IIS 7.5 , 2008rc2, classic asp, 500 error msg:
The page cannot be displayed because an internal server error has occurred.
I need to know how to configure IIS to get a more detailed error.
I've tried setting to true all of debugging options in the ASP configuration.
But that didn't work. Can anyone help me?
I have come to the same problem and fixed the same way as Alex K.
So if "Send Errors To Browser" is not working set also this:
Error Pages -> 500 -> Edit Feature Settings -> "Detailed Errors"
Also note that if the content of the error page sent back is quite short and you're using IE, IE will happily ignore the useful content sent back by the server and show you its own generic error page instead. You can turn this off in IE's options, or use a different browser.
If you're on a remote server you can configure your web.config file like so:
<configuration>
<system.webServer>
<httpErrors errorMode="Detailed" />
<asp scriptErrorSentToBrowser="true"/>
</system.webServer>
<system.web>
<customErrors mode="Off"/>
<compilation debug="true"/>
</system.web>
Double click "ASP" in the site's Home screen in IIS admin, expand "Debugging Properties", enable "Send errors to browser", and click "Apply".
Under "Error Pages" on the home screen select "500", then "Edit feature settings" and select "Detailed Errors".
Note that the same steps apply for IIS 8.0 (Windows Server 2012).
After trying Vaclav's and Alex's answer, I still had to disable "Show friendly HTTP error messages" in IE
TLDR:First determine where in the pipeline you're getting the error from (scroll looking for screenshots of something that resembles your error), make changes to get something new, repeat.
First determine what error message you are actually seeing.
If you are seeing the file located here...
%SystemDrive%\inetpub\custerr<LANGUAGE-TAG>\500.htm
...which generally looks like this:
**...then you know you are seeing the currently configured error page in IIS ** and you do NOT need to change the ASP.net customErrors setting, asp error detail setting, or "show friendly http errors" browser setting.
You may want to look at the above referenced path instead of trusting my screenshot just in case somebody changed it.
"Yes, I see the above described error..."
In this case, you are seeing the setting of <httpErrors> or in IIS Manager it's Error Pages --> Edit Feature Settings. The default for this is errorMode=DetailedLocalOnly at the server node level (as opposed to the site level) which means that while you will see this configured error page while remote, you should be able to log on locally to the server and see the full error which should look something like this:
You should have everything that you need at that point to fix the current error.
"But I don't see the detailed error even browsing on the server"
That leaves a couple of possibilities.
The browser you are using on the server is configured to use a proxy
in its connection settings so it is not being seen as "local".
You're not actually browsing to the site you think you are browsing to - this commonly happens when there's a load balancer involved. Do a ping check to see if dns gives you an IP on the server or somewhere else.
Your site's httpErrors settings is set for "Custom" only. Change it to "DetailedLocalOnly". However, if you have a configuration error, this may not work since the site level httpErrors is also a configuration item. In that case proceed to #4
The default for httpErrors for all sites is set for "Custom". In this case you need to click on the top level server node in IIS Manager (and not a particular site) and change the httpErrors settings there to DetailedLocalOnly. If this is an internal server and you're not worried about divulging sensitive information, you could also set it to "Detailed" which will allow you to see the error from clients other than the server.
You're missing a module on the server like UrlRewrite (this one bites me a lot, and it often gives the generic message regardless of the httpErrors settings).
"Logging on to the server is not an option for me"
Change your site's httpErrors to "Detailed" so you can see it remotely. But if it doesn't work your error might already be a config error, see #3 immediately above. So you might be stuck with #4 or #5 and you're going to need somebody from your server team.
"I'm not seeing the error page described above. I'm seeing something different"
If you see this...
...and you expect to see something like this...
...then you need to change "Send errors to browser" to true in IIS Manager, under Site --> IIS --> ASP --> Debugging Properties
If you see this...
or this...
...you need to disable friendly errors in your browser or use fiddler's webview to look at the actual response vs what your browser chooses to show you.
If you see this...
...then custom errors is working but you don't have a custom error page (of course at this point were talking about .net and not classic asp). You need to change your customErrors tag in your web.config to RemoteOnly to view on the server, or Off to view remotely.
