When I add this code to my aspx ,
<telerik:RadEditor ID="REWelcome" runat="server"
AutoResizeHeight="True" Width="500px" ToolbarMode="Floating">
<Content>
</Content>
<TrackChangesSettings CanAcceptTrackChanges="False"></TrackChangesSettings>
</telerik:RadEditor>
And I got this error message ,
'~/Telerik.Web.UI.WebResource.axd' is missing in web.config.
RadScriptManager requires a
HttpHandler registration in web.config.
How can I solve it ?
In your web.config - add the following to the system.web (omit the system.web, just used to show you level:
<system.web>
<httpHandlers>
<add verb="*" path="Telerik.Web.UI.WebResource.axd" type="Telerik.Web.UI.WebResource, Telerik.Web.UI" validate="false" />
<add verb="*" path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler, Telerik.Web.UI, Culture=neutral, PublicKeyToken=121fae78165ba3d4"></add>
<add verb="*" path="Telerik.Web.UI.SpellCheckHandler.axd" type="Telerik.Web.UI.SpellCheckHandler, Telerik.Web.UI, Culture=neutral, PublicKeyToken=121fae78165ba3d4"></add>
</httpHandlers>
The bottom two are not needed gnerally but I am assuming you want the extended features of the editor, like dialogs and spellchecking.
I also add location at the same level as system.web
<location path="Telerik.Web.UI.WebResource.axd">
<system.web>
<authorization>
<allow users="*" />
</authorization>
</system.web>
</location>
You also have to add the Telerik.Web.UI.dll file in the bin folder of your application.
That worked for me.
These are the handlers needed for RadEditor and RadScriptManager:
<httpHandlers>
<add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false"/>
<add path="Telerik.Web.UI.SpellCheckHandler.axd" type="Telerik.Web.UI.SpellCheckHandler" verb="*" validate="false"/>
<add path="Telerik.Web.UI.WebResource.axd" type="Telerik.Web.UI.WebResource" verb="*" validate="false"/>
</httpHandlers>
and
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<validation validateIntegratedModeConfiguration="false"/>
<handlers>
<add name="Telerik_Web_UI_DialogHandler_aspx" verb="*" preCondition="integratedMode" path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler"/>
<add name="Telerik_Web_UI_SpellCheckHandler_axd" verb="*" preCondition="integratedMode" path="Telerik.Web.UI.SpellCheckHandler.axd" type="Telerik.Web.UI.SpellCheckHandler"/>
<add name="Telerik_Web_UI_WebResource_axd" verb="*" preCondition="integratedMode" path="Telerik.Web.UI.WebResource.axd" type="Telerik.Web.UI.WebResource"/>
</handlers>
</system.webServer>
source: http://www.telerik.com/forums/telerik-web-ui-webresource-axd-is-missing-in-web-config-f25e27e5a5ac
if the error message is like this::
~/Telerik.Web.UI.WebResource.axd' is missing in web.config. RadScriptManager requires a HttpHandler registration in web.config. Please, use the control Smart Tag to add the handler automatically, or see the help for more information: Controls > RadScriptManager
Then you add the following into your web.config file:::
<httpRuntime targetFramework="4.5.2" />
<httpHandlers>
<add path="Telerik.Web.UI.WebResource.axd" type="Telerik.Web.UI.WebResource" verb="*" validate="false" />
</httpHandlers>
I fixed it by changing the ASP Application pool from "Integrated" to "Classic" mode. All my configurations were correct, as described in other posts here. This is probably specific to my configuration, but may be worth trying.
I came across this issue while deploying to IIS 7.
You could set the Managed pipeline mode from Integrated to Classic. This indeed solves the problem with behaving IIS 7.5 as old 6.0 (with handler registered in old web.config node), but I wasn’t convinced that to use Telerik’s controls, I should use old type of pipeline.
Our old web.config file registered Telerik’s handler only in old section for IIS 6 (and that sufficed for cassini and IIS 6.0) and not in new section.
So I had to add this piece of xml to web.config :
<system.webServer>
<handlers>
<add name="Telerik.Web.UI.WebResource" path="Telerik.Web.UI.WebResource.axd" verb="*" type="Telerik.Web.UI.WebResource, Telerik.Web.UI" />
</handlers>
</system.webServer>
There is a very detailed KB article on this matter including all possible reasons for the error and how to fix it. Please check it out at Error: Web.config registration missing! The Telerik dialogs require a HttpHandler registration in the web.config file.
