Yo. There's a tendency in placing divs to follow each other vertically, but what i'm trying to accomplish right now is to is basically to place a number of divs (two) inside a parent div like so:
<div id='parent'><div id='onediv'></div> <div id='anotherone'></div> </div>
And i'd like to place 'anotherone' just to the right of 'onediv'. Sadly, float:right is pretty much ruining the layout with the divs popping out of their parent divs and whatnot. Any suggestions are welcome.
Edit: It might be worth noting that the parent div and 'anotherone' has no height elements at all, with 'onediv' planned to be thought as the "height support" div, allowing the contents of 'anotherone' to make the parent div larger at will.
Edit again: Here's the CSS for the specified stuff:
.parent
{
width: 90%;
margin: 0 auto;
border:solid black 1px;
}
.firstchild
{
width: 20%;
margin: 5px;
border: solid black 1px;
height: 180px;
}
.secondchild
{
width: 60%;
border:solid black 1px;
margin: 5px;
}
You can float both inner divs and give the outer div an overflow so that it grows with the inner divs.
Example:
#parent {
overflow: hidden;
}
#parent div {
width: 50%;
float: left;
}
Try this:
<div id="parent">
<div id="onediv" style="float:left;"></div>
<div id="anotherone" style="float:left;"></div>
<div style="clear:both;"></div>
</div>
I think this is what you want (note the re-ordering of DOM elements):
<div id="parent">
<div id="anotherone"></div>
<div id="onediv"></div>
</div>
/*CSS*/
#anotherone{
float:right;
width:50%;
}
#onediv{
float:left;
width:50%;
}
Note, if this is what you want, IE6 will still mess it up. ;-)
You certainly need to specify a width as indicated in #Kevin's answer to get the layout you described, simply specifying float left/right will not have the desired effect. Try specifying the width in pixels rather than a percentage. Failing that or if that's not appropriate for you, I think you possibly need to specify the width of the outer div (through css if you like).
#onediv { float: left; width: 50%; } #anotherone { float: right; width: 50%; }
Just use the <span> tag. Its the equivalent of except it doesn't start a new row.
Related
I was under the impression that when using % or auto for margins on a div contained within another div the position would be calculated in respect to the parent div.
So if I have a div with height: 50%, margin-top: 25% and margin-bottom: 25% the box should centre vertically within the parent div.
When I do this though the div centres on the page not the parent div.
The CSS
div#header {
width: 100%;
height: 100px;
margin: 0px;
position: fixed;
}
div#leftnavigation {
height: 50%;
margin-top: 25%;
margin-bottom: 25%;
float: left;
}
And the HTML
<!--Title and navigation bar-->
<div id='header'>
<!--Left navigation container-->
<div id='leftnavigation'>
<p>efwfwgwegwegweg</p>
</div>
</div>
In my case there are other divs floated to the right of the one detailed above, but any one of them behaves the same way. I'm assuming I'm doing something daft but I've been over all the other questions I could find along these lines and still can't figure it out.
EDIT
Here's the JSFiddle as requested http://jsfiddle.net/ChtVv/
UPDATE
I've tried removing the margin constraints and setting the leftnavigation div to height: 100%, this works so the issue is with the margin attribute?
The reason it didn't work is that percentage-margins are percentages of the parent's width, not its height. You can tell this by using margin-top: 25px; margin-bottom: 25px;, and also by increasing the width of the right-panel in jsFiddle.
In all cases % (percentage) is a valid value, but needs to be used
with care; such values are calculated as a proportion of the parent
element’s width, and careless provision of values might have
unintended consequences.
