Is PUT/DELETE idempotent with REST automatic? - http

I am learning about REST and PUT/DELETE, I have read that both of those (along with GET) is idempotent meaning that multiple requests put the server into the same state.
Does a duplicate PUT/DELETE request ever leave the web browser (when using XMLHttpRequest)? In other words, will the server be updating the same database record for each PUT request, or will duplicate requests be ignored automatically?
If yes, how is using PUT or DELETE different from just using POST?
I read an article which suggested that RESTful web services were the way forward. Is there any particular reason why HTML5 forms do not support PUT/DELETE methods?

REST is just a design structure for data access and manipulation. There's no set-in-stone rules for how a server must react to data requests.
That being said, typically a REST request of PUT or DELETE would be as follows:
DELETE /item/10293
or
PUT /item/23848
foo=bar
fizz=buzz
herp=derp
The requests given are associated with a specific ID. Because of this, telling the server to delete the same ID 15 times will end up with pretty much the same result as calling it once, unless there's some sort of re-numbering going on.
With the PUT request, telling the server to update a specific item to specific values will also lead to the same result.
A case where a command would be non-idempotent would typically involve some sort of relative value:
DELETE /item/last
Calling that 15 times would likely remove 15 items, rather than the same last item. An alternative using HTTP properly might look like:
POST /item/last?action=delete
Again, REST isn't an official spec, it's just a structure with some common qualities. There are many ways to implement a RESTful structure.
As for HTML5 forms supporting PUT & DELETE, it's really up to the browsers to start supporting different methods rather than the spec itself. If all the browsers started implementing different methods for form submission, I'm sure they'd be added to the spec.
With the web going the way it is, a good RESTful implementation is liable to also incorporate some form of AJAX anyway, so to me it seems largely unnecessary.

Does a duplicate PUT/DELETE request ever leave the web browser (when using XMLHttpRequest)?
Yeah, sure. Idempotence is only a convention and it's not enforced. If you make a request, duplicate or not, it will run through.
In other words, will the server be updating the same database record for each PUT request, or will duplicate requests be ignored automatically?
If it conforms to REST it should update the same database record twice, for example running UPDATE user SET name = 'John' twice. There is not guarantee what it will or will not do though, it depends on how it's implemented.
If yes, how is using PUT or DELETE different from just using POST?
It's just a convention. PUT and DELETE requests may or may not be handled differently from POST in the site's code.
I read an article which suggested that RESTful web services were the way forward. Is there any particular reason why HTML5 forms do not support PUT/DELETE methods?
I'm not really sure, to be honest. You can work around this by using a hidden <input> field called _method or similar and set it to DELETE or PUT, and then handle that server side.

PUT operation are idempotent but not safe operation. On success if PUT operation is repeated it will not insert duplicate records. Repeat PUT operation in case of NetworkFailure errors after verifying conditional headers like If-unmodified-since and/or if-match. Don't repeat in case of 4XX or 5XX error codes.

REST aims to establish a syntax convention regarding the HTTP method to use; each back end is free to implement anything they want, devs could break the convention but will cause unnecessary confusion if used by others not involved in the development.
For DELETE, if you delete some item with an ID, the server should responded it's deleted; if delete again, it's no more there so server responded "already removed", also good because your purpose is fulfilled. Same for PUT, because you provide the new status of your resource, the status yet-to-be; if it's already updated, mission complete and it's the same for the client.

Related

Is POST the correct HTTP verb for resources that are produced by but not stored by the server?

