I am trying to figure out how to sample from a custom density in rJAGS but am running into issues. having searched the site, I saw that there is a zeroes (or ones) trick that can be employed based on BUGS code but am having a hard time with its implementation in rJAGS. I think I am doing it correctly but keep getting the following error:
Error in jags.model(model1.spec, data = list(x = x, N = N), n.chains = 4, :
Error in node dpois(lambda)
Length mismatch in Node::setValue
Here is my rJAGS code for reproducibility:
library(rjags)
set.seed(4)
N = 100
x = rexp(N, 3)
L = quantile(x, prob = 1) # Censoring point
censor = ifelse(x <= L, 1, 0) # Censoring indicator
x[censor == 1] <- L
model1.string <-"
model {
for (i in 1:N){
x[i] ~ dpois(lambda)
lambda <- -N*log(1-exp(-(1/mu)))
}
mu ~ dlnorm(mup, taup)
mup <- log(.0001)
taup <- 1/49
R <- 1 - exp(-(1/mu) * .0001)
}
"
model1.spec<-textConnection(model1.string)
jags <- jags.model(model1.spec,
data = list('x' = x,
'N' = N),
n.chains=4,
n.adapt=100)
Here, my negative log likelihood of the density I am interested in is -N*log(1-exp(-(1/mu))). Is there an obvious mistake in the code?
Using the zeros trick, the variable on the left-hand side of the dpois() relationship has to be an N-length vector of zeros. The variable x should show up in the likelihood somewhere. Here is an example using the normal distribution.
set.seed(519)
N <- 100
x <- rnorm(100, mean=3)
z <- rep(0, N)
C <- 10
pi <- pi
model1.string <-"
model {
for (i in 1:N){
lambda[i] <- pow(2*pi*sig2, -0.5) * exp(-.5*pow(x[i]-mu, 2)/sig2)
loglam[i] <- log(lambda[i]) + C
z[i] ~ dpois(loglam[i])
}
mu ~ dnorm(0,.1)
tau ~ dgamma(1,.1)
sig2 <- pow(tau, -1)
sumLL <- sum(log(lambda[]))
}
"
model1.spec<-textConnection(model1.string)
set.seed(519)
jags <- jags.model(model1.spec,
data = list('x' = x,
'z' = z,
'N' = N,
'C' = C,
'pi' = pi),
inits = function()list(tau = 1, mu = 3),
n.chains=4,
n.adapt=100)
samps1 <- coda.samples(jags, c("mu", "sig2"), n.iter=1000)
summary(samps1)
Iterations = 101:1100
Thinning interval = 1
Number of chains = 4
Sample size per chain = 1000
1. Empirical mean and standard deviation for each variable,
plus standard error of the mean:
Mean SD Naive SE Time-series SE
mu 4.493 2.1566 0.034100 0.1821
sig2 1.490 0.5635 0.008909 0.1144
2. Quantiles for each variable:
2.5% 25% 50% 75% 97.5%
mu 0.6709 3.541 5.218 5.993 7.197
sig2 0.7909 0.999 1.357 1.850 2.779
I am trying to understand how to use mixed linear models to analyse my data by simulating a model, but I can't reproduce the input parameters. What am I missing?
I want to start simulating a model with a random intercept for each subject. Here is the formula of what I want to simulate and reproduce:
If beta1 (<11) is small I find gamma00 as the intercept in fixed section, but I am completedly unaable to retrieve the slope (beta1). Also, the linear effect is not significant. Where is my conceptual mistake?
library(lmerTest)
# Generating data set
# General values and variables
numObj <- 20
numSub <- 100
e <- rnorm(numObj * numSub, mean = 0, sd = 0.1)
x <- scale(runif(numObj * numSub, min = -100, max = 100))
y <- c()
index <- 1
# Coefficients
gamma00 <- 18
gamma01 <- 0.5
beta1 <- -100
w <- runif(numSub, min = -3, max = 3)
uo <- rnorm(numSub, mean = 0, sd = 0.1)
meanBeta0 <- mean(gamma00 + gamma01*w + uo) # I should be able to retrieve that parameter.
for(j in 1:numSub){
for(i in 1:numObj){
y[index] <- gamma00 + gamma01*w[j]+ uo[j] + beta1*x[i] + e[index]
index <- index + 1
}
}
dataFrame2 <- data.frame(y = y, x = x, subNo = factor(rep(1:numSub, each = numObj)), objNum = factor(rep(1:numObj, numSub)))
model2 <- lmer(y ~ x +
(1 | subNo), data = dataFrame2)
summary(model2)
anova(model2)
No conceptual mistake here, just a mixed up index value: you should be using index rather than i to index x in your data generation loop.
Basically due to the mix-up you were using the first subject's x values for generating data for all the subjects, but using the individual x values in the model.
