in my application when i type sqlconnection it is not showing any intellisence, i added the namespace System.Data.Sqlclient not only sqlconnection even i am not getting Page calss can u help me.
actually i am sharing this application from my company server.
in our company previously there was .net 2.0 frame work when this project was developed(one year back).
yesterday our company installed 3.0 .net frame work is this any problem for previous project which are developed in 2.0 how can i go through this problem
You should check if your intellisense works at all first. You can try :-
1) Start your visual studio using the following :-
devenv.exe /resetskippkgs
2) Go to Tools > Option > Text Editor > All Languages . Make sure all the checkbox related to "Statement Completion" are "checked" (not just filled).
3) Close Visual Studio, delete the .suo (user option file) which is located at teh same directory as your solution file. Note that that file might be hidden. Open Visual Studio again and check for intellisense.
EDIT :- To see the hidden .suo file (or any other hidden files), follow below steps:-
1.Open My Computer.
2.From the Tools menu, choose Folder Options....
3.Click on the View tab in the Folder Options window.
4.In the Advanced settings: text area, locate the Hidden files and folders category.
Note: The Hidden files and folders category should be viewable at the bottom of the Advanced settings: text area without scrolling down. You'll see two options under the folder.
5.Choose the Show hidden files and folders radio button under the Hidden files and folders category.
6.Click OK at the bottom of the Folder Options window.
Related
I am using Code::Blocks 17.12 on Windows, and would like to create a folder to house the header files.
By default, when I create a console project, a Sources folder is created virtually (there isn't such a folder on disk, but it appears as such in Code::Blocks in the Management window's Project tab.
How do I create additional folders? When I right-click on the project (in the Management window's Project tab), I don't see a way to create a folder.
After Googling around for a bit, I came across this post, although dated 2009:
http://forums.codeblocks.org/index.php?topic=11365.0
Combining that answer with mine, these are the steps for creating a folder in Code::Blocks:
On your disk (i.e. outside of Code::Blocks), create your folders and add any existing files that you need to it. In my case I created an Includes folder and copied existing .h files into it.
Right-click on the project name in the Management windows' Project tab, and choose Project tree. Tick the Display folders as disk option.
Right-click on the project name again, and choose Add files recursively....
A dialog box appears. Navigate to your subfolder and click OK. Another dialog box appears asking you to select the files to add to the project. By default all the files in the subfolder are selected, so click OK.
The folder will appear in Code::Blocks, under a folder called Headers.
You will also need to add the folder(s) that you created outside of Code::Blocks to the compiler's search directories by clicking on Settings -> Compiler.... Then click on the Search directories tab, select the Compiler tab, then click Add.
In the dialog box that appears, click on the folder icon and navigate to your folder. Then click OK.
Whenever I update a small part of my website I have to upload whole website again.
If i upload only edited part it throw me exception.
The way I upload my website:
For example if I have 4 pages (home, register, about me, contact me) and if I update home.aspx, I publish whole website in a local address, and then I compress it with zip format and upload it manually.
Is it possible to publish only updated part?
It is not possible to publish only a part of website, but what you can do is to choose Single-File Assembly build option ,by this you can get single assembly for your page.so intead of updating whole application you can update only the pages you change
read more
What I always do when publish ASP.Net Webform project, I complate it with two steps. Maybe this way suitable for you.
When you use publishing tool on visual studio by selecting Build menu -> Publish, you can choose "File System" as "Publish Method", type your "Target Location", and select "Replace matching files with local copies". It mean the project will publish modified files only.
After publishing have done, Open defined "Target Location" using windows explore and sort by "Modified Date" and just copy newer modified files for each directory recursively to your server.
If you build the website pages into dll. You can not published only the aspx. there are many other dll and compiled files in bin folder, we don't know which matches which aspx.
If you only edited the "view", i mean, the html and markup part of <%%> code, and no code behind (.aspx.cs) change, you can published only this aspx. But remember to set website as updatable in the publish dialog.
I suggest you to compile the aspx into one dll. according to #Buzz 's answer. Then, your aspx files would be only an empty file. All you need to do is upload only one dll to the bin folder.
I've been trying to publish my Visual Studio 2010 project. I do this by accessing a hard drive which corresponds to a URL, so X:\Options\Forms\HD\ corresponds to /HD. Yet when I go to the URL, it says I don't have a default.aspx page. Yet when I look in the corresponding file directory the default.aspx page is right there. Why is the browser ignoring it? Another issue I have is that not all of the files are getting published when I select the option in Visual Studio; many are left behind including my default.aspx.vb file.
To make sure files get published, make sure that they have the correct Build Action set (check the Properties window for the file). Especially, if it is set to None or if the files are not part of the solution/project they won't get published. The "Content" build action is a good choice for any file that just needs to be published.
Extra tip: for files that VS doesn't know the default build action is None. You can however configure VS to use whatever build action you want.
I've written about it here: http://blog.andreloker.de/post/2010/07/02/Visual-Studio-default-build-action-for-non-default-file-types.aspx
Also, I've created a simple tool that generates the necessary configuration file: http://tools.andreloker.de/dbag
I have Aptana Studio 3, build: 3.0.9.201202141038
I'm using it to edit some Netsuite client scripts (javascript). The netsuite plugin lets me upload scripts to netsuite, which is great, but I have to right click on the filename in the project explorer, pick "Netsuite" and then "Upload"... too many clicks.
What I want is one button to stick on the toolbar that will do the upload. Is this customization possible? Not that I'm lazy but when debugging it becomes a pain to do so much right-clicking.
In Eclipse/Aptana, the "Project Explorer" can do this. If you select a project and/or file within that project, the "Upload" buttons are made available IF you have set up a remote connection to that project.
I am not certain if your uploads/pushes to Netsuite are via FTP but, if they are, just add your remote connection to the project. To do this, expand your project folder the project in the Project Explorer view and then right-click on the Connections icon to add a new (FTP) connection.Once this is setup, any file selected in the Project Explorer can be uploaded with a simply button click from this view.
Not sure if that is exactly what you want but, in the meantime, might get you closer to it!
Hit ctrl+shift+; and the file will save and upload.
I created a C# web project with MSVS 9 and thats all i know about my configurations.
In my browser i can access any aspx files i have in my project. However when i use http://localhost:3288/img/test.png i see nothing. The working directory is ./root, the png file is in ./root/img/test.png How do i have ASP.NET display my images and everything else in the folder? (and subfolders).
Is the .png included in the solution?
When you hit the "play" button your essentially starting up a new website ( localhost:2383 ) so if its not in the solution it won't be copied over to the new, temporary, website that the debugger attaches too.
If this is the problem a quick fix is to hit the "Show all Files" button on the top of your solution explorer, this will show all the files in that folder on your hard drive. Then right click on the .png you want to include and hit "Include in Project".
Based on your comment your only solution is to actually create an IIS site for your solution with the root dir the same as your web project. Then in the project properties you'll have to tell the debugger to attach to your local IIS instead of visual studios. Not sure the exact click path, right click on your project and go to properties, look for debugging options.
Give a look to the ASP Image control , you can specify paths starting in your app root (~):
<asp:Image id="Image1" runat="server"
ImageUrl="~/Images/image1.png"/>
Or you can use relative paths to the page that are displayed.
Check this article about ASP .NET Website Paths.