I'm not sure if this is possible but is there a way to select A unless its null then select B instead?
I am writing a trigger, my code is
insert into tbl_a(userid, obj)
select p.author, new.id
FROM user_comment AS p
WHERE p.id=new.parent
however new.parent is a nullable long (i'll switch to foreign key once supported in system.data.sqlite)
if its null i get 0 results and no insert. I would like to use join media as m on m.id=new.media_id and return m.user_id if new.parent is null. So how do i write the select to return m.author if parent isnt null (which i'll return p.author like the above)
You can use IFNULL(col1, col2). If col1 is not null, it is returned. If col1 is null, col2 is returned.
Related
I need to merge some randomly uppercased data that has been collected in an SQLite table key_val, such that key is always lowercase and no vals are lost. There is a unique compound index on key,val.
The initial data looks like this:
key|val
abc|1
abc|5
aBc|1
aBc|5
aBc|3
aBc|2
AbC|1
abC|3
The result after the merge would be
key|val
abc|1
abc|2
abc|3
abc|5
In my programmer brain, I would
for each `key` with upper case letters;
if a lower cased `key` is found with the same value
then delete `key`
else update `key` to lower case
Re implementing the loop has a sub query for each row found with upper case letters, to check if the val already exists as a lower case key
If it does, I can delete the cased key.
From there I can UPDATE key = lower(key) as the "duplicates" have been removed.
The first cut of the programming method of finding the dupes is:
SELECT * FROM key_val as parent
WHERE parent.key != lower(parent.key)
AND 0 < (
SELECT count(s.val) FROM key_val as s
WHERE s.key = lower(parent.key) AND s.val = parent.val
)
ORDER BY parent.key DESC;
I'm assuming there's a better way to do this in SQLite? The ON CONFLICT functionality seems to me like it should be able to handle the dupe deletion on UPDATE but I'm not seeing it.
First delete all the duplicates:
DELETE FROM key_val AS k1
WHERE EXISTS (
SELECT 1
FROM key_val AS k2
WHERE LOWER(k2.key) = LOWER(k1.key) AND k2.val = k1.val AND k2.rowid < k1.rowid
);
by keeping only 1 combination of key and val with the min rowid.
It is not important if you kept the key with all lower chars or not, because the 2nd step is to update the table:
UPDATE key_val
SET key = LOWER(key);
See the demo.
Honestly it might just be easier to create a new table and then insert into it. As it seems you really just want a distinct select here, use:
INSERT INTO kev_val_new ("key", val)
SELECT DISTINCT LOWER("key"), val
FROM key_val;
Once you have populated the new table, you may drop the old one, and then rename the new one to the previous name:
DROP TABLE key_val;
ALTER TABLE key_val_new RENAME TO key_val;
I agree with #Tim that it would be easire to re-create table using simple select distict lower().. statement, but that's not always easy if table has dependant objects (indexes, triggers, views). In this case this can be done as sequence of two steps:
insert lowered keys which are not still there:
insert into t
select distinct lower(tr.key) as key, tr.val
from t as tr
left join t as ts on ts.key = lower(tr.key) and ts.val = tr.val
where ts.key is null;
now when we have all lowered keys - remove other keys:
delete from t where key <> lower(key);
See fiddle: http://sqlfiddle.com/#!5/84db50/11
However this method assumes that key is always populated (otherwise it would be a strange key)
If vals can be null then "ts.val = tr.val" should be replaced with more complex stuff like ifnull(ts.val, -1) = ifnull(tr.val, -1) where -1 is some unused value (can be different). If we can't assume any unused value like -1 then it should be more complex check for null / not null cases.
I’m attempting to count records that match specific criteria, including one field being null, but including the null clause results in no records being found.
If I output the contents of the field, it comes back as “(null)”. I’ve tried IS NULL and ISNULL, both of which appear that they should work when looking at other sources, but they both fail for me.
