I have a asp.net page with some user controls in it. One of the controls is a search form that has its results populated into a gridview.
The gridview needs to have some extra columns that contain 3 LinkButtons that perform a url calculation and redirect to another page.
The reason that I chose LinkButton over HyperLink is that I wouldn't need to perform all url calculations before the user actually needs, since I have way too many search results and the calculation is a bit expensive.
So, my LinkButtons look nice except when I am using IE6. In this case I get a Javascript error: "Expected ')'" or "Expected ':'".
Has anyone seen this?
I've finally realized that my problem was some jQuery code that interfered with the links, thus producing an error.
Related
I have a webpage with a textbox and a button and when the button is clicked i get som calculations on the value entered, but i cannot enter another value and see calulations on that new number.
How can I achieve this? Thanks in advance.
From your question it sounds like you want to be able to change the values without having to click the button again, and have the calculations redone. The reason clicking your button works is because the page goes through a Postback The calculations are then processed server side and returned after the page has loaded. What you want to do can be accomplished in a handful of ways including: jQuery or ajax. One thing you may want to look at is jQuery .post This can help you post the values of your form to a processing page and then set the return value on your form. On the other hand since you're using .NET you could also take a look at the Microsoft AJAX Control Toolkit One place you could start is by looking at the Update Panel. Good luck and I hope this helps!
Please excuse me for a probably low quality of this question, since I'm not a web dev, so I possibly don't now some obvious things and don't know what to Google for. I think problem must have some simple solution, but I'm struggling with it for two days now, so I feel myself pretty stupid :-).
I have a custom control which is a set of checkboxes which are added dynamically based on a property which is set in OnLoad event of a page. I have two such controls on a page and second control items should be based on items selected in first control.
The problem is, I can't figure out, how to catch on autopostback which boxes were selected in first control before second contol is constructed to pass this data to it?
Take a look at this.
http://forums.asp.net/t/1440174.aspx
Since your building them dynamically, they are not as easy to find as webforms would like to be, if you added them to the page and wired up events and such.
Your going to look at the Request.Forms list, and search thru it for any controls you want.
I believe checkboxes are like radio buttons, they only return if they are checked, which is good, cause you want to know which ones were checked.
I've used same solution as in the accepted answer for this question: Dynamically Change User Control in ASP.Net , just need to assign an unique id for each dynamically created CheckBox in custom control. Not as clean solution as I want but at least it works.
You can save the data in the ViewState, QueryString or as Session before moving to the next page and you can do modifications based on it.
I'm really new to asp.net and have a couple of issues I'm trying to get fixed. I have some programming experience, but it is not asp.net. However, I've been able to follow the code enough to make other changes in the code to fix other issues.
The first is this:
I'm working with a form that has a calculate amount method that gets called when the user inputs a value in an amount text box. The same method gets called when the next control, number of payments, has a value.
So in the two controls:
onTextChanged="ctrlName_textChanged"
Then in the code behind, the textchanged method does:
calculateAmount();
The problem is after the amount is calculated and returns, the focus seems to get reset and the user has to tab all the way back through the form to the place they were.
The textboxes in question are in a panel that starts out hidden and is made visible conditionally.
My apologies if I have not used the proper .net terminology.
It looks like the same issue may be causing my second problem. When the user types in an amount and then tabs and quickly adds the number of payments, you can see the amount get calculated correctly and very shortly displays the proper total in the total amount text box. However, even though it shows for that short time, the tab order again gets reset as well as the total amount value.
I've looked at different methods to try and fix the focus issue.
In the textchanged method, I tried using something like:
Session["myval"] = "someval";
Then tried to check against that in Page_Load with something like:
if(Session["myval"] != null) {
this.NextControl_Name.Focus();
}
but it didn't ever work correctly.
I also tried to set a cookie in that same textchanged method using something like this:
Response.Cookies["myval"].Value = "somevalue";
Then tried to check that in Page_Load using something like the previous if block above but using Request.Cookies["myval"] as the source.
Is there a good reference with some really clear code samples I can look at for this type of implementation?
Thank you in advance,
C.
Sounds like you have a postback problem...
Remember that the web is stateless. This means that when you have a web page rendered out in .NET and you attach an event that executes serverside code... it does an HTTP POST back to the server which is effectively a new page request. The Page_Load method will fire again as well as your bound event. So your onTextChanged event is firing a new request back to the server. This is why you see the focus reset and why when you tab quickly, the value seems to disappear magically.
You can do one of several things, you can implement the UpdatePanel in the AjaxControlToolkit
http://www.asp.net/ajax/ajaxcontroltoolkit/samples/
you can use PageMethods and do your validation with javascript and jQuery (or other js library)
see page method info http://www.geekzilla.co.uk/View30F417D1-8E5B-4C03-99EB-379F167F26B6.htm
Hope this helps
I'm struggling with an issue I just can find a solution for.
First of all, I can't use asp.net AJAX or anything else thant standard asp.net 2.0 as the server admin won't install anything else.