If you see something that is styled like your site, then custom errors is likely On or RemoteOnly and it's displaying the custom page (Views->Shared->Error.cshtml in MVC for example). That said, it is unlikely but possible that somebody changed the pages in IIS for httpErrors so see the first section on that.
In web.config under
<system.webServer>
replace (or add) the line
<httpErrors errorMode="Detailed"></httpErrors>
with
<httpErrors existingResponse="PassThrough" errorMode="Detailed"></httpErrors>
This is because by default IIS7 intercepts HTTP status codes such as 4xx and 5xx generated by applications further up the pipeline.
Next, enable "Send Errors to Browser" under the "ASP" section, and under "Error Pages / Edit Feature Settings", select "Detailed errors".
Also, give Write permissions on the website folder to the IIS_IUSRS builtin group.
try setting the value of the "existingResponse" httpErrors attribute to "PassThrough". Mine was set at "Replace" which was causing the YSOD not to display.
<httpErrors errorMode="Detailed" existingResponse="PassThrough">
One thing nobody's mentioned is as a very quick and temporary fix, you can view the error on the localhost of that web server.
You may also verify that if you changed your main website folder (c:\inetpub\wwwroot) to another folder you must give read permission to the IIS_IUSRS group in the new folder.
Fot people who have tried EVERYTHING and just CANNOT get the error details to show, like me, it's a good idea to check the different levels of configuration. I have a config file on Website level and on Application level (inside the website) check both. Also, as it turned out, I had Detailed Errors disabled on the highest node in IIS (just underneath Start Page, it has the name that is the same as the webservers computername). Check the Error Pages there.
Found it.
http://blogs.iis.net/ksingla/archive/2009/02/16/iis-7-5-updates-to-custom-errors-and-compression.aspx
run cmd as administrator, go to your system32\inetsrv folder and execute:
appcmd.exe set config -section:system.webServer/httpErrors -allowAbsolutePathsWhenDelegated:true
Now I can see detailed asp errors .
If you run the browser in the server and test your url of the project with the local ip you have received all errors of that project without a generally error page(for example 500 error page).
In my case it was permission issue.
Open application folder properties -> Security tab -> Edit -> Add
IIS AppPool\[DefaultAppPool or any other apppool] (if use ApplicationPoolIdentity option)
IUSRS
IIS_IUSRS
Double check the encoding of the asp file you are testing.
For instance if you created a file like below on a Windows Server Core 2019 :
echo "<%# LANGUAGE=Javascript %>" > test.asp
echo "<%Response.Write("test");%>" >> test.asp
Then test.asp will be encoded in Unicode, and requesting it will produce a 500 without any details.
Do a notepad test.asp, then click on "Save As..." and choose "ANSI" encoding to fix it.
Related
Got following Error:
HTTP Error 403.14 - Forbidden
The Web server is configured to not list the contents of this directory.
this is how I linked css file.
<link rel="stylesheet" type="text/css" href="~/styles/StyleSheet.css" />
i am using master page for first time. i did added master page in iss server.
i enabled the directory setting in my iss 8.0
Have you tried setting the following within your web.config file :
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
The Web server is configured to not list the contents of this directory
The keyword in the error is list.
That sounds more like you do not have a default document set up. If you don't have one, nor don't request a specific document (e.g. http://www.foobar.com/ or http://www.foobar.com/foo.html respectively) IIS will not "know" what to "serve" to the browser nor will it, nor should you expect it to, list the contents of that directory (instead).
See: Microsoft Support: Error 403.14
A Short Story Of A Lost Controller, And A Happy Ending
Let's say you have a controller called Data, in the project file /Controllers/DataController.cs. You can access it just fine via http://yoursite.com/data, which is handled by the DataController.Index action method.
Then, somehow, it breaks, and you start getting "The Web server is configured to not list the contents of this directory" when you visit this URL. Strangely, visiting /data/index still works! You try all the suggestions found online to make this work but can't seem to do it. What could it be?
Perhaps you ought to think about what the error means. It says that when you visit /data, it finds a directory there, but you aren't allowed to see the files in it. Setting aside the fact that your routing doesn't seem to work and it should, could there actually be a directory there?
Yes, there could! In your web project, you cleverly added folder /Data! This is a physical folder that takes precedence in the server's static routing rules (since you didn't rewrite those so physical files would be looked at after managed virtual paths).
