I need write a prolog program that read from keyboard such positive numbers until the user writes 'stop' and builds a binary dictionary without duplicates.
I try:
:-dynamic tree/1.
run:-
retractall(tree(_)),
write('Input N '), read(N),
insert(N,empty,T),
assert(tree(T)),
start(N),nl,
tree(T),write(T),!.
start(stop):-!.
start(N):-
N \= stop,
tree(T),
insert(N,T,NewTree),
assert(tree(NewTree)),
write('Input N '), read(M),
start(M).
insert(NewItem,empty,tree(NewItem,empty,empty)):- !.
insert(NewItem,tree(Element,Left,Right),tree(Element,NewLeft,Right)):-
NewItem #< Element,
!,insert(NewItem,Left,NewLeft).
insert(NewItem,tree(Element,Left,Right),tree(Element,Left,NewRight)):-
insert(NewItem,Right,NewRight).
Can anyone help me?
Two mistakes here. First of all, the first element is being inserted twice due to the explicit call to insert in the body of run, and to the call to start that will also call insert. Instead of doing this, you need to start by recording the empty tree. Second, it is not enough to consult which tree is currently being recorded, you need to remove the previous version of the tree and record the current one.
Fixing these two mistakes leads to the following solution:
:-dynamic tree/1.
run:-
retractall(tree(_)),
write('Input N '), read(N),
assert(tree(empty)), % 1. initially the tree is empty
start(N),nl,
tree(T),write(T),!.
start(stop):-!.
start(N):-
N \= stop,
retract(tree(T)), % 2. changed here
insert(N,T,NewTree),
assert(tree(NewTree)),
write('Input N '), read(M),
start(M).
insert(NewItem,empty,tree(NewItem,empty,empty)):- !.
insert(NewItem,tree(Element,Left,Right),tree(Element,NewLeft,Right)):-
NewItem #< Element,
!,insert(NewItem,Left,NewLeft).
insert(NewItem,tree(Element,Left,Right),tree(Element,Left,NewRight)):-
insert(NewItem,Right,NewRight).
On a slightly different note, you might ask yourself whether you really need to do all this asserting/retracting as you can pass the currently constructed tree as an argument of the start predicate.
Eliminating asserts and retracts gives the following version:
run:-
write('Input N '), read(N),
start(N, empty, T),nl,
write(T).
start(stop, T, T):-!.
start(N, CurTree, FinalTree):-
N \= stop,
insert(N,CurTree,NewTree),
write('Input N '), read(M),
start(M, NewTree, FinalTree).
insert(NewItem,empty,tree(NewItem,empty,empty)):- !.
insert(NewItem,tree(Element,Left,Right),tree(Element,NewLeft,Right)):-
NewItem #< Element,
!,insert(NewItem,Left,NewLeft).
insert(NewItem,tree(Element,Left,Right),tree(Element,Left,NewRight)):-
insert(NewItem,Right,NewRight).
Finally, observe that the cut in the first clause of start and the intended use of stop with the first and the second arguments being bound while the third one being free, makes the explicit check N\= stop redundant. This gives us the final version of the solution:
run:-
write('Input N '), read(N),
start(N, empty, T),nl,
write(T).
start(stop, T, T):-!.
start(N, CurTree, FinalTree):-
insert(N,CurTree,NewTree),
write('Input N '), read(M),
start(M, NewTree, FinalTree).
insert(NewItem,empty,tree(NewItem,empty,empty)):- !.
insert(NewItem,tree(Element,Left,Right),tree(Element,NewLeft,Right)):-
NewItem #< Element,
!,insert(NewItem,Left,NewLeft).
insert(NewItem,tree(Element,Left,Right),tree(Element,Left,NewRight)):-
insert(NewItem,Right,NewRight).
Related
This is the current code I have for a problem I am working on. It is supposed to read in from a file, and increment a counter, R, every time it comes across a vowel.
