I am using ps to list all of the processes running on the machine I am connected to, searching them for my own processes, and then printing the number of processes I am running, like so:
ps -Af | grep '^mkuhlman' | wc -l
Problem is, checking against the actual list of processes, I'm only running 8, but wc is listing 9 processes. What am I doing wrong?
To clarify, I am not looking for matches to processes, but matches to my own username.
Your pipeline has a few processes, and you're counting them.
Running ps is fine, but you might be happier with pgrep. It has a man page. (And ps -A seems at odds with grepping for your own username.)
Though grep -v grep would work in most cases, it can result in wrong output as it excludes all grep processes, not just the ones related to the ps command line. So, you could do this instead:
ps -Af | grep -E '^mkuhlman|__unique__' | grep -v __unique__
where __unique__ is a unique string that is unlikely to be used in the command line of other user processes.
See also:
Finding process count in Linux via command line
As of now I am creating a topic one by one by using below command.
sh ./bin/kafka-topics --create --zookeeper localhost:2181 --topic sdelivery --replication-factor 1 --partitions 1
Since I have 200+ topics to be created. Is there any way to create a list of topic with a single command?
I am using 0.10.2 version of Apache Kafka.
This seems like more of a unix/bash question than a Kafka one: the xargs utility is specifically designed to run a command repeatedly from a list of arguments. In your specific case you could use:
cat topic_list.txt | xargs -I % -L1 sh ./bin/kafka-topics --create --zookeeper localhost:2181 --topic % --replication-factor 1 --partitions 1
If you want to do a "dry run" and see what commands will be executed you can replace the sh with echo sh.
Alternatively you can just make sure that your config files have default topic settings of --replication-factor 1 and --partitions 1 and just allow those topics to be automatically created the first time you send a message to them.
You could use Terraform or Kubernetes Operators which will not only help you create topics (with one command), but also manage them later if you did need to delete or modify their configs.
But without custom solutions, and only for purpose of batch-creation, you can use awk for this
Create a file
$ cat /tmp/topics.txt
test1:1:1
test2:1:2
Then use AWK system function to execute the kafka-topics script, and parse the file
$ awk -F':' '{ system("./bin/kafka-topics.sh --create --zookeeper localhost:2181 --topic=" $1 " --replication-factor=" $2 --partitions=" $3 " ) }' /tmp/topics.txt
Created topic "test1".
Created topic "test2".
And we can see the topics are created
$ ./bin/kafka-topics.sh --zookeeper localhost:2181 --list
test1
test2
Note: Hundreds of topics this quickly might overload Zookeeper, so might help to add a call to "; sleep 10" at the end.
As of Kafka 3.0, the Zookeeper flag is replaced by bootstrap-servers.
This is my first question on stackoverflow!
I want to have a unix script that will run grep on the console output. Here is what my script does:
1. Telnet into a remote server (I have done this part successfully)
2. On successful login, the remote server displays outputs information on the console. I need to run grep on that console output (need help with this)
So, I need a script to run grep on the output appearing on the console.
Any thoughts??
Thanks,
Puneet
Use SSH instead. It's more secure and far easier to script.
ssh remoteusername#remotehost:/path/to/remote/script | grep 'something'
with appropriate key setup, it won't even prompt you for a password.
Have you tried I/O redirection? You could either do
$ your-command > output.txt
and then run grep on that file, or just directly pipe the output through grep like so
$ your-command | grep ...
See this article or google around for similar. There are probably thousands of good articles about this around the web.
Instead of telnet, I would suggest using netcat (nc). You could then pass your login credentials via standard input and grep the standard output (nc prints anything sent by the server on standard output).
nc <host> <port> <auth.txt | grep 'string'
What you want to do is probably using a pipe. You can probably see it in the above answers it's the | sign you see in the command. It may be difficult to locate on your keyboard, depending on the layout. (I have to admit it is not very often used).
Pipes will redirect the output of one command. Instead of sending it to the console, they will send it as an input of another command.
cmd1 | grep foo is equivalent to running grep foo on the output of cmd1 (you can replace cmd1 by your netstat command).
One last thing is that you can have as many pipes as you want. For instance on my machine I can run ls -ltr | tail -1 | awk '{print $9}' | grep foo to look for the word foo in the last modified file.
There are many things that all programmers should know, but I am particularly interested in the Unix/Linux commands that we should all know. For accomplishing tasks that we may come up against at some point such as refactoring, reporting, network updates etc.
The reason I am curious is because having previously worked as a software tester at a software company while I am studying my degree, I noticed that all of developers (who were developing Windows software) had 2 computers.
To their left was their Windows XP development machine, and to the right was a Linux box. I think it was Ubuntu. Anyway they told me that they used it because it provided powerful unix operations that Windows couldn't do in their development process.
This makes me curious to know, as a software engineer what do you believe are some of the most powerful scripts/commands/uses that you can perform on a Unix/Linux operating system that every programmer should know for solving real world tasks that may not necessarily relate to writing code?
We all know what sed, awk and grep do. I am interested in some actual Unix/Linux scripting pieces that have solved a difficult problem for you, so that other programmers may benefit. Please provide your story and source.