The solution is thus to rename the folder, or rename the controller, one or the other. This will fix your problem quite speedily and you may then proceed on your merry way coding long into the night to the enveloping strains of techno Spanish mandolin trance music, with your trusty cat snoozing on your foot and the cold beverage of your choice beading up on the desk next to you!
The Ramesh Rajendran's answer must working, but you can use look at what is the modules your web application use and add in system.webServer tag on webconfig file to they use it. I had this error also in a test web application when I put it on Server IIS.
It's very strange not list the contents with the option enabled on IIS Web Server.
When you press Ctrl+F5, then IIS don't understand what to serve as you don't have any Default aspx file in your site , i recommend you to add a aspx file by going to Add>NewItem>Webform>
Note: remember to check the box at bottom right , "select from master page"
after selecting , save all the pages and just open your default.aspx file and you will surely see the reflected design as you did in master page.
Master pages are not aspx file but serve as a template for other webpages , so you cant just open master page.
Don't start the debugger while you are on the master page. EdSF pretty much summed up why.
In addition, you also may need to set a default start page(right click, set as start page).
You should define a default document value in web config and disable directory browsing.
<system.webServer>
<defaultDocument>
<files>
<add value="insertion.aspx" />
</files>
</defaultDocument>
<directoryBrowse enabled="false" />
Im using N2Cms and am looking in to some issues i have with it. It has a navigation panel on the left hand side that loads via ajax as you expand the tree.
The code that gets the childeren of the node calls an ashx file with some parameters. One parameter is for a path and contains slashes in it. For this reason it has been encoded.
.../cms/Content/Navigation/LoadTree.ashx?target=preview&selected=%252fhome%252fhelp-and-advice%252f
I have had no issues with this on my development server (running iis 7.5) but when deployed to our test server (iis7) the navigation fails to work.
Investigating this has shown that the above url gives a 500 error.
If i decode the url to
.../cms/Content/Navigation/LoadTree.ashx?target=preview&selected=/home/help-and-advice/
it works with no problems.
Unfortunately i cannot change the code that generates this as its a part of the n2cms source code and i am assuming it has been encoded for a good reason.
Does anyone know anything i can do either in my web.config to allow encoded parameters or something i can change on the iis server?
EDIT:
So this link seems to suggest that its doing this on purpose as a security mesure.
http://msdn.microsoft.com/en-us/library/ee656542.aspx
The suggested solution is to upgrade to .net 4.0 and add the following to the web.config
<configuration>
<uri>
<schemeSettings>
<add name="http" genericUriParserOptions="DontUnescapePathDotsAndSlashes"/>
</schemeSettings>
</uri>
</configuration>
Unfortunately this seems to have no effect.
Any Ideas why this doesnt work?
This could be the URLScan utility. URL Scan blocks URL's based on the rules in it's config file. It also has it's own log file, so you can tell for sure by looking at the URLScan log.
Do a google search for URLSCan default location.
It seems your url goes through 2 html encode.
Is there some url rewriting module active on your IIS7 server ?
OK, im getting somewhere with this.
When trying to find the error in the IIS logs and failing, then looking through many posts about failed tracing request and still not getting any errors in iis, i figured that the request was just not getting to IIS.
Looking back at the server error, there was a clue there too.
500 Internal Server Error. The request was rejected by the HTTP filter.
It is the firewall!!
We have disabled the HTTP Filter and now it works :)
I now need to investigate what this HTTP Filter was supposed to be protecting us against and are we secure now we have switched it off.
I tried to run my WebApp on my local machine today (nothing has changed on it) and I had the above error. I know my machine had a windows update recently (not sure if that has anything to do with it).
The error produces a big print out of css styles and html markup.
In the markup it also says "The requested page cannot be accecssed because the related configuration data for the page is invalid".
Maybe you accidentally changed the web.config and now contains a malformed section. I'd recommend you take a close look to your configuration file.
I'd say that the error page should tell you the necessary information to solve the problem but I assume that if you're asking if because it's not the case :)
I changed the user info. (windows password which was changed) in the IIS & that helped me :)
You may need to enable windows (or some other type of) authentication in IIS for the site specifically.