Currently, I have it stop when reaching a vowel, but I would like it to increment a counter, then continue processing. Once done, I want it to print R to the console. Thanks in advance!
readWord(InStream, W) :-
get0(InStream,Char),
checkChar_readRest(Char,Chars,InStream, R),
atom_codes(Code,Chars),
write(Code).
%checkChar_readRest(10,[],_) :- !. % Return
%checkChar_readRest(32,[],_) :- !. % Space
checkChar_readRest(-1,[],_,_) :- !. % End of Stream
checkChar_readRest(97,[],_,R) :- !. % a
checkChar_readRest(101,[],_,R) :- !. % e
checkChar_readRest(105,[],_,R) :- !. % i
checkChar_readRest(111,[],_,R) :- incr(R,R1), write(R1). % o
checkChar_readRest(117,[],_,R) :- !. % u
%checkChar_readRest(end_of_file,[],_,_) :- !.
checkChar_readRest(Char,[Char|Chars],InStream,R) :-
get0(InStream,NextChar),
checkChar_readRest(NextChar,Chars,InStream,R).
incr(X, X1) :- X1 is X+1.
vowel(InStream, R) :-
open(InStream, read, In),
repeat,
readWord(In, W),
close(In).
Here's my attempt (ISO predicates):
% open Src, count vowels, close stream, print to console
count_vowels_in(Src) :-
open(Src, read, Stream),
count(Stream, Total),
close(Stream),
% cutting here because our Stream is now closed, any backtracking will break things that rely on it
% you could also put this after at_end_of_stream/1 in count_/3
% not sure what best practices are here
!,
write(Total).
% just a nice wrapper to get started counting with the initial count set to 0
count(Stream, Total) :-
count_(Stream, 0, Total).
% at end of stream, Count = Total and we're done
count_(Stream, Count, Count) :-
at_end_of_stream(Stream).
% read from stream recursively, incrementing Count as needed
count_(Stream, Count0, Total) :-
\+at_end_of_stream(Stream),
get_char(Stream, Char),
char_value(Char, Value),
Count1 is Count0 + Value,
% recursively call count_, but now with our new Count1 value instead, carrying forward the results
count_(Stream, Count1, Total).
char_value(Char, 1) :-
vowel(Char).
char_value(Char, 0) :-
\+vowel(Char).
vowel(a).
vowel(e).
vowel(i).
vowel(o).
vowel(u).
The biggest difference is that I use two variables for keeping track of the count. Count (equivalent to your R) is the current count, and Total is a variable representing the final count. We unify Total with Count when we are finished counting: at the end of the stream.
In the original program posted, there were many singleton variables (variables that are never unified with anything, for example W). This is usually indicative of a bug and will generate warnings. Remember that Prolog is a logical language, it can be good to take a step back and think "what am I actually trying to do with these variables?". It can also help to break the problem down into smaller chunks instead of trying to write one predicate that does everything.
I might approach it like this:
Slurp in the entire file as a list of characters.
Traverse that list and tally the vowels it contains.
Write the tally.
Something like
findall(C, ( get0(V) , V \= -1 , char_code(C,V) ), Cs).
should suffice for slurping the text.
And then, something along these lines:
count_vowels :-
findall(C, ( get0(V) , V \= -1 , char_code(C,V) ), Cs),
count_vowels(Cs,N),
writeln( total_vowels : N )
.
count_vowels( S , N ) :- string(S), !, string_chars(S,Cs), count_vowels(Cs,N) .
count_vowels( Cs , N ) :- count_vowels(Cs,0,N) .
count_vowels( [] , N , N ) .
count_vowels( [C|Cs] , T , N ) :- tally(C,T,T1), count_vowels(Cs,T1,N).
tally( C , M , N ) :- vowel(C), !, N is M+1 .
tally( _ , N , N ) .
vowel( a ).
vowel( e ).
vowel( i ).
vowel( o ).
vowel( u ).
After doing some Prolog in uni and doing some exercises I decided to go along somewhat further although I got to admit I don't understand recursion that well, I get the concept and idea but how to code it, is still a question for me. So that's why I was curious if anyone knows how to help tackle this problem.