SELECT calls.contact_number, calls.contact_name, COUNT(notes.id) AS note_count
FROM calls LEFT JOIN notes on calls.id = notes.call_id
WHERE calls.contact_number = "123" AND notes.group_id ISNULL
GROUP BY calls.contact_number
This returns no records, whereas I’m expecting it to return one.
Move the condition in the ON clause:
SELECT calls.contact_number, calls.contact_name, COUNT(notes.id) AS note_count
FROM calls LEFT JOIN notes
ON calls.id = notes.call_id AND notes.group_id IS NULL
WHERE calls.contact_number = "123"
GROUP BY calls.contact_number, calls.contact_name
After grabbing a copy of the database, the notes.group_id field was determined to be an integer type, and the record in question actually contained a 0.
The successful query ended up being
SELECT calls.contact_number, calls.contact_name, COUNT(notes.id) as note_count
FROM calls LEFT JOIN notes
ON calls.id = notes.call_id
WHERE calls.contact_number = “123” AND (notes.group_id IS NULL OR notes.group_id = 0)
GROUP BY calls.contact_number
Not sure why the NSLog output of the returned value for group_id was ‘(null)’, some weird conversion?
I have set my column to int not null default 1... but whenever I save my record, it sets default value for that record to be 0.
I am not setting it anywhere. I don't know where I am making a mistake.
I have debugged my code , and when I am passing new entity object it is setting default value for not null to 0 .May be it is something with LINQ, But I don't know how to handle it.I don't want to explicitly assign value.
Thanks!
For sql-server, you can use SQL Server Profiler to catch all the scripts you run into the DB.
This may show you some details
Try running this query, replacing the 'myTable' and 'myColumn' values with your actual TABLE and COLUMN names, and see what's returned:
SELECT
OBJECT_NAME(C.object_id) AS [Table Name]
,C.Name AS [Column Name]
,DC.Name AS [Constraint Name]
,DC.Type_Desc AS [Constraint Type]
,DC.Definition AS [Default Value]
FROM sys.default_constraints DC
INNER JOIN sys.Columns C
ON DC.parent_column_id = C.column_id
AND DC.parent_object_id = C.object_id
WHERE OBJECT_NAME(DC.parent_object_id) = 'myTable'
AND COL_NAME(DC.parent_object_id,DC.parent_column_id) = 'myColumn'
;
Should return something like this:
[Table Name] [Column Name] [Constraint Name] [Constraint Type] [Default Value]
-------------------------------------------------------------------------------------------
myTable myColumn DF_myTable_myColumn DEFAULT_CONSTRAINT ('0')
If the [Default Value] returned is indeed (1), then it means that you have set the constraint properly and something else is at play here. It might be a trigger, or some other automated DML that you've forgotten/didn't know about, or something else entirely.
I am not the world's biggest fan of using a TRIGGER, but in a case like this, it could be handy. I find that one of the best uses for a TRIGGER is debugging little stuff like this - because it lets you see what values are being passed into a table without having to scroll through mountains of profiler data. You could try something like this (again, switching out the myTable and myColumn values with your actual table and column names):
CREATE TABLE Default_Check
(
Action_Time DATETIME NOT NULL DEFAULT GETDATE()
,Inserted_Value INT
);
CREATE TRIGGER Checking_Default ON myTable
AFTER INSERT, UPDATE
AS
BEGIN
INSERT INTO Default_Check (Inserted_Value)
SELECT I.myColumn
FROM Inserted I
;
END
;
This trigger would simply list the date/time of an update/insert done against your table, as well as the inserted value. After creating this, you could run a single INSERT statement, then check:
SELECT * FROM Default_Check;
If you see one row, only one action (insert/update) was done against the table. If you see two, something you don't expect is happening - you can check to see what. You will also see here when the 0 was inserted/updated.
When you're done, just make sure you DROP the trigger:
DROP TRIGGER Checking_Default;
You'll want to DROP the table, too, once it's become irrelevant:
DROP TABLE Default_Check;
If all of this still didn't help you, let me know.
