I was using ASP.NET Web Forms and ASP.NET MVC for some period of time.
So <%= %> in views mean Response.Write(), <%: %> introduced in MVC adds html escaping.
In SqlDataSource control designer generates something like this ConnectionString="<%$ ConnectionStrings:FooConnectionString %>" and in repeater you use <%# Eval("") %> sytax.
My question is what exactly do <%$ %> and <%# %> tags, what methods they traslated into and how do they behave?
<%$ %> is the expression syntax.
There are some built in shortcuts for AppSettings, Resources and ConnectionStrings. You can also write your own.
<%# %> is the databinding expression syntax.
This is used in databound controls to resolve property values from the object being bound.
I clipped this text from a book (I can't remember which book) a while ago as I thought it explained the <%# %> syntax well -
Those of you familiar with classic ASP applications might think that
the <%# %> syntax looks very familiar. It is similar in purpose, but
you need to make sure that you don't confuse the two because doing so
could cause your application to function improperly. Whereas in ASP
(and ASP.NET), the <%= %> syntax causes whatever is inside the
brackets to be evaluated at render time, the <%# %> brackets unique to
ASP.NET are evaluated only during binding. As you will see later in
this section, the page and each bindable control on the page have a
DataBind() method. The expressions contained within the data binding
brackets (<%# %>) are evaluated only when the control's DataBind
method is invoked.
That only answers half your question, but Rob Stevenson-Leggett's excellent answer covers everything else. I just thought I'd add this by way of some further illustration.
I have written a blog post about the different types of expressions available in ASP.NET Web Forms:
Expressions vs. Statements, part 2: ASP.NET Code Block Types (internet archive)
It explains the following expression blocks:
<%$ %>
ASP.NET Expression Syntax, used to bind against application settings, connection strings, and resources.
<%# %>
ASP.NET Data-Binding syntax, only evaluated when calling a data binding method of the control.
<% %>
Code blocks, the code becomes part of RenderMethodDelegate. The code should be statements. Use Response.Write to output something.
<%= %>
Same as above, except the code should be a single expression. It will be wrapped in HtmlTextWrite.Write().
Related
I have been using ASP.NET for years, but I can never remember when using the # and = are appropriate.
For example:
<%= Grid.ClientID %>
or
<%# Eval("FullName")%>
Can someone explain when each should be used so I can keep it straight in my mind? Is # only used in controls that support databinding?
There are a couple of different 'bee-stings':
<%# - page directive
<%$ - resource access
<%= - explicit output to page
<%# - data binding
<%-- - server side comment block
Also new in ASP.Net 4:
<%: - writes out to the page, but with HTML encoded
Also new in ASP.Net 4.5:
<%#: - HTML encoded data binding
<%= %> is the equivalent of doing Response.Write("") wherever you place it.
<%# %> is for Databinding and can only be used where databinding is supported (you can use these on the page-level outside a control if you call Page.DataBind() in your codebehind)
Databinding Expressions Overview
Here's a great blog post by Dan Crevier that walks through a test app he wrote to show the differences.
In essence:
The <%= expressions are evaluated at render time
The <%# expressions are evaluated at DataBind() time and are not evaluated at all if DataBind() is not called.
<%# expressions can be used as properties in server-side controls. <%= expressions cannot.
I want to learn advanced and basic things about ASP.NET inline scripting like
<img src="<%= Page.ResolveUrl("~")%>Images/Logo.gif"/>
or
<asp:Label ID="lblDesc" runat="server" Text='<%#DataBinder.Eval(Container.DataItem,"Description")%>'></asp:Label>
And so on...
And, what's the difference between <% %> and <%# %> and such stuff?
Where can I find from basic to advanced implementation of those usages?
Check out this article for the specifics of the different inline tag options.
From the article:
<% ... %> -- The most basic inline tag,
basically runs normal code:
<%= ... %> -- Used for small chunks of
information, usually from objects and
single pieces of information
like a single string or int variable:
<%# ... %> -- Used for Binding Expressions;
such as Eval and Bind, most often
found in data controls like GridView,
Repeater, etc.:
<%$ ... %> -- Used for expressions, not code;
often seen with DataSources:
<%# ... %> -- This is for directive syntax;
basically the stuff you see at the top
your your aspx pages like control
registration and page declaration:
<%-- ... %> -- This is a server side comment,
stuff you don't want anyone without
code access to see:
In general, <%#..%> is used for preprocessing a template, such as when databinding, whereby the names of properties of the objects are not known at compile-time. If, for example, you have an ASP.NET Repeater object, and you databind a list of objects to it, this notation is used to pre-populate values that could not be set at any point except during the databind lifecycle.
