I'm simply trying to get shift+tab to be a recognized key sequence during my rxvt terminal sessions. So I can map it to usefulness such as:
bindkey "\e[Z" reverse-menu-complete
But, based on my research, I'm pretty sure the answer is no. Just want to make sure.
This is a hard limitation of rxvt? (Is there a technical reason for this limitation? Or just an unsupported feature?)
I can't get it to emit that either, although strangely enough, the rxvt source code (as shipped with Cygwin) does appear to have support for it:
case XK_Tab:
if (shft)
STRCPY(kbuf, "\033[Z");
else {
...
Anyway, rxvt development stopped eight years ago. Try its successor, rxvt-unicode, aka urxvt, where this does work. If you're on Cygwin or MSYS and you were using rxvt without an X server, which urxvt does require, try mintty.
Related
I use both GNU Make and - woe is me - ClearCase' clearmake.
Now, GNU make respect a flag named MAKEFLAGS, which for me is set to j20 on this multi-core machine I'm on. Unfortunately, clearmake also recognizes this option, yet doesn't except this value. It tells me:
clearmake: Error: Bad option (j)
clearmake: Error: Bad option (2)
clearmake: Error: Bad option (0)
Questions:
Why is this happening? Should ClearMake accommodate GNU Make's usage?
How can I get around it, other then turning the flag off an on repeatedly?
It's been 15 years or so since I used clearmake, but assuming it doesn't support the GNU make-specific GNUMAKEFLAGS variable you can use:
export GNUMAKEFLAGS=-j20
and leave MAKEFLAGS unset.
The "BUILDING SOFTWARE WITH CLEARCASE" clearly states in its T"unsupported Gnu make features" that this option is indeed not supported.
–j [JOBS]
--jobs=[JOBS]
Maybe a clearmake -C -J can help (for testing): there should then be no limit to the number of parallel builds.
Are you calling GNU make from a clearmake build script? Or are you trying to create a single makefile that will support both build tools? I think the GNUMAKEFLAGS EV is safer for GNU make specific values. I would also use
CCASE_MAKEFLAGS for any makeflags that are specific to clearmake.
CCASE_CONC to set the concurrency value. While clearmake no longer passes the -J in MAKEFLAGS, it used to, and if you're using an older clearmake (somewhere in the 7's as I recall), you could upset "child" GNU make sessions since they like -J about as much as clearmake likes -j.
Finally, check the env_ccase man page for the behavior mentioned in CCASE_MAKEFLAGS_V6_OBSOLETE. If you pass MAKEFLAGS explicitly in the build script like
$(MAKE) $(MAKEFLAGS) TARGET=x
And had started clearmake like this:
clearmake -C gnu TARGET=Y
You'll actually get both TARGET macro definitions in the command line. Setting the mentioned EV (at all) avoids the "pass defined macros in MAKEFLAGS" behavior. The switch exists because some people have makefiles that DEPEND on this behavior, while others have ones BROKEN BY this behavior...
Assuming for the sake of argument that your company has a support agreement with either IBM or HCL, this is a good time to use your support channels to bring up clearmake concerns.
The R interactive interface implements the shell-like read line behavior (I have no better words to formulate this...).
For example, pressing Ctrl-W kills the preceding word.
Now, I would like this mechanism to stop at characters other than alphanumeric. For example, if I have entered
data.frame(Ant
and press Ctrl-W, the whole string data.frame(Ant is killed. I would much prefer the Ctrl-W to kill the Ant and stop short of the left parenthesis.
Is there a way of tweaking this behavior?
The behaviour of readline depends upon the operating system and the IDE. On Windows, CRTL-W doesn't delete the previous word. I don't think that there's a trivial way of changing the behaviour. At a guess, start digging around in:
http://svn.r-project.org/R/trunk/src/library/utils/src/io.c
I recently installed Zsh in hope of a better life and brighter mornings. However, I quickly realized Zsh introduces various issues in conjunction with tmux.
The first issue was some weird stuff happening at the end of the prompt, before my commands, but this was resolved by supplying tmux with the -u flag for unicode-support. However, I am stuck with one final issue that needs resolution before I can use Zsh with tmux:
Usecase: Autocomplete a command which contains multiple suggestions
Issue: Autocompletion shifts suggestion one character to the right, while leaving the original character behind (visual bug, it is not included in the command)
Example 1.