In VB use
Property VariableName As Integer? = Nothing
And
In C# use
int? value = 0;
if (value == 0)
{
value = null;
}
Please check My Example:
create table emp ( ids int null, [DOJ] datetime NOT null)
ALTER TABLE [dbo].[Emp] ADD CONSTRAINT DF_Emp_DOJ DEFAULT (GETDATE()) FOR [DOJ]
1--Not working for Default Values
insert into emp
select '1',''
2 ---working for Default Values
insert into emp(ids) Values(13)
select * From emp
I have to use from sqlite DB and I insert many data in my sqlite file. now I want execute records that has "NULL". in oder word I want to see records that are "NULL".
when I execute this code I nothing get.
select * from table1 where ParentID = NULL
//or this select * from table1 where ParentID = 'NULL'
this is my sqlite file :
I want execute folder1 with checking ParentID (I need only check ParentID column)
NULL is never equal to anything, including NULL. You need to use IS instead.
SELECT * FROM table1 WHERE ParentID IS NULL
You have to use the following:
select * from table1 where ParentID is NULL
NULL values represent missing unknown data.By default, a table column can hold NULL values.NULL values are treated differently from other values.
SELECT * FROM table1 WHERE ParentID IS NULL
Always use IS NULL to look for NULL values.
You should use IS NULL. (The comparison operators = and <> both give UNKNOWN with NULL on either side of the expression.)
SELECT * FROM table1 WHERE ParentID IS NULL;
I have a table named CUSTOMER, with few columns. One of them is Customer_ID.
Initially Customer_ID column WILL NOT accept NULL values.
I've made some changes from code level, so that Customer_ID column will accept NULL values by default.
Now my requirement is that, I need to again make this column to accept NULL values.
For this I've added executing the below query:
ALTER TABLE Customer MODIFY Customer_ID nvarchar2(20) NULL
I'm getting the following error:
ORA-01451 error, the column already allows null entries so
therefore cannot be modified
This is because already I've made the Customer_ID column to accept NULL values.
Is there a way to check if the column will accept NULL values before executing the above query...??
You can use the column NULLABLE in USER_TAB_COLUMNS. This tells you whether the column allows nulls using a binary Y/N flag.
If you wanted to put this in a script you could do something like:
declare
l_null user_tab_columns.nullable%type;
begin
select nullable into l_null
from user_tab_columns
where table_name = 'CUSTOMER'
and column_name = 'CUSTOMER_ID';
if l_null = 'N' then
execute immediate 'ALTER TABLE Customer
MODIFY (Customer_ID nvarchar2(20) NULL)';
end if;
end;
It's best not to use dynamic SQL in order to alter tables. Do it manually and be sure to double check everything first.
Or you can just ignore the error:
declare
already_null exception;
pragma exception_init (already_null , -01451);
begin
execute immediate 'alter table <TABLE> modify(<COLUMN> null)';
exception when already_null then null;
end;
/
You might encounter this error when you have previously provided a DEFAULT ON NULL value for the NOT NULL column.
If this is the case, to make the column nullable, you must also reset its default value to NULL when you modify its nullability constraint.
eg:
DEFINE table_name = your_table_name_here
DEFINE column_name = your_column_name_here;
ALTER TABLE &table_name
MODIFY (
&column_name
DEFAULT NULL
NULL
);
I did something like this, it worked fine.
Try to execute query, if any error occurs, catch SQLException.
try {
stmt.execute("ALTER TABLE Customer MODIFY Customer_ID nvarchar2(20) NULL");
} catch (SQLException sqe) {
Logger("Column to be modified to NULL is already NULL : " + sqe);
}
Is this correct way of doing?
To modify the constraints of an existing table
for example... add not null constraint to a column.
Then follow the given steps:
1) Select the table in which you want to modify changes.
2) Click on Actions.. ---> select column ----> add.
3) Now give the column name, datatype, size, etc. and click ok.
4) You will see that the column is added to the table.
5) Now click on Edit button lying on the left side of Actions button.
6) Then you will get various table modifying options.
7) Select the column from the list.
8) Select the particular column in which you want to give not null.
9) Select Cannot be null from column properties.
10) That's it.