related
I have just set up MRTG server. Now It can get SNMP info from our router.in the first we create config file by using cfgmaker, everything is ok. We can get graph well. We have edit something on our config file about maxbytes or something like that. Afterthat we have just bring up new interface on our router. When we run cfgmaker again, it will create config file with new interface, but all thing that we edited, has been reset to default.
How can I create config file for specific interface that I can point out it. I don't want it run again for old interface that I create in previous. Please help me!!!
The cfgmaker utility will always generate a complete new configuration file. It will not modify an existing file.
If you have customisations that you need to be done, you have a few options.
Firstly, you could just cut and paste the new interface stanza from the newly generated configuration file into the old one.
Secondly, you could use the various options to cfgmaker to customise global options, or how the interfaces are filtered, labelled and identified; whether this is enough will depend on what your customisations are.
Thirdly, you could use a host template or interface template to fully customise the output, adding targets or options. Various templates are available at http://cfgmaker.steveshipway.org/ for download. This will require a little Perl coding knowledge.
I usually follow the unofficial Meteor FAQ on how to structure my codebase, but I can't figure out where I should put my global constants.
To give an example: I have some database entries with a constant GUID that I need to reference in many points of my app. So far I just attached the constants to the relevant collection, such that in collections/myCollectionWithGuids.coffee it would say:
#MyCollectionWithGuids = new Meteor.Collection "myCollectionWithGuids"
#MyCollectionWithGuids.CONSTANT_ID = "8e7c2fe3-6644-42ea-b114-df8c5211b842"
This approach worked fine, until I need to use it in the following snippet, located in client/views/myCollectionWithGuidsView.coffee, where it says:
Session.setDefault "selectedOption", MyCollectionWithGuids.CONSTANT_ID
...which is unavailable because the file is being loaded before the Collections are created.
So where should I put my constants then, such that they are always loaded first without hacking in a bunch of subdirectories?
You could rely on the fact that a directory names lib is always treated first when it comes to load order.
So I would probably advise you to organize your code as follow :
lib/collections/collection.js
client/views/view.js
In your particular use case this is going to be okay, but you might find cases when you have to use lib in your client directory as well and as the load order rules stack (subdirectories being loaded first), it will be loaded BEFORE the lib folder residing in your project root.
For the moment, the only way to have full control over the load order is to rely on the package API, so you would have to make your piece of code a local package of your app (living in the packages directory of your project root).
It makes sense because you seem to have a collection and a view somehow related, plus splicing your project into a bunch of collaborative local packages tends to be an elegant design pattern after all.
Creating a local package is really easy now that Meteor 0.9 provide documentation for the package.js API.
http://docs.meteor.com/#packagejs
I would put your collection definitions in a lib directory. File structure documentation explains that all files under the lib directory get loaded before any other files, which means your variable would be defined when you attempt to access it in your client-side code.
Generally speaking, you always want your collections to be defined before anything else in your application is loaded or executed, since your application will most likely heavily depend upon the use of the collection's cursor.
Given a build.sbt which is committed to a code repository, what is a general pattern which allows users to override setting values defined in this script?
On the surface, this appears to have been answered in Where should local settings (per user, and not version-controlled) go in newer (0.10+) versions of SBT?. The answer there is to simply define two scripts in the same directory -- build.sbt and local.sbt, and rely on the fact that sbt will combine these scripts together. This may work for augmenting values (i.e., appending lists), but I don't see how it works for overriding the script value, since if a setting's value is set in both scripts, I don't know which of the two values will survive after sbt has combined the scripts.
It could be that I'm missing something very simple.
I'd recommend using ~/.sbt/0.13 global directory where your .sbt files are processed during project load and after the other files in the project itself.
I found ~/.sbt/0.13/global.sbt a good place for global settings - the name always hints me for its purpose.
I have to execute some file but I don't know the path. The PATH variable contains the path to this file.
For example, this won't work in case user installs windows to non-standard folder or uses another drive:
nativeProcessStartupInfo.executable = new File("C:\\Windows\\System32\\cscript.exe");
Have you tried using environment variables?
The WINDIR variable holds the windows directory, default: C:\Windows\The SYSTEM variable holds the System32 folder, defaults to %WINDIR%\system32
I don't know how to access system variables in Flex, if it is possible. I'll look into it further.
This question's answer claims that it's impossible.
This third party library appears to support it, but I don't know how.
DOESN'T WORK:
You should be able to create the path using them, something like new File("%SYSTEM%\\cscript.exe");. I haven't tested this. Let me know if this doesn't work and I'll research it further.
How I make the package
I make the msdeploy package like this:
msdeploy.exe -verb:sync -source:iisApp=c:\content\ -dest:package=c:\pkg.zip
The c:\content directory has a single index.html file.