Perhaps a partial duplicate of What is the correct http verb for a Download in a REST API? , though that is referring to a file download specifically.
In terms of CRUD operations, POST is the recommended HTTP verb for creating a resource. Does this still apply to creating resources, even if those resources are not persisted on the server? (i.e. stored in a database or similar) For example, generating some code based on code the client sent or converting a file and returning it to the client.
With such types of functionality, the server has indeed "created" something, though only in passing, returning or streaming it to the client, and not storing it in the traditional CRUD sense. I've always used POST for such functionality, but now I'm starting to double guess myself and think that those could have been GET endpoints the whole time.
Seems like a weird gray area in which neither HTTP verbs GET or POST completely match.
Is POST the correct HTTP verb for resources that are produced by but not stored by the server?
Yes - or alternatively, it's the least incorrect choice to use.
POST serves many useful purposes in HTTP, including the general purpose of “this action isn’t worth standardizing.” -- Fielding, 2009
In 2020, the HTTP-WG adopted a proposal to define a method token for "GET with a body", which would give as an alternative to POST when we want to indicate to general purpose components that the request has safe semantics, so there should eventually be some registered method that is a better fit.
There is no gray area here.
If the state of the server changes, use an unsafe method like POST. If it does not, you can use a safe methof like GET, as long as you stay within the documented limitations of GET (no request body).
If you're looking for a safe method that does take a request body, you may want to look at https://datatracker.ietf.org/doc/draft-ietf-httpbis-safe-method-w-body/.

What is the usefulness of PUT and DELETE HTTP request methods?