We run a link redirection service which can handle links thrown at it in various formats. One of these formats is to append the destination URL to the end of the link, for example
http://url.fwd/abcd/http://www.mydomain.com/page.aspx
This was working on a Windows Server 2003 / IIS6 box for the last two years, but now we're trying to move to a Windows Server 2008 / IIS7 setup and its not working anymore.
I've read about the problem with colons in the URL but it doesn't affect pages not ending in '.aspx'. For instance,
http://url.fwd/abcd/http://www.mydomain.com/page.php
would redirect fine.
http://url.fwd/abcd/http//www.mydomain.com/page.aspx
also works fine (note the lack of a second colon). Despite being the wrong URL, it does get handled by our URL forwarding system, which uses a custom 404 page. On the old system, we had a similar problem, so a method was written in Global.asax > Application_Error specifically to handle the '.aspx' case, and it worked fine.
On our new server, the Application_Error never gets thrown in Global.asax. Instead, I get a System.NotSupportedException - "The given path's format is not supported". This System.NotSupportedException is the exact case we handle in the Global.asax page, so it's definitely not being fired.
I've changed the registry keys indicated in several forum posts,
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ASP.NET VerificationCompatibility=1
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HTTP|Parameters AllowRestrictedChars=1
I've tried changing the Handler Mappings settings for .aspx.
I've tried setting the App pool to use classic mode instead of integrated, but this causes a completely different error where static content such as images and CSS do not display at all. I've checked that static content is enabled in the windows features, and it is.
Under classic mode, the '.aspx' request throws two Bad Request errors with absolutely no information whatsoever. The code of the error page I get is literally
Bad Request<html><body>Bad Request</body></html>
UPDATE: I've changed the static file Handler Mapping to the form found in this page
http://improve.dk/blog/2006/12/11/making-url-rewriting-on-iis7-work-like-iis6
However, as the author rightly points out, this is a hack and not the correct way of doing things under IIS7. It also only fixes the static file problem in classic mode. '.aspx' pages still throw an error under classic mode.
Any thoughts or input would be greatly appreciated at this point.
IIS 7 Solution
The easy solution in IIS 7 is to add a setting in your web.config file to tell IIS to process all requests through your Global.asax events. Just add or change this section in your web.config to enable requests:
<system.webServer>
<modules runAllManagedModulesForAllRequests="true" />
</system.webServer>
In my case, I was publish my site in production and I miss copy to server App_global.asax.compiled file. For this reason was not fire the Events inside Global.asax.
Hope anyelse help this tips, I lost 8 hours seeking.
So I have been developing a small ASP.NET web app in C# for my company over the past few weeks and now I am trying to push it onto our Rackspace server. First step was to create a virtual directory because we want it to be www.ourdomain.com/appname/ and most of the stuff on ourdomain.com is currently in classic ASP. So I did this and then uploaded my stuff to the new folder. I *think* I did this at least semi-right because the error message I am getting is that nice puke color (ASP.NET style instead of classic ASP style) -- problem is it is generic and just saying runtime error. I tried just copy/pasting <customErrors mode="On" /> into the web.config file in the /appname/ directory but nothing changed
So the actual questions are:
How can I get a more descriptive error, when I was developing locally I just pushed the "play button" in VS2010 and it would either show me the app or tell me where I screwed up
Is there anything else I'm doing wrong that may be causing this? If there's things I need to check lemme know!
> I tried just copy/pasting
> <customErrors mode="On" /> into the
> web.config file in the /appname/
> directory but nothing changed
You need <customErrors mode="Off" />
If you can go with remote desktop in your server you can load your page under rd and you'll have your error message.
You can also see it in the event viewer.
Or you can catch the exception in your global.asax :
http://www.nikhedonia.com/notebook/entry/three-ways-to-catch-exceptions-in-asp-net/
see under "Catching Exceptions at the Application Level"
where you can send the exception details to your mailbox or in a file for instance.
I think you want to turn off customErrors. You might also want to log all errors by capturing the event in the Application_Error event on the global.asax page.
Listen to exactly what that message is telling you to get a more descriptive error message. By default, the error messages are only detailed when accessing the site from the server computer (in your dev environment, that would be YOUR computer, but not once you deploy to your server). Once you set the settings just how that screen tells you, you should see the full error message.