I have an ASP.NET Web API which works fine when running on "IIS Express" with localhost:1783
But when I uncross the "Use IIS Express" and then press "Create Virtual Directory"...
...I just get 404 errors:
Any ideas whats wrong? Thanks!
All you really need to add to the web.config file is:
<handlers>
<!-- Your other remove tags-->
<remove name="UrlRoutingModule-4.0"/>
<!-- Your other add tags-->
<add name="UrlRoutingModule-4.0" path="*" verb="*" type="System.Web.Routing.UrlRoutingModule" preCondition=""/>
</handlers>
Note that none of those have a particular order, though you want your removes before your adds.
The reason that we end up getting a 404 is because the Url Routing Module only kicks in for the root of the website in IIS. By adding the module to this application's config, we're having the module to run under this application's path (your subdirectory path), and the routing module kicks in.
For me, in addition to having runAllManagedModulesForAllRequests="true" I also had to edit the "path"
attribute below. Previously my path attribute was "*." which means it only executed on url's containing a dot
character. However, my application's url's don't contain a dot. When I switched path to "*" then it worked.
Here's what I have now:
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
<modules runAllManagedModulesForAllRequests="true">
<remove name="WebDAVModule"/>
</modules>
<handlers>
<remove name="WebDAV" />
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" />
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" />
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" path="*" verb="*" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" path="*" verb="*" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*" verb="*" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
</system.webServer>
You may need to install Hotfix KB980368.
This article describes a update that enables certain Internet Information Services (IIS) 7.0 or IIS 7.5 handlers to handle requests whose URLs do not end with a period. Specifically, these handlers are mapped to "." request paths. Currently, a handler that is mapped to a "." request path handles only requests whose URLs end with a period. For example, the handler handles only requests whose URLs resemble the following URL:
http://www.example.com/ExampleSite/ExampleFile.
After you apply this update, handlers that are mapped to a "*." request path can handle requests whose URLs end with a period and requests whose URLs do not end with a period. For example, the handler can now handle requests that resemble the following URLs:
http://www.example.com/ExampleSite/ExampleFile
http://www.example.com/ExampleSite/ExampleFile.
After this patch is applied, ASP.NET 4 applications can handle requests for extensionless URLs. Therefore, managed HttpModules that run prior to handler execution will run. In some cases, the HttpModules can return errors for extensionless URLs. For example, an HttpModule that was written to expect only .aspx requests may now return errors when it tries to access the HttpContext.Session property.
This issue can also happen due to the following
1.In the Web.Config
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
</system.webServer>
2.Make sure the following are available in the bin folder on the server where the Web API is deployed
•System.Net.Http
•System.Net.Http.Formatting
•System.Web.Http.WebHost
•System.Web.Http
These assemblies won't be copied in the bin folder by default if the publish is through Visual Studio because the Web API packages are installed through Nuget in the development machine. Still if you want to achieve these files to be available as part of Visual Studio publish then you need to set CopyLocal to True for these Assemblies
Some people say runAllManagedModulesForAllRequests="true" will have performance issues and MVC routing issues.
They suggest to use the following:
http://www.britishdeveloper.co.uk/2010/06/dont-use-modules-runallmanagedmodulesfo.html
http://bartwullems.blogspot.com/2012/06/optimize-performance-of-your-web.html
I have been battling this problem for a couple of days trying all kinds of things suggested. My dev machine was working fine, but the new machine I was deploying to was giving me the 404 error.
In IIS manager, I compared the handler mappings on both machines to realize that a lot of handlers were missing. Turns out that ASP.Net 5 was not installed on the machine.
For me, this issue was slightly different than other answers, as I was only receiving 404s on OPTIONS, yet I already had OPTIONS specifically stated in my Integrated Extensionless URL Handler options. Very confusing.
As others have stated, runAllManagedModulesForAllRequests="true" in
the modules node is an easy way to blanket-fix most Web API 404 issues - although I prefer #DavidAndroidDev 's answer which is much less intrusive. But there was something additional in my case.