One of the best solutions is to open the web.config file and replace Telerik.Web.UI.DialogHandler.aspx with Telerik.Web.UI.DialogHandler.axd
<system.web>
<httpHandlers>
<add path="Telerik.Web.UI.DialogHandler.axd" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false"/>
</httpHandlers>
</system.web>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<handlers>
<remove name="Telerik_Web_UI_DialogHandler_axd"/>
<add name="Telerik_Web_UI_DialogHandler_axd" path="Telerik.Web.UI.DialogHandler.axd" type="Telerik.Web.UI.DialogHandler" verb="*" preCondition="integratedMode"/>
</handlers>
</system.webServer>
and after that to set the RadEditor's DialogHandlerUrl property to "~/Telerik.Web.UI.DialogHandler.axd", i.e.
I got this error today when copying a published copy of a site from one server to another.
I figured that I shouldn't have to modify any scripts or code to get it to work again, after all, the site still worked just fine on its old server it is still being hosted on.
This is what I believe happened:
I copied the site files over, hooked up a site and bindings to it in IIS, and then tried to run it.
I got errors, and was forced to modify file handler bindings, the .net framework version of the app pool, and install new server roles/features to get it to at least produce this error.
I then deleted everything in the folder and re-copied the site files and it started working again.
IIS must have modified my site files in some way that prevented the site from working, and restoring the original code fixed it.
I know this is a very specific set of circumstances, but hopefully if someone else has the same situation some day they can solve it in the same simple way that I did.
My application has a custom HTTPModule for handling friendly URLs.
And here is the modules section of the web.config file.
<modules>
<remove name="ScriptModule"/>
<remove name="Session"/>
<add name="Session" type="System.Web.SessionState.SessionStateModule" preCondition=""/>
<add name="NHibernateSessionModule" type="MyApp.Core.NHibernateBase.NHibernateSessionModule"/>
<add name="ApplicationModule" type="MyApp.ApplicationModule"/>
<add name="URLDispatcher" type="MyApp.URLDispatcher"/>
<add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</modules>
The module also has logic to handle error pages. The problem that I have now is when a request with a url ending with '.' is sent to the server, none of my modules are triggered and the user sees the default asp.net 404 page.
Not sure what's happening and how to redirect the users to my custom 404 page.
I did find another question related to this, and the solution provided was to use one of the .Net 4 specific configuration tag in the web.config file. At the moment I am not in a position to move to .Net 4. So, I am looking for a different solution. Any suggestions?
I guess you are using http redirection for friendly urls.
If the application is under IIS7 , please check that you have installed the following feature:
Control Panel --> Progams --> Turn off windows features --> World wide web Services --> Common HTTP Features –> HTTP Redirection
And then you need to config your custom http module not only in
<system.web>
<httpModules>
<add name="CustomModule" type="NameSpace.ClassName, AssemblyName" />
</httpModules>
</system.web>
but also in
<system.webServer>
<modules runAllManagedModulesForAllRequests="true">
<add name="CustomHttpModule" type="NameSpace.ClassName" />
</modules>
</system.webServer>
I am getting 404 not found status codes for my minified javascripts files and also there is an error ASP.Net ajax client side framework failed to load.
I have given my configuration settings in the web.config below,
<httpModules>
<!-- Component Art-->
<add type="ComponentArt.Web.UI.UploadModule,ComponentArt.Web.UI" name="ComponentArtUploadModule"/>
<!--Blog Engine-->
<add name="WwwSubDomainModule" type="BlogEngine.Core.Web.HttpModules.WwwSubDomainModule, BlogEngine.Core"/>
<add name="UrlRewrite" type="BlogEngine.Core.Web.HttpModules.UrlRewrite, BlogEngine.Core"/>
<add name="CompressionModule" type="BlogEngine.Core.Web.HttpModules.CompressionModule, BlogEngine.Core"/>
<add name="ReferrerModule" type="BlogEngine.Core.Web.HttpModules.ReferrerModule, BlogEngine.Core"/>
<!--Remove the default ASP.NET modules we don't need-->
<remove name="PassportAuthentication"/>
<remove name="Profile"/>
<remove name="AnonymousIdentification"/>
</httpModules>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<modules>
<add type="DevExpress.Web.ASPxClasses.ASPxHttpHandlerModule, DevExpress.Web.v10.2, Version=10.2.8.0, Culture=neutral, PublicKeyToken=b88d1754d700e49a" name="ASPxHttpHandlerModule"/>
</modules>
<handlers>
<add name="ComponentArtScriptHandler" type="ComponentArt.Web.UI.ScriptHandler,ComponentArt.Web.UI" path="ComponentArtScript.axd" verb="*" />
</handlers>
</system.webServer>
I cant figure out whether I am missing any configuration or added something extra. Can somebody have a look
If you're getting "not found" error, there's something wrong with resolving the path. Either the path/file doesn't exist (because it's somewhere else for instance), or you have some conflicting rules in rewrite/routing engine.