I am sure there are numerous examples like this that people keep in their 'Scripts' folder.
Update: People seem to be misinterpreting the question. I am not asking for the names of individual unix commands, rather UNIX code snippets that have solved a problem for you.
Best answers from the Community
Traverse a directory tree and print out paths to any files that match a regular expression:
find . -exec grep -l -e 'myregex' {} \; >> outfile.txt
Invoke the default editor(Nano/ViM)
(works on most Unix systems including Mac OS X)
Default editor is whatever your
"EDITOR" environment variable is
set to. ie: export
EDITOR=/usr/bin/pico which is
located at ~/.profile under Mac OS
X.
Ctrl+x Ctrl+e
List all running network connections (including which app they belong to)
lsof -i -nP
Clear the Terminal's search history (Another of my favourites)
history -c
I find commandlinefu.com to be an excellent resource for various shell scripting recipes.
Examples
Common
# Run the last command as root
sudo !!
# Rapidly invoke an editor to write a long, complex, or tricky command
ctrl-x ctrl-e
# Execute a command at a given time
echo "ls -l" | at midnight
Esoteric
# output your microphone to a remote computer's speaker
dd if=/dev/dsp | ssh -c arcfour -C username#host dd of=/dev/dsp
How to exit VI
:wq
Saves the file and ends the misery.
Alternative of ":wq" is ":x" to save and close the vi editor.
grep
awk
sed
perl
find
A lot of Unix power comes from its ability to manipulate text files and filter data. Of course, you can get all of these commands for Windows. They are just not native in the OS, like they are in Unix.
and the ability to chain commands together with pipes etc. This can create extremely powerful single lines of commands from simple functions.
Your shell is the most powerful tool you have available
being able to write simple loops etc
understanding file globbing (e.g. *.java etc.)
being able to put together commands via pipes, subshells. redirection etc.
Having that level of shell knowledge allows you to do enormous amounts on the command line, without having to record info via temporary text files, copy/paste etc., and to leverage off the huge number of utility programs that permit slicing/dicing of data.
Unix Power Tools will show you so much of this. Every time I open my copy I find something new.
I use this so much I am actually ashamed of myself. Remove spaces from all filenames and replace them with an underscore:
[removespaces.sh]
#!/bin/bash
find . -type f -name "* *" | while read file
do
mv "$file" "${file// /_}"
done
My personal favorite is the lsof command.
"lsof" can be used to list opened file descriptors, sockets, and pipes.
I find it extremely useful when trying to figure out which processes have used which ports/files on my machine.
Example: List all internet connections without hostname resolution and without port to port name conversion.
lsof -i -nP
http://www.manpagez.com/man/8/lsof/
If you make a typo in a long command, you can rerun the command with a substitution (in bash):
mkdir ~/aewseomeDirectory
you can see that "awesome" is mispelled, you can type the following to re run the command with the typo corrected
^aew^awe
it then outputs what it substituted (mkdir ~/aweseomeDirectory) and runs the command. (don't forget to undo the damage you did with the incorrect command!)
The tr command is the most under-appreciated command in Unix:
#Convert all input to upper case
ls | tr a-z A-Z
#take the output and put into a single line
ls | tr "\n" " "
#get rid of all numbers
ls -lt | tr -d 0-9
When solving problems on faulty linux boxes, by far the most common key sequence I type end up typing is alt+sysrq R E I S U B
The power of this tools (grep find, awk, sed) comes from their versatility, so giving a particular case seems quite useless.
man is the most powerful comand, because then you can understand what you type instead of just blindly copy pasting from stack overflow.
Example are welcome, but there are already topics for tis.
My most used :
grep something_to_find * -R
which can be replaced by ack and
find | xargs
find with results piped into xargs can be very powerful
some of you might disagree with me, but nevertheless, here's something to talk about. If one learns gawk ( other variants as well) throughly, one can skip learning and using grep/sed/wc/cut/paste and a few other *nix tools. all you need is one good tool to do the job of many combined.
Some way to search (multiple) badly formatted log files, in which the search string may be found on an "orphaned" next line. For example, to display both the 1st, and a concatenated 3rd and 4th line when searching for id = 110375:
[2008-11-08 07:07:01] [INFO] ...; id = 110375; ...
[2008-11-08 07:07:02] [INFO] ...; id = 238998; ...
[2008-11-08 07:07:03] [ERROR] ... caught exception
...; id = 110375; ...
[2008-11-08 07:07:05] [INFO] ...; id = 800612; ...
I guess there must be better solutions (yes, add them...!) than the following concatenation of the two lines using sed prior to actually running grep:
#!/bin/bash
if [ $# -ne 1 ]
then
echo "Usage: `basename $0` id"
echo "Searches all myproject's logs for the given id"
exit -1
fi
# When finding "caught exception" then append the next line into the pattern
# space bij using "N", and next replace the newline with a colon and a space
# to ensure a single line starting with a timestamp, to allow for sorting
# the output of multiple files:
ls -rt /var/www/rails/myproject/shared/log/production.* \
| xargs cat | sed '/caught exception$/N;s/\n/: /g' \
| grep "id = $1" | sort
...to yield:
[2008-11-08 07:07:01] [INFO] ...; id = 110375; ...
