I am learning R and followed the instructions to program R using Visual Studio Code. I then tried to run the following line of code to learn how to read data.
dat <- read.table("d.data")
View(dat)
where d.data is a data file. I received the following error:
cannot open file '...\.vscode-R/request.log': Permission denied.
I tried using the "Give Access To" command from right-clicking the file in File Explorer, however, I don't think it did anything. How do I grant the program/terminal permission to open the file? It may be significant to note that running the same commands using the radian console works without any issues (I get the data outputted in a separate window).
I found a workaround for this issue by adjusting these settings in VSCode:
"r.alwaysUseActiveTerminal": true,
"r.bracketedPaste": true,
Then, by calling radian in an opened cmd terminal, I was able to load everything without any issues
I wanted to run this example script: http://mazamascience.com/WorkingWithData/?p=912 from Windows command line. So I opened the command line and typed Rscript tryCatch.R 1. However, I keep getting the error message Error: R not found. I did set the PATH environment variable as C:\Programme\R\R-3.0.1\bin. If I just type R.exe, it does start R, but it cannot find the packages that are to be loaded at start (e.g. package 'utils' in options<"defaultPackages"> was not found). I guess I have to set another path to the libraries somewhere, but I haven't got any idea where to do this.
UPDATE: After explicitly typing PATH C:\Programme\R\R-3.0.1\bin (rather than just adding this to the value of the environment variable PATH) it seems that R is found. However, a new problem occurs: In normalizePath<path.expand(path), winslash, mustWork>: path[2] = "C:/Programme/R/R-3.0.1/library": Access denied, the same than for the methods library. Then: Calls: .First ... library -> .getRequiredPackages2 -> library -> normalizePath Execution stopped. I'm using Windows 7 and I do have administrator rights.
Rscript is very handy (R CMD BATCH is the old way to ) specially under windows, But generally under I create a batch file to avoid all path's headache.
For example say launcher.bat:
#echo off
C:
PATH C:\Programme\R\R-3.0.1\bin;%path%
cd PATH_TO_YOUR_RSCRIPT
Rscript tryCatch.R 1
pause
And open a console(using cmd) , go where you have stored your launcher.bat and launch it. Or from the R cosnole using shell:
shell('path_to_launcher\launcher.bat')
I've found out that it was a language-specific problem on Windows 7, similar to what is described here: https://stat.ethz.ch/pipermail/r-help/2011-May/276932.html
After changing PATH to C:\Program Files\R\R-3.0.1\bin the script is properly executed from the command prompt.
Thanks to everyone who tried to help!
I ran into this problem under windows 7, apparently, when setting environment variables>user variables the path is not added into the PATH, so the user must add this path in system variables > PATH
at the end just add the path to your .EXE files and voila.
I need some Powershell advice.
I need to install an application's MSP update file on multiple Win08r2 servers. If I run these commands locally, within the target machine's PS window, it does exactly what I want it to:
$command = 'msiexec.exe /p "c:\test\My Application Update 01.msp" REBOOTPROMPT=S /qb!'
invoke-wmimethod -path win32_process -name create -argumentlist $command
The file being executed is located on the target machine
If I remotely connect to the machine, and execute the two commands, it opens two x64 msiexec.exe process, and one msiexec.exe *32 process, and just sits there.
If I restart the server, it doesn't show that the update was installed, so I don't think it's a timing thing.
I've tried creating and remotely executing a PS1 file with the two lines, but that seems to do the same thing.
If anyone has advice on getting my MSP update installed remotely, I'd be all ears.
I think I've included all the information I have, but if something is missing, please ask questions, and I'll fill in any blanks.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
My process for this is:
Read a CSV for server name and Administrator password
Create a credential with the password
Create a new session using the machine name and credential
Create a temporary folder to hold my update MSP file
Call a PS1 file that downloads the update file to the target server
>>> Creates a new System.Net.WebClient object
>>> Uses that web client object to download from the source to the location on the target server
Call another PS1 file that applies the patch that was just downloaded –>> This is where I’m having issues.
>>> Set the variable shown above
>>> Execute the file specified in the variable
Close the session to the target server
Move to the next server in the CSV…
If I open a PS window and manually set the variable, then execute it (as shown above in the two lines of code), it works fine. If I create a PS1 file on the target server, containing the same two lines of code, then right click > ‘Run With PowerShell’ it works as expected / desired. If I remotely execute my code in PowerGUI, it returns a block of text that looks like this, then just sits there. RDP’d into the server, the installer never launches. My understanding of the “Return Value” value is that “0″ means the command was successful.
