I'm getting the following error when I'm loading tidyverse. It was all working fine
a few minutes ago when I was running my shinyapp. How should I resolve this?
Error: package or namespace load failed for ‘tidyverse’ in
loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.0.1 is already loaded, but >= 0.3.1 is required
I had the same problem but managed to tackle it. You may remove the current version of rlang using the following command:
remove.packages("rlang")
and then install the rlang again:
install.packages("rlang")
After that run the library:
library(tidyverse)
I know this is an old question but I faced this same problem. I restarted R session and it worked fine after that. Hope this helps someone! :)
In addition to unloading and reloading rlang,
Click on Tools in the tab and check for Package Updates to update tidyverse
Also had similar problem but resolved it after a struggle. I used:-
devtools::install_github("tidyverse/tidyverse")
I have just encountered the similar problem.
The error could translate into understandable English as:
package 'rlang' version 0.3.0.1 is loaded into R successfully, but the other package that based on 'ralng' required a higher version (at least 0.3.1).
So that manually install.packages('rlang') will update the latest appropriate package 'rlang'
I know this might be late answer,but I had the same issue and I fixed it by updating the packages, specifically : ggplot2, scales. according to this Rstudio site
Start with install.packages("devtools") then install.packages("rlang").
Related
I'm getting the following error when I'm loading tidyverse. It was all working fine
a few minutes ago when I was running my shinyapp. How should I resolve this?
Error: package or namespace load failed for ‘tidyverse’ in
loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.0.1 is already loaded, but >= 0.3.1 is required
I had the same problem but managed to tackle it. You may remove the current version of rlang using the following command:
remove.packages("rlang")
and then install the rlang again:
install.packages("rlang")
After that run the library:
library(tidyverse)
I know this is an old question but I faced this same problem. I restarted R session and it worked fine after that. Hope this helps someone! :)
In addition to unloading and reloading rlang,
Click on Tools in the tab and check for Package Updates to update tidyverse
Also had similar problem but resolved it after a struggle. I used:-
devtools::install_github("tidyverse/tidyverse")
I have just encountered the similar problem.
The error could translate into understandable English as:
package 'rlang' version 0.3.0.1 is loaded into R successfully, but the other package that based on 'ralng' required a higher version (at least 0.3.1).
So that manually install.packages('rlang') will update the latest appropriate package 'rlang'
I know this might be late answer,but I had the same issue and I fixed it by updating the packages, specifically : ggplot2, scales. according to this Rstudio site
Start with install.packages("devtools") then install.packages("rlang").
I have installed ggplot2 in R but when I try to load it, R gives this ERROR message:
library(ggplot2)
Error: package or namespace load failed for ‘ggplot2’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]): namespace ‘rlang’ 0.4.6 is already loaded, but >= 0.4.7 is required
What should I do?
Thanks in advance.
Install the full tidyverse package, it will load all graphics dependencies include gglot2 and its dependencies too.
install.packages("tidyverse")
As mentioned here:
https://community.rstudio.com/t/i-cant-load-ggplot2-in-my-library-in-r-version-3-4-3/6466
I am working on WINDOWS OS and I had same problems with loading ggplot2 and other libraries. I tried to install it like it was suggested in other threads, but it didn't solve the problem. I found some similar issues in other topics, and i figured out that my Rstudio console wanted to have fresh a toolchain bundle called Rtools. It can be downloaded from CRAN REP.
You have to pick appripiote version for your Rengine version. If you do not know what version of R you have, you have to simple type R.version in console, and then download proper version of Rtools. After that, i updated every libraries in Rstudio. ggplot2, tidyverse and many other are working properly from that time
I hope that it could help somebody :)
I'm getting the following error when I'm loading tidyverse. It was all working fine
a few minutes ago when I was running my shinyapp. How should I resolve this?
Error: package or namespace load failed for ‘tidyverse’ in
loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.0.1 is already loaded, but >= 0.3.1 is required
I had the same problem but managed to tackle it. You may remove the current version of rlang using the following command:
remove.packages("rlang")
and then install the rlang again:
install.packages("rlang")
After that run the library:
library(tidyverse)
I know this is an old question but I faced this same problem. I restarted R session and it worked fine after that. Hope this helps someone! :)
In addition to unloading and reloading rlang,
Click on Tools in the tab and check for Package Updates to update tidyverse
Also had similar problem but resolved it after a struggle. I used:-
devtools::install_github("tidyverse/tidyverse")
I have just encountered the similar problem.
The error could translate into understandable English as:
package 'rlang' version 0.3.0.1 is loaded into R successfully, but the other package that based on 'ralng' required a higher version (at least 0.3.1).
So that manually install.packages('rlang') will update the latest appropriate package 'rlang'
I know this might be late answer,but I had the same issue and I fixed it by updating the packages, specifically : ggplot2, scales. according to this Rstudio site
Start with install.packages("devtools") then install.packages("rlang").
This is the error message:
Error: package or namespace load failed for ‘ggplot2’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.4 is already loaded, but >= 0.4.0 is required
In addition to a Warning message:
package ‘ggplot2’ was built under R version 3.6.1
Please help. Thanks a lot.
Just providing a more complete answer for people to follow.
Remove packages with
remove.packages("rlang")
That may not work as you may need to delete the package from your R library. To find where you R library is run
.libPaths()
Once you've deleted the rlang folder from there you can restart R and run
install.packages("https://cran.r-project.org/src/contrib/Archive/rlang/rlang_0.4.9.tar.gz", repo=NULL, type="source") # for specific rlang version, in this case 0.4.9. For latest version can run install.packages("rlang")
packageVersion("rlang") #to check you now have rlang version you want
Figured just a slight modification to the first answer worked best for me:
restart R, then:
remove.packages("rlang")
remove.packages("dplyr")
install.packages("rlang")
install.packages("dplyr")
library(rlang)
library(dplyr)
My solution is to restart R and then update all the packages.
update.packages(ask = FALSE)
The problem with just removing & installing rlang, and then your desired package (here ggplot2), you might find there are other packages you have remove and install. Best to update all and save time.
Problem solved by updating the R and Rstudio, removing "rlang" package and reinstalling the package, removing "ggplot2" package and reinstalling the package back.
Just update your R package, because there is a new update in the ggplot2 package which supports the higher R ver, it should be 3.6.3 and greater !
I'm getting the following error when I'm loading tidyverse. It was all working fine
a few minutes ago when I was running my shinyapp. How should I resolve this?
Error: package or namespace load failed for ‘tidyverse’ in
loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.0.1 is already loaded, but >= 0.3.1 is required
I had the same problem but managed to tackle it. You may remove the current version of rlang using the following command:
remove.packages("rlang")
and then install the rlang again:
install.packages("rlang")
After that run the library:
library(tidyverse)
I know this is an old question but I faced this same problem. I restarted R session and it worked fine after that. Hope this helps someone! :)
In addition to unloading and reloading rlang,
Click on Tools in the tab and check for Package Updates to update tidyverse
Also had similar problem but resolved it after a struggle. I used:-
devtools::install_github("tidyverse/tidyverse")
I have just encountered the similar problem.
The error could translate into understandable English as:
package 'rlang' version 0.3.0.1 is loaded into R successfully, but the other package that based on 'ralng' required a higher version (at least 0.3.1).
So that manually install.packages('rlang') will update the latest appropriate package 'rlang'
I know this might be late answer,but I had the same issue and I fixed it by updating the packages, specifically : ggplot2, scales. according to this Rstudio site
Start with install.packages("devtools") then install.packages("rlang").