I want to add a handler to my existing web form application.
Following this walkthrough in web.config I've added:
<configuration>
<system.web>
<httpHandlers>
<add verb="post" path="redirect.ashx" type="RedirectHandler"/>
</httpHandlers>
</system.web>
</configuration>
I've created a Generic Handler (called RedirectHandler.ashx) in App_Code folder,
but when I run the application (VS2017) it causes a 500.
The tutorial makes a distinction between registering in IIS 6.0 and IIS 7.0. I'm not sure which one applies to me considering that VS runs IIS Express 10.0. Anyway, I've already tried both with poor results.
I'm a noobie to web forms but it seems pretty straightforward. I don't understand why it doesn't work.
EDIT: Creating a new project and adding httphandlers doesn't cause any issue. So it must be some configuration with my current project but I have no idea what may cause the error.
EDIT 2: To answer at the 500 error, the problem was caused by the wrong "type" in httpHandlers. Type should be "Namespace.class".
This post really helped me to figure out a few things.
I'm using ASP.NET Core RC1 as server to host my Aurelia app. My app was working just fine but the last couple of weeks something changed so that the app does no longer load when hosted on Azure. I'm not sure if it is something I changed or if it's a change on the Azure side but I'm leaning towards the latter.
I've narrowed down the problem quite a bit. The app runs fine locally, with ASP.NET Core Kestrel server and also other servers (e.g. webpack-dev-server). I have continuous deployment setup from Visual Studio Team Services to an Azure Website. The app is published and a web.config is automatically created in my wwwroot:
<configuration>
<system.webServer>
<handlers>
<add name="httpplatformhandler" path="*" verb="*" modules="httpPlatformHandler" resourceType="Unspecified" />
</handlers>
<httpPlatform processPath="%home%\site\approot\web.cmd" arguments="" stdoutLogEnabled="true" stdoutLogFile="\\?\%home%\LogFiles\stdout.log"></httpPlatform>
</system.webServer>
</configuration>
Nothing happens when I navigate to my site, e.g. http://demo.azurewebsites.net/. When looking at the console I get a 404. Once I actually got this error but I can't seem to bring it back: 502 - Web server received an invalid response while acting as a gateway or proxy server
I have index.html set as default document but it is not loading. If I enter it explicitly, the app works: http://demo.azurewebsites.net/index.html
If I remove the httpplatformhandler from the web.config, then it works as expected (index.html is loaded automatically). The same happens when I remove the web.config entirely. In these cases the MVC 6 WebAPI behind the scenes does not work at all. I assume that's just logical since I remove the platform handler.
So, why is this httpplatformhandler added? Is it necessary? Why is it created? Is there some setting in the Azure portal that I can adjust to prevent this handler to be configured like this?
I also found this link that seems to suggest that things are changing and that this httpplatformhandler is about to be replaced: Closer Look: Hosting ASP.NET Core on Azure App Service
I'm out on deep water here and any and all help is appreciated.
To get default document support with the static file server middleware you need to use app.UseFileServer() instead of app.UseStaticFiles()
I am replicating web application deployment and found several issues related to HTTP Error 500.19. My machine is running Windows 7 while the working development is using Windows 8. We're developing our Web Application using Visual Studio 2010.
First, I got error code 0x80070021, similar as posted here.
I update my web.config according to the accepted answer and then I got following error code (which is similar as posted here).
HTTP Error 500.19 - Internal Server Error
Error Code 0x8007000d
Config Source -1: 0:
I have read the symptoms definition in Microsoft support page and cause of the error is:
This problem occurs because the ApplicationHost.config file or the Web.config file contains a malformed XML element.
and the solution is
Delete the malformed XML element from the ApplicationHost.config file or from the Web.config file.
However, the web.config that I used is working perfectly in the original development environment.
Here is what I have checked and tried so far:
Install ASP.NET by calling aspnet_regiis -i
Set my application to use different application pool (ASP.NET v4.0, .NET v4, etc)
ApplicationHost.config file is still using default from Windows 7.