The idea is given a number e.g. 45, check whether it is possible to make a list starting with 1 going n+1 into the list and if the sum of the list is the same as the given number.
So for 45, [1,2,3,4,5,6,7,8,9] would be correct.
So far I tried looking at the [sum_list/2][1] implemented in Prolog itself but that only checks whether a list is the same as the number it follows.
So given a predicate lijstSom(L,S) (dutch for listSum), given
?- lijstSom(L, 45)
L = [1,2,3,4,5,6,7,8,9];
False
My Idea was something along the line of for example if S = 45, doing steps of the numbers (increasing by 1) and subtracting it of S, if 0 is the remainder, return the list, else return false.
But for that you need counters and I find it rather hard to grasp that in recursion.
EDIT:
Steps in recursion.
Base case empty list, 0 (counter nr, that is minus S), 45 (S, the remainder)
[1], 1, 44
[1,2], 2, 42
[1,2,3], 3, 39
I'm not sure how to read the example
?- lijstSom(L, 45)
L = [1,2,3,4,5,6,7,8,9],
False
...but think of the predicate lijstSom(List, Sum) as relating certain lists of integers to their sum, as opposed to computing the sum of lists of integers. Why "certain lists"? Because we have the constraint that the integers in the list of integers must be monotonically increasing in increments of 1, starting from 1.
You can thus ask the Prolog Processor the following:
"Say something about the relationship between the first argument of lijstSom/2 and the second argument lijstSom/2 (assuming the first is a list of monotonically increasing integers, and the second an integer):
lijstSom([1,2,3], Sum)
... should return true (because yes, there is at least one solution) and give Sum = 6 (because it constructs the solution, too ... we are some corner of Construtivism here.
lijstSom(L, 6)
... should return true (because yes, there is at least one solution) and give the solution [1,2,3].
lijstSom([1,2,3], 6)
... should return true (because yes, [1,2,3] has a sum 6); no further information is needed.
lijstSom(L, S)
... should an infinite series of true and pairs of solution ("generate the solutions").
L = [1], S = 1;
L = [1,2], S = 3;
L = [1,2,3], S = 6;
...
lijstSom([1,2,3], 7)
...should return false ("fail") because 7 is not in a relation lijstSom with [1,2,3] as 7 =/= 1+2+3.
One might even want things to have Prolog Processor say something interesting about:
lijstSom([1,2,X], 6)
X = 3
or even
lijstSom([1,2,X], S)
X = 3
S = 6
In fact, lijstSom/2 as near to mathematically magical as physically possible, which is to say:
Have unrestricted access to the full table of list<->sum relationships floating somewhere in Platonic Math Space.
Be able to find the correct entry in seriously less than infinite number of steps.
And output it.
Of course we are restricted to polynomial algorithms of low exponent and finite number of dstinguishable symbols for eminently practical reasons. Sucks!
So, first define lijstSom(L,S) using an inductive definition:
lijstSom([a list with final value N],S) ... is true if ... lijstSom([a list],S-N and
lijstSom([],0) because the empty list has sum 0.
This is nice because it gives the recipe to reduce a list of arbitrary length down to a list of size 0 eventually while keeping full knowledge its sum!
Prolog is not good at working with the tail of lists, but good with working with the head, so we cheat & change our definition of lijstSom/2 to state that the list is given in reverse order:
lijstSom([3,2,1], 6)
Now some code.
#= is the "constain to be equal" operator from library(clpfd). To employ it, we need to issue use_module(library(clpfd)). command first.
lijstSom([],0).
lijstSom([K|Rest],N) :- lijstSom([Rest],T), T+K #= N.
The above follows the mathematical desiderate of lijstSom and allows the Prolog Processor to perform its computation: in the second clause, it can compute the values for a list of size A from the values of a list of size A-1, "falling down" the staircase of always decreasing list length until it reaches the terminating case of lijstSom([],0)..
But we haven't said anything about the monotonically decreasing-by-1 list.
