I have an ASP.NET Web Application project that I am using to host a WCF Data Services (OData) project.
I went and changed the url from:
http://localhost/MyProject
to
http://localhost/v1/MyProject
after I did that I created a Virtual Directory for the new project URL.
Now when I run I get this error:
Unable to start debugging on the web server. The web server is not configured correctly. See help for common configuration errors. Running the web page outside of the debugger may provide further information.
I clicked help but it was no help (was IIS 6 level instructions, I have IIS 7). I did some googling and it was all fairly generic responses.
How can I get this working again? (Aside from revert to my old Url. Reverting works but I changed it for a very good reason.)
Your virtual directory need to point to the same scr directory you were originally debugging against.
Also, make sure the virtual directory is configured for Windows Authentication, which is required for debugging.
I had to go to my website in IIS and add a folder under it called v1. After I did that it all worked perfectly.
Related
I have project which don't have .sln file as well. I am trying to run but facing error.
I am trying to resolve this issue by going into IIS manager. IIS manager don't have list of sites and unable to add site.
Please give me solution.
Thanks
You are most likely using IIS Express while launching the program and that is why you don't see a website in IIS.
I think you want to enable directory browsing, so look here:
How to enable Directory browsing by default on IIS Express
Just a small side note: by careful with directory browsing on public websites as it can be a huge security risk.
I've written and ASP.net MVC web application that needs to be installed as a "normal" application (or as close to it as possible). By which I mean, I need to have a "double click on exe file and the webappp opens in default browser" behavior, or as close to that as possible.
Being used to Java, I stupidly thought that I could use and embedded webserver to run it, but after a bit of research (correct me if I'm wrong here) it seems this cannot be done (only ASP.net Core can do that, but I'm using the traditional .NET Framework) and the web app needs to be run in either IIS or IIS Express.
So, after more research, this page:
https://learn.microsoft.com/en-us/iis/extensions/using-iis-express/running-iis-express-from-the-command-line
seems to suggest that launching a site from a specific folder via IIS Express is possible, by using a command like:
iisexpress.exe /path:"C:\Program Files\MyWebsite\bin"
where the path above contains my compiled ASP.net MVC website.
This, however, doesn't seem to work. When I issue that command I get the following output:
c:\Program Files\IIS Express>iisexpress.exe /path:"C:\Program Files\MyWebsite\bin"
Copied template config file 'c:\Program Files\IIS Express\AppServer\applicationhost.config' to 'C:\Users\MyUser\AppData\Local\Temp\iisexpress\applicationhost20179188941639.config'
Updated configuration file 'C:\Users\MyUser\AppData\Local\Temp\iisexpress\applicationhost20179188941639.config' with given cmd line info.
Starting IIS Express ...
Successfully registered URL "http://localhost:8080/" for site "Development Web Site" application "/"
Registration completed
IIS Express is running.
Enter 'Q' to stop IIS Express
So basically IIS Express starts, but it's not running my website from the folder I specified, it runs some (presumebly) default empty website, called "Development Web Site". I checked some urls, and I can confirm that is not my website, but just an empty shell with no pages or anything else.
What am I missing here? How do you start a website in IIS Express via command line? Do I have to "register" the website first somehow?
EDIT:
After a bit more research, I found out I can register a website explicitly by doing:
appcmd.exe add site /name:MySite /physicalPath:"C:\Program Files\MyWebsite\bin" /bindings:http://localhost:8081
and then start it with:
iisexpress.exe /site:MySite
This however doesn't solve the problem: when I browse to the website via browser all I get are 404 errors, there's no content at all.
One thing I also must point out: since an ASP.net website is compiled into a DLL file, I don't understand how simpy registering/starting it using a path to a FOLDER would work... how would IIS Express understand which DLL to load the site from? Seems like there are some crucial pieces missing here...
After further tinkering, I figured it out. I was pointing to the /bin directory of the website. Instead, you have to point to the parent directory, the one that contains the Web.config file.
So, in my case, I changed:
iisexpress.exe /path:"C:\Program Files\MyWebsite\bin"
to:
iisexpress.exe /path:"C:\Program Files\MyWebsite"
and now it works correctly
I have just completed my website and I started working with IIS it works fine when I put all my file without published. I copy the whole website to wwwroot inside my folder as I said It works fine but when I tried to work without code behind page it didn't work I published website from VS. and I copy my published file to the same folder but it doesn't work.
I received this error:
Eval is not declared. It may be inaccessible due to its protection level.
I don't want to put my code behind page. How can I run my published pages?
First, when you publish your web project, their are no code behind pages.
Do this, set a directory and publish your site in it.
Now cmd-> intemgr->
site-> -> add web site->
give site name and select an application pool, then set the physical path to the directory where your application is published, if necessary change the port to something like 50 because 80 is a standard port for http. Hit ok. Your site is ready.