W3 reference
CSS is tricky!! :D
This is a borrowed technique to centre vertically and horizontally, but it would involve changing your HTML and CSS. I am not sure how flexible you are with your code:
CSS:
#outer {width: 100%; border: 3px solid red;}
#middle {width: 100%; text-align: center;border: 3px solid green;}
#inner {width: 200px; margin-left: auto; margin-right: auto; text-align: left;border: 3px solid blue;}
/* Courtesy: http://www.jakpsatweb.cz/css/css-vertical-center-solution.html */
HTML
<!--Title and navigation bar-->
<div id='outer'>
<!--Left navigation container-->
<div id='middle'>
<p id="inner">efwfwgwegwegweg</p>
</div>
</div>
You can build upon this to achieve whatever you are after!
fiddle: http://jsfiddle.net/pratik136/ChtVv/2/
Ok, so there are a lot of reasons why this would not work.
The main reason would be that your container has position:fixed;
When adding position:fixed; to a element, it no longer reserved it's space in the DOM and won't contain it's children.
I have made a example of the best way (in my Opinion) to center your child both Vertically & Horizontally
Here is a demo.
Demo
And here is the code.
<div id="container">
<div id="child"></div>
</div>
#container{
width:100%;
height:500px;
background:#CCC;
margin:0;
}
#child{
width:50%;
height:50%;
background:#EEE;
position:relative;
top:25%;
left:25%;
}
I've found a lot of variations to this question within SO, but it seems no matter what I try I can't get this (seemingly very simple!) thing working!
What I'm trying to do is to keep the 'centered' div in the center of the viewport and to place the 'sidebar' div directly to its right (i.e. not right-aligned to the viewport) without affecting the centering of the 'centered' div.
Here's some test code on jsfiddle:
http://jsfiddle.net/6wCyr/13/
Everything I've read seems to imply that the float property is exactly what I'm looking for, but the results in the link show that I get weird results wherein the right sidebar is placed below the 'centered' div rather than beside it. That's what's shown in the link.
I've also seen a solution involving using a negative value for the right property, and setting the width of the sidebar exactly, but I couldn't get that one going either.
Hopefully this question is as easy to solve as I think it should be! Just can't seem to find the right set of div inside div and so forth. Hard to debug these alignment issues!
Thanks!
Live Demo
I moved div.sidebar inside div.centered.
I added position: relative to div.centered.
We're using this technique.
You don't have to declare a fixed width on div.sidebar.
CSS:
div.centered {
margin-left: auto;
margin-right: auto;
border: dashed;
width: 100px;
height: 100px;
position: relative
}
div.sidebar {
border: dotted;
position: absolute;
top: 0;
left: 100%
}
HTML:
<div class="holder">
<div class="centered">
CENTERED
<div class="sidebar">
RIGHT SIDEBAR
</div>
</div>
</div>
Try this.
http://jsfiddle.net/DOSBeats/6wCyr/16/
.holder {
margin:0 auto;
width:100px;
}
.centered {
border: dashed;
float:left;
height: 100px;
}
.sidebar {
border: dotted;
float:left;
margin-right:-100px;
width:100px;
}
If you do not set a width to your holder and center it, the sidebar will float to the edge of the window.
Try this:
HTML:
<div id="holder">
<div id="sidebar">Sidebar</div>
<div id="centered">Centered</div>
</div>
CSS:
#holder{
margin:auto;
width:500px;
}
#sidebar{
border:dotted;
float:left;
width:100px;
}
#centered{
border:dashed;
margin-left:110px;
width:380px;
}
I have two divs on a webpage and I would like both of them to have a fixed width and would like the first div to be floated to the left of the second div.
This sounds so simple that I though the following Markup and CSS would give me the desired result:
<div class="left">Content</div>
<div class="right">Content</div>
div.left {
float: left;
width: 200px;
}
div.right {
width: 200px;
This doesn't work as expected, instead the right div appears on the next line as though it wasn't floated. This is best explained in this example webpage:
Example of the Problem
My question is WHY this doesn't work as expected? Not how to fix it.
Notes:
Please make sure you fully understand how floats work before answering this question.
Please make sure you view and understand the examples.
Both elements must be block, not inline.
I understand all fixes/hacks to make this work. I want to know why it doesn't work.
This appears to only work correctly in Opera.
Backing up your answer with documentation is required.