I have written a small function that simulates data from a normal distribution, how it is usual in linear models. My question is how to get a model with a pvalue of sim[, 1] == 0.05. I want to show that if I add a random variable even it is normal distributed around zero with small variance N(0,0.0023) , that pvalue of sim[,1] changes. The code below shows the true model.
set.seed(37) # seed for reproducability
simulation <- function(b_0, b_1,n,min_x_1 ,max_x_1,sd_e){
mat <- NA
x_1 <- runif(n = n, min = min_x_1, max =max_x_1)
error <- rnorm(mean = 0,sd = sd_e, n = n )
y <- b_0 + b_1*x_1 + error
mat <- matrix(cbind(x_1,y), ncol = 2)
return(mat)
#plot(mat[,1],mat[,2])
}
sim <- simulation(10,-2,10000,-10,70,0.003)
summary(lm(sim[,2] ~ sim[,1] ))
I'm working on a binomial mixture model using OpenBUGS and R package R2OpenBUGS. I've successfully built simpler models, but once I add another level for imperfect detection, I consistently receive the error variable X is not defined in model or in data set. I've tried a number of different things, including changing the structure of my data and entering my data directly into OpenBUGS. I'm posting this in the hope that someone else has experience with this error, and perhaps knows why OpenBUGS is not recognizing variable X even though it is clearly defined as far as I can tell.
I've also gotten the error expected the collection operator c error pos 8 - this is not an error I've been getting previously, but I am similarly stumped.
Both the model and the data-simulation function come from Kery's Introduction to WinBUGS for Ecologists (2010). I will note that the data set here is in lieu of my own data, which is similar.
I am including the function to build the dataset as well as the model. Apologies for the length.
# Simulate data: 200 sites, 3 sampling rounds, 3 factors of the level 'trt',
# and continuous covariate 'X'
data.fn <- function(nsite = 180, nrep = 3, xmin = -1, xmax = 1, alpha.vec = c(0.01,0.2,0.4,1.1,0.01,0.2), beta0 = 1, beta1 = -1, ntrt = 3){
y <- array(dim = c(nsite, nrep)) # Array for counts
X <- sort(runif(n = nsite, min = xmin, max = xmax)) # covariate values, sorted
# Relationship expected abundance - covariate
x2 <- rep(1:ntrt, rep(60, ntrt)) # Indicator for population
trt <- factor(x2, labels = c("CT", "CM", "CC"))
Xmat <- model.matrix(~ trt*X)
lin.pred <- Xmat[,] %*% alpha.vec # Value of lin.predictor
lam <- exp(lin.pred)
# Add Poisson noise: draw N from Poisson(lambda)
N <- rpois(n = nsite, lambda = lam)
table(N) # Distribution of abundances across sites
sum(N > 0) / nsite # Empirical occupancy
totalN <- sum(N) ; totalN
# Observation process
# Relationship detection prob - covariate
p <- plogis(beta0 + beta1 * X)
# Make a 'census' (i.e., go out and count things)
for (i in 1:nrep){
y[,i] <- rbinom(n = nsite, size = N, prob = p)
}
# Return stuff
return(list(nsite = nsite, nrep = nrep, ntrt = ntrt, X = X, alpha.vec = alpha.vec, beta0 = beta0, beta1 = beta1, lam = lam, N = N, totalN = totalN, p = p, y = y, trt = trt))
}
data <- data.fn()
And here is the model:
sink("nmix1.txt")
cat("
model {
# Priors
for (i in 1:3){ # 3 treatment levels (factor)
alpha0[i] ~ dnorm(0, 0.01)
alpha1[i] ~ dnorm(0, 0.01)
}
beta0 ~ dnorm(0, 0.01)
beta1 ~ dnorm(0, 0.01)
# Likelihood
for (i in 1:180) { # 180 sites
C[i] ~ dpois(lambda[i])
log(lambda[i]) <- log.lambda[i]
log.lambda[i] <- alpha0[trt[i]] + alpha1[trt[i]]*X[i]
for (j in 1:3){ # each site sampled 3 times
y[i,j] ~ dbin(p[i,j], C[i])
lp[i,j] <- beta0 + beta1*X[i]
p[i,j] <- exp(lp[i,j])/(1+exp(lp[i,j]))
}
}
# Derived quantities
}
",fill=TRUE)
sink()
# Bundle data
trt <- data$trt
y <- data$y
X <- data$X
ntrt <- 3
# Standardise covariates
s.X <- (X - mean(X))/sd(X)
win.data <- list(C = y, trt = as.numeric(trt), X = s.X)
# Inits function
inits <- function(){ list(alpha0 = rnorm(ntrt, 0, 2),
alpha1 = rnorm(ntrt, 0, 2),
beta0 = rnorm(1,0,2), beta1 = rnorm(1,0,2))}
# Parameters to estimate
parameters <- c("alpha0", "alpha1", "beta0", "beta1")
# MCMC settings
ni <- 1200
nb <- 200
nt <- 2
nc <- 3
# Start Markov chains
out <- bugs(data = win.data, inits, parameters, "nmix1.txt", n.thin=nt,
n.chains=nc, n.burnin=nb, n.iter=ni, debug = TRUE)
Note: This answer has gone through a major revision, after I noticed another problem with the code.