Then I hit TAB..
Example 2.
Then I hit TAB..
Note 1: This does NOT occur when using the Bash-shell.
Note 2: I am using "oh-my-zsh". This issue only occurs when using the provided themes. This narrows it down to an "oh-my-zsh"-theme issue, not native zsh/tmux.
In case some people still get a similar issue, see also the top-voted answer of Remnant characters when tab completing with ZSH. The plugin you were using may have had the same non-printable characters issue, that would explain the symptoms.
VendorString() doesn't work, it's always Sun Microsystems, even if it is Xorg built for Solaris.
$ xdpyinfo | grep vendor
vendor string: The X.Org Foundation
vendor release number: 10601901
This is xorg-server 1.6.1 on Linux. Hopefully XOrg and XSun on Solaris will differ here.
To output these two fields, xdpyinfo calls the ServerVendor macro to determine the vendor, then parses the return of the VendorRelease macro differently depending on what ServerVendor was.
By the way, what's VendorString()? I don't have a function or macro by that name...
It's possibly a little hacky, but if you look at the list of extensions returned from Xsun and Xorg you should see that Xorg has a few extra XFree86-derived extensions.
xdpyinfo can be used to list the extensions via the command-line to check for differences; programmatically you can use XListExtensions() or XQueryExtension().
(I haven't got a Xsun X Server to hand but I'm pretty sure when I've looked in the past they have differed quite abit).
Thank you!
Oops, VendorRelease() string it is.
Anyway, unfortunately we cannot bet on this string. It changes often enough to have a trouble, for Xsun as well as for Xorg. I have found a solution working (hopefully) for them and for various other (derived) servers like Xvfb, Xnest etc.
Xsun does use a third value in an array of the keysyms for KP_ (numpad) keycodes. Xorg uses 1-st or 2-nd. A sniffer should first, obtain a keycode for a KP_ keysym, for instance XK_KP_7,
second, sniff what is in the XKeycodeToKeysym(d,keycode, [0-3]). Our XK_KP_7 will be on the index 2 for Xsun.
I have Vim 7.2 installed on Windows. In GVim, the <C-PageUp> and <C-PageDown> work for navigation between tabs by default. However, it doesn't work for Vim.
I have even added the below lines in _vimrc, but it still does not work.
map <C-PageUp> :tabp<CR>
map <C-PageDown> :tabn<CR>
But, map and works.
map <C-left> :tabp<CR>
map <C-right> :tabn<CR>
Does anybody have a clue why?
The problem you describe is generally caused by vim's terminal settings not knowing the correct character sequence for a given key (on a console, all keystrokes are turned into a sequence of characters). It can also be caused by your console not sending a distinct character sequence for the key you're trying to press.
If it's the former problem, doing something like this can work around it:
:map <CTRL-V><CTRL-PAGEUP> :tabp<CR>
Where <CTRL-V> and <CTRL-PAGEUP> are literally those keys, not "less than, C, T, R, ... etc.".
If it's the latter problem then you need to either adjust the settings of your terminal program or get a different terminal program. (I'm not sure which of these options actually exist on Windows.)
This may seem obvious to many, but konsole users should be aware that some versions bind ctrl-pageup / ctrl-pagedown as secondary bindings to it's own tabbed window feature, (which may not be obvious if you don't use that feature).
Simply clearing them from the 'Configure Shortcuts' menu got them working in vim correctly for me. I guess other terminals may have similar features enabeld by default.
I'm adding this answer, taking details from vi & Vim, to integrate those that are already been given/accepted with some more details that sound very important to me.
The alredy proposed answers
It is true what the other answer says:
map <C-PageUp> :echo "hello"<CR> won't work because Vim doesn't know what escape sequence corresponds to the keycode <C-PageUp>;
one solution is to type the escape sequence explicitly: map ^[[5^ :echo "hello"<CR>, where the escape sequence ^[[5^ (which is in general different from terminal to terminal) can be obtained by Ctrl+VCtrl+PageUp.
One additional important detail
On the other hand the best solution for me is the following
set <F13>=^[[5^
map <F13> :echo "hello"<CR>
which makes use of one of additional function key codes (you can use up to <F37>). Likewise, you could have a bunch of set keycode=escapesequence all together in a single place in your .vimrc (or in another dedicated file that you source from your .vimrc, why not?).