Let's be more precise:
lijstSom([],0) :- !.
lijstSom([1],1) :- ! .
lijstSom([K,V|Rest],N) :- K #= V+1, T+K #= N, lijstSom([V|Rest],T).
Better!
(We have also added '!' to tell the Prolog Processor to not look for alternate solutions past this point, because we know more about the algorithm than it will ever do. Additionally, the 3rd line works, but only because I got it right after running the tests below and having them pass.)
If the checks fail, the Prolog Processor will says "false" - no solution for your input. This is exactly what we want.
But does it work? How far can we go in the "mathematic-ness" of this eminently physical machine?
Load library(clpfd) for constraints and use library(plunit) for unit tests:
Put this into a file x.pl that you can load with [x] alias consult('x') or reload with make on the Prolog REPL:
:- use_module(library(clpfd)).
lijstSom([],0) :-
format("Hit case ([],0)\n"),!.
lijstSom([1],1) :-
format("Hit case ([1],1)\n"),!.
lijstSom([K,V|Rest],N) :-
format("Called with K=~w, V=~w, Rest=~w, N=~w\n", [K,V,Rest,N]),
K #= V+1,
T+K #= N,
T #> 0, V #> 0, % needed to avoid infinite descent
lijstSom([V|Rest],T).
:- begin_tests(listsom).
test("0 verify") :- lijstSom([],0).
test("1 verify") :- lijstSom([1],1).
test("3 verify") :- lijstSom([2,1],3).
test("6 verify") :- lijstSom([3,2,1],6).
test("0 construct") :- lijstSom(L,0) , L = [].
test("1 construct") :- lijstSom(L,1) , L = [1].
test("3 construct") :- lijstSom(L,3) , L = [2,1].
test("6 construct") :- lijstSom(L,6) , L = [3,2,1].
test("0 sum") :- lijstSom([],S) , S = 0.
test("1 sum") :- lijstSom([1],S) , S = 1.
test("3 sum") :- lijstSom([2,1],S) , S = 3.
test("6 sum") :- lijstSom([3,2,1],S) , S = 6.
test("1 partial") :- lijstSom([X],1) , X = 1.
test("3 partial") :- lijstSom([X,1],3) , X = 2.
test("6 partial") :- lijstSom([X,2,1],6) , X = 3.
test("1 extreme partial") :- lijstSom([X],S) , X = 1, S = 1.
test("3 extreme partial") :- lijstSom([X,1],S) , X = 2, S = 3.
test("6 extreme partial") :- lijstSom([X,2,1],S) , X = 3, S = 6.
test("6 partial list") :- lijstSom([X|L],6) , X = 3, L = [2,1].
% Important to test the NOPES
test("bad list", fail) :- lijstSom([3,1],_).
test("bad sum", fail) :- lijstSom([3,2,1],5).
test("reversed list", fail) :- lijstSom([1,2,3],6).
test("infinite descent from 2", fail) :- lijstSom(_,2).
test("infinite descent from 9", fail) :- lijstSom(_,9).
:- end_tests(listsom).
Then
?- run_tests(listsom).
% PL-Unit: listsom ...................... done
% All 22 tests passed
What would Dijkstra say? Yeah, he would probably bitch about something.
I am brand new to prolog and I feel like there is a concept that I am failing to understand, which is preventing me from grasping the concept of recursion in prolog. I am trying to return S, which is the sum of the square of each digit, taken as a list from an integer that is entered by the user in a query. E.g The user enters 12345, I must return S = (1^2)+(2^2)+(3^2)+(4^2)+(5^2) = 55.
In my program below, I understand why the each segment of the calculation of S is printed multiple time as it is part of the recursive rule. However, I do not understand how I would be able to print S as the final result. I figured that I could set a variable = to the result from sos in the second rule and add it as a parameter for intToList but can't seem to figure this one out. The compiler warns that S is a singleton variable in the intToList rule.
sos([],0).
sos([H|T],S) :-
sos(T, S1),
S is (S1 + (H * H)),
write('S is: '),write(S),nl.
intToList(0,[]).
intToList(N,[H|T]) :-
N1 is floor(N/10),
H is N mod 10,
intToList(N1,T),
sos([H|T],S).