If I understand your model correctly, you are mixing up the y and N from the simulated data, and what is passed as C to Bugs. You are passing the y variable (a matrix) to the C variable in the Bugs model, but this is accessed as a vector. From what I can see C is representing the number of "trials" in your binomial draw (actual abundances), i.e. N in your data set. The variable y (a matrix) is called the same thing in both the simulated data and in the Bugs model.
This is a reformulation of your model, as I understand it, and this runs ok:
sink("nmix1.txt")
cat("
model {
# Priors
for (i in 1:3){ # 3 treatment levels (factor)
alpha0[i] ~ dnorm(0, 0.01)
alpha1[i] ~ dnorm(0, 0.01)
}
beta0 ~ dnorm(0, 0.01)
beta1 ~ dnorm(0, 0.01)
# Likelihood
for (i in 1:180) { # 180 sites
C[i] ~ dpois(lambda[i])
log(lambda[i]) <- log.lambda[i]
log.lambda[i] <- alpha0[trt[i]] + alpha1[trt[i]]*X[i]
for (j in 1:3){ # each site sampled 3 times
y[i,j] ~ dbin(p[i,j], C[i])
lp[i,j] <- beta0 + beta1*X[i]
p[i,j] <- exp(lp[i,j])/(1+exp(lp[i,j]))
}
}
# Derived quantities
}
",fill=TRUE)
sink()
# Bundle data
trt <- data$trt
y <- data$y
X <- data$X
N<- data$N
ntrt <- 3
# Standardise covariates
s.X <- (X - mean(X))/sd(X)
win.data <- list(y = y, trt = as.numeric(trt), X = s.X, C= N)
# Inits function
inits <- function(){ list(alpha0 = rnorm(ntrt, 0, 2),
alpha1 = rnorm(ntrt, 0, 2),
beta0 = rnorm(1,0,2), beta1 = rnorm(1,0,2))}
# Parameters to estimate
parameters <- c("alpha0", "alpha1", "beta0", "beta1")
# MCMC settings
ni <- 1200
nb <- 200
nt <- 2
nc <- 3
# Start Markov chains
out <- bugs(data = win.data, inits, parameters, "nmix1.txt", n.thin=nt,
n.chains=nc, n.burnin=nb, n.iter=ni, debug = TRUE)
Overall, the results from this model looks ok, but there are long autocorrelation lags for beta0 and beta1. The estimate of beta1 also seems a bit off(~= -0.4), so you might want to recheck the Bugs model specification, so that it is matching the simulation model (i.e. that you are fitting the correct statistical model). At the moment, I'm not sure that it does, but I don't have the time to check further right now.
I got the same message trying to pass a factor to OpenBUGS. Like so,
Ndata <- list(yrs=N$yrs, site=N$site), ... )
The variable "site" was not passed by the "bugs" function. It simply was not in list passed
to OpenBUGS
I solved the problem by passing site as numeric,
Ndata <- list(yrs=N$yrs, site=as.numeric(N$site)), ... )
I have a time-series which I need to fit onto an AR (auto-regression) model.
The AR model has the form:
x(t) = a0 + a1*x(t-1) + a2*x(t-2) + ... + aq*x(t-q) + noise.
I have two contraints:
Find the best AR fit when lag.max = 50.
Sum of all coefficients a0 + a1 + ... + aq = 1
I wrote the below code:
require(FitAR)
data(lynx) # my real data comes from the stock market.
z <- -log(lynx)
#find best model
step <- SelectModel(z, ARModel = "AR" ,lag.max = 50, Criterion = "AIC",Best=10)
summary(step) # display results
# fit the model and get coefficients
arfit <- ar(z,p=1, order.max=ceil(mean(step[,1])), aic=FALSE)
#check if sum of coefficients are 1
sum(arfit$ar)
[1] 0.5784978
My question is, how to add the constraint: sum of all coefficients = 1?
I looked at this question, but I do not realize how to use it.
**UPDATE**
I think I manage to solve my question as follow.
library(quadprog)
coeff <- arfit$ar
y <- 0
for (i in 1:length(coeff)) {
y <- y + coeff[i]*c(z[(i+1):length(z)],rep(0,i))
ifelse (i==1, X <- c(z[2:length(z)],0), X <- cbind(X,c(z[(i+1):length(z)],rep(0,i))))
}
Dmat <- t(X) %*% X
s <- solve.QP(Dmat , t(y) %*% X, matrix(1, nr=15, nc=1), 1, meq=1 )
s$solution
# The coefficients should sum up to 1
sum(s$solution)