This is part of my Web.Config
<system.webServer>
<section name="handlers" overrideModeDefault="Allow" />
<section name="modules" allowDefinition="MachineToApplication" overrideModeDefault="Allow" />
<validation validateIntegratedModeConfiguration="false" />
<modules runAllManagedModulesForAllRequests="true">
</modules>
<handlers>
<remove name="UrlRoutingHandler" />
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</handlers>
<urlCompression doStaticCompression="true" doDynamicCompression="false"></urlCompression>
<directoryBrowse enabled="true" />
<defaultDocument>
<files>
<add value="Logon.aspx" />
</files>
</defaultDocument>
</system.webServer>
I have read similar/duplicates/closed posts (around 13) posts in stackoverflow, tried all except the answer related to Ajax (is it related) and still have no clue on what the error is.
Does anyone one how to fix this error? (And if possible, a comprehensive lists of things need to be checked so we can reduce similar posts like this.) I am ready to provide more details.
Error 0x8007000d means URL rewriting module (referenced in web.config) is missing or proper version is not installed.
Just install URL rewriting module via web platform installer.
I recommend to check all dependencies from web.config and install them.
When trying to set up a .NET Core 1.0 website I got this error, and tried everything else I could find with no luck, including checking the web.config file, IIS_IUSRS permissions, IIS URL rewrite module, etc. In the end, I installed DotNetCore.1.0.0-WindowsHosting.exe from this page: https://www.microsoft.com/net/download and it started working right away.
Specific link to download: https://go.microsoft.com/fwlink/?LinkId=817246
Yes, for .net core apps, install dotnet hosting. This worked for me.
And here it is for .net6
And now if you need .net7
Install URL rewriting:
UPDATE - this is now available here (and works with IIS 7-10):
https://www.iis.net/downloads/microsoft/url-rewrite
Ensure you have the following set to 'Allowed' for your IIS server:
In my case, because I had reinstalled iis, I needed to register iis with dot net 4 using this command:
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
In my case (.Net Core Web API) for this issue HTTP Error 500.19 – Internal Server Error 0x8007000d
First download dotnet-hosting-3.0.0-preview5-19227-01-win (.Net Core 3) or dotnetcore 2 hasting windows
https://download.visualstudio.microsoft.com/download/pr/5bed16f2-fd1a-4027-bee3-3d6a1b5844cc/dd22ca2820fadb57fd5378e1763d27cd/dotnet-hosting-3.1.4-win.exe
Any .net core 3.1 application either angular or mvc application would need this.
Second install it as Administrator
Open cmd as administrator, type iisreset, press enter
So refresh your localhost app
Best regard
M.M.Tofighi from Iran
A repair of the DotNetCore hosting bundle did the trick for me. :/
Installing ASP.NET Core Runtime Hosting Bundle solved the issue for me. Source: 500.19 Internal Server Error (0x8007000d)
Kind of late to the party here, but I have just been struggling with the exact same issue (symptoms) and cursing the lack of error detail reporting.
It worked fine on IIS 8+ machines but Win 7 got these INSTANT HTTP 500.19 errors.
For me it was as silly as having an unsupported configuration element in the config file:
<applicationInitialization doAppInitAfterRestart="true">
<add initializationPage="/" />
</applicationInitialization>
So while running old web.config files worked fine, I just diffed them and started chopping away at new blocks until I got the page to start loading. Had I seen this as an answer I would have gone this route immediately as I knew none of the popular solutions were relevant. So there you go :)
I turn on .Net Framework 3.5 and 4.5 Advance Service in Control Panel->Programs and Features->Turn Windows features on or off.it work for me.
Problem solved. Here are the steps that I tried:
Enable the 32-bit application in IIS -> Application pool -> Advanced settings
Copy System.EnterpriseServices.dll and System.EnterpriseServices.Wrapper.dll from C:\Windows\Microsoft.NET\Framework\v2.0.50727 to the application bin folder
Do comments/uncomments to sections on the web.config and found that problem related to the referenced DLL.