The other notations, <%..%> and <%=..%> are more standard and you'll see these far more often than the other syntax previously discussed, especially if you use something like ASP.NET MVC instead of ASP.NET Web Forms. The syntax <%..%> executes arbitrary script inline, and nothing more, but allows you to write entire blocks of .NET code such as if statements, while loops, for loops, etc. The syntax <%=..%> is an evaluate-and-write syntax, and is rough equivalent of <% Response.Write([..].ToString()) %>. I.e., <%= myVal %> is the same as <% Response.Write(myVal.ToString()) %>
These syntaxes are basic ASP.NET knowledge.
I should know this by now, but I don't, and for some reason, I am not finding the answer on Google, so I thought I'd try here.
I know that <%= %> is the equivalent of Response.Write()
And I've seen <%# %> for databinding.
However, today I noticed something new, and even though I can see what it's doing, I am looking for the official documentation on this. In one of my web pages, I see
ConnectionString="<%$ ConnectionStrings:SomeConnectionString %>"
So what does <%$ %> do?
See this question:
In ASP.Net, what is the difference between <%= and <%#
In summary ,there are a several different 'bee-stings':
<%# - Page/Control/Import/Register directive
<%$ - Resource access and Expression building
<%= - Explicit output to page, equivalent to <% Response.Write( ) %>
<%# - Data Binding. It can only used where databinding is supported, or at the page level if you call Page.DataBind() in your code-behind.
<%-- - Server-side comment block
<%: - Equivalent to <%=, but it also HTMLEncode()s the output.
Used for expressions, not code; often seen with DataSources
http://msdn.microsoft.com/en-us/library/d5bd1tad.aspx
It's markup used to evaluate expressions rather than code.
I've programmed in both classic ASP and ASP.NET, and I see different tags inside of the markup for server side code.
I've recently come across a good blog on MSDN that goes over the difference between:
<%= (percentage together with equals sign) and
<%# (percent sign and hash/pound/octothorpe)
(<%# is evaluated only at databind, and <%= is evaluated at render), but I also see:
<%$ (percent and dollar sign) and
<%# (percent sign and at symbol).
I believe <%# loads things like assemblies and perhaps <%$ loads things from config files? I'm not too sure.
I was just wondering if anyone could clarify all of this for me and possibly explain why it's important to create so many different tags that seemingly have a similar purpose?
<% %> - is for inline code (especially logic flow)
<%$ %> - is for evaluating expressions (like resource variables)
<%# %> - is for Page directives, registering assemblies, importing namespaces, etc.
<%= %> - is short-hand for Response.Write (discussed here)
<%# %> - is used for data binding expressions.
<%: %> - is short-hand for Response.Write(Server.HTMLEncode()) ASP.net 4.0+
<%#: %> - is used for data binding expressions and is automatically HTMLEncoded.
<%-- --%> - is for server-side comments
You've covered 2 of them (<%# is evaluated only at databind, and <%= is evaluated at render), and the answer for "<%#" is that it's compiler directives (ie., stuff like what you'd put on a compiler's command line).
I don't know about "<%$".
I have been using ASP.NET for years, but I can never remember when using the # and = are appropriate.
For example:
<%= Grid.ClientID %>
or
<%# Eval("FullName")%>
Can someone explain when each should be used so I can keep it straight in my mind? Is # only used in controls that support databinding?
There are a couple of different 'bee-stings':
<%# - page directive
<%$ - resource access
<%= - explicit output to page
<%# - data binding
<%-- - server side comment block
Also new in ASP.Net 4:
<%: - writes out to the page, but with HTML encoded
Also new in ASP.Net 4.5:
<%#: - HTML encoded data binding
<%= %> is the equivalent of doing Response.Write("") wherever you place it.
<%# %> is for Databinding and can only be used where databinding is supported (you can use these on the page-level outside a control if you call Page.DataBind() in your codebehind)
Databinding Expressions Overview
Here's a great blog post by Dan Crevier that walks through a test app he wrote to show the differences.
In essence:
The <%= expressions are evaluated at render time
The <%# expressions are evaluated at DataBind() time and are not evaluated at all if DataBind() is not called.
<%# expressions can be used as properties in server-side controls. <%= expressions cannot.