The error message below i get when I"m trying to create a new user in a project management system we use for a client. I type in all the corresponding information then when I click create it throws this error.
The following message may help in diagnosing the problem: Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.Web.Administration.WebAdminMembershipProvider.CallWebAdminMembershipProviderHelperMethodOutParams(String methodName, Object[] parameters, Type[] paramTypes) at System.Web.Administration.WebAdminMembershipProvider.CreateUser(String username, String password, String email, String passwordQuestion, String passwordAnswer, Boolean isApproved, Object providerUserKey, MembershipCreateStatus& status) at System.Web.UI.WebControls.CreateUserWizard.AttemptCreateUser() at System.Web.UI.WebControls.CreateUserWizard.OnNextButtonClick(WizardNavigationEventArgs e) at System.Web.UI.WebControls.Wizard.OnBubbleEvent(Object source, EventArgs e) at System.Web.UI.WebControls.CreateUserWizard.OnBubbleEvent(Object source, EventArgs e) at System.Web.UI.WebControls.Wizard.WizardChildTable.OnBubbleEvent(Object source, EventArgs args) at System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) at System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
What causes this error is the hard drive where all databases are being stored is full. Even if there is 1kb left it will post the error. To fix, install a much larger hard drive, or clear any unnecessary files from the hard drive and make free space. the server error or asp.net error you may see from this is the 9002 error. When the hard drive is full the databases log file cannot be written too, which when anything is done to the database, inserting, updating, etc. it is written to the log file. When there is no space left the log file cannot expand therefore throwing an error. I appreciate your help chriskent. By the way if anyone is wondering we had no room left literally not even 1kb to spare, our free space was 0kb. Hope this helps.
Do you have a machine key element in your web.config? Ensure this is specifically set (Not autogenerate). Check this thread for more information:
http://forums.asp.net/t/1213872.aspx
Related
Application_End() is invoked when my application pool is stopped which can happen for a number of reasons, including automatic pool recycle or changes in the folder from which the application is served.
The call stack will typically looks like this:
my Application_End(Object sender, EventArgs e)
at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Reflection.MethodBase.Invoke(Object obj, Object[] parameters)
at System.Web.HttpApplication.InvokeMethodWithAssert(MethodInfo method, Int32 paramCount, Object eventSource, EventArgs eventArgs)
at System.Web.HttpApplication.ProcessSpecialRequest(HttpContext context, MethodInfo method, Int32 paramCount, Object eventSource, EventArgs eventArgs, HttpSessionState session)
at System.Web.HttpApplicationFactory.Dispose()
at System.Web.HttpRuntime.Dispose()
at System.Web.HttpRuntime.ReleaseResourcesAndUnloadAppDomain(Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()
which is completely useless.
How do I programatically find why it was called?
There's System.Web.Hosting.HostingEnvironment.ShutdownReason property that indicates why the application is being terminated. Its value can be retrieved from inside Application_End().
I keep getting the following error when trying to run an application in the production environment with "anonymous" authentication and hardcoded username.
When I turn on basic authentication, which then prompts for username/password everything works like a charm. but I need to get the hardcoded version to work as well. Can't figure out whats going on.
Everything works perfectly on another server.
Exception Details: System.DirectoryServices.DirectoryServicesCOMException: An operations
error occurred.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of
the exception can be identified using the exception stack trace below.
Stack Trace:
[DirectoryServicesCOMException (0x80072020): An operations error occurred.]
System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail) +781
System.DirectoryServices.DirectoryEntry.Bind() +44
System.DirectoryServices.DirectoryEntry.get_SchemaEntry() +49
System.DirectoryServices.AccountManagement.ADStoreCtx.IsContainer(DirectoryEntry
de) +62
System.DirectoryServices.AccountManagement.ADStoreCtx..ctor(DirectoryEntry
ctxBase, Boolean ownCtxBase, String username, String password,
ContextOptions options) +123
System.DirectoryServices.AccountManagement.PrincipalContext.CreateContextFromDirectoryEntry(DirectoryEntry
entry) +234
System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInit()
+497
[PrincipalOperationException: An operations error occurred.]
System.DirectoryServices.AccountManagement.PrincipalContext.DoLDAPDirectoryInit()
+534256
System.DirectoryServices.AccountManagement.PrincipalContext.DoDomainInit()
+61
System.DirectoryServices.AccountManagement.PrincipalContext.Initialize()
+141
System.DirectoryServices.AccountManagement.PrincipalContext.get_QueryCtx()
+42
System.DirectoryServices.AccountManagement.Principal.FindByIdentityWithTypeHelper(PrincipalContext
context, Type principalType, Nullable`1 identityType, String
identityValue, DateTime refDate) +27
System.DirectoryServices.AccountManagement.GroupPrincipal.FindByIdentity(PrincipalContext
context, String identityValue) +95
SERT_BO.ADHelper.UserBelongsToGrp(String adGroup, String sAMAccountName, String& emailAddr, String& fullName) in
D:\SERT\BusinessObjects\SERT_BO\ADHelper.cs:199
SERT_BO.UserSession.GetUserSession(String userName) in D:\SERT\BusinessObjects\SERT_BO\UserSession.cs:44
SERT.SetUserSession.Page_Load(Object sender, EventArgs e) in D:\SERT\SERT\SERT\SetUserSession.aspx.cs:23
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25
System.Web.UI.Control.LoadRecursive() +71
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
+3064
One thing to check is that the AppPool in which the ASP.NET app is running has the right privileges. As a quick test you can set the identity of the AppPool to Local System and see if this solves the issue. If the problem is here, then you can set the application pool identity to a (domain?) user that has enough privileges on this server.
looks like the issue was that the server was looking at the wrong AD controller. it had to be written out COMPLETELY.