Please check in application pool that your application pool is set to .Net framework version V4.0 (i mean the version compatible to your app ).
just click to browser the site, please do check the uri you can see the port number also
So I have all the updated code, the entire solution builds. It works on everyone else's machine, however when I try and access localhost/extranet on my machine, it gives me this error:
HTTP Error 403.14 - Forbidden
Detail Error Info:
Module DirectoryListingModule
Notification ExecuteRequestHandler
Handler 0x00000000
Requested URL http://localhost:80/extranet/
Physical Path C:\svn\K2\trunk\appteam\web\Chatham.Web.UI.Extranet\
Logon Method Anonymous
Logon User Anonymous
Now I tried going into IIS7, and enabling directory browsing, this removed the error, but still didn't bring up my website. I also tried going in and disabling the default document, re-enabling it, everything, nothing worked. I've also restarted IIS a few times to no avail.
Any ideas?
It sounds like your IIS is not processing the routing rules for your application and is trying to find a default.aspx, index.htm, etc. Since it cannot, it is wanting to display the directory listings (which is why you were getting the 404.14).
I just checked my dev setup and I think that your AppPool has to be set on Integrated as opposed to Classic on the Managed Pipeline for the AppPool. I have ran into this before, there may be ways to use the Classic Pipeline, but this would/should be the quickest way to resolve your issue. To check/change the pipeline mode, click on Application Pools from the menu on the left side of IIS, find your AppPool and look in the managed pipeline column. If it is set to Classic -> Right click the AppPool, choose basic settings, then change the dropdown from Classic to Integrated.
If I am incorrect, someone please feel free to correct me on this in the comments.
Edit - Just to add, you can run an MVC app in the Classic Pipeline mode, but you have to do the IIS 6 tricks to get it to work properly. Mainly, you need to turn on wildcard script mapping for MVC to work in Classic mode, If not it expects an .aspx file (or similar) to exist for it to handle the execution pipeline over to .NET from IIS.
Causes this error is removed Global.asax file from your root directory of your site.
To solve this problem add a Global.asax file to your project.
See here: How to add Global.asax file to ASP.NET MVC4 project
In IIS, you need to find out which app pool your application is running from. Just right click the web application under Sites>Manage Web Site>Advanced Settings. The first property should be the app pool.
Now, click Application Pools. You should see a column called "Identity". Add that user to the ACL of the C:\svn\K2\trunk\appteam\web\Chatham.Web.UI.Extranet\ directory. If it just says 'ApplicationPoolIdentity', it can be a little tricky figuring out the user. If it's just running under DefaultAppPool, you can use IIS AppPool\DefaultAppPool.
My solution was because I didn't have ASP.NET installed via "Turn Windows Features on and Off" so it was simple. I figured it out by enabling directory browser and trying to go to my views folder which then gave a more descriptive answer and pretty much said that there was a problem with a module because ASP.NET is not properly installed. It then dawned on my to go and install it.
Change the 'start page' by right click on the page and select 'Set as Start Page' that you want to open first when the web application starts first. This might solve your problem. :)
Also make sure in IIS Application Pool settings that Enabled 32-bit Applications under Advanced Settings is set to FALSE. I spent hours trying to fix this and that was my issue. Windows Server 2012 IIS 8.5
I solved this problem by setting exact .net framework. My website was using v4.0 version of .net.
Workaround to handle the problem:
Open command line as an administrator
Go to directory "C:\Windows\Microsoft.NET\Framework\v4.0.30319"
Execute the following: aspnet_regiis.exe -i
Open IIS and change Pipeline Mode of Your application to Integrated
Hope this helps
In my case the HTTP Redirection feature was missing on the server (with IIS 10).
Adding the feature resolved the issue and the site started to load fine.
My host is having issues getting my MVC3 app to work on their server, so I though I'd check it out myself. Until now I've been too busy developing under the built in server to worry about IIS, but today I tried my first deployment to the host with no joy. Then I tried one to my local IIS, with no joy. Then I tried telling VS to use IIS for debugging, to maybe resolve some local issues, with no joy.
What steps and configuration are required to use local IIS 7.5 to debug an MVC3 application?
EDIT: Going through a browser, after clearing up a permission problem for my Windows user on Temp ASP.NET Files, I now site with a I get a HTTP Error 403 (Forbidden), but the occassional basic auth login dialogue. Here I have tried a Forms auth user, my normal Windows user, and my Windows admin user, all to no avail.
When I try and debug under VS, I get a 500, internal error.
THE PLOT THICKENS: When I enable directory browsing on the site, I get a proper directory listing for the site root url. This suggests the the MVC3 routing is not working, but why not?
If you're getting a directory listing that means there's not a default file set (for IIS6). It usually means the request wasn't routed to IIS to deal with. thing are slightly different with II7 & it's integrated pipeline.
Simon