Unfortunately, I had this set in IIS under Request Filtering in the site:
By adding the following security node to the web.config was necessary to knock that out - full system.webserver included for context:
<system.webServer>
<modules runAllManagedModulesForAllRequests="true">
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<remove name="OPTIONSVerbHandler" />
<remove name="TRACEVerbHandler" />
<remove name="WebDAV" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="*" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
<security>
<requestFiltering>
<verbs>
<remove verb="OPTIONS" />
</verbs>
</requestFiltering>
</security>
</system.webServer>
Although it's not the perfect answer for this question, it is the first result for "IIS OPTIONS 404" on Google, so I hope this helps someone out; cost me an hour today.
I had this problem with Blazor and .Net Core and found that incorporating the NavManagers "baseUrl" into my calls to the controller solved the issue regardless of using a Virtual Directory or the root website.
This worked for me!
string baseUrl = NavigationManager.BaseUri.ToString();
NavigationManager.NavigateTo(**baseUrl** + $"api/Download/DownloadFile?FileName="
+ sFilename, true);
I you are using Visual Studio 2012, download and install Update 2 that Microsoft released recently (as of 4/2013).
Visual Studio 2012 Update 2
There are some bug fixes in that update related to the issue.
I had as same problem . afer lot of R&D i found the problem.
but as long as your configuration are finne mean that aspnet 64 bit and the IIS well then
the only problem i saw is the path " web api taking the local directiry path" so that you need to avid it. by like this.. ~../../../api/products/
thank you very much for posting the problem. i leanred alot abt iis and other setting in config file.
For me I received a 404 error on my websites NOT using IIS Express (using Local IIS) while running an application that WAS using IIS Express. If I would close the browser that was used to run IIS Express, then the 404 would go away. For me I had my IIS Express project calling into Local IIS services, so I converted the IIS Express project to use Local IIS and then everything worked. It seems that you can't run both a non-IIS Express and Local IIS website at the same time for some reason.
Spend a whole week, after all the following setting worked ! and finally saved.
Removing the UrlScan from ISAPI fileters in IIS fixes the problem in our case
I developed an HttpHandler in order to count number of downloads for PDF files.
Now the problem is: How can I make IIS use my handler for PDF files?
For IIS 7 it does depend on which mode you are running IIS in. Microsoft has a great tutorial on this How to: Register HTTP Handlers which goes over all the different configuration scenarios but assuming you are running IIS 7 in integrated mode and your handler is a compiled binary you would need a web.config entry similar to the following:
<configuration>
<system.webServer>
<handlers>
<add name="pdfCountHandler" verb="*"
path="*.pdf"
type="<your handler class name>, <your handler assembly name>"
resourceType="Unspecified" />
</handlers>
</system.webServer>
</configuration>
I need to write a HttpHandler that will serve up JavaScript files which are embedded resources in .DLLs in my project. A reference in a view cannot directly see such a resource, so I planned to use a HttpHandler module that would intercept any request with a path /js/[file] , find a matching embedded file and return the script.
The problem is that my HttpHandler code is never called, despite trying lots of different settings in the section of web.config. I'm obviously missing something but with no error messages I cannot see what that is. All I ever get is a 404 from the static file handler.
Q1) Am I missing something obvious?
Q2) Is there a way to get IIS to tell me why it is not calling my handler?
Summary: I am testing on IIS Express (v8) for an ASP.NET MVC 4 application.
I created a simple library that implements IHttpHandler and added a reference to this in my test MVC application, and the following lines in web.config:
<system.webServer>
<validation validateIntegratedModeConfiguration="true" />
<handlers>
<add name="ejs" path="js/*" verb="*" type="EmbeddedJsHandler.EmbeddedJsHandler, EmbeddedJsHandler" preCondition="integratedMode" />
The library is there, but it is never called. Any request with /js/test.js or whatever just results in a 404 error.
So far I've tried lots of different configurations and settings in the handler code. I've tried preCondition, resourceType="Unspecified", modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll"
I've tried paths:
js/*.js
js/*
js/*.*
I've checked the integrated mode settings section (in system.webServer) is being used, and confirmed it is.