PSComputerName : xx.xx.xx.xx
RunspaceId : bf6f4a39-2338-4996-b75b-bjf5ef01ecaa
PSShowComputerName : True
__GENUS : 2
__CLASS : __PARAMETERS
__SUPERCLASS :
__DYNASTY : __PARAMETERS
__RELPATH :
__PROPERTY_COUNT : 2
__DERIVATION : {}
__SERVER :
__NAMESPACE :
__PATH :
ProcessId : 4808
ReturnValue : 0
I even added a line of code between the variable and the execution that creates a text file on the desktop, just to verify I was getting into my ‘executeFile’ file, and that text file does get created. It seems that it’s just not remotely executing my MSP.
Thank you in advance for your assistance!
Catt11.
Here's the strategy I used to embed an msp into a powershell script. It works perfectly for me.
$file = "z:\software\AcrobatUpdate.msp"
$silentArgs = "/passive"
$additionalInstallArgs = ""
Write-Debug "Running msiexec.exe /update $file $silentArgs"
$msiArgs = "/update `"$file`""
$msiArgs = "$msiArgs $silentArgs $additionalInstallArgs"
Start-Process -FilePath msiexec -ArgumentList $msiArgs -Wait
You probably don't need to use the variables if you don't want to, you could hardcode the values. I have this set up as a function to which I pass those arguments, but if this is more of a one-shot deal, it might be easier to hard-code the values.
Hope that helps!
using Start-Process for MSP package is not a good practice because some update package lockdown powershell libs and so you must use WMI call
I'm trying to run two things: first, I'm creating a PDF with 4x5, ending with dev.off(), and then trying to create a new graph. However, after starting the second plot, I get:
Error in gzfile(file, "wb") : cannot open the connection
In addition: Warning message:
In gzfile(file, "wb") :
cannot open compressed file '/var/folders/n9/pw_dz8d13j3gb2xgqb6rfnz00000gn/T/RtmpTfm1Ur/rs-graphics-822a1c83-b3fd-46c3-8028-4e0778f91d0c/4db4b438-ac35-403b-b791-e781baba152c.snapshot', probable reason 'No such file or directory'
Graphics error: Error in gzfile(file, "wb") : cannot open the connection
What is this error? The working directory is one I have read/write access to, and my hard drive isn't full.
Also, I'm using RStudio.
This is a bit late but for anyone coming here for help, I got this error when I was trying to write a file from RStudio and my destination file path was very long. I realized this could be a problem because when I wrote the file to another location with a shorter name and tried to copy it into my original destination, Windows gave me an error saying "File path too long". You might need to save the original file into another location with a shorter absolute path.
Maybe you should look here. At the end it says
Note:
The most common reason for failure is lack of write permission in the current directory. For save.image and for saving at the end of a session this will shown by messages like
Error in gzfile(file, "wb") : unable to open connection
In addition: Warning message:
In gzfile(file, "wb") :
cannot open compressed file '.RDataTmp',
probable reason 'Permission denied'
So rapidly, if you try getwd(), look at where is your working directory set. If you're trying to save your document in a place where it's not in your current working directory, it will throw you this error.
At the end of your error message, it says probable reason 'No such file or directory'
Graphics error: Error in gzfile(file, "wb") : cannot open the connection
My diagnosis would be simply that it's trying to save your item in the wrong place and RStudio is not able to find the right place.
This burned me so hopefully saves someone else some toil. The issue was that the classifiers loaded just fine on OS X but on the Linux deployment system they would fail with the error listed in the question. The issue was the the files on the disk had extension abc.RData but the code modelAbc <- readRDS(file="abc.Rdata"). The difference in the upper and lowercase D in the .RData vs .Rdata extension would fail on Linux. It was not very noticeable but check your extensions for case.
You may have no permission to save file in the directory.
On RStudio, get your working directory by getwd().
Then, go to the directory in linux and observe its owner by ls -l.
Now you can change the owner of the directory by chown -R username directoryname.
But you must be root.
Problem resolved by specifying full file path:
saveRDS(df,'C:\\users\\matt\\desktop\\code\\df.Rdata')
I faced this issue lately. Try turning off your anti-virus and build the package, it might help. It worked for me. Usually anti-virus blocks the permissions and you could avoid it by disabling for sometime just before building a package.
I was trying to save an RDS file to my local Dropbox folder so it syncs with my Dropbox.
I figured out I got the same error because I was trying to create a new folder and looks like saveRDS cannot create a new folder, but it can add files to existing folders. So I changed the path to add the file into an existing folder and it worked!
In my case it was Windows Defender which was preventing Rstudio to write any file on hard drive. Either you need to turn Controlled Folder Access off or add Rstudio in the exclusion list.
I also had this problem when working with RStudio and R Markdown. I was getting this error message and had an annoying number of fatal errors which closed RStudio. My issue was that I was working off a network drive and either the name was too long, as in #AHedge above or my network firewalls were giving me trouble. For the moment, I have moved my working files to my desktop and things seem to be working fine. Not sure what this means for my file management over time.
