Sysinternals' Portmon: Error 2 - serial-port

Question

When I try to connect to local ports, Computer -> Connect local, using Portmon v. 3.02, I'm getting an error message, Error 2, in a small error dialog box:
I run the tool as an administrator (if not, I get error 6).
By the way this is a Windows 7 x64. On 32-bit, in Windows 7 x86, it works fine. How can I fix this problem?

Answer 1

Sysinternals' Portmon works only on 32-bit versions of Windows. It does not support 64-bit (probably its driver is not signed).
From the Portmon homepage:
Runs on:
Client: Windows XP (32-bit) and higher (32-bit).
Server: Windows Server 2003 (32-bit) and higher (32-bit).

Answer 2

In Windows Explorer, right click on portmon.exe --> select Properties --> click the Compatibility tab, and Run in Windows XP compatibility mode. It works fine like that in Windows 7 64-bit.

Answer 3

"Error 2" is "Cannot find the file specified", that is, cannot find a required DLL file.
Originally, you got this error when you tried to run Portmon from a network location: that broke the security trust, causing Portmon to be untrusted (or perhaps just messing up the search path somehow).
On my copy of Windows 7 64 bit, Microsoft Dependency Walker (depends.exe) tells me that PORTMSYS.SYS (the file created/loaded by Portmon.exe), has unresolved dependencies on ci.dll, clfs.sys, hal.dll and kdcom.dll.
Those are the
code integrity
common log file system
hardware abstraction layer
kernel debugger com
libraries, and they aren't actually missing: if they were, Windows wouldn't boot. However, I don't see a copy of those files in SysWow64. This suggests to me that the problem is not with portman.sys: the problem is with the win32 compatibility layer in Windows 7/64 bit: It doesn't support debug properly.
It is now 2018. There is no 64-bit version of Portmon. Serial ports are a legacy standard. The Windows 7 problem was fixed by the release of Windows 8.1. However, there is a faint chance that some Visual Studio utility or security update back-ported to Windows 7 will fix the problem. Perhaps someone who is familiar with SysWow and debugging will comment.

Answer 4

Instead of portmon for Windows x64, you can use an emulator of a pair of virtual COM ports and a simple program that will connect the physical port and one of the virtual ones, as well as perform the logging function.
To create a pair of virtual COM ports you can use:
com0com (preferably version "com0com-2.2.2.0-x64-fre-signed", because it contains signed x64 driver)
Virtual Serial Ports Emulator (VSPE), every time it starts on x64 it asks to purchase a driver, but it works even if you refuse.
Simple mapping and logging program can be found e.g. here or you can write it yourself, it is simple.
The sequence of actions is follows:
Сreate a pair of virtual COM ports using emulator (for example, COM28 and COM29)
Let the external device be connected to the computer COM1 port. In the program, whose exchange with external device we want to listen to, we set up a port COM28 (instead of СОМ1) for communication.
In the mapping program, we set up that we want to bind and log ports COM1 and COM29 (don't forget to set the port baud rate).

Answer 5

I haven't tried it yet, but this question mentions com0com. It creates two virtual serial ports and emulates a null modem cable between them. It claims to be able to run on 64 bit Windows. I'm not sure whether it comes with software that lets you just pipe input from a real port into one of the virtual ports. One of the FAQ's says that you can turn on logging.
I guess in the worst case, you could write your own small program that pipes data from a real port to one of the virtual ports and logs it all.
There's also this question on open-source alternatives that mentions a couple of projects.

Answer 6

I've used AccessPort
http://sudt.com/en/ap/download.htm and it works great. Very similar to Portmon

Answer 7

Don't start Portmon from a network drive/path or something else.
Copy on to the hard disk drive, e.g. on the desktop, restart and try again!

Answer 8

If you run Portmon in compatibility mode, it will work.
Check Make older programs run in this version of Windows.
It says:
To run the Program Compatibility troubleshooter:
Open the Program Compatibility troubleshooter by clicking the Start button Picture of the Start button, and then clicking Control Panel. In the search box, type troubleshooter, and then click Troubleshooting. Under Programs, click Run programs made for previous versions of Windows.
Follow the instructions in the troubleshooter.
The above is a public explanation from Microsoft for a common situation when running older applications in Windows.
But, I can say it briefly;
Right click on portmon.exe
Select menu about "troubleshooting compatibility problem" or something like that (I'm using a foreign version of Windows, so I don't see correct name of that menu in English.)
Select automatic mode
It will detect the problem and recommend Windows XP (SP2) mode
Select it and execute Portmon again.
I hope it works!

Answer 9

Instead of Portmon you can also use the IO Ninja program with the "Serial Monitor" plugin.
It gives a little less information than Portmon, but in a more understandable form. The main thing is, just like a Portmon, it allows you to see the data that is transmitted between a third-party application and an external device via a serial port. The program works under modern versions of Windows (I tried it myself on Windows 10 x64). The aforementioned plugin "Serial Monitor" is paid (but has an evaluation period).
Note: the port that you want to monitor must first be connected to the "IO Ninja" program, and then opened in a third-party application whose exchange with an external device you want to track.

Answer 10

Just to test that the hardware is working, you could perhaps boot a Linux live CD and run the statserial and/or minicom program to verify that it works. The Knoppix distribution seems to contain both those programs.
Serial ports on Linux are named /dev/ttyS0 for COM1, /dev/ttyS1 for COM2, etc.