Hi Guys I'm debugging some CS program and to view the performance of the application in slow internet I tried many different ways. However the best would be the Server and the client be in the same PC ---- my debugging environments for both the server side and the client is setup in one PC.
So I'm wondering is there anyway to limit the speed? I'm using TCP but I don't know too much in-depth knowledge of it.
Thank you
There are two important factors regarding a "slow" internet connection that you need to test out since they have different implications for your application: bandwidth and latency.
If you provide some more details about what os you are running your tests on, it would be easier to recommend a way to limit the network performance.
On a related side note, it's generally a bad idea to performance test any kind of networking using the loopback device on your machine, since many aspects of this will perform very different than the regular network device on your machine.
You mention in the comments this needs to be done on windows, while the Network Emulators I know of (e.g. netem, TCN, other variants) all require Linux. So one thing you could do is create a virtual machine (VirtualBox is fine, I did similar things with it), install linux on it, configure 2 network interfaces, emulate the slow/long/lossy/jittery network between them, and route the test traffic through it from windows.
Finally I found this does what I need.
http://www.nirsoft.net/utils/socket_sniffer.html
Captures Windows Socket traffic, no matter it's local or not.
Related
I'm currently looking at options to allow me to build a remote COM-port solution.
The idea is to be able to access from my remote PC, another PC that's directly connected to a device locally via its serial COM-port.
I know that the obivous answer is to use a VPN between the 2 Internet connected PCs.
However, I need this solution to be as seamless to the end-user as possible.
i.e. no installing and configuring VPN software, etc.
So I was thinking that WebRTC would be great because the end-user can simply use their web-browser and not have to install any additional software.
My question is, is it possible to stream the COM port data between the 2 PCs via WebRTC?
If so, can you please point me in the right direction as to how I can go about achieving this?
Sorry if this is a ridiculous question, I'm very new to WebRTC, just exploring my options.
Thanks.
That should work great!
Networking wise you get NAT Traversal. That means the two computers can be in completely different networks, and still communicate. You may have to run a TURN server if P2P isn't possible.
Data wise you can exchange anything you want via data channels. It is datagram based and you can send/receive binary data. You get a callback telling you how much has been delivered, that way you can detect backpressure.
Are you ok with installing software on the remote host? You can do something like Pion WebRTC's data-channels. This shows you can have a browser connect to a Go process via WebRTC. Then use tarm/serial on the remote host to interact with the device.
If you want a browser on both ends there is the Web Serial API I haven't used it myself though. That locks you into only doing Chromium which might be an issue.
I've been asked to implement VPN capabilities in an existing software project on an embedded system, in order to make the device available via network to an external server while avoiding trouble with firewalls (no need for encryption, just to make it accessible).
Unfortunately, the embedded system is based on a Cortex-M4 MCU, therefore Linux, which would allow for VPN nearly out of the box, is not an option. All I've got is an RTOS and a working LwIP stack.
I've used VPNs in the past. However, my network knowledge is rather limited concerning implementing VPNs, so I'm rather stumped. As I think, I'd use the current LwIP instance for building up the tunnel connection, and the application would use a second instance for the actual network communication, while the network interface of the second instance is a virtual one (like a tap device on linux), encapsulating its low level data and tranceiving it via the tunnel connection of the first LwIP instance.
Maybe this way I'd be able to create a custom solution for the problem, but the solution should conform to any standards (as the server will be any kind of sophisticated system).
So I wonder if anyone has been confronted with a task like this, and would appreciate any hint what to do, at least a direction where to look at.
Thanks in advance!
Is there any way to know any information about the Network Interface Cards (NIC) of servers in EC2?
I've tried a lot of commands that typically work in Linux, but seems it's all abstracted out when you try them on EC2 VMs.
Alternately, is there any way to characterize the performance of a NIC on a physical server that is hosting my VM (eg, to measure max throughput)? I was thinking there should be some tools for testing such things on a single server but I couldn't find any! (tools like iperf measure the bandwidth between two machines).
Thanks!
I'm not entirely sure testing the throughput of a nic would do much good since it seems to be variable. There is no official documentation on the subject. If you are service static content, S3 is your best bet. Otherwise use some sort of caching with varnish or something similar that you can scale out incase you are running into bandwidth issues.
I'm currently building a network monitoring system that will notify me if any interface errors or network issues. after building it we would like to be able to test if it works before implementing it to our network, so need a way of simulating network interface errors on a switch or networking device?
I was thinking about cutting ethernet cables or terminating them wrong, but ideally I need soemthing that can create loads of different types of interface errors
any help would be much appreciated
Sean
You could download Nagios which is a powerful, enterprise-class host, service, application, and network monitoring program. Designed to be fast, flexible, and rock-solid stable. Nagios runs on *NIX hosts and can monitor Windows, Linux/Unix/BSD, Netware, and network devices.
you can download other network monitoring systems from sourceforge they have many different network tools written in different languages most of them are open source. you can take notes of their
design and maybe add to the application you building.
if you want to test your application the best thing to do is to tested on real environment, I believe their might be one or two Virtual Lab.
But Ideally I would tested on real interfaces
One of the ways to simulate network failures would be to dynamically change the firewall settings. You can make packets drop, hosts, disappear, etc. This doesn't require any physical damage to anything :)
I have an old school foxpro web app that I am trying to help limp along while I rewrite the system. Every day, multiple times, I get this following error message: The specified network name is no longer available.
Does anyone have any suggestions how to troubleshoot this? Perhaps, prove to my IT guys that there really is a network issue. I have theories, but I have no idea how to prove anything, it always comes back to foxpro sucks rewrite it now.
I'll take any help, tools, and will answer any questions that may clarify this for you.
thanks
We have a very large multi-user VFP application on hundreds of sites. Occasionally you get this sort of problem. It is almost always down to environmental issues.
Had one just recently where a client had two machines continually crashing out of the VFP application. Network IT guys swearing up and down that it's not their problem. But what's this in the System Log of both machines? Why, it's the Broadcom NIC reporting a network link loss detected at the same times the application crashed.
Check if the client and server NICs in your situation can report this.
You could consider writing a small program that pings the network resource periodically. You might just look for a file and if the network is failing and the program cannot find the file email the folks in charge of the network and yourself. This would be an independent app, and best if not written in FoxPro so you can independently prove it is not the application or the language/tool it was written in.
I have seen this when networks have bad wiring, a bad port on the switch/hub, a failing NIC in the mix, and sometimes when the network is just flooded with requests from workstations.
You also did not mention if this was a wireless connection. I am hoping not, but I have seen wireless (especially slower wireless) hubs fail with respect to the network overload and slow and unreliable performance. Especially compared to a wired network.
Rick Schummer
In addition to the comments about IP address, is the setting on the network controller to be energy efficient? and thus turn itself off when not actively in use.