It seems to me that it is the simple rule that blocks, unless floated, always start a new line. w3.org/TR/CSS2/visuren.html#block-formatting section 9.4.1 –
div.left {
float: left;
width: 200px;
height:200px;
background:red;
}
div.right {
float:right;
width: 200px;
height:200px;
background:blue;
}
see http://jsfiddle.net/3kUpF/
Alternatively, if you want them side by side then you can float:left on both
see http://jsfiddle.net/3kUpF/1/
Floating elements can flow "into" block elements, occupying the same line but pushing the contents (not the element itself) over. In this case, left is "inside" right, but there isn't any space left for the text on the right, so it goes underneath. To see what I mean, try setting the width of right to 300px instead of 200px - you should see the blue border "around" left, with the text flowing around it. To "fix" this, I'd suggest giving right a float of left or a display of block-inline.
Float both divs left.
Apply a positive left margin of width(div.right), in your case 200px.
Apply a negative left margin of width(div.left) + width(div.right), in your case, 200px + 200px = 400px.
div.left { float: left; width: 200px; margin-left: 200px; }
div.right { float: left; width: 200px; margin-left: -400px; }
The second element should be inline element.
div.right {
width: 200px;
display: inline;
}
If you do not want to make second element inline, just float it to the left too. But your container will collapse. You can fix it using clear:
<div id="container">
<div class="left">Content</div>
<div class="right">Content</div>
<br style="clear:both"/>
</div>
div.left {
float: left;
width: 200px;
border: 1px solid red;
}
div.right {
width: 200px;
border: 1px solid green;
float:left;
}
#container{
border: 1px solid black;
}
See example
You could add clear:both; your <p> tags. That would solve the problem. Without breaking the rest of the (example) page.
in case you want both containers to float besides each other, you can rather use a span instead of a div. That might bring the problem to an end.
I have a container on my test site:
#container {
margin: 0 auto;
}
Then I added the left vertical menu and on some small screens that menu is not fully visible.
Like my old laptop :-)
I want to keep the margin:auto setting in place but I want to move the whole #container a little bit to the right.
Could it be done some how?
I have tried #container {margin-left:10px;}, but to no avail.
Playing with firebug, it's good to use:
#container {
margin: 0 auto;
position:relative;
left:10px;
}
Hope it solves...
The simplest approach would be to introduce another element (or style another element if it's already available). Thus, you might have:
<div style="margin-left: 10px;">
<div id="container" style="margin: auto;">...</div>
</div>
That way the centering is being done within a container div that's already got the appropriate left-hand padding.
If you wrap your #container div in another div with double the left margin, that will work.
#wrap {
margin-left: 20px;
}
.centre { /* this would be your #container */
width: 100px;
height: 40px;
margin: auto;
background-color: #f00;
}
#wrap .centre {
background-color: #00f;
}
The HTML:
<div class="centre"></div>
<div id="wrap">
<div class="centre"></div>
</div>
http://jsbin.com/emogu3
I have been attempting to split a div into two columns using CSS, but I have not managed to get it working yet. My basic structure is as follows:
<div id="content">
<div id="left">
<div id="object1"></div>
<div id="object2"></div>
</div>
<div id="right">
<div id="object3"></div>
<div id="object4"></div>
</div>
</div>
If I attempt to float the right and left divs to their respective positions (right and left), it seems to ignore the content div's background-color. And other code that I have tried from various websites doesn't seem to be able to translate to my structure.
Thanks for any help!
This works good for me. I have divided the screen into two halfs: 20% and 80%:
<div style="width: 20%; float:left">
#left content in here
</div>
<div style="width: 80%; float:right">
#right content in there
</div>
When you float those two divs, the content div collapses to zero height. Just add
<br style="clear:both;"/>
after the #right div but inside the content div. That will force the content div to surround the two internal, floating divs.
Another way to do this is to add overflow:hidden; to the parent element of the floated elements.
overflow:hidden will make the element grow to fit in floated elements.
This way, it can all be done in css rather than adding another html element.
None of the answers given answer the original question.