Result
The output looks like this:
Info: Adding package (package).
Info: Adding child iisApp (c:\content\).
Info: Adding child createApp (c:\content\).
Info: Adding child contentPath (c:\content\).
Info: Adding child dirPath (c:\content\).
Info: Adding child filePath (c:\content\index.html).
Total changes: 6 (6 added, 0 deleted, 0 updated, 0 parameters changed, 0 bytes copied)
If I extract the content of c:\pkg.zip into directory c:\pkg it looks like this:
archive.xml
systemInfo.xml
Content\c_C
Content\c_C\content
Content\c_C\content\index.html
If I dump the package like this:
msdeploy.exe -verb:dump -source:package=c:\pkg.zip -xml
I get:
<output>
<MSDeploy.iisApp>
<iisApp path="c:\content\">
<createApp
path="c:\content\"
isDest="False"
managedRuntimeVersion=""
enable32BitAppOnWin64=""
managedPipelineMode=""
applicationPool=""
appExists="True" />
<contentPath path="c:\content\">
<dirPath
path="c:\content\"
securityDescriptor="D:"
parentSecurityDescriptors=""
attributes="Directory">
<filePath
path="index.html"
size="0"
attributes="Archive"
lastWriteTime="07/07/2011 20:58:00"
securityDescriptor="D:" />
</dirPath>
</contentPath>
</iisApp>
</MSDeploy.iisApp>
</output>
How I want it to be
I don't want the package to depend upon the current location of the site files. I'm going to send the package to a customer, and I don't want any detailes about the packaging process to get shipped with the package. I want the content of the package c:\pkg.zip to be like this:
archive.xml
systemInfo.xml
Content\index.html
I want the package to be able to create an IIS application, so I need a virtual path. I also want to install the package into the default location. So the physical path also has to change. I want the dump to look something like this:
<output>
<MSDeploy.iisApp>
<iisApp path="Default Web Site\Site">
<createApp
path="Default Web Site\Site"
isDest="False"
managedRuntimeVersion=""
enable32BitAppOnWin64=""
managedPipelineMode=""
applicationPool=""
appExists="False" />
<contentPath path="c:\inetpub\wwwroot\site">
<dirPath
path="c:\inetpub\wwwroot\site"
securityDescriptor="D:"
parentSecurityDescriptors=""
attributes="Directory">
<filePath
path="index.html"
size="0"
attributes="Archive"
lastWriteTime="07/07/2011 20:58:00"
securityDescriptor="D:" />
</dirPath>
</contentPath>
</iisApp>
</MSDeploy.iisApp>
</output>
I have changed the iisApp and createApp provider path attributes to be Default Web Site\Site. And I changed the contentPath and dirPath provider path attributes to be c:\inetpub\wwwroot\site.
Questions
How can I accomplish this?
You need to look at MS Deploy replace rules, a useful feature well hidden on the MS Deploy Team Blog.
In your case, you will need to extend your command line with a pile of replace expressions, something like this:
msdeploy.exe
-verb:sync
-source:iisApp=c:\content\
-dest:package=c:\pkg.zip
-replace:objectName=iisApp,targetAttributeName=path,
replace="Default Website\Site"
-replace:objectName=createApp,targetAttributeName=path,
replace="Default Website\Site"
-replace:objectName=contentPath,targetAttributeName=path,
replace="c:\inetpub\wwwroot\site"
-replace:objectName=dirPath,targetAttributeName=path,match="^c:\content",
replace="c:\inetpub\wwwroot\site"
Running this should produce your desired output.
In the above sample, the first 3 replace rules match by tag name (objectName) and attribute name (targetAttributeName), and overwrites with the specified replace string.
The last replace rule will match all path attributes of all dirPath tags beginning with "c:\content" and will replace only that part of the attribute value with the replace string.
Finally, I haven't found a way to avoid having the package zip-file contain the original source folder names. The only workaround would be to package from a neutral, temporary location like "c:\site".
So the procedure is:
Copy your stuff to a neutral, temporary location.
Create your package from here.
Use the verb:dump to see the generated xml.
Create your package again with added replace rules for everything you want changed in the package.
Take a headache pill ;-)
I had more or less the same problems.
First things first:
The long deployment-machine-specific paths
To that effect, I used a trick found at http://sedodream.com/2013/01/13/WebPackagingFixingTheLongPathIssue.aspx
As suggested in the post, one can modify the desired (you can have several) .pubxml file under the Properties/PublishProfiles folder in your project. This is the approach I followed since it allowed me to customize the behavior per publishing profile.
If I'm not mistaken though, I believe you can apply the same modification to the {project-name}.wpp.targets file (which probably doesn't exists yet) on the project root directory. Changes here though, affect the web publishing pipeline (wpp) and thus all publishing profiles found in the project.
However...