Try to use, as a temporary fix, absolute paths. That means instead of
href="../../my.js"
you'd write
href="http://mypage.com/js/my.js"
Similar to #walther
href="/js/my.js"
As the first slash will take the path to the root of the URL, so useful for when moving between different environments (provided your dev isn't in a subfolder).
I have an asp.net website using the form controls from Telerik. It's just moved to a new server but I keep getting a 500 Internal Server Error.
Removing the httpHandlers section of the web.config makes server error go away, although then it complains if there is a Telerik control on the page. The whole config file is valid XML. Is there anything wrong with this code?
<httpHandlers>
<add path="Telerik.Web.UI.WebResource.axd" verb="*" type="Telerik.Web.UI.WebResource, Telerik.Web.UI, Version=2008.2.826.20, Culture=neutral, PublicKeyToken=121fae78165ba3d4" validate="false"/>
</httpHandlers>
I see you mention it has just moved to a new server. Was this an IIS6 to IIS7+ migration?
IIS7 uses <system.webServer\handlers> instead of the IIS6 <httpHandlers> section. On top of this it will throw an error by default if you have the settings in the old section even if the new section is populated correctly.
Try this:
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
<modules runAllManagedModulesForAllRequests="true" />
<!-- modules here -->
</modules>
<handlers>
<!-- modules here -->
<add name="Telerik.Web.UI.WebResource" path="Telerik.Web.UI.WebResource.axd" verb="*" type="Telerik.Web.UI.WebResource, Telerik.Web.UI, Version=2008.2.826.20, Culture=neutral, PublicKeyToken=121fae78165ba3d4" />
</handlers>
</system.webServer>
The validateIntegratedModeConfiguration="false" will allow you to keep your httpHandlers section populated without throwing an error (useful if you are debugging on a cassini / iis6 server) and the entry in the <handlers> section will configure it for your IIS7 server.
The runAllManagedModulesForAllRequests="true" is not strictly required but you will probably find yourself needing it if you are new to configuring IIS7 :)
Is the new server perhaps running IIS7?
Then try this
<system.webServer>
<handlers>
<add path="Telerik.Web.UI.WebResource.axd" verb="*" type="Telerik.Web.UI.WebResource, Telerik.Web.UI, Version=2008.2.826.20, Culture=neutral, PublicKeyToken=121fae78165ba3d4" validate="false"/>
</handlers>
</system.webServer>
Also, make sure you have the exact version that you have specified in the Handlers section. You do not actually need the Version, Culture, and Public Token parameters specified in your web.config in order for it to work. They are there incase you are using more than one version in your application. Without them being specified, the server will use the first one that it finds referenced in your project. So, if you are only using one version of an assembly, you can omit the parameters.
Make sure that you have the Telerik DLL Telerik.Web.UI.dll referenced in your project and that CopyLocal is set to "true". Also, make sure (using File | Properties) that you have the right version on the server, too.
I am trying to deploy an ASP.NET application. I have deployed the site to IIS, but when visiting it with the browser, it shows me this:
Server Error
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
After fiddling around with the web.config, I got:
The page cannot be displayed because an internal server error has occurred.
How can I see the actual issue behind this server error?
First, you need to enable and see detailed errors of your web messages, because this is a general message without giving information on what's really happening for security reasons.
With the detailed error, you can locate the real issue here.
Also, if you can run the browser on the server, you get details on the error, because the server recognizes that you are local and shows it to you. Or if you can read the log of the server using the Event Viewer, you also see the details of your error.
###On IIS 6
<configuration>
<system.web>
<customErrors mode="Off"/>
<compilation debug="true"/>
</system.web>
</configuration>
###On IIS 7
<configuration>
<system.webServer>
<httpErrors errorMode="Detailed" />
<asp scriptErrorSentToBrowser="true"/>
</system.webServer>
<system.web>
<customErrors mode="Off"/>
<compilation debug="true"/>
</system.web>
</configuration>
Note: You can avoid the Debug=true. You only need to close the custom errors for a while and get the detailed error page.
This can help: How to enable the detailed error messages (from IIS).