I've never used PUT or DELETE HTTP Request methods. My tendency is to use GET when the state of the system (my application or website) may not be affected (like a product listing) and to use POST when it is affected (like placing an order). Aren't those two always sufficient, or am I missing something?
DELETE is for deleting the request resource:
The DELETE method requests that the origin server delete the resource identified by the Request-URI. This method MAY be overridden by human intervention (or other means) on the origin server. The client cannot be guaranteed that the operation has been carried out, even if the status code returned from the origin server indicates that the action has been completed successfully …
PUT is for putting or updating a resource on the server:
The PUT method requests that the enclosed entity be stored under the supplied Request-URI. If the Request-URI refers to an already existing resource, the enclosed entity SHOULD be considered as a modified version of the one residing on the origin server. If the Request-URI does not point to an existing resource, and that URI is capable of being defined as a new resource by the requesting user agent, the origin server can create the resource with that URI …
For the full specification visit:
http://www.w3.org/Protocols/rfc2616/rfc2616-sec9.html
Since current browsers unfortunately do not support any other verbs than POST and GET in HTML forms, you usually cannot utilize HTTP to it's full extent with them (you can still hijack their submission via JavaScript though). The absence of support for these methods in HTML forms led to URIs containing verbs, like for instance
POST http://example.com/order/1/delete
or even worse
POST http://example.com/deleteOrder/id/1
effectively tunneling CRUD semantics over HTTP. But verbs were never meant to be part of the URI. Instead HTTP already provides the mechanism and semantics to CRUD a Resource (e.g. an order) through the HTTP methods. HTTP is a protocol and not just some data tunneling service.
So to delete a Resource on the webserver, you'd call
DELETE http://example.com/order/1
and to update it you'd call
PUT http://example.com/order/1
and provide the updated Resource Representation in the PUT body for the webserver to apply then.
So, if you are building some sort of client for a REST API, you will likely make it send PUT and DELETE requests. This could be a client built inside a browser, e.g. sending requests via JavaScript or it could be some tool running on a server, etc.
For some more details visit:
http://martinfowler.com/articles/richardsonMaturityModel.html
Are the PUT, DELETE, HEAD, etc methods available in most web browsers?
Why are there no PUT and DELETE methods in HTML forms
Should PUT and DELETE be used in forms?
http://amundsen.com/examples/put-delete-forms/
http://www.quora.com/HTTP/Why-are-PUT-and-DELETE-no-longer-supported-in-HTML5-forms
Using HTTP Request verb such as GET, POST, DELETE, PUT etc... enables you to build RESTful web applications. Read about it here: http://en.wikipedia.org/wiki/Representational_state_transfer
The easiest way to see benefits from this is to look at this example.
Every MVC framework has a Router/Dispatcher that maps URL-s to actionControllers.
So URL like this: /blog/article/1 would invoke blogController::articleAction($id);
Now this Router is only aware of the URL or /blog/article/1/
But if that Router would be aware of whole HTTP Request object instead of just URL, he could have access HTTP Request verb (GET, POST, PUT, DELETE...), and many other useful stuff about current HTTP Request.
That would enable you to configure application so it can accept the same URL and map it to different actionControllers depending on the HTTP Request verb.
For example:
if you want to retrive article 1 you can do this:
GET /blog/article/1 HTTP/1.1
but if you want to delete article 1 you will do this:
DELETE /blog/article/1 HTTP/1.1
Notice that both HTTP Requests have the same URI, /blog/article/1, the only difference is the HTTP Request verb. And based on that verb your router can call different actionController. This enables you to build neat URL-s.
Read this two articles, they might help you:
Symfony 2 - HTTP Fundamentals
Symfony 2 - Routing
These articles are about Symfony 2 framework, but they can help you to figure out how does HTTP Requests and Responses work.
Hope this helps!
Although I take the risk of not being popular I say they are not useful nowadays.
I think they were well intended and useful in the past when for example DELETE told the server to delete the resource found at supplied URL and PUT (with its sibling PATCH) told the server to do update in an idempotent manner.
Things evolved and URLs became virtual (see url rewriting for example) making resources lose their initial meaning of real folder/subforder/file and so, CRUD action verbs covered by HTTP protocol methods (GET, POST, PUT/PATCH, DELETE) lost track.
Let's take an example:
/api/entity/list/{id} vs GET /api/entity/{id}
/api/entity/add/{id} vs POST /api/entity
/api/entity/edit/{id} vs PUT /api/entity/{id}
/api/entity/delete/{id} vs DELETE /api/entity/{id}
On the left side is not written the HTTP method, essentially it doesn't matter (POST and GET are enough) and on the right side appropriate HTTP methods are used.
Right side looks elegant, clean and professional. Imagine now you have to maintain a code that's been using the elegant API and you have to search where deletion call is done. You'll search for "api/entity" and among results you'll have to see which one is doing DELETE. Or even worse, you have a junior programmer which by mistake switched PUT with DELETE and as URL is the same shit happened.
In my opinion putting the action verb in the URL has advantages over using the appropriate HTTP method for that action even if it's not so elegant. If you want to see where delete call is made you just have to search for "api/entity/delete" and you'll find it straight away.
Building an API without the whole HTTP array of methods makes it easier to be consumed and maintained afterwards
Safe Methods : Get Resource/No modification in resource
Idempotent : No change in resource status if requested many times
Unsafe Methods : Create or Update Resource/Modification in resource