Just want to add more clarity(scenarios in my experience) to what M Beausoleil mentioned.
When you are using a shared-working-directory and trying to rewrite the RDS files which are already existing in a working-directory written by some other user, you get this error.
As some people have already quoted that deleting the existing RDS files or changing the working directory works. It's not a magic. It just works because you are writing a new RDS file and not trying to re-write the old ones.
I came into the same problem after I re-install a new version of RStudio.
The Rmarkdown file I created using old version of RStudio shows the same problem.
When I use ggplot() to draw a picture the error code are as follow:
Warning in gzfile(file, "wb") :
cannot open compressed file 'I:/Rlearning/.Rproj.user/shared/notebooks/58A1385C-PCA作图/1/2C15461A183AC56C/cco192gb0pow1_t\_rs_rdf_32004888ecb.rdf', probable reason 'No such file or directory'
Error in gzfile(file, "wb") : cannot open the connection
Solution:
Create a new Rmarkdown file
Delete all codes
Copy your old Rmarkdown code into it.
I had the same problem.For me, it was caused due to not having enough disk space on the drive where R studio was installed.Freeing up space works.
The reason for the error is that your username is Chinese.Please create new user folder with English in the user directory.For example, you could name the folder for "DavidSmith".Then, you need create three folders("AppData","Local","Temp").File directory C:\Users\DavidSmith\AppData\Local\Temp.
In the Advanced system settings which will modify the environment variables TMP and TEMP C:\Users\DavidSmith\AppData\Local\Temp.Save them.
After modification, open RStudio and try again.
Notice:TMP and TEMP are modified in the USER VARIABLE.
I just ran into this problem after changing my system locale.
Check your locale using Sys.getlocale().
Change it to appropriate one using Sys.setLocale("LC_ALL","ENG") (replace "ENG" with appropriate one)
I can't say with certainty which locale would be appropriate, but it seems to be coherent with default OS one.
Hope this helps!
I had this error because of an invalid character in the filename to be used to save the file, in my case "/" (there are many such characters that cannot be used in a filename). I removed the character and it was solved.
In my case, I received the error "Error in gzfile(file, "wb") : cannot open the connection" when trying to exit R in the Anaconda Prompt and saving workspace image. I am using Windows 10 and R-3.5.2. To fix it, I had to go to the Program Files folder, right click and the R folder, then selected Properties. Selected the Security tab, then, in the Group or user names box, selected Users, then clicked Edit. In the Permissions for Users, I checked Full control and Modify and saved the changes. Then I was able to save the workspace image.
I have another instance of this error which seems to be new (or at least not listed here or here: apparently it's not OK to save a file with the name aux.RData. I guess it's a reserved filename.
x <- rnorm(9000)
save(x, file = "aux.RData")
Error in gzfile(file, "wb") : no se puede abrir la conexión
Also: Warning message:
In gzfile(file, "wb") :
cannot open compressed file 'aux.RData', probable reason 'No such file or directory'
But when I change the filename saves with no problem:
save(x, file = "aux_file.RData")
Haven't seen this case in the other answers:
if this seems to happen all the time, and to be very persistent when it does happen, check the default directory in your file handling software connection.
In my case FileZilla was logging on to my DigitalOcean droplet as "root" and whenever I used FileZilla to create a directory it was setting write permissions to "root", whereas my RStudio on the same droplet read/wrote as "My_Name". Anytime I set something up in FZ (e.g. large imported files, renamed or copied) the permissions would switch and I'd get this error.
If this is what is causing frequent error messages it can be solved instantly with chown -R My_Name directoryname but in the longer run, if you are going to be using your file handler to define and create a lot of directories, it will pay to create a connection whose default name is the same name you use for RStudio.
In my case, when it happened first, months ago, the solution here worked.
But recently, it came back, constantly... What solved this time was to change the anti-virus. I have not just the Windows defender, but also a 2nd anti-virus, the same in both times. I ended up deinstalling it and installing another antivirus... After this, the problem did not happen again...
After several days trying to solve this same ERROR or problem in my case (Windows 10 and R), I tried to save my file(file.RData) in D disk instead of C disk (where I always was working and I have installed R) and it was fine, without problems,my file was saved in D:/Users.When I tried many times to save it in C disk, always gave me Permission denied.
save(Myfile, file="D:/Users/Myfile.RData")
I encountered this same issue when trying to save an Rds file from an Markdown file. Changing my relative file path to an absolute file path worked for me.
In my case, this error was because the file that I wanted to re-write, was read-only (for whatever reason, I didn't do it myself). I just right-click on the file's name in the folder and unchecked the read-only property. After that it worked.