I was pulling my hair out over this issue. Making sure the following entry was in the root web.config file fixed it for me:
<configuration>
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
</system.webServer>
</configuration>
Remember that you have to add this to the existing XML elements, if they're already there. You can't just add at the end of the file, because you can't have multiple copies of any element.
For me, the following code in the web.config was the culprit. When I removed it, the web site worked fine.
<staticContent>
<mimeMap fileExtension=".mp4" mimeType="video/mp4" />
</staticContent>
I finally solved this "500 Internal server" error when deploying the ASP.NET MVC 3.0 application on godaddy.ocm shared hosting.
somehow there were discrepancies on the version of DLL files referenced and version mentioned in file web.config.
I tried all the options mentioned in various forum. Nothing helped, although everyone suggested the same kind of fix, but somehow it didn't work in my scenario. Finally after banging my head for two days.
I decided to delete all DLL file reference and delete web.cofig (make a local copy) from the project and let the application throw the error and then add the DLL files one by one making copy to local=true.
After all the DLL files were added, I created a new ASP.NET MVC application and copied the web.config of new application to my actual application.
So my actual application now has a new web.config, and then I copied the connectionstring and other references from the local copy of web.config that I saved.
I just compiled the application and published to a local folder
and FTP the published folder to goDaddy.
It worked and finally my problem was solved.
In my case, I put a mistake in my web.config file. The application key somehow was put under the <appSettings> tag. But I wonder why it doesn't display a configuration error. The error 500 is too generic for investigating the problem.
My first attempt to publish and then run a very simple site serving only HTML produced "The page cannot be displayed because an internal server error has occurred."
The problem: I had the site set to .NET 3.5 in Visual Studio (right click web site project -> Property Pages -> Build), but had the Web Site in Azure configured as .NET 4.0. Oops! I changed it to 3.5 in Azure, and it worked.
In addition to the other suggestions, make sure to change the existingResponse attribute of the httpErrors node to Auto from Replace, or to remove that property entirely.
<httpErrors existingResponse="Replace" />
^^^^^^^ not going to work with this here
Server Error 500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed. Goddady. Hosting - Web - Economy - Windows Plesk
In my case, I replace this code:
<configuration>
<system.webServer>
<httpErrors errorMode="Detailed" />
<asp scriptErrorSentToBrowser="true"/>
</system.webServer>
<system.web>
<customErrors mode="Off"/>
<compilation debug="true" targetFramework="4.0"/>
</system.web>
</configuration>
Then change framework 3.5 to framework 4. It shows my detailed error. I delete code in:
<httpModules></httpModules>
It solved my problem.
IIS also reports status code 500 without any event log hints if there are insufficient permissions on the physical home directory (i.e. IIS_IUSRS has no access).
For IIS 10 There is a extra step to do other than changing the customErrors=Off to show the error content.
<system.web>
<customErrors mode="Off" />
</system.web>
<system.webServer>
<httpErrors existingResponse="PassThrough" errorMode="Detailed"/>
</system.webServer>
Raul answered the question in this link Turn off IIS8 custom errors by Raul
Probably your web.config file is wrong or is missing some tag. I solved my problem using the correct config tags for .NET 4.
<system.web>
<compilation debug="true" strict="false" explicit="true" targetFramework="4.0">
<assemblies>
<add assembly="System.Deployment, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Drawing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
<add assembly="System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
</assemblies>
</compilation>
<pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID">
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<authentication mode="None"/>
</system.web>
I realized the permissions for the files and folders in your server also matter. I uploaded my files from a linux operating system and usually the permissions are limited for read and write. So when uploaded, the permission are still same as in the local machine.
I had the same error and i just changed the permissions for the folder i had uploaded and the error was gone.
Hope it helps someone.
500 Internal Error
Windows Hosting Error
Godaddy Hosting issue
I have been facing the same issue, but now my issue has been resolved. Always use in this hosting this it works.
I will also recommend you all to do whatever changes you are looking to make in your web.config file. Please do it one by one and test the same on the live domain so that you can find the exact problem or the features that your hosting provider does not allow you to use.