Non-Idempotent : Change in resource status if requested many times
According to your requirement :
1) For safe and idempotent operation (Fetch Resource) use --------- GET METHOD
2) For unsafe and non-idempotent operation (Insert Resource) use--------- POST METHOD
3) For unsafe and idempotent operation (Update Resource) use--------- PUT METHOD
3) For unsafe and idempotent operation (Delete Resource) use--------- DELETE METHOD
See the accepted answer from #Gordon, the key point being simply this:
PUT and DELETE are specific verbs with a meaning, that instruct the server to do something specific and how the instruction should be handled.
OK standards and semantics are great but what real use is DELETE to me if all I want to do is somehow run code to delete something from a database?
So what if we say, "OK but it's easier for me to just do a delete by issuing a GET to my URI that has a path /api/entity/delete/{id} (as suggested in the answer by #Bogdan). OK so let's look at the definition of GET:
The GET method means retrieve whatever information (in the form of an
entity) is identified by the Request-URI
Source - W3C standards - https://www.w3.org/Protocols/rfc2616/rfc2616-sec9.html
If you use GET for a DELETE you are clearly misusing the method according to its standard definition.
Alright so let's further say 'OK but that doesn't really matter because it's just more practical for a developer to read a URI somewhere that uses a GET method and reads /api/entity/delete/{id} instead of having a DELETE method that deletes resources having the same signature as a GET method that retrieves, so that the developer understands that's meant for deletion. Let's consider a well structured DELETE method signature (example is for .NET Core 5):
// DELETE: api/TodoItems/5
[HttpDelete("{id}")]
public async Task<IActionResult> DeleteTodoItem(long id)
{
This will not respond to a get request, (so for example, accidental deletion instead of retrieval when making a call to the API is more protected - the developer has to explicitly perform a DELETE request to the API). And we have a very clear, well structured and named API operation that's clear and highly discoverable by a developer or even automated tooling (e.g. a developer can now search specifically for any occurrence of DELETE in code, or for the method name which clearly indicates the DELETE). And what's more, this pattern conforms to a generally accepted standard for a 'RESTFUL' API that should render the API more broadly recognisable and interpretable to developers (and potentially any automated tooling).
OK, that's nice, but what's the real difference in making it a DELETE? Why even use DELETE instead of GET? My operation is deleting something from the database, why should my web server care? OK, let's think about the definition of DELETE:
9.7 DELETE - The DELETE method requests that the origin server delete the resource identified by the Request-URI. This method MAY be
overridden by human intervention (or other means) on the origin
server.
So now, if we're specifying a delete, we have the potential for specific behaviour on the server that potentially allows for reversing a delete action by manual or automatic intervention. In a particular use case, that could be significant.
OK well DELETE works for me then, but why use PUT? For example it's more convenient if I just make an 'upsert' method that uses POST, and update the resource if it exists or create it if it doesn't
I personally typically do this when I"m implementing an API that effects operations against a database, although again there is specific meaning to PUT i.e. that it specifically indicates updating of a resource, while POST indicates creation, so using POST for both creating and updating is counter-standard. My own view is that a REST API is a case when I typically view the practicality of upsert functionality as being more important that strict use of the correct verb for adds versus insert, but I could be missing something here.
Use of PUT outside of a REST api could be more significant for practical purposes, for example if we're performing an update operation where the server can potentially clear any cacheing by understanding that the resource has been updated (which is more significant if our resource is a whole document, for example). There may be some practical advantages I haven't considered when PUT is utilised inside a restful API for an update operation.
The standard definition for POST states that a POST success response SHOULD be 201 (created), and not just the generic '200 OK', so that we're able to correctly interpret that resource creation is explicitly successful. That response isn't appropriate for an update operation but there's no 'MUST' specified in the standard for the response code. It's certainly common for developers to use POST for an upsert and return 200 (OK) on success, whether it's a creation or an update.
The standard for PUT is more strict, and specifies that any unexpected creation of a resource when attempting an update MUST be indicated via a 201 response code. This can occur if no existing resource exists at the specified URI. The standard explains that if we use PUT we get clearer feedback on whether the result of our attempted update operation is what we expected.
From the W3C standard:
[if a put] does not point to an existing resource, and that URI is
capable of being defined as a new resource by the requesting user
agent, the origin server can create the resource with that URI. If a
new resource is created, the origin server MUST inform the user agent
via the 201 (Created) response. If an existing resource is modified,
either the 200 (OK) or 204 (No Content) response codes SHOULD be sent
to indicate successful completion of the request.
PUT
The PUT method is used whenever you need to change the resource. The resource, which is already a part of resource collection. One thing to note here is that PUT method modifies the entire resource whereas PATCH method is used to modify the necessary part of the resource or data.
DELETE
As the name says, the DELETE request method is used to delete the specified resource. It requests that the origin server delete the resource identified by the Request-URL.
I hope this simple definitions help.