The issue with your original code is that you're trying to handle your call to sos/2 within your recursive clause for intToList/2. Break it out (and rename intToList/2 to something more meaningful):
sosDigits(Number, SoS) :-
number_digits(Number, Digits),
sos(Digits, SoS).
Here's your original sos/2 without the write, which seems to work fine:
sos([], 0).
sos([H|T], S) :-
sos(T, S1),
S is (S1 + (H * H)).
Or better, use an accumulator for tail recursion:
sos(Numbers, SoS) :-
sos(Numbers, 0, SoS).
sos([], SoS, SoS).
sos([X|Xs], A, SoS) :-
A1 is A + X*X,
sos(Xs, A1, SoS).
You can also implement sos/2 using maplist/3 and sumlist/2:
square(X, S) :- S is X * X.
sos(Numbers, SoS) :- maplist(square, Numbers, Squares), sumlist(Squares, SoS).
Your intToList/2 needs to be refactored using an accumulator to maintain correct digit order and to get rid of the call to sos/2. Renamed as explained above:
number_digits(Number, Digits) :-
number_digits(Number, [], Digits).
number_digits(Number, DigitsSoFar, [Number | DigitsSoFar]) :-
Number < 10.
number_digits(Number, DigitsSoFar, Digits) :-
Number >= 10,
NumberPrefix is Number div 10,
ThisDigit is Number mod 10,
number_digits(NumberPrefix, [ThisDigit | DigitsSoFar], Digits).
The above number_digits/2 also handles 0 correctly, so that number_digits(0, Digits) yields Digit = [0] rather than Digits = [].
You can rewrite the above implementation of number_digits/3 using the -> ; construct:
number_digits(Number, DigitsSoFar, Digits) :-
( Number < 10
-> Digits = [Number | DigitsSoFar]
; NumberPrefix is Number div 10,
ThisDigit is Number mod 10,
number_digits(NumberPrefix, [ThisDigit | DigitsSoFar], Digits)
).
Then it won't leave a choice point.
Try this:
sos([],Accumulator,Accumulator).
sos([H|T],Accumulator,Result_out) :-
Square is H * H,
Accumulator1 is Accumulator + Square,
sos(T,Accumulator1,Result_out).
int_to_list(N,R) :-
atom_chars(N,Digit_Chars),
int_to_list1(Digit_Chars,Digits),
sos(Digits,0,R).
int_to_list1([],[]).
int_to_list1([Digit_Char|Digit_Chars],[Digit|Digits]) :-
atom_number(Digit_Char,Digit),
int_to_list1(Digit_Chars,Digits).
For int_to_list I used atom_chars which is built-in e.g.
?- atom_chars(12345,R).
R = ['1', '2', '3', '4', '5'].
And then used a typical loop to convert each character to a number using atom_number e.g.
?- atom_number('2',R).
R = 2.
For sos I used an accumulator to accumulate the answer, and then once the list was empty moved the value in the accumulator to the result with
sos([],Accumulator,Accumulator).
Notice that there are to different variables for the accumulator e.g.
Accumulator1 is Accumulator + Square,
sos(T,Accumulator1,Result_out).
this is because in Prolog variables are immutable, so one can not keep assigning new values to the same variable.
Here are some example runs
?- int_to_list(1234,R).
R = 30.
?- int_to_list(12345,R).
R = 55.
?- int_to_list(123456,R).
R = 91.
If you have any questions just ask in the comments under this answer.
Prolog, recursive function:
i want it to print the C with each element of the list
for example: C=30 and [H|T]= [-9,-10,-30]
myfunc(C,[H|T]):-
(\+([H|T]=[])),
write(C), write(' with '), write(H), nl,
myfunc(C,T).
i check at the beginning that the head of the list is not empty. it gives me this output
30 with -9
30 with -10
30 with -30
(32 ms) no
this output is what i want but i dont want to get a 'no' at the end because this makes the parent function to fail as well!
how can i remove it and put a 'yes' instead?