This approach is just about to spoil your deployment when it comes time to replace your connection strings with those provided by your publishing profile. The reason: the above trick doesn't affect connection strings since they are being created automatically by the wpp at build time. Buh-huh!
The solution I found for that problem was twofold:
1.) Created a parameters.xml file where I manually declared the connection strings. Ok, maybe I copied them from the parameters.xml file within my package's .zip file since I was deploying to a package. That helped.
They look somegthing like this:
<parameter name="myConnection-Web.config Connection String" defaultValue="" tags="SqlConnectionString"
description="myConnection Connection String used in web.config by the application to access the database.">
<parameterEntry kind="XmlFile" scope="DeploymentPackage\\Web\.config$" match="/configuration/connectionStrings/add[#name='myConnection']/#connectionString" />
</parameter>
2.) Included the following line at the top of the same .pubxml file we modified earlier
<AutoParameterizationWebConfigConnectionStrings>false</AutoParameterizationWebConfigConnectionStrings>
And... Voilà!
Create ISS App
With the above approach hopefully you declared several parameters, including the connection strings.
When you create a package, however, regardless of wheter you created a parameters.xml or not, a *.SetParameters.xml template file is created for you. Within it you will see as the very first parameter the "IIS Web Application Name", which will default to whatever you inserted in your publishing profile. You can change that; to whatever you want.
Remember I said template before? I meant it; it's just a template. You're suppose to take that *.SetParameters.xml file and make as many copies of it as needed. What are they for? Environment related parameters. You could have a:
DEV.SetParameters.xml
QA.SetParameters.xml
Staging.SetParameters.xml
Production.SetParameters.xml
... and so on and so forth
and then use the parameters file best suited for the job (or the environment) like so:
{yourProjectName}.deploy.cmd /Y /M:{targetServer} [...] -setParamFile:QA.SetParameters.xml
or its equivalent MsDeploy command line of course.
Now, by default, the manifest created for you at build time, and stashed within your package under the archive.xml file, will use an iisApp provider first and foremost. This is good, cause this provider, unlike the createApp provider, will actually create the directory for you if it doesn't exist. At least according to this note from TechNet:
"Unlike the iisApp provider, if the physical folder for the new application does not exist, the createApp provider does not create a physical folder underneath the folder of the parent site; it only creates a reference in configuration to such a folder. If you want a physical folder created, you will have to create it manually before or after using createApp. For this reason, you should normally use the iisApp provider instead. The iisApp provider is the more appropriate choice because it uses the createApp provider as an initial step in a series of steps that include the creation of the application in configuration, the creation of a physical folder for the application if the folder does not exist, and the copying of content files into the folder of the new application."
I would be happy to include the links... but since I don't have 10+ points I'm allowed only one per post. Go figure! :)
So, in short...
... by the work done on the first part, you probably won't need to do much in order to have the folder created at deploy time in the target server.
In case you do need to override that though, you can either define your own manifest file and deploy off of it (a separate topic)... or you can follow #peter_raven advice and override its value using the -Replace rules from MsDeploy.
Either one would work as a charm.
The package prefix is removed by supplying the kind, scope, and match properties as shown below:
"msdeploy.exe" \
-verb:sync \
-source:iisApp="[Path to your website contents]" \
-declareParam:name="IIS Web Application Name",kind="ProviderPath",scope="IisApp",match="^C:\\path\\to\\your\\site\\folder",defaultValue="Default Web Site/SomeSite" \
-dest:package=[WebDeployPackageName].zip
I've managed to resolve a problem with manually defined connection strings while using the solution from #SkyFighter. Now one can use the auto-parameterization feature and have the connection string parameters with correct scopes.
Fortunately there is a place inside WPP to inject into. Unfortunately I had to use AfterTarget/BeforeTarget rather than SomeTargetDependsOn variables to narrow down the new target's placement.
And here is the target itself:
<Target Name="Replace_WebConfigsToAutoParmeterizeCS_TransformScope"
AfterTargets="PreAutoParameterizationWebConfigConnectionStrings"
BeforeTargets="AutoParameterizationWebConfigConnectionStringsCore"
Condition=" '$(EnableAddReplaceToUpdatePacakgePath)'=='true' ">
<ItemGroup>
<_WebConfigsToAutoParmeterizeCS>
<TransformScope>$([System.String]::Copy('%(TransformScope)').Replace('$([System.IO.Path]::GetFullPath($(WPPAllFilesInSingleFolder)))', '$(PackagePath)'))</TransformScope>
</_WebConfigsToAutoParmeterizeCS>
</ItemGroup>
</Target>
It is driven by the same variables as in the Sayed's sample for fixing long paths. So place this target anywhere those variables already available.
P.S. This trick/hack requires at least MSBuild v3.5 where metadata manipulation was first introduced.