Why is using a HTTP GET to update state on the server in a RESTful call incorrect?

OK, I know already all the reasons on paper why I should not use a HTTP GET when making a RESTful call to update the state of something on the server. Thus returning possibly different data each time. And I know this is wrong for the following 'on paper' reasons:
HTTP GET calls should be idempotent
N > 0 calls should always GET the same data back
Violates HTTP spec
HTTP GET call is typically read-only
And I am sure there are more reasons. But I need a concrete simple example for justification other than "Well, that violates the HTTP Spec!". ...or at least I am hoping for one. I have also already read the following which are more along the lines of the list above: Does it violate the RESTful when I write stuff to the server on a GET call? &
HTTP POST with URL query parameters -- good idea or not?
For example, can someone justify the above and why it is wrong/bad practice/incorrect to use a HTTP GET say with the following RESTful call
"MyRESTService/GetCurrentRecords?UpdateRecordID=5&AddToTotalAmount=10"
I know it's wrong, but hopefully it will help provide an example to answer my original question. So the above would update recordID = 5 with AddToTotalAmount = 10 and then return the updated records. I know a POST should be used, but let's say I did use a GET.
How exactly and to answer my question does or can this cause an actual problem? Other than all the violations from the above bullet list, how can using a HTTP GET to do the above cause some real issue? Too many times I come into a scenario where I can justify things with "Because the doc said so", but I need justification and a better understanding on this one.
Thanks!
The practical case where you will have a problem is that the HTTP GET is often retried in the event of a failure by the HTTP implementation. So you can in real life get situations where the same GET is received multiple times by the server. If your update is idempotent (which yours is), then there will be no problem, but if it's not idempotent (like adding some value to an amount for example), then you could get multiple (undesired) updates.
HTTP POST is never retried, so you would never have this problem.
If some form of search engine spiders your site it could change your data unintentionally.
This happened in the past with Google's Desktop Search that caused people to lose data because people had implemented delete operations as GETs.
Here is an important reason that GETs should be idempotent and not be used for updating state on the server in regards to Cross Site Request Forgery Attacks. From the book: Professional ASP.NET MVC 3
Idempotent GETs
Big word, for sure — but it’s a simple concept. If an
operation is idempotent, it can be executed multiple times without
changing the result. In general, a good rule of thumb is that you can
prevent a whole class of CSRF attacks by only changing things in your
DB or on your site by using POST. This means Registration, Logout,
Login, and so forth. At the very least, this limits the confused
deputy attacks somewhat.
One more problem is there. If GET method is used , data is sent in the URL itself . In web server's logs , this data gets saved somewhere in the server along with the request path. Now suppose that if someone has access to/reads those log files , your data (can be user id , passwords , key words , tokens etc. ) gets revealed . This is dangerous and has to be taken care of .
In server's log file, headers and body are not logged but request path is . So , in POST method where data is sent in body, not in request path, your data remains safe .
i think that reading this resource:
http://www.servicedesignpatterns.com/WebServiceAPIStyles could be helpful to you to make difference between message API and resource api ?

Is it dangerous if a web resource POSTs to itself?

While reading some articles about writing web servers using Twisted, I came across this page that includes the following statement:
While it's convenient for this example, it's often not a good idea to
make a resource that POSTs to itself; this isn't about Twisted Web,
but the nature of HTTP in general; if you do this, make sure you
understand the possible negative consequences.
In the example discussed in the article, the resource is a web resource retrieved using a GET request.
My question is, what are the possible negative consequences that can arrive from having a resource POST to itself? I am only concerned about the aspects related to the HTTP protocol, so please ignore the fact that I mentioned about Twisted.
The POST verb is used for making a new resource in a collection.
This means that POSTing to a resource has no direct meaning (POST endpoints should always be collections, not resources).
If you want to update your resource, you should PUT to it.
Sometimes, you do not know if you want to update or create the resource (maybe you've created it locally and want to create-or-update it). I think that in that case, the PUT verb is more appropriate because POST really means "I want to create something new".
There's nothing inherently wrong about a page POSTing back to itself - in fact, many of the widely-used frameworks (ASP.NET, etc.) use that method to handle various events that happen on the client - some data is posted back to the same page where the server processes it and sends a new reponse.

Which HTTP methods match up to which CRUD methods?