Simple way: just add a base case with the empty list.
myfunc(_, []) :- !.
myfunc(C,[H|T]):-
write(C), write(' with '), write(H), nl,
myfunc(C,T).
test:
?- myfunc(30, [1, 2, 3]).
30 with 1
30 with 2
30 with 3
true.
I don't know if this is the best way to do that, but you didn't give us much details about your whole program, so I opted for a small modification of your predicate.
If you have maplist in your Prolog, you can write
myfunc(N, L) :-
maplist(my_write(N), L).
my_write(N, Val) :-
format('~w with ~w~n', [N, Val]).
With SWI-Prolog and module lambda
:- use_module(library(lambda)).
myfunc(N, L) :-
maplist(\X^format('~w with ~w~n', [N, X]), L).
I am new to Prolog and am having some difficulty fixing the errors of my first program.
The program requirement is that it divides the 2 inputs using recursion, returning 0 if the dividend is larger than the divisor, and ignores remainders.
%Author: Justin Taylor
testquotient :-
repeat,
var(Divident), var(Divisor), var(Answer), var(End),
write('Enter Divident: '),
read(Divident),
write('Enter Divisor: '),
read(Divisor),
quotient(Divident, Divisor, Answer),
nl,
write('Quotient is = '),
write(Answer),
nl,
write('Enter 0 to quit, 1 to continue: '),
read(End),
(End =:= 0),!.
quotient(_, 0, 'Undefined').
quotient(0, _, 0).
quotient(Divisor == Divident -> Answer = 1).
quotient(Divisor < Divident -> Answer = 0).
quotient(Divident, Divisor, Answer) :-
(Divisor > Divident -> Divisor = Divisor - Divident,
quotient(Divident, Divisor, Answer + 1);
Answer = Answer).
First, read up on is. Type help(is). at the SWI-Prolog's prompt. Read the whole section about "Arithmetic" carefully. Second, your first few clauses for quotient are completely off-base, invalid syntax. I'll show you how to rewrite one of them, you'll have to do the other yourself:
%% WRONG: quotient(Divisor == Divident -> Answer = 1).
quotient(Divisor, Divident, Answer) :-
Divisor =:= Divident -> Answer = 1.
%% WRONG: quotient(Divisor < Divident -> Answer = 0).
....
Note the use of =:= instead of ==.
Your last clause for quotient looks almost right at the first glance, save for the major faux pas: prolog's unification, =, is not, repeat not, an assignment operator! We don't change values assigned to logical variables (if X is 5, what's there to change about it? It is what it is). No, instead we define new logical variable, like this
( Divisor > Divident -> NewDivisor = Divisor - Divident,
and we use it in the recursive call,
%% WRONG: quotient(Divident, NewDivisor, Answer + 1) ;
but this is wrong too, w.r.t. the new Answer. If you add 1 on your way down (as you subtract Divident from your Divisor - btw shouldn't it be the other way around?? check your logic or at least swap your names, "divisor" is what you divide by ) that means you should've supplied the initial value. But you seem to supply the terminal value as 0, and that means that you should build your result on your way back up from the depths of recursion:
%%not quite right yet
quotient(Divident, NewDivisor, NewAnswer), Answer = NewAnswer + 1 ;
Next, Answer = Answer succeeds always. We just write true in such cases.
Lastly, you really supposed to use is on each recursion step, and not just in the very end:
( Divisor > Divident -> NewDivisor is Divisor - Divident, %% use "is"
quotient(Divident, NewDivisor, NewAnswer), Answer is NewAnswer+1 %% use "is"
; true ). %% is this really necessary?
Your 'Undefined' will cause an error on 0, but leave it at that, for now. Also, you don't need to "declare" your vars in Prolog. The line var(Divident), ..., var(End), serves no purpose.