I want a debug function to do this, but I'm unaware of whether one already exists. Going through and using 'drop table' for each of my tables will be a pain.
Help appreciated.
Since the database is just one file, you can indeed just erase it. If you want something more automatic, you can use the following to do it all programmatically:
Recover your schema:
SELECT group_concat(sql,';') FROM sqlite_master;
Disconnect from the database
Delete the database file
Create your schema again with what was returned from the above query
If you used any particular options for your original database (page_size, etc), they will have to be declared manually as well.
to "drop database" for sqlite, simply delete the database file (and recreate if needed)
Related
I have an Ionic App using SQLite. I don't have any problems with implementation.
The issue is that I need to import an SQL file using SQLitePorter to populate the database with configuration info.
But also, on the same database I have user info, so my question is:
Everytime I start the app, it will import the sql file, fill the database and probably overwrite my user data too? Since it is all on the same base?
I assume that you can always init your table using string queries inside your code. The problem is not that you are importing a .sql file. Right?
According to https://www.sqlitetutorial.net/sqlite-create-table/ it is obvious that you always create a table with [IF NOT EXISTS] switch. Writing a query like :
CREATE TABLE [IF NOT EXISTS] [schema_name].table_name (
column_1 data_type PRIMARY KEY);
you let sqlite to decide if it's going to create a table with the risk to overwrite an existing table. It is supposed that you can trust that sqlite is smart enough, not to overwrite any information especially if you use 'BEGIN TRANSACTION' - 'COMMIT' procedure.
I give my answer assuming that you have imported data and user data in distinct tables, so you can manipulate what you populate and what you don't. Is that right?
What I usually do, is to have a sql file like this:
DROP TABLE configutation_a;
DROP TABLE configutation_b;
CREATE TABLE configutation_a;
INSERT INTO configutation_a (...);
CREATE TABLE configutation_b;
INSERT INTO configutation_b (...);
CREATE TABLE IF NOT EXIST user_data (...);
This means that every time the app starts, I am updating with the configuration data I have at that time (that's is why we use http.get to get any configuration file from a remote repo in the future) and create user data only if user_data table is not there (hopefully initial start).
Conclusion: It's always a good practice, in my opinion, to trust a database product 100% and abstractly let it do any transaction that might give you some risk if you implemented your self in your code; since it gives a tool for that.For example, the keyword [if not exists], is always safer than implementing a table checker your self.
I hope that helps.
PS: In case you refer in create database procedure, SQLite, connects to a database file and it doesn't exist, it creates it. For someone comfortable in sqlite command line, when you type
sqlite3 /home/user/db/configuration.db will connect you with this db and if the file is not there, it will create it.
I wanted to add a constraint to an existing column in my SQLite database. However, I read that it is not possible to do so.
I tried the solution from How do I rename a column in a SQLite database table?, but there seems to be missing the copying of all the metadata.
I pretty much want an exact copy of a given table, except for the new constraints.
How does the INSERT command look like to copy all the metadata, thus the indexes will increase correctly, for example.
I'm not a heavy user of sqlite3, but you can use the command line to get the data and "create table" and "create index" commands. I am using the 'History' DB from the Google chrome browser which has a table called "visits". The 'mode insert' command says to provide output in a format that can be used to input this data. The '.schema visits' command says to show the 'create table' and 'create index' statements. The 'select..' statement gives you the data. The database I used doesn't seem to have any foreign key constraints, but they could very well be part of the 'create table' information if your DB has any.
sqlite3 History
.mode insert
.schema visits
select * from visits;
I have created a database "MyDB.sqlite" using the command line sqlite3 MyDB.sqlite in a specific folder(my desktop) and then created a table "tbl11" using create table syntax. I am able to insert record and can check the inserted records.
But when I exit command (terminal in Mac) line and re enter I can't see my database and tables in that folder. I guess this database and table are temporary by default. I even check the .databases command to see the database, but I can only see two database main!
please help!