The config that I commented the previous one that I added:
<section name="handlers" overrideModeDefault="Allow" />
<section name="modules" allowDefinition="MachineToApplication" overrideModeDefault="Allow"/>
Add the required FasterFlect.DLL used by Combres.DLL v2.1.0.0 to the application bin folder (shall download the full zip from Combres codeplex, because the required fasterflect DLL V2.0.3732.24338 cannot be found in fasterflect codeplex) and other DLLs. For convinience, use the full Combres.DLL (1,3MB)
Check that the DLL versions and public key tokens are configured correctly in web.config using tool, e.g. .NET Reflector
I understand that this error can occur because of many different reasons. In my case it was because I uninstalled WSUS service from Server Roles and the whole IIS went down. After doing a bit of research I found that uninstalling WSUS removes a few dlls which are used to do http compression. Since those dlls were missing and the IIS was still looking for them I did a reset using the following command in CMD:
appcmd set config -section:system.webServer/httpCompression /-[name='xpress']
Bingo! The problem is sorted now. Dont forget to run it as an administrator. You might also need to do "iisreset" as well. Just in case.
Hope it helps others.
Cheers
I had this problem with a brand new web service. Solved it by adding read-only access for Everyone on Properties->Security for the folder that the service was in.
I had the exact same error. It turned out that it was something was caused by something completely, though. It was missing write permissions in a cache folder. But IIS reported error 0x8007000d which is wildly confusing.
I have the same problem when I was trying to publish asp.net core 5.0 web app on my local IIS and the solution was to add the following inside System.webserver tag in my web.config file
<applicationInitialization doAppInitAfterRestart="true">
<add initializationPage="/" />
</applicationInitialization>
Reinstalling ASP.NET Core Runtime - Windows Hosting Bundle Installer made the trick for me... I belive the "ASP.NET Core Module" was missing.
For me I had a web.config file in one my root folders, this config file was for the live server so removing it allowed the site to run on the dev server.
So check for any web.config files in folders too.
In my case, i have installed dotnet hosting but error change to HTTP Error 503. The service is unavailable, but after install windows update KB2999226 and dotnet sdk, its work!
follow the procedure chronologically or it might fail due to missing or errors in redirecting.
install Runtime bundle e.g.. dotnet-sdk-7.0....
2.turn asp services on and internet services"Turn Windows features on or off" to enable IIS
3.install web hosting bundle iis 7.0 e.g dotnet-hosting-7.0.2...
this worked for me
For me, it was all about setting up my web server to use the latest-and-greatest tech to support my ASP.NET 5 application!
The following URL gave me all the tips I needed:
https://docs.asp.net/en/1.0.0-rc1/publishing/iis-with-msdeploy.html
Hope this helps :)
I've used the UrlRewriting.Net module for a couple years now without any problems in Windows XP and Windows 2003. I just recently upgraded my home PC to Windows 7 and started developing a new website.
The plan was to use .html extensions and rewrite them to their .aspx counterparts using the UrlRewriting.Net module. Everything works flawlessly in VWD 2008, but when I try running it through IIS7 it is a different story.
When I try to access a page via the .html rewrite I can no longer access Page.User; it keeps returning null. If I hit the page using it's .aspx extension, Page.User is correctly populated. I should also mention that I have a LoginView controller in my Master Page and it suffers from the same symptoms: When accessing via .html extension it shows the AnonyousTemplate; When using .aspx extension it properly shows the LoggedInTemplate. I'm guessing the two are related.
[Note: I've also tried extensionless URLs and they exhibit the same problem]
The only way I've gotten it to work is to switch the application pool to Classic, which then requires me to add an ASP.Net ddl handler for the .html extension [otherwise it is handled by the StaticFileHandler and comes up as a 404 error]. However, I'd like my web app to run properly for people without having to fiddle around with IIS.
So I am left with several questions:
Does anyone have ideas as to why Page.User always equals null for .html => .aspx rewritten pages?
Why does it work in VWD 2008, but not IIS7?
What changed from IIS6 => IIS7 that could have caused this?
Any other thoughts on workarounds?
[Note: I just tried a .aspx => .aspx rewrite and it did not exhibit the problem. Not really what I want, but thought I should mention it.]
