I followed this instructor to start with my Arduino.
As far as I try to do step number 13 (upload something) it returns:
open NUL: The system cannot find the file specified.
Error compiling for board LOLIN(WEMOS) D1 R2 & mini.
Related
I am having some issues with the Send Data with Sound Project on Arduino. I have my Arduino nano BLE sense, ChirpSDK by Asio Ltd Version 3.4.0 installed, I put in the CHIRP_APP_KEY, CHIRP_APP_SECRET, CHIRP_APP_CONFIG from the chirp website, and I also have the Arduino nano BLE board selected when uploading the code. But for some reason I keep getting this error below:
ChirpColor:22:10: error: chirp_connect.h: No such file or directory
#include "chirp_connect.h"
^~~~~~~~~~~~~~~~~
compilation terminated.
exit status 1
chirp_connect.h: No such file or directory
Any help would be very much appreciated, thanks.
The SDK functions have been renamed in the latest release. So connect is replaced with sdk.
With the latest version, you need to
#include "chirp_sdk.h"
See the latest header file for the function declarations - https://github.com/chirp/chirp-arduino/blob/develop/src/chirp_sdk.h
I wanted to upload Arduino sketches to my RaspberryPi 3+ b so I downloaded the RasPiArduino folder from me-no-dev and so on but at the end it gave me this error: Error compiling for board RaspberryPi B+/2
How can I make my Pi 3 usable for Arduino?
I am using the excellent http://platformio.org/ together with Visual Studio Code to develop for Teensy 3.6 (an Arduino compatible board).
This works great. But I wanted to do better debugging via SWD (serial wire debug).
So I disconnected the Arduino-compatible USB-chip and connected via SWD and JLINK instead. Similar to this: https://mcuoneclipse.com/2017/04/29/modifying-the-teensy-3-5-and-3-6-for-arm-swd-debugging/
I can flash firmware that I built via platformio using the "J-Link Lite" software just fine. Also I can run the J-Link GDB Server without a problem.
But I can't get the IDE integration to work.
My platformio.ini looks like this:
[env:teensy36]
platform = teensy
board = teensy36
framework = arduino
upload_protocol = jlink
debug_tool = jlink
Still the upload_protocol is ignored and when I invoke upload (platformio.exe run --target upload) via the IDE all I get is
Linking .pioenvs\teensy36\firmware.elf
Checking program size
text data bss dec hex filename
17348 172 2696 20216 4ef8 .pioenvs\teensy36\firmware.elf
Building .pioenvs\teensy36\firmware.hex
Uploading .pioenvs\teensy36\firmware.hex
Teensy Loader, Command Line, Version 2.1
Read ".pioenvs\teensy36\firmware.hex": 17520 bytes, 1.7% usage
Soft reboot is not implemented for Win32
Waiting for Teensy device...
(hint: press the reset button)
So it's still trying to upload via Arduino compatible USB connection instead of via SWD connection. How can I get platformio to change the upload method or upload_protocol?
From Project Configuration File platformio.ini, it provides an example of how to configure Jlink GDB server:
[env:bluepill_f103c8]
...
; Debug options
debug_tool = custom
debug_server =
JLinkGDBServer
-singlerun
-if
SWD
-select
USB
-port
2331
-device
STM32F103C8
If JLinkGDBServer.exe is not included in PATH, then you need to specify the full file name of JLinkGDBServer.exe.
I have tried this, it works.
There is another example of using JlinkGDBServerCL.exe - J-Link and ST Nucleo.
I have a Particle Photon which I'm trying to setup. I've tried flashing code both from the web IDE, and locally and it always times out. The device is connecting as it can be seen in these pictures:
The web IDE does not give me much information. It only says "Request Timed Out". This is what I get when I try to flash an .ino code
MacBook-Pro:Desktop User$ particle flash ABCDEFGH123456789 sketch_jun09a/
Including:
sketch_jun09a/sketch_jun09a.ino
attempting to flash firmware to your device ABCDEFGH123456789
Flash device failed.
Request Timed Out
And when I try to flash a firmware.bin file this is what I get:
MacBook-Pro:Downloads Usesr$ particle flash --usb firmware.bin
Found DFU device 2b04:d006
spawning dfu-util -d 2b04:d006 -a 0 -i 0 -s 0x080A0000:leave -D firmware.bin
dfu-util 0.9
Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
Copyright 2010-2016 Tormod Volden and Stefan Schmidt
This program is Free Software and has ABSOLUTELY NO WARRANTY
Please report bugs to http://sourceforge.net/p/dfu-util/tickets/
dfu-util: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
Opening DFU capable USB device...
ID 2b04:d006
Run-time device DFU version 011a
Claiming USB DFU Interface...
Setting Alternate Setting #0 ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
DFU mode device DFU version 011a
Device returned transfer size 4096
DfuSe interface name: "Internal Flash "
Downloading to address = 0x080a0000, size = 5224
Download [=========================] 100% 5224 bytes
Download done.
File downloaded successfully
dfu-util: Error during download get_status
Error writing firmware...dfu-util: Invalid DFU suffix signature
dfu-util: A valid DFU suffix will be required in a future dfu-util release!!!
dfu-util: Error during download get_status
I've seen online that the firmware.bin file seems to be compiled for the Particle Core, and not the Photon, so the device does not allow the code to be flashed. How should I compile the code for it to work? Is there any other solution to this problem? Thank you in advance.
You won't be able to flash a Core firmware to a Photon (they have different architecture and firmware layout). To compile the code for photon you can also use the CLI:
$ particle compile photon sketch_jun09a/
the resulting binary can be flashed using the CLI the same way you did.
To figure out the failed over the air flash I would recommend contacting the support.
I have an ESP-12F module and installed the ESP-12 from this board manager link http://arduino.esp8266.com/stable/package_esp8266com_index.json.
This image contain the settings these are my Arduino settings for ESP-12F .
It always gives an error message like:
"Arduino: 1.6.12 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, 115200, 4M (3M SPIFFS)"
exec: "C:\\Users\\SUM\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++": file does not exist
Error compiling for board NodeMCU 1.0 (ESP-12E Module).
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
"
Note: Power source is USB cable. Thanks in advance.
You need to run 'get.py' in esp8266/tools/ This will download the missing files.
The full git installation instruction are here.