[2008-11-08 07:07:03] [ERROR] ... caught exception: ...; id = 110375; ...
Actually, a more generic solution would append all (possibly multiple) lines that do not start with some [timestamp] to its previous line. Anyone? Not necessarily using sed, of course.
for card in `seq 1 8` ;do
for ts in `seq 1 31` ; do
echo $card $ts >>/etc/tuni.cfg;
done
done
was better than writing the silly 248 lines of config by hand.
Neded to drop some leftover tables that all were prefixed with 'tmp'
for table in `echo show tables | mysql quotiadb |grep ^tmp` ; do
echo drop table $table
done
Review the output, rerun the loop and pipe it to mysql
Finding PIDs without the grep itself showing up
export CUPSPID=`ps -ef | grep cups | grep -v grep | awk '{print $2;}'`
Best answers from the Community
Traverse a directory tree and print out paths to any files that match a regular expression:
find . -exec grep -l -e 'myregex' {} \; >> outfile.txt
Invoke the default editor(Nano/ViM)
(works on most Unix systems including Mac OS X)
Default editor is whatever your
"EDITOR" environment variable is
set to. ie: export
EDITOR=/usr/bin/pico which is
located at ~/.profile under Mac OS
X.
Ctrl+x Ctrl+e
List all running network connections (including which app they belong to)
lsof -i -nP
Clear the Terminal's search history (Another of my favourites)
history -c
Repeat your previous command in bash using !!. I oftentimes run chown otheruser: -R /home/otheruser and forget to use sudo. If you forget sudo, using !! is a little easier than arrow-up and then home.
sudo !!
I'm also not a fan of automatically resolved hostnames and names for ports, so I keep an alias for iptables mapped to iptables -nL --line-numbers. I'm not even sure why the line numbers are hidden by default.
Finally, if you want to check if a process is listening on a port as it should, bound to the right address you can run
netstat -nlp
Then you can grep the process name or port number (-n gives you numeric).
I also love to have the aid of colors in the terminal. I like to add this to my bashrc to remind me whether I'm root without even having to read it. This actually helped me a lot, I never forget sudo anymore.
red='\033[1;31m'
green='\033[1;32m'
none='\033[0m'
if [ $(id -u) -eq 0 ];
then
PS1="[\[$red\]\u\[$none\]#\H \w]$ "
else
PS1="[\[$green\]\u\[$none\]#\H \w]$ "
fi
Those are all very simple commands, but I use them a lot. Most of them even deserved an alias on my machines.
Grep (try Windows Grep)
sed (try Sed for Windows)
In fact, there's a great set of ports of really useful *nix commands available at http://gnuwin32.sourceforge.net/. If you have a *nix background and now use windows, you should probably check them out.
You would be better of if you keep a cheatsheet with you... there is no single command that can be termed most useful. If a perticular command does your job its useful and powerful
Edit you want powerful shell scripts? shell scripts are programs. Get the basics right, build on individual commands and youll get what is called a powerful script. The one that serves your need is powerful otherwise its useless. It would have been better had you mentioned a problem and asked how to solve it.
Sort of an aside, but you can get powershell on windows. Its really powerful and can do a lot of the *nix type stuff. One cool difference is that you work with .net objects instead of text which can be useful if you're using the pipeline for filtering etc.
Alternatively, if you don't need the .NET integration, install Cygwin on the Windows box. (And add its directory to the Windows PATH.)
The fact you can use -name and -iname multiple times in a find command was an eye opener to me.
[findplaysong.sh]
#!/bin/bash
cd ~
echo Matched...
find /home/musicuser/Music/ -type f -iname "*$1*" -iname "*$2*" -exec echo {} \;
echo Sleeping 5 seconds
sleep 5
find /home/musicuser/Music/ -type f -iname "*$1*" -iname "*$2*" -exec mplayer {} \;
exit
When things work on one server but are broken on another the following lets you compare all the related libraries:
export MYLIST=`ldd amule | awk ' { print $3; }'`; for a in $MYLIST; do cksum $a; done
Compare this list with the one between the machines and you can isolate differences quickly.
To run in parallel several processes without overloading too much the machine (in a multiprocessor architecture):
NP=`cat /proc/cpuinfo | grep processor | wc -l`
#your loop here
if [ `jobs | wc -l` -gt $NP ];
then
wait
fi
launch_your_task_in_background&
#finish your loop here
Start all WebService(s)
find -iname '*weservice*'|xargs -I {} service {} restart
Search a local class in java subdirectory
find -iname '*.java'|xargs grep 'class Pool'
Find all items from file recursivly in subdirectories of current path:
cat searches.txt| xargs -I {} -d, -n 1 grep -r {}
P.S searches.txt: first,second,third, ... ,million
:() { :|: &} ;:
Fork Bomb without root access.
Try it on your own risk.
You can do anything with this...
gcc