Be sure to finish off with COMMIT; :-)
For practice, work through the short working example at http://souptonuts.sourceforge.net/readme_sqlite_tutorial.html
Good luck.
I am running a SQLite database in memory and I am attempting to drop a table with the following command.
DROP TABLE 'testing' ;
But when I execute the SQL statement, I get this error
SQL logic error or missing database
Before I run the "Drop Table" query I check to make sure that the table exists in the database with this query. So I am pretty sure that the table exists and I have a connection to the database.
SELECT count(*) FROM sqlite_master WHERE type='table' and name='testing';
This database is loaded in to memory from a file database and after I attempt to drop this table the database is saved from memory to the file system. I can then use a third party SQLite utility to view the SQLite file and check to see if the "testing" exists, it does. Using the same 3rd party SQLite utility I am able to run the "Drop TABLE" SQL statement with out error.
I am able to create/update tables without any problems.
My questions:
Is there a difference between a memory database and a file database in SQLite when dropping a table?
Is there a way to disable the ability to drop a table in SQLite that I may have accentually turned on somehow?
Edit: It appears to have something to do with a locked table. Still investigating.
You should not have quotes in your DROP TABLE command. Use this instead:
DROP TABLE testing
I had the same problem when using Sqlite with the xerial jbdc driver in the version 3.7.2. and JRE7
I first listed all the tables with the select command as follows:
SELECT name FROM sqlite_master WHERE type='table'
And then tried to delete a table like this:
DROP TABLE IF EXISTS TableName
I was working on a database stored on the file system and so it seems not to effect the outcome.
I used the IF EXISTS command to avoid listing all the table from the master table first, but I needed the complete table list anyway.
For me the solution was simply to change the order of the SELECT and DROP.
I need to modify a column in a SQLite database but I have to do it programatically due to the database already being in production. From my research I have found that in order to do this I must do the following.
Create a new table with new schema
Copy data from old table to new table
Drop old table
Rename new table to old tables name
That seems like a ridiculous amount of work for something that should be relatively easy. Is there not an easier way? All I need to do is change a constraint on a existing column and give it a default value.
That's one of the better-known drawbacks of SQLite (no MODIFY COLUMN support on ALTER TABLE), but it's on the list of SQL features that SQLite does not implement.
edit: Removed bit that mentioned it may being supported in a future release as the page was updated to indicate that is no longer the case
If the modification is not too big (e.g. change the length of a varchar), you can dump the db, manually edit the database definition and import it back again:
echo '.dump' | sqlite3 test.db > test.dump
then open the file with a text editor, search for the definition you want to modify and then:
cat test.dump | sqlite3 new-test.db
As said here, these kind of features are not implemented by SQLite.
As a side note, you could make your two first steps with a create table with select:
CREATE TABLE tmp_table AS SELECT id, name FROM src_table
When I ran "CREATE TABLE tmp_table AS SELECT id, name FROM src_table", I lost all the column type formatting (e.g., time field turned into a integer field
As initially stated seems like it should be easier, but here is what I did to fix. I had this problem b/c I wanted to change the Not Null field in a column and Sqlite doesnt really help there.
Using the 'SQLite Manager' Firefox addon browser (use what you like). I created the new table by copying the old create statement, made my modification, and executed it. Then to get the data copied over, I just highlighted the rows, R-click 'Copy Row(s) as SQL', replaced "someTable" with my table name, and executed the SQL.
Various good answers already given to this question, but I also suggest taking a look at the sqlite.org page on ALTER TABLE which covers this issue in some detail: What (few) changes are possible to columns (RENAME|ADD|DROP) but also detailed workarounds for other operations in the section Making Other Kinds Of Table Schema Changes and background info in Why ALTER TABLE is such a problem for SQLite. In particular the workarounds point out some pitfalls when working with more complex tables and explain how to make changes safely.