Just had a breakthrough with the UrlRewriting.Net module. This makes it work in Integrated Mode in IIS7:
<modules runAllManagedModulesForAllRequests="true">
After figuring it out I did a search on "runAllManagedModulesForAllRequests" and the first thing that popped up was Scott Guthrie's blog which actually talks about using it for this purpose.
Another approach that seems to work is to remove the Session module and readd it leaving the "Invoke only for requests to ASP.NET applications or managed handlers" checkbox unchecked. It looks like this in the web.config file:
<system.webServer>
<modules>
<remove name="Session" />
<add name="SessionManualAdd" type="System.Web.SessionState.SessionStateModule, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</modules>
</system.webServer>
It seems the problem is that the Session module doesn't execute for say '*.htm' files when HttpContext.RewritePath is used, but removing and readding the module in this fashion causes the Session handler to be executed for the request.
This solution was suggested on the thread below. Unfortunately Microsoft chose not to explain the reasoning behind this behavior fully:
http://connect.microsoft.com/VisualStudio/feedback/details/357248/context-rewritepath-disables-session-module-in-iis7
Microsoft included a fix for this issue (at least for extensionless urls) in Service Pack 1 for Win7 and Windows Server 2008 R2:
http://www.microsoft.com/download/en/details.aspx?id=5842
Also available as a hotfix: http://support.microsoft.com/kb/980368
After this patch is applied, ASP.NET 4 applications can handle requests for extensionless URLs. Therefore, managed HttpModules that run prior to handler execution will run. In some cases, the HttpModules can return errors for extensionless URLs. For example, an HttpModule that was written to expect only .aspx requests may now return errors when it tries to access the HttpContext.Session property.
After applying SP1 or the hotfix, no web.config changes are needed to make the session and forms auth work for extensionless URLs rewritten to asp.net pages/handlers/etc.
I don't know if this fixes anything for rewrites to static file extensions like .htm. My guess is, probably not. I would try to avoid setting runAllManagedModulesForAllRequests="true" in production environments, because it adds unnecessary overhead on static file requests.
I'm trying to get a custom handler to work for a specific URL (or set of URLs) in ASP.NET 3.5.
The handler doesn't actually do anything significant yet - it just logs the request. I can post the code if anyone things it's relevant, but I really don't think it's being called at all. (In particular, for normal exceptions I get a custom error page and logging... here I'm just getting the vanilla IIS 404.)
Here's the relevant bit of the web.config file:
<system.web>
<httpHandlers>
<add verb="GET,POST" path="*.robot" validate="false"
type="CSharpInDepth.Wave.RobotHandler, CSharpInDepth"/>
</httpHandlers>
</system.web>
(Obviously there's other stuff in that section too, but I don't think it's relevant.)
Locally, running under the dev server, it works fine. On my real box, I always get a 404. Everything under the web site directory itself is the same (replicated via svn). That includes the bin directory containing CSharpInDepth.dll, which I've verified contains CSharpInDepth.Wave.RobotHandler.
I try to fetch http://csharpindepth.com/foo.robot and just get a 404.
I've tried with and without the assembly name, specific URLs or wildcarded ones... nothing's working.
I'm sure I've just missed some simple flag somewhere in the IIS configuration, but I'm blowed if I can find it...
EDIT: It's IIS version 6. Attempting to add *.robot to the ISAPI filter now...
Well if the hosting box is IIS7 in integrated pipeline you need to add it into the other bit of the config:
<system.webmodules>
....
<modules>
<add name="RobotHandler" type="CSharpInDepth.Wave.RobotHandler, CSharpInDepth"/>
</modules>
....
</system.webmodules>
If it's IIS6 then you'll need to map *.robots to the ASP.NET ISAPI DLL.
(For the non-Skeets you do this as follows)
Open up IIS admin.
Right click on
the Web site you want to configure
and select Properties form the
context menu. This will display the
Web Site Properties dialog.
Select
the Home Directory tab and click the
Configuration button. This will
display the Application
Configuration dialog box.
Click
Add.
Select the aspnet_isapi.dll
from the .NET framework directory,
the extension you want mapped and
either All Verbs, or just the ones
you want to map.
Click ok.
Jon,
You'll have to configure the IIS script mappings to pass *.robot to aspnet_isapi.dll.