So here is, what I try to do. (For the curious, skip to the bold question below)
My page consists of several parts, each of which gets loaded by jquery.load(url). One of these page parts gets filled with an aspx that contains a form view. As I don't want to have postbacks, I switch to the EditTemplate of the form view by a simple click on a regular html button that submits a parameter indicating the aspx page to switch to edit mode, e.g.
Page_Load(...)
{
if(Request.Params["SwitchEditMode"]) SwitchEditMode();
}
This works perfectly! Now here the part where I'm stuck. The elements in the EditTemplate are based on a select from a database view and bound to the fields by <%# Bind("xx"). Then I have a html button (no asp control) that submits a parameter to the aspx page that tells it to invoke the DataSource update method. In the dataSource_updating method I look for the controls that contain the values I want to save. But these values are always the same, as when I switch to the edit view. No changes I make in the textboxes or dropdowns are preserved.
A long story short, the question how to save the values from EditTemplate back to the database with jquery?
Up to now I tried several approches, that didn't work out.
In the updating() method look for the controls by FindControl and set e.Command.Parameter["xyz"] = foundcontrol.SelectedValue;. The values are always the same as in the beginning.
Set <asp:parameter name="SampleValue" /> and in the EditTemplate <asp:TextBox Value='<%# Bind("SampleValue")#> The values are always null.
Set a hidden input field with the selected value via javascript. This doesn't work as the control within EditTemplate are only visible after the switch into edit mode
So maybe I'm totally wrong with my ideas, heading into a totally wrong direction and this can be accomplished much easier, but up to now I don't know how to achieve this. I could do it without ajax, but for the user experience I'd prefer the version with jquery.
For all that have read this far and not got confused :-), thanks for your effort!
Best regards,
Andreas
I would forget using a form view and just use a regular html form with regular input controls. Return an object from your web service that has all of your values and populate the controls with ajax and then subjmit with ajax. Either do fully asp.net or fully html/jquery with asmx back end. Otherwise it's just too confusing.
If you load both "modes" of the FormView into the same page using AJAX, you're probably getting duplicate field names. One of them contains the unchanged values which are being saved. How will ASP.NET know the difference? You only want to submit the ones from the EditTemplate, which will require a separate form (or some other hack).
Or perhaps your HTML submit button isn't giving ASP.NET what it needs to repopulate the controls. Are you using ViewState in the page with the FormView?
All in all, this sounds like a hairy combination of technologies... as you well know.
I'm writing an asp.net web app. and i've hit a bit of a brick wall.
basically i have 2 pages, the main page with a text box in and a popup that contains a treeview.
My problem is this. when i select a treeview item i want the program to perform some database transactions using asp.net and then pass the value retrieved from the database into a javascript function that passes the data back from the popup page to the parent page. My problem is that i cannot find any way of calling a javascript function from asp.net. I've tried assigning attributes to controls on page load, but this does not work as when the page loads the data has not been retrieved from the database.
Have a look at the ClientScriptManager class. You can register scripts from code-behind that will run when the HTML page loads. Those scripts can call other javascript functions on the page.
There are many tutorials and examples on the Web. Here's one I found that may help but there are many more.
How to use the client script manager
You hit the nail on the head when you said "I've tried assigning attributes to controls on page load, but this does not work as when the page loads the data has not been retrieved from the database." You just need to discover when you're pulling the data from the database, and then assign the values after that. Without looking at your code, there's no way to know for sure, but Page_PreRender is probably a good bet to assign your values...it's probably after you're pulling information from the db...it's pretty much the last place that you can make things happen before the html is generated for the client.
You can invoke a function resided in the Main Page and call that function in the Main Page from the Child Page which is your pop up window.
Please refer to these links for references
http://chiragrdarji.wordpress.com/2007/03/10/call-parent-windows-javascript-function-from-child-window-or-passing-data-from-child-window-to-parent-window-in-javascript/
http://www.webmasterworld.com/forum91/2957.htm
http://hspinfo.wordpress.com/2008/01/12/call-parent-windows-javascript-function-from-child-window/
This one helps with retrieving popups from values using javascript
http://www.eggheadcafe.com/articles/20060117.asp
This one shows how to fire a postback using javascript, and manage it in the codebehind.
http://weblogs.asp.net/mnolton/archive/2003/06/04/8260.aspx
If you put them together, and use Control.ClientID to find the actual "html name" of your asp.net controls, you'll be able to set that up in no time.
Might not be the prettiest way to do it in town, and incidentally make little baby Jesus cry, but anyway, it works.
[edit]Oh. I just saw that it seems I answered the question the other way around, or "how to trigger codebehind from Javascript". I think the method I suggest may help you, if you use it right.
The javascript of the popup should pass the information to the parent window, and the parent window function should call a postback when it receives the information.
The javascript of the popup window should be only registered on a postback with the correct information retrieved, so that when the postback occurs on the popup because of the selection of the right information, the window closes and passes the information to the parent page.
The parent page, triggering postback, does the thingies you need it to, and the app resumes "normally" from there on, doing whatever you need it to, outside of the popup page.