I want to Minus to value in FastReport.Net in footer.
my Code :
private void PageFooter1_BeforeLayout(object sender, EventArgs e)
{
Text22.Text=Convert.ToString(Convert.ToDouble(Text12.Text)-Convert.ToDouble(Text3.Text));
}
and this error was occurs:
FastReport.Net v1.7.33
Exception has been thrown by the target of an invocation.
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.FormatException: Input string was not in a correct format.
at System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt)
at FastReport.ReportScript.PageFooter1_BeforeLayout(Object sender, EventArgs e)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at FastReport.Code.ExpressionDescriptor.Invoke(Object[] parameters)
at FastReport.BandBase.CalcHeight()
at FastReport.Engine.ReportEngine.ShowBandToPreparedPages(BandBase band, Boolean getData)
at FastReport.Engine.ReportEngine.ShowBand(BandBase band, Boolean getData)
at FastReport.Engine.ReportEngine.EndLastPage()
at FastReport.Engine.ReportEngine.RunReportPage(ReportPage page)
at FastReport.Engine.ReportEngine.RunReportPages()
at FastReport.Engine.ReportEngine.RunReportPages(ReportPage page)
at FastReport.Engine.ReportEngine.Run(Boolean runDialogs, Boolean append, ReportPage page)
at FastReport.Report.Prepare(Boolean append)
at FastReport.Design.ReportTab.Preview()
can anyone help me ?
You can try to do DataTextFormatString="{0:Axx}", and put the code into the BeforePrint event.
For example:
private void Text14_BeforePrint(object sender, EventArgs e)
{
Text14.Text=string.Format("{0:N}",((Decimal)Report.GetColumnValue("Table.money"))-((Decimal)Report.GetColumnValue("Table.TRSMONEY")));
}
I'm using Activedirectory as membership provider. I want to store the current logged in user in a session.
protected void user_login_LoggedIn(object sender, EventArgs e)
{
MembershipUser user = Membership.GetUser();
}
the code above gives the error below
The parameter 'username' must not be empty.
Parameter name: username
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details:
System.ArgumentException: The parameter 'username' must not be empty.
Parameter name: username
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[ArgumentException: The parameter 'username' must not be empty.
Parameter name: username]
System.Web.Util.SecUtility.CheckParameter(String& param, Boolean checkForNull, Boolean checkIfEmpty, Boolean checkForCommas, Int32 maxSize, String paramName) +1976411
System.Web.Security.ActiveDirectoryMembershipProvider.CheckUserName(String& username, Int32 maxSize, String paramName) +30
System.Web.Security.ActiveDirectoryMembershipProvider.GetUser(String username, Boolean userIsOnline) +86
System.Web.Security.Membership.GetUser(String username, Boolean userIsOnline) +82
System.Web.Security.Membership.GetUser() +19
darts.login.user_login_LoggedIn(Object sender, EventArgs e) in E:\Projects\DARTS\source\darts\darts\login.aspx.cs:24
System.Web.UI.WebControls.Login.OnLoggedIn(EventArgs e) +111
System.Web.UI.WebControls.Login.AttemptLogin() +179
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +101
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +37
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +118
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +166
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565
Version Information: Microsoft .NET Framework Version:2.0.50727.4211; ASP
Edit:
Based upon using this from ASP.NET to get the login information about the currently authenticated user, I see a couple ways that this might work. First, if you are using Forms authentication with the Active Directory membership provider, you could capture the username there. Then you just put the username inside of the GetUser() method like so: GetUser(yourUser) and you should get the information needed.
If this isn't an option, I believe the username information is stored under your login control (in your case, I believe the name is user_login if you are indeed using a login control). You would simply say user_login.username and put that inside the GetUser() method.
Finally, you could try the old fallback of HttpContext.Current.User.Identity.Name and put that inside of your GetUser() method.
I have a website with several languages in a database. From the database I use ResXResourceWriter to create my .resx files. This is working really good but sometimes I get this exception:
MESSAGE: Cannot access a closed resource set.
SOURCE: mscorlib
FORM:
QUERYSTRING:
TARGETSITE: System.Object GetObject(System.String, Boolean, Boolean)
STACKTRACE: at System.Resources.RuntimeResourceSet.GetObject(String key, Boolean ignoreCase, Boolean isString)
at System.Resources.RuntimeResourceSet.GetString(String key, Boolean ignoreCase)
at System.Resources.ResourceManager.GetString(String name, CultureInfo culture)
at System.Linq.Expressions.Expression.ValidateStaticOrInstanceMethod(Expression instance, MethodInfo method)
at System.Linq.Expressions.Expression.Call(Expression instance, MethodInfo method, IEnumerable`1 arguments)
at System.Data.Linq.DataContext.GetMethodCall(Object instance, MethodInfo methodInfo, Object[] parameters)
at System.Data.Linq.DataContext.ExecuteMethodCall(Object instance, MethodInfo methodInfo, Object[] parameters)
at Business.DatabaseModelDataContext.Web_GetMostPlayedEvents(String cultureCode)
at Presentation.Default.Page_Load(Object sender, EventArgs e)
at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I don't know why this is happening or how to solve it. Does anyone know anything about this?
Thanks,
Philip
I suspect you closed your DataSource prematurely or didn't close it at all when your program routine is about to end?