<?xml version="1.0"?>
<configuration>
<system.web>
<trust level="Medium"/>
<compilation debug="true" targetFramework="4.5">
<assemblies>
<add assembly="System.Data.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
</assemblies>
</compilation>
<httpRuntime targetFramework="4.5" />
<sessionState mode="InProc" cookieless="false" timeout="90" />
<authentication mode="Forms">
<forms loginUrl="default.aspx"
defaultUrl="default.aspx"
protection="All"
cookieless="UseCookies"
slidingExpiration="false"
timeout="30"
name="aeon.corpusjuris.in" />
</authentication>
<customErrors
mode="Off"
defaultRedirect="errorpage.aspx">
<error statusCode="403" redirect="errorpage.aspx"/>
<error statusCode="404" redirect="errorpage.aspx"/>
</customErrors>
<!-- <httpModules>
<add name="HTTPCaching" type="HTTPCaching"/>
</httpModules>
-->
</system.web>
<runtime>
<performanceScenario value="HighDensityWebHosting" />
</runtime>
<system.webServer>
<!-- <modules runAllManagedModulesForAllRequests="true">
<add name="HTTPCaching" type="HTTPCaching"/>
</modules>
-->
<defaultDocument>
<files>
<clear />
<add value="default.aspx" />
</files>
</defaultDocument>
<httpErrors errorMode="Detailed" />
<asp scriptErrorSentToBrowser="true"/>
<staticContent>
<clientCache cacheControlCustom="public"
cacheControlMaxAge="60:00:00"
cacheControlMode="UseMaxAge" />
</staticContent>
</system.webServer>
<system.web.extensions>
<scripting>
<webServices>
<jsonSerialization maxJsonLength="90000000">
</jsonSerialization>
</webServices>
</scripting>
</system.web.extensions>
</configuration>
If you're using a custom HttpHandler (i.e., implementing IHttpModule), make sure you're inspecting calls to its Error method.
You could have your handler throw the actual HttpExceptions (which have a useful Message property) during local debugging like this:
public void Error(object sender, EventArgs e)
{
if (!HttpContext.Current.Request.IsLocal)
return;
var ex = ((HttpApplication)sender).Server.GetLastError();
if (ex.GetType() == typeof(HttpException))
throw ex;
}
Also make sure to inspect the Exception's InnerException.
500 internal server error can arise due to several reasons. First reason might be that web.config file is not properly created, means you have missed some tag in the web.config file. Secondly this error can be due to some code problem. To check which component of the web application is causing this error you can check Application setting in web.config file. The detail of solving and tracing 500 internal server error with diagram is given here:
Make sure your account uses IIS 7. For more information, see Customizing IIS Settings on Your Windows Hosting Account.
Follow the instructions in Changing Pipeline Mode on Your Windows IIS 7 Hosting Account. Select Integrated Pipeline Mode.
In your Project References section, set Copy Local to True for the following assemblies:
System.Web.Abstractions
System.Web.Helpers
System.Web.Routing
System.Web.Mvc
System.Web.WebPages
Add the following assemblies to your project, and then set Copy Local to True:
Microsoft.Web.Infrastructure
System.Web.Razor
System.Web.WebPages.Deployment
System.Web.WebPages.Razor
Publish your application.
Sometimes, the reason might be one of your .dll assemblies is not registered correctly on the server.
For example, you can successfully run a C# Excel web application on your local machine with Office installed, while getting the 500 error on server deployment, because there is no Office suite installed on the server, and thus you get the server error.
For those who have this possibility (VPS hosting not web hosting):
Connect to your hosting server via Remote Desktop. Open Web Browser from your remote desktop and you will see the detail description of the error.
You don't need to modify web.config or expose any details to anybody else.
If you are using IIS 8.5 it may be that you need to change the ApplicationPool ID setting from ApplicationPoolId to NetworkService
Right click the Application Pool in question, click on "Advanced Settings" and then scroll down to ID - it will probably be set to ApplicationPoolIdentity. Click the button (..) and select NetworkService from the dropdown list instead.
Also make sure that if it is a .NET 2.0 application that you are not referencing the 4.0 framework in your App Pool.
Before changing the web.config file, I would check that the .NET Framework version that you are using is exactly (I mean it, 4.5 != 4.5.2) the same compared to your GoDaddy settings (ASP.Net settings in your Plesk panel). That should automatically change your web.config file to the correct framework.
Also notice that for now (January '16), GoDaddy works with ASP.Net 3.5 and 4.5.2. To use 4.5.2 with Visual Studio it has to be 2012 or newer, and if not 2015, you must download and install the .NET Framework 4.5.2 Developer Package.
If still not working, then yes, your next step should be enabling detailed error reporting so you can debug it.
I recently got into same problem, the disk space was full on the server. Clearing some space has resolved the issue.
Try compiling in Debug mode (in Visual Studio). If you are in Release mode, a lot of URL Rewrite errors will not be available.
Image shows the Debug selection combobox in Visual Studio