When I deploy my project to inetpub/wwwroot/ directory, and trying to run my index.aspx file though browser, it shows this error:
Line 44: < authentication mode="Windows" / >
Source File: c:\inetpub\wwwroot\conversion\web.config Line: 44
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618
I don't know what the problem is. How can this be fixed?
IIS version 5.1
You need to look in your web.config file and and change the authentication mode to "None"
<authentication mode="None" />
You can read more about authentication modes and how they work here.
Related
I'm having trouble opening my projects in Visual Studio. I get the following error and the project does not load.
Creation of virtual directory failed with the following error: Filename: C:\Windows\Microsoft.NET\Framework\v4.0.30319\Config\web.config
Line number: 24
Error: The configuration section 'fulltrustassemblies' cannot be read because it is missing a section declaration.
I tried creating a new ASP.NET webform application with target framework 4.7.2 (same as the ones of the project that does not load) and get the same issue.
Did you try if adding the section to the file solve the problem?
<configuration>
<system.webServer>
<system.web>
<fullTrustAssemblies>
<clear/>
</fullTrustAssemblies>
</system.web>
</system.webServer>
</configuration>
In the respective web.config file, you need to removed following element：
<fullTrustAssemblies>
....
</fullTrustAssemblies>
<partialTrustVisibleAssemblies />
I have created a web site on asp.net 4.0 and when I create a set up of this site using UltiDev Web Server the set has been completed successfully and installed and when i run it through shortcut the page show this error
Server Error in '/WebApp' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive.
Source Error:
Line 14:
Line 15: <system.web>
Line 16: <compilation debug="true" targetFramework="4.0" />
Line 17:
Line 18: <authentication mode="Forms">
Source File: C:\Program Files (x86)\Microsoft\TestSetup\WebApp\web.config Line: 16
Version Information: Microsoft .NET Framework Version:2.0.50727.5466; ASP.NET Version:2.0.50727.5459
and when i create any app on .net framework 2.0 it work fine ..
I had been creating setup for a long time in .net 2.0
Saad,
When registering a web application with UWS, please be sure to use /CLR:4 parameter to ensure your application is going to be loaded into UWS application host process running .NET Framework 4.x.
I try to publish a web application from my VS2012 to a remote computer.
I published the files but when I try to open the website, I get this error:
Configuration Error
Description: An error occurred during the processing of a
configuration file required to service this request. Please review the
specific error details below and modify your configuration file
appropriately.
Parser Error Message: Unrecognized attribute 'targetFramework'. Note
that attribute names are case-sensitive.
Source Error:
Line 41:
Line 42: <compilation targetFramework="4.0" />
Line 43: <httpRuntime targetFramework="4.0" />
Line 44: <authentication mode="Forms">
Line 45: <forms loginUrl="~/" timeout="2880" />
(line 43 is in red )
On the remote computer :
* IIS7 is installed (and also IIS6, I think)
* ASP.NET 4.0 is installed
* "aspnet_regiis -ir" > installed successfully
* IIS7 > Application Pools > ASP.NET 4.0 > poining to ".NET Framework v4.0.30319"
* IIS7 > my web application > "ASP.NET 4.0" (Integrated) is chosen.
I don't know if it 's important but server's windows is Widows Server 2008 RT Enterprise 64-bit and my computer is windows 7 32-bit.
Nothing helped...
The httpRuntime did not have targetFramework available for set, remove it and it will work.
I had similiar issue when I try to publish the website.
The code compiled fine in both Debug and Release but got Unrecognized attribute 'targetFramework'... while publishing the site after updating my solution to .net 4.7.2 from older version .net3.5
I then updated my .pubxml file to contain
**<TargetFrameworkVersion>v4.0</TargetFrameworkVersion>**
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<TargetFrameworkVersion>v4.0</TargetFrameworkVersion>
<WebPublishMethod>FileSystem</WebPublishMethod>
It worked for me then
I get this error when deploying website in 11s 7.5 :
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
Line 16: <compilation debug="true" targetFramework="4.0" />
Line 17:
Line 18: <authentication mode="Forms">
Line 19: <forms loginUrl="~/Account/Login.aspx" timeout="2880" />
Line 20: </authentication>
Source File: C:\Users*\Documents\Visual Studio 2010\Projects\web\web\web.config Line: 18
I am trying to deploy my website locally for testing.
Check out with follwing solution:
Delete the bin and obj folders, run a Clean Solution and built it again, the error goes away.
check the Application Pool the site is running under to make sure the Application Pool is using the .NET 4.0 Framework (instead of .NET 2.0 Framework).
I have deployed my asp.net 2.0 website on IIS, and I tested there by browsing website in IIS and it's working fine.
But I am getting the below error while browsing the website
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Unrecognized attribute 'xmlns'.
Source Error:
<?xml version="1.0"?>
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<configSections>
<section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=3.1.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/>
Previously when we used to create a website in IIS, it worked fine. I have checked the website folder in IIS [ By clicking Property > ASP.NET] and the framwework tageted there is 1.1, and it is in read only mode. If the problem is related to this issue than please let me know how to change it.
In the Property > ASP.NET tab you need to select the 2.0 version in the version combo. If not available, it means that .NET 2.0 is not properly installed with IIS.
I had this exact error message on a machine where I installed .NET 2.0 prior to IIS.
You can fix this by opening a .NET 2.0 SDK Command Prompt, and run
aspnet_regiis.exe -ir
This will register .NET 2.0 in IIS, and you will get it available in the version combo.
NOTE:
An alternative to run it in the SDK command prompt, is to open a standard command window and navigate to the .NET Framework 2.0 installed location and run aspnet_regiis.exe -ir from there.
On my installation this is:
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50110>
The error message you're getting is that the attribute xmlns of the element configuration is not recognized. Before anything else, have you tried removing the xmlns attribute?
I've just double checked by looking at a web.config file I have to hand and the start of it looks like this:
<?xml version="1.0"?>
<configuration>
<configSections>
i.e. No xmlns attribute on the configuration element