I've searched stack overflow for similar cases, and tried many of the possible solutions.. still no joy.
Heck even Jon Skeet has these sort of problems!
Why isn't my IHttpHandler being called?
Finally figured it out by accident - it was a missing routes.IgnoreRoute() in the RouteConfig.cs file - the MVC routing engine wasn't configured to ignore this path, so was passing it to the static file handler.
Doh!
Check this:
How to: Register HTTP Handlers:
To register an HTTP handler for IIS 7.0 running in Integrated Mode:
Compile the HTTP handler class and copy the resulting assembly to the Bin folder under the application's root folder.
In the application's Web.config file, create a handlers element in the system.webServer section.
The following example shows how to register an HTTP handler that responds to requests for the SampleHandler.new resource. The handler is defined as the class SampleHandler in the assembly SampleHandlerAssembly.
<configuration>
<system.webServer>
<handlers>
<add name="SampleHandler" verb="*"
path="SampleHandler.new"
type="SampleHandler, SampleHandlerAssembly"
resourceType="Unspecified" />
</handlers>
</system.webServer>
</configuration>
Note: The resourceType attribute performs the same function as the Verify file exists option in IIS manager for IIS 6.0.
For IIS 7.0 running in Integrated mode, only the registration in the handlers element is required.
I cannot tell you directly why your handler isn't working, but I will give you an example of a handler we use and works for us:
<system.webServer>
<handlers>
<add name="JS handler" path="*.js" verb="*" type="Handlers.Minifiers.JSMinify" resourceType="Unspecified" preCondition="integratedMode" />
</handlers>
</system.webServer>
We also have this segment, which is at least necessary for running in Cassini
<system.web>
<httpHandlers>
<add verb="*" path="*.js" type="Handlers.Minifiers.JSMinify" validate="false"/>
</httpHandlers>
</system.web>
If this doesn't help, have tou tried using path="/js/*"?
I'm deploying a castle monorail web application to Windows Server 2003.
I've already set the httphandler mapping in web.config as follows :
<httpHandlers>
<add verb="*" path="*.castle" type="Castle.MonoRail.Framework.MonoRailHttpHandlerFactory, Castle.MonoRail.Framework" />
</httpHandlers>
<system.webServer>
<handlers>
<add name="castle page" path="*.castle" verb="*" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" resourceType="Unspecified" preCondition="classicMode,runtimeVersionv2.0,bitness32" />
</handlers>
</system.webServer>
But whenever I tried to access http://localhost/app/Home/Index.castle the web server always returns HTTP 404 Not Found. It looks like the mapping is not handled by ASP.NET engine, like I've been missing a step or two in the configuration. Any solution?
Because you are using IIS 6.0 the <system.webServer> section is ignored and you need to associate the .castle extension with the ASP.NET ISAPI filter in the IIS control panel.
Phil Haack blogged about how to achieve this with ASP.NET MVC and the .mvc extension. For you this would be the .castle extension:
I am trying to implement an IHttpHandler. I have defined an appropriate class but the debug web server (you know, the one you get if you hit f5 in Visual Studio) is responding with "Can't Display Page".
I looked here http://msdn.microsoft.com/en-us/library/ms228090%28v=VS.90%29.aspx to learn how to configure the handler, and it seems there are different ways for IIS6 and 7. But the process is put something in the web.config and then set it up in IIS Manager. However, that is a deployment issue. I want to be able to run it in the test server, and I don't know how to do this second step in the test server.
I put the following in my web.config:
<httpHandlers>
<add verb="*" path="*.sample"
type="MyNamespace.Code.HelloWorldHandler"/>
</httpHandlers>
HelloWorldHandler is the code from the link above (wrapped in MyNamespace.)
Can someone let me know how to configure this correctly for the development server?
You should be able to set the web server settings via web.config like this...
<configuration>
<system.webServer>
<handlers>
<add name="HelloWorldHandler"
verb="*"
path="*.sample"
type="MyNamespace.Code.HelloWorldHandler"
resourceType="Unspecified" />
<handlers>
</system.webServer>
</configuration>