i have ubuntu-10.10 desktop version i installed following packages using apt-get install
libglib2.0-dev
libSM-dev
libxrender-dev
libfontconfig1-dev
libxext-dev
libgl1-mesa-dev
libglu-meas-dev
i downloaded qt-sdk-linux-x86-opensource-2010.05.1.bin
changed permission of bin file
chmod u+x qt-sdk-linux-x86-opensource-2010.05.1.bin
./qt-sdk-linux-x86-opensource-2010.05.1.bin
it gives me an error like not able to create symbolic link to libQtCore-4.7.0 and installation aborts.
can any one suggest me what is going wrong and how can i over come this issue
You can just install qt-sdk package from Ubuntu repositories, if you must install by hand, try running it with sudo;
sudo ./qt-sdk-linux-x86-opensource-2010.05.1.bin
Related
I tried to install R 4.1 on a newly set-up Ubuntu 20.04. After some struggle with the repositories and keys, I chose to install from source.
Visited https://www.r-project.org/ to download latest version of R. Ran ./configure multiple times to note the requirement of various libraries which you may note as follows. I am hoping this will save significant amount of time for anyone intending to build from source. Suggestions welcome for speeding up the process or better solution. However my intention is to share entire set of libraries that I had to install on a naked installation of 20.04 on which the very first package I tried to install was R 4.1 (from source).
Directory where you downloaded the tar.gz (e.g. R-4.1.2.tar.gz in my case)
cd Downloads
Untar
tar -xvzf R-4.1.2.tar.gz
Enter directory
cd R-4.1.2
As root
sudo su
Try validating configuration (encountered many errors throughout and following libraries were installed)
./configure
Installed various libraries:
apt-get install build-essential
apt-get install gfortran
apt-get install fort77
apt-get install libreadline-dev
apt-get install xorg-dev
apt-get install liblzma-dev libblas-dev
apt-get install gcc-multilib
apt-get install libbz2-dev
apt-get install libpcre2-dev
apt-get install libcurl4-openssl-dev
apt install default-jdk
make
make install
The above set worked for me and I am hopeful it may be of help.
For whatever reason, Amazon moved R to the so-called "Extras Library" so you can't install R using sudo yum install -y R anymore. Instead, you have to do sudo amazon-linux-extras install R3.4. As a result, I can only install R 3.4.3 when the newest stable release is 3.6.1, and so many R libraries can't even be installed because the version is too low. Is there any good and clean way to install the latest version of R and skip Amazon's package manager? Thanks!
Use amazon-linux-extras which installs R4.0.2:
amazon-linux-extras install R4
You may need root:
sudo amazon-linux-extras install R4
I've tried setting up R 3.6.x on a docker container that uses the amazonlinux image. My approach was to get the R source file from the below link and install from source
cd /tmp/
wget https://cloud.r-project.org/src/base/R-3/R-3.6.3.tar.gz
tar -zxf R-3.6.3.tar.gz
cd /tmp/R-3.6.3
./configure --without-libtiff --without-lapack --without-ICU --disable-R-profiling --disable-nls
make
make install
you will need to yum install some dependencies, like 'make', which doesn't seem to come with aws amazonlinux docker image (which i think mirrors the EC2 instance AMI image you are referring to).
The above kind of worked for me in that i had a working R3.6 installation, but it didnt allow me use it with rshiny server, so i'm reverting to the shipped 3.4.3 version.
tl;dr: you'll probably have to manually download the source files and install the desired R version from source, and throw in some build dependencies as well.
Try this on Amazon Linux 2
yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
yum -y install R
Amazon Linux 2 Image contains extras library that can be used as well. Follow the guide here.
https://aws.amazon.com/premiumsupport/knowledge-center/ec2-install-extras-library-software/
sudo amazon-linux-extras enable R3.4
sudo yum clean metadata && sudo yum install R3.4
My simple Dockerfile:
FROM ubuntu:18.04
RUN apt update && apt upgrade -y
RUN apt install build-essential cmake qt5-default -y
RUN apt install qttools5-dev-tools -y
When I check linguist inside the container it's there:
root#9087245330a7:/# which linguist
/usr/bin/linguist
...but when I configure my app inside the container:
CMake Error at CMakeLists.txt:72 (find_package):
By not providing "FindQt5LinguistTools.cmake" in CMAKE_MODULE_PATH this
project has asked CMake to find a package configuration file provided by
"Qt5LinguistTools", but CMake did not find one.
Could not find a package configuration file provided by "Qt5LinguistTools"
(requested version 5.5.1) with any of the following names:
Qt5LinguistToolsConfig.cmake
qt5linguisttools-config.cmake
Add the installation prefix of "Qt5LinguistTools" to CMAKE_PREFIX_PATH or
set "Qt5LinguistTools_DIR" to a directory containing one of the above
files. If "Qt5LinguistTools" provides a separate development package or
SDK, be sure it has been installed.
What is going on? This works on Ubuntu 16.04 just fine.
The problem was that in Ubuntu 18.04+ you need to install also qttools5-dev in order to get /usr/lib/x86_64-linux-gnu/cmake/Qt5LinguistTools/Qt5LinguistToolsConfig.cmake.
For some reason, I could not install the rJava package without root privilege (using sudo R and then install.packages('rJava')). It should have solved my problem, however I can only use this package when launching R with sudo R. If I launch it without sudo, R will act as if this package is not installed.
I tried looking at /usr/local/lib/R/site-library, every package belongs to my user and group "staff" except this one, that belongs to root and staff. The rights for every package are rwxrwxr-x and I am in group staff, so I should have all the permissions I need. In addition, I tried changing the owner of the rJava folder to my user and it didn't change anything. Do anybody have any idea why rJava is not recognized if I start R without sudo?
Thanks!
I also had issues installing rJava so I'll outline the steps I took to fix it even though it may be specific to my system. There's at least a chance it will work for you too.
Remove rJava and openjdk:
sudo apt-get purge r-cran-rjava
sudo apt-get purge openjdk-7-jre
Install oracle java:
sudo add-apt-repository ppa:webupd8team/java
sudo apt-get update
sudo apt-get install oracle-java8-installer
Reinstall rJava
sudo apt-get install r-cran-rjava
After that everything was hunky-dory. glmulti installed fine as well.
Try unsetting the JAVA_HOME environmental variable before starting R:
unset JAVA_HOME
I am trying to install Rstudio. I have downloaded the rstudio-0.98.1103-deb package.
This is the error I am getting when I do:
sudo dpkg -i rstudio-0.98.1103-amd64.deb
How do I go about the installation? Any suggestions would be great. I am on Ubuntu 14.04.
Package libjpeg62 is not installed.
You can get it by typing this in Terminal:
sudo apt-get install libjpeg62
It tells you pretty clearly that you libjpeg62.
So do sudo apt-get install libjpeg62 and then reinstall RStudio.