Closed. This question is not about programming or software development. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 days ago.
Improve this question
I was working remotely connecting to Raspberry pi via vnc. Then I plugged in the camera and the screen did not come on when it was remotely connected (cannot currently show the desktop), I changed the settings related to it and the problem was not solved. Then I wanted to connect it to the screen and continue, and I saw that there was an internet problem. I tried several solutions I found on the internet (starting wifi, checking ping, deleting and reinstalling raspian, etc.). The problem is still not resolved. My problem is there is no wifi connected internet. Then I connected the internet not via wifi but via wired ethernet and got the same issue. What should I do ?
When you go to GOOGLE it says below
DNS_PROBE_FINISHED_NO_INTERNET
No problems with other devices connected to the same network.
starting wifi, checking ping, deleting and reinstalling raspian
Related
Closed. This question is not about programming or software development. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 4 days ago.
Improve this question
So in my school they installed a new router (Zylex) and I guess they're still configuring it because it doesn't let you enter almost any website from Google, although you can do google search. Also you can access most sites using Firefox (do you know why?), but I don't know any good VPN for Firefox.
I've tried using some google VPNs but they are all blocked, also I've tried using Windscribe but it says that the SSL requests are being intercepted. Why would they do that?
Is there a way that I can evade the firewall?
Thanks in advance.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 4 years ago.
Improve this question
So the reason I am writing here is because I did not find a solution for this problem anywhere else. Hence, Kindly read the whole post before marking it as a duplicate thread. And if indeed, this question is answered, kindly lead me to it.
So I have a Dell XPS 13 9350 with Windows 10 on it. I installed Virtual Box and run Windows 7 on it. Now here is the problem, the network adapter works fine but it shows as an ethernet adapter and not as a wireless adapter. And I want it to be a wireless adapter so I can connect it to the EZCast Dongle I use.
Here is what I have done so far -
I have left the Virtual Box network preference to default
I have changed the network adapter to Bridge Mode & selected my Wlan adapter on the VM machine settings
Kindly request you all to help me out with this.
Cheers,
Jesse
Connect your dongle with host. Enable USB in virtual box settings and select the dongle.
save configuration and reboot your guest.
Ex:
Maybe you need to download and install the Extension Pack to enable USB ports.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 7 years ago.
Improve this question
This is not a coding question but I can't find a clear answer anywhere so I thought the stackoverflow community will know. Let's say, I'm currently using computer A and running Remote Desktop on Windows to access computer B. From computer B, I sign in to a website. Would the admin for that website be able to tell I was on computer A when I signed in? Or can they only pick up my computer B IP address? I don't know much about networking and remote desktop so any help is appreciated.
Your IP will be of computer B. You can think of Remote Desktop as a TV (with which you can interact) - the images from the remote computer are transmitted to your computer, but all actions still happen on the remote computer.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 7 years ago.
Improve this question
My host operating system is Ubuntu 12.04, in which I have VirtualBox installed. Then I have two Windows 7 guest machines configured in the VirtualBox. I need to communicate between the two Windows machines. I have tried using Bridged Networking and Internal Networking with reference to the following article:
http://www.virtualbox.org/manual/ch06.html
I used the same network name for both networking types in my experiments. However, I'm still unable to ping from one Windows machine to the other. If there is anyone who has done this, please give me some guideline how to do so.
Thank you.
It should work with Bridge networking, when both virtual boxes (and eventually also the host) will be on the same LAN.
HOWEVER, Notice that typically Windows will respond to ping request ONLY if there is at least one shared folder! If you don't have any shared folders, Windows will not return the ping, and that's where the problem may be.
So I suggest you share a folder on both Windows machines, set them up with bridge networking and try to ping again.
Hope that help!
Perhaps you could try the suggestions here.
Working solution involves a combination of Bridged Adapter + NAT + Host-only Adapter.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
Is it possible to run more than one virtual machines on my PC using virtual box/ vmware/ virtual pc etc and connecting all of them together? So if i write an application like a chat program or something else, it treats running image as separate machine.
All machines should have different IP addresses and they could have different OS as well.
Please tell me how can i do this.
You will have to start with a machine that has loads of RAM and CPU power. Other than that there is nothing difficult. All you have to do is install virtual box(Freely available) And download several Linux flavors(You can use windows too) mount the drives in virtual box and start creating the machines. You can start all of them together if you want to and they will have different IP addresses.
Read
http://forums.virtualbox.org/viewtopic.php?p=33943#33943
http://www.virtualbox.org/manual/ch02.html
http://www.virtualbox.org/manual/ch03.html
Finally
http://www.virtualbox.org/manual/ch06.html#network_internal