In RESTful style programming, we should use HTTP methods as our building blocks. I'm a little confused though which methods match up to the classic CRUD methods. GET/Read and DELETE/Delete are obvious enough.
However, what is the difference between PUT/POST? Do they match one to one with Create and Update?
Create = PUT with a new URI
POST to a base URI returning a newly created URI
Read = GET
Update = PUT with an existing URI
Delete = DELETE
PUT can map to both Create and Update depending on the existence of the URI used with the PUT.
POST maps to Create.
Correction: POST can also map to Update although it's typically used for Create. POST can also be a partial update so we don't need the proposed PATCH method.
The whole key is whether you're doing an idempotent change or not. That is, if taking action on the message twice will result in “the same” thing being there as if it was only done once, you've got an idempotent change and it should be mapped to PUT. If not, it maps to POST. If you never permit the client to synthesize URLs, PUT is pretty close to Update and POST can handle Create just fine, but that's most certainly not the only way to do it; if the client knows that it wants to create /foo/abc and knows what content to put there, it works just fine as a PUT.
The canonical description of a POST is when you're committing to purchasing something: that's an action which nobody wants to repeat without knowing it. By contrast, setting the dispatch address for the order beforehand can be done with PUT just fine: it doesn't matter if you are told to send to 6 Anywhere Dr, Nowhereville once, twice or a hundred times: it's still the same address. Does that mean that it's an update? Could be… It all depends on how you want to write the back-end. (Note that the results might not be identical: you could report back to the user when they last did a PUT as part of the representation of the resource, which would ensure that repeated PUTs do not cause an identical result, but the result would still be “the same” in a functional sense.)
I Was searching for the same answer, here is what IBM say.
IBM Link
POST Creates a new resource.
GET Retrieves a resource.
PUT Updates an existing resource.
DELETE Deletes a resource.
Right now (2016) the latest HTTP verbs are GET, POST, PATCH, PUT and DELETE
Overview
HTTP GET - SELECT/Request
HTTP PUT - UPDATE
HTTP POST - INSERT/Create
HTTP PATCH - When PUTting a complete resource representation is cumbersome and utilizes more bandwidth, e.g.: when you have to update partially a column
HTTP DELETE - DELETE
Hope this helps!
If you are interested on designing REST APIs this is an ansewome reading to have! website online version github repository
There's a great youtube video talk by stormpath with actually explains this, the URL should skip to the correct part of the video:
stormpath youtube video
Also it's worth watch it's over an hour of talking but very intersting if your thinking of investing time in building a REST api.
It depends on the concrete situation.. but in general:
PUT = update or change a concrete resource with a concrete URI of the resource.
POST = create a new resource under the source of the given URI.
I.e.
Edit a blog post:
PUT:
/blog/entry/1
Create a new one:
POST:
/blog/entry
PUT may create a new resource in some circumstances where the URI of the new ressource is clear before the request.
POST can be used to implement several other use cases, too, which are not covered by the others (GET, PUT, DELETE, HEAD, OPTIONS)
The general understanding for CRUD systems is GET = request, POST = create, Put = update, DELETE = delete
The building blocks of REST are mainly the resources (and URI) and the hypermedia. In this context, GET is the way to get a representation of the resource (which can indeed be mapped to a SELECT in CRUD terms).
However, you shouldn't necessarily expect a one-to-one mapping between CRUD operations and HTTP verbs.
The main difference between PUT and POST is about their idempotent property. POST is also more commonly used for partial updates, as PUT generally implies sending a full new representation of the resource.
I'd suggest reading this:
http://roy.gbiv.com/untangled/2009/it-is-okay-to-use-post
http://roy.gbiv.com/untangled/2008/rest-apis-must-be-hypertext-driven
The HTTP specification is also a useful reference:
The PUT method requests that the
enclosed entity be stored under the
supplied Request-URI.
[...]
The fundamental difference between the
POST and PUT requests is reflected in
the different meaning of the
Request-URI. The URI in a POST request
identifies the resource that will
handle the enclosed entity. That
resource might be a data-accepting
process, a gateway to some other
protocol, or a separate entity that
accepts annotations. In contrast, the
URI in a PUT request identifies the
entity enclosed with the request --
the user agent knows what URI is
intended and the server MUST NOT
attempt to apply the request to some
other resource. If the server desires
that the request be applied to a
different URI,
Generally speaking, this is the pattern I use:
HTTP GET - SELECT/Request
HTTP PUT - UPDATE
HTTP POST - INSERT/Create
HTTP DELETE - DELETE
The Symfony project tries to keep its HTTP methods joined up with CRUD methods, and their list associates them as follows:
GET Retrieve the resource from the server
POST Create a resource on the server
PUT Update the resource on the server
DELETE Delete the resource from the server
It's worth noting that, as they say on that page, "In reality, many modern browsers don't support the PUT and DELETE methods."
From what I remember, Symfony "fakes" PUT and DELETE for those browsers that don't support them when generating its forms, in order to try to be as close to using the theoretically-correct HTTP method even when a browser doesn't support it.

Resources