The question is how to separate a div into 2 columns using css.
All of the above answers actually embed 2 divs into a single div in order to simulate 2 columns. This is a bad idea because you won't be able to flow content into the 2 columns in any dynamic fashion.
So, instead of the above, use a single div that is defined to contain 2 columns using CSS as follows...
.two-column-div {
column-count: 2;
}
assign the above as a class to a div, and it will actually flow its contents into the 2 columns. You can go further and define gaps between margins as well. Depending on the content of the div, you may need to mess with the word break values so your content doesn't get cut up between the columns.
The most flexible way to do this:
#content::after {
display:block;
content:"";
clear:both;
}
This acts exactly the same as appending the element to #content:
<br style="clear:both;"/>
but without actually adding an element. ::after is called a pseudo element. The only reason this is better than adding overflow:hidden; to #content is that you can have absolute positioned child elements overflow and still be visible. Also it will allow box-shadow's to still be visible.
For whatever reason I've never liked the clearing approaches, I rely on floats and percentage widths for things like this.
Here's something that works in simple cases:
#content {
overflow:auto;
width: 600px;
background: gray;
}
#left, #right {
width: 40%;
margin:5px;
padding: 1em;
background: white;
}
#left { float:left; }
#right { float:right; }
If you put some content in you'll see that it works:
<div id="content">
<div id="left">
<div id="object1">some stuff</div>
<div id="object2">some more stuff</div>
</div>
<div id="right">
<div id="object3">unas cosas</div>
<div id="object4">mas cosas para ti</div>
</div>
</div>
You can see it here: http://cssdesk.com/d64uy
Make children divs inline-block and they will position side by side:
#content {
width: 500px;
height: 500px;
}
#left, #right {
display: inline-block;
width: 45%;
height: 100%;
}
See Demo
You can use flexbox to control the layout of your div element:
* { box-sizing: border-box; }
#content {
background-color: rgba(210, 210, 210, 0.5);
border: 1px solid #000;
padding: 0.5rem;
display: flex;
}
#left,
#right {
background-color: rgba(10, 10, 10, 0.5);
border: 1px solid #fff;
padding: 0.5rem;
flex-grow: 1;
color: #fff;
}
<div id="content">
<div id="left">
<div id="object1">lorem ipsum</div>
<div id="object2">dolor site amet</div>
</div>
<div id="right">
<div id="object3">lorem ipsum</div>
<div id="object4">dolor site amet</div>
</div>
</div>
Best way to divide a div vertically --
#parent {
margin: 0;
width: 100%;
}
.left {
float: left;
width: 60%;
}
.right {
overflow: hidden;
width: 40%;
}
Pure old school CSS
I know this post is old, but if any of you still looking for a simpler solution.
#container .left,
#container .right {
display: inline-block;
}
#container .left {
width: 20%;
float: left;
}
#container .right {
width: 80%;
float: right;
}
If you don't care old browser and need a simple way.
#content {
display: flex;
}
#left,
#right {
flex: 50%;
}
Floats don't affect the flow. What I tend to do is add a
<p class="extro" style="clear: both">possibly some content</p>
at the end of the 'wrapping div' (in this case content). I can justify this on a semantic basis by saying that such a paragraph might be needed. Another approach is to use a clearfix CSS:
#content:after {
content: ".";
display: block;
height: 0;
clear: both;
visibility: hidden;
}
#content {
display: inline-block;
}
/* \*/
* html #content {
height: 1%;
}
#content {
display: block;
}
/* */
The trickery with the comments is for cross-browser compatibility.
This is best answered here Question 211383
These days, any self-respecting person should be using the stated "micro-clearfix" approach of clearing floats.
Make font size equal to zero in parent DIV.
Set width % for each of child DIVs.
#content {
font-size: 0;
}
#content > div {
font-size: 16px;
width: 50%;
}
*In Safari you may need to set 49% to make it works.
Divide a division in two columns is very easy, just specify the width of your column better if you put this (like width:50%) and set